OutRun Seated Arcade1Up In-Depth Review - PLUS Hidden Test Menu Revealed and Calibration Guide

[@Hidyman]

7:30 That is not a weight on the cable. It's a ferrite choke that helps to stop high frequency interference.

[@watsomd]

I concur, almost laughed my self silly when he called it a weight for the cable.

[@JeffMercedesC]

I just received a email saying my Outrun arcade cabinet is in transit and is supposed to be delivered on Friday. Finally!!

[@ebbbbs]

Hopefully it will be delivered to my house by accident. Im in Ireland.

[@keiranninjaspirit]

Hi, have you built cab.. Hope your having fun with it🎉

[@midnitepagan9118]

Just waiting patiently for 1 up arcade to do a daytona/sega rally cab

[@totophi]

Or, you know, follow the mod instructions in the meantime

[@larrytaylor2692]

Damn no vibration in the wheel either that was a signature of outrun in the arcade always got me to play it

[@gopats85]

Kind of a deal breaker especially with it being a racing game force feedback is the way to go.

[@totophi]

I can’t remember whether the MAME emulations of any of these included code for force feedback... 🤔 Anyone?

[@KongsRUs]

you can download a force feedback plugin that will work with MAME and a PC wheel that has FFB

[@DannyWelch]

OMG! I was having trouble driving and thinking to myself "I don't remember OutRun being this hard to steer". A quick calibration and it's like a whole new game! Thanks!

[@KelpPardue]

I recently purchased the Sit Down version of Outrun and I’m really enjoying it so far! For reference.. I’m 5’10”, 160 pounds and find the cab very accessible for the cost, absolutely! My only issue was that I found it more comfortable to turn the bench backwards because I disliked stepping over the side walls each time off and on the bench. Bench height(top of the cushion) is 14.5” off the floor for anyone concerned.

[@KongsRUs]

not a bad idea to flip it, but then you have the sides hanging out the back into your arcade haha

[@loyaltyman2000]

Oh my gosh!! This is so cool. Arcade 1Up sure do know there stuff when it comes to making portable arcade cabinets.

[@Mightywhiskaz]

I did a really simple fix to make my sit down comfortable. Put the pedals inside the cab. Drilled a hole for the wire to pop out the back a little. Put a wood block under the pedals to prop then up at an angle and removed the panel with the game logos for more leg room. I sit with my legs extended comfortably and am much closer to the screen so I dont have to lean in or scrunch up to hit the pedals

[@KongsRUs]

Nice simple mod!

[@gamer_guts9836]

Would be so cool if someone added SEGA's "18 Wheeler" Arcade version on this cab.

[@garrypeak4277]

That would be beyond epic....

[@JeffMercedesC]

After you measured the Outrun steering wheel center emblem on your unboxing video I ordered a Ferrari steering wheel horn emblem logo decal on eBay. It will look much nicer than the Arcade1up steering wheel sticker.

[@KongsRUs]

nice! i need a replacement now that i've started to peel mine. lol

[@IamMarkSmith]

Replace the center Arcade 1Up logo sticker with a Ferrari logo. That would look so much better.

[@KongsRUs]

thats the plan! there's a few arcade graphics places that will have em like ArcadeGraphix.com

[@005AGIMA]

1up couldn't because Ferrari are REALLY tight on licencing. The Nintendo Switch version of Outrun isn't a "Ferrari" anymore either. Just something that "looks similar". It's all down to copyright.

[@3rdFloorArcade]

Great stuff Kongs-R-Us, thanks for the in depth review on this. The games, artwork and steering wheel look great 👍

[@Madlou]

Great review. You need to do more reviews.

[@KongsRUs]

thanks! I'll try, but I'm running out of space for new cabs, lol

[@billybobs1705]

@@KongsRUs won't be touching that one. Outrun is just a dreamcast or playstation port as there s no ferrari logo on the car

[@KongsRUs]

@@billybobs1705 @RetroRalph did a video that showed it's a true arcade port, but Code Mystics removed the art in game due to licensing kzbin.info/www/bejne/g6m8hKpjm5xkgq8

[@RetiredRetro1]

Great review! And pre-orders just opened up again yesterday!

[@jeffreysabec6177]

Great review loved watching it

[@pirajacinto4]

WOAH!! They released something like this?! That's AWESOME!

[@rondoshane]

Awesome and informative review! I really learned a lot about the cab, settings and options. Unfortunately, I am 6' 4" 237 lbs so I will have to wait for a stand up version. But I am interested in this cab more now than ever.

[@keiranninjaspirit]

Hi, you need to get yourself the real deal at your size.. Full sit down arcade version

[@FlipperManiac]

would be cool, if you could race outrunners with a second player, maybe in network?

[@dillonjay6041]

I’m jealous. Mine still shows it’s shipped with a label printed but no movement. Thanks for the review!

[@gamer_guts9836]

same.

[@zro2gon]

@@_JUG_ you can order it through gamestop

[@coderedclips4195]

Same..

[@gamer_guts9836]

Update: just got a notification from UPS boys...looks like mine arrives tomorrow! Happy days.

[@coderedclips4195]

@@gamer_guts9836 mines comin 11/30 just got same update

[@kantidinda6218]

Thanks for posting, great review

[@SteveBrandon]

I can't afford this, don't have the space for this, and am too big for the sitdown version anyway but it's cool that this exists (even though it's the de-Ferrari-ed versions of both OutRun and Turbo OutRun). I just hope that Sega finally doing something with OutRunners for the first time in decades is a sign that the arcade version of OutRunners will soon be officially available on consoles and on Steam (yes, I know MAME exists, but I still want to be able to own it).

[@JeffMercedesC]

I'm jealous! My order says- (Shipper created a label, UPS has not received the package yet.) The same message has showed since Thursday. I contacted Arcade1up and they responded right back to me saying UPS has not picked up the package yet and they are hoping UPS will pick it up today. Seriously come on already UPS..

[@KongsRUs]

hopefully soon!!!

[@dillonjay6041]

Me too man! Same exact thing! Lol

[@DeputyVanHalen5150]

@@dillonjay6041 I'm in Ohio and Fed Ex tracking shows mine in the Chicago area already. Hope that they aren't toying with me. LOL 🤔😁

[@dillonjay6041]

Just shipped out of LA Van Halen! I’m in California so I’m showing a Wednesday delivery. Let’s cross our fingers bro. Lol

[@DeputyVanHalen5150]

@@dillonjay6041 Excellent!

[@bumpyfrankles]

You're the King, Kong.

[@kitluong2474]

Great work mate! Appreciate the stream and follow up vid 👍

[@spookytanooky]

This is a really good review. I love how well you explain every detail. Can you review the X-Men vs Street Fighter cabinet?

[@KongsRUs]

I dont plan on getting x-men v SF, but I did order Marvel vs Capcom! hope to do a full review when it comes out

[@Backtothehat]

Thanks for the review!

[@wesleyjackson1222]

Great job!!! THANKS FOR THE VIDEO!!!

[@adamkalb1412]

UR THE BEST BEE KONG! IMPRESSIVE REVIEW

[@DreamcastKyle]

Can’t wait until mine comes next week 👍💪

[@NopeorDopeReviews]

congrats on 1k man!

[@KongsRUs]

thanks man!

[@DeputyVanHalen5150]

Just wanted to let you know about the ribbon cable on the rear of the pcb. That's not a weight, it helps reduce interference brother. My OutRun tracking is showing up in the Chicago area already. Almost home... Happy Thanksgiving, thanks for sharing. God bless.

[@KongsRUs]

thanks for the insight!! I hadn't seen it before on any cabs so good to know

[@DeputyVanHalen5150]

@@KongsRUs I meant to type interference. Not interface* Sorry. LOL It reduces interference and isn't a weight on the ribbon cable.

[@uknowmyname007]

If they made one with Daytona USA, Virtua Racing, and Super Monaco GP on it, I'd definitely buy one.

[@daviddipilla]

If they made Daytona i would buy in a heart beat

[@QCJSiteB]

I need a Daytona USA 1/2 cab. But one actually built well.

[@daviddipilla]

Me to!!

[@davidhill2444]

Another awesome review, good job.

[@Breakskru]

I can see kids being the culprit of broken pedals

[@jimpowers2257]

Great review 👍🏼

[@barbied.5932]

A big thank you for this video! I just bought this one, and couldn’t find a manuel on how it works. I am a newbie. Also no instructions on test menue. How do the makers expect us to be knowledgeable? Call the techs everyday?

[@4shadow849]

⭐ My guess: The "Easter Egg" is that you can run a double ended micro USB cable from one Outrun cabinet to another 2nd Outrun cabinet (if you buy 2 cabinets) and you can race in a two player mode against eachother.

[@MystiqEevee]

So basically.... it's a linkplay cabinet much like the original old versions of cruisin and stuff

[@figment1988]

@@MystiqEevee yes. For the moment, this looks like it could be for just OutRunners. However there is an alternate version of Power Drift which was exclusive to Japan which has link up racing capabilities.

[@RedRanger2001]

@@figment1988 Nope, this article doesn't say anything about the link-ups for the Power Drift... tcrf.net/Power_Drift_(Arcade)

[@RealziesCuts]

Stay Savage Arcades for LIFE 💫

[@atranfanatic]

Awesome review man! Maybe I could sit down comfortably playing this after all being 6' 5" and such. lol And like I suggested on your build stream, put a Ferrari logo on the horn cap. And of course put Sega logos all around the cabinet to make it look better. Anyway there are so many racing games made, that could work with this cabinet when you mod it. I modded the Frogger Arcade1up with a custom 2 player control panel along with 20 buttons. Running off a Raspberry Pi 3B+, a cheap amp, a volume control knob hidden underneath the control panel., two 4" speakers under the control panel. (the J panel piece) Also I have extra USB hookups to connect a flight stick, steering wheel and pedals, trackball, spinner etc... I also got a Space Invaders 40th Arcade1up cabinet cheap. That I will be running off an older computer tower, a custom 4 player control panel, as well as hookups for all kinds of different controllers, sticks, trackball, spinner, steering wheel and pedals etc... As well as an amp, extra speakers, volume control knob and 40 buttons. The tower will more than likely running of off Launchbox for the front end.

[@segasaturn6800]

Amazing Out Run ! Cute and pretty 😀

[@BT3985]

I feel a little better about the sitting position. I was worried when I watched your other video. But since the bench is shorter and I’m a couple inches shorter than you so I might be ok. I’m still interested in what kinda mods people are gonna do and might end up doing the same. Hopefully my cabinet gets here soon!

[@KongsRUs]

agree that I had it all wrong in my live unboxing! wanted to give it a proper review and show the spacing isn't as bad. as long as you imagine you are in a Go-Kart instead of a car, then it helps with the mental spacing too that it feels too cramped. lol

[@jamesdunn8893]

I never played outrun before it looks great

[@gooberthoreau]

I think these kind of cabs (like the Star Wars one) are more suited for this sort of high priced emulation box because it offers something that you can't get as easily DIY.

[@dgimagery]

Great in depth review, can't wait for it to come in and share one of my favorite games with my son! Do you have any plans to mod the bench with a real seat like you did on the Star Wars? I was thinking on building some kind of platform to put the whole cab on just so it sits higher and matches better height wise overall with the rest of my arcades.

[@KongsRUs]

yes! I have a cruisin exotica bucket seat i plan to mod the bench and possibly raise the cab itself

[@Buttafingaz]

Awesome Review! 👏🏽👏🏽👏🏽

[@schlesinger29]

I would like to see 1up release a cruisn caninet

[@KillerArcadeGames]

These pedals are giving me Gen 1 Rock Band drum vibes big time!

[@KongsRUs]

exactly! but even those were made to stand the test of time and I still have my rock band pedals. I don't think these would last that long

[@KillerArcadeGames]

@@KongsRUs Mine cracked. I ended up buying a replacement piece that was made of wood haha. I was a pretty serious Rock Band player though. That was my first KZbin channel haha. I still play on an E-kit using the MIDI adapter. #nerd!

[@KongsRUs]

@@KillerArcadeGames lol, love it!!! I remember my rock band days for sure, good times!!!

[@ThomasGrillo]

Really enjoyed this review. I would highly recommend building a custom riser, maybe 3, or 4 inches high, at most, so you can get the pedals, feet and knees in a more comfortable position. Next, loose the bench, and bring in a nice, comfortable office / gaming chair. I agree with you. Those pedals should've been made with either thicker plastic, metal, or a combination of the two, for the levers. I wouldn't count on those lasting the first year. Thanks for the video.

[@KISSFan1977]

i am on the fence about one, i want it but the space i have is killing me sense i got 5 arcade 1up cabs already

[@jasonlo8780]

Bro I'm going through the same thing I think they will have a stand up version in 2021

[@iheartalea821]

Looks cool, can't wait to see what you do to it

[@keiranninjaspirit]

The games look good but the csb looms too small. The design would have been better if the machine was on a riser and ths seat part couks be higher but that said. Hats off ti arcadec1up for attempting such a off the wall cabinet. I think its great for kids and 20 somethings that missed out in the eighties arcades and hope they continue to release unique cabs as we all need a smile and they do make me smile these compact cabs...

[@FROSTINATOR]

One last question about the bench. Under the cushion is there an enclosure or bottom piece or is it juat open to the floor? Im asking because i was thinking a subwoofer could be put under the bench cushion maybe? Thanks!

[@KongsRUs]

yes, there's space under the bench, 2 cross sections, and then the 2 panels on the side make a rectangular space u could fit a sub inside

[@FROSTINATOR]

@@KongsRUs cool! So it's not just the floor itself you see under the cushion it's enclosed?

[@KongsRUs]

@@FROSTINATOR oh, there not a board on the bottom to enclose it, just floor. but you could easily make a bottom if you needed to

[@ryansproviero]

Decent attempt by A1Up but still plenty of work to do to make the racer fans content. From a basic design standpoint I think they could have made the deck wider with it going past the sides like Jam. Would have given it a bigger feel and allowed the wheel to be centered and more room for the shifter. The problem is the bench fabric and pedal quality. It's only a matter of time before we hear about tears in the bench from buttons on jeans and broken pedals from grunts that have no control when they're playing and just jam the pedals. I'm about 6 ft so adding 2 inches to your eye level in the video concerns me.

[@KongsRUs]

maybe your legs will be 2 inches longer instead of your torso? lol, it feels very go-kart ish

[@ryansproviero]

@@KongsRUs Honestly I feel like I do have long legs lol. That simply raises the next issue of my knees hitting the wheel.

[@MySamurai77]

Also, if Out runners works flawless, i will be extremely surprised as the MAME devs have been trying and failing at that for 20 odd years. Good luck with those transparency effects!

[@StarFyre]

Back in college, the local fish & chip shop had an OutRun console, and every single name on the leaderboard was mine. The thing about it was that if you made even the slightest mistake you couldn't finish - you could see the banner showing the finish line and bah fail. I'd buy that Arcade1 machine but (1) I have no money and (2) if I did buy it, I'd end up getting a frying pan smacked on my head.

[@indangerdogg637]

Looks Awesome ..!! Cant wait.. I bet the Easter Egg is that you can connect 2 cabs together..!!!

[@SoulforSale]

Would there be indications of that in the menus?

[@KongsRUs]

I havent seen anything in the menus that would indicate networking yet, but ill keep tinkering around

[@randyiron2]

Good job on the review! You did well!

[@KongsRUs]

@@randyiron2 thank you!

[@kevinsmith5912]

Can't wait to see the mods for these...imagine playin need for speed or rush 😩

[@BillC-64]

Those brake peddles will not last.

[@KongsRUs]

I hope people don't end up breaking them, but good so far with casual use

[@derrikadams3375]

I can see 3rd party making better petals for people to buy

[@005AGIMA]

Who uses the brake anyway? :D

[@garyabernethy2]

i still dont know whether i should go for this or keep my fingers crossed for a cruisn one

[@Retromaster364]

It would be awesome if arcade1up made an Initial D cabinet with online muliplayer.

[@magnusdiridian]

Now let's get a Pole Position cab, with pole position 2, sprint(1976), super sprint, and paperboy!

[@2Dai4]

Good review b 👌👍

[@KongsRUs]

thanks Bro! can't wait to collab with you on this

[@2Dai4]

@@KongsRUs yup can’t wait 😝

[@BignzJoint]

Does the steering have a deadzone? Looks like you turn a bit before the screen reacts

[@KongsRUs]

no deadzone, if you go to the end of the video where I test ENG mode, you can see the sensitivity of the wheel picking up at the slightest turn. the gameplay emulation it self might have some limitations of reading it immediately. almost like a software deadzone, but in terms of the wheel itself, it registers perfectly in test modes

[@Tee-qc2cy]

Excellent video, thanks for sharing. The controls actually look decent and it seems to be really sensitive. Better than I expected, now can you be the 1st to find the Easter egg? 😊

[@KongsRUs]

I'll try!

[@RandomHajile-j7z]

@@KongsRUs Is it a linked mode between two cabinets for Outrunners?

[@KongsRUs]

@@RandomHajile-j7z possibly! don't have another cab to test, but I plan on modding it soon and networking it with my star wars cab for multi player fun :)

[@SoulforSale]

The people who work for Arcade1up are marketing execs not enthusiasts. They should get some actual gamers and some people who were actually in the arcades on board to help them develop these interfaces.

[@phillychick]

Agreed. As a fairly decent Tempest player, I could have told them their stock spinner is utter garbage. 😜

[@KongsRUs]

didn't they start that beta testers program tho?? wonder how thats going 🤔

[@SoulforSale]

@@KongsRUs midgets. They were all midgets

[@homiedclown]

@@SoulforSale Arcade 1Up is where all the Oompa-Loompas went to work after Willy Wonka got caught as the head of a pedophile ring and had to close his Chocolate Factory.

[@yellow98gt]

That's why they are the ArcadeFup

[@phillychick]

Great review! Almost makes me want to buy Outrun, even though I am not really into racing games. 😉 I also agree about the overall quality of the shifter and pedals, but can also see A1Up trying to keep the price point reasonable for the casual customers. And both of those components could likely be upgraded fairly easily.

[@KongsRUs]

Thanks! Do you have other games you are crazy good at too? I could see hard core gamers maybe going a little too hard on these parts, but they should be fine for casual use

[@phillychick]

I am also fairly decent at Tempest and can reach the yellow tubes on a regular basis (which is about mid-level on the grand scheme of things). I posted some Tempest game play videos with the stock spinner a couple years ago, and a handful with the TurboTwist2. I haven't been playing as well lately, but may post some game play with the GRS spinner if/when I get my groove back.

[@DeputyVanHalen5150]

I wonder if this seated cab will look out of place next to an Arcade1up on a riser? What are your thoughts?

[@KongsRUs]

there's already been the star wars sit down ive seen next to an A1up on a riser. as long as you have the space, it looks fine I think

[@totophi]

22:58 “modding potentiability” - Wow. I had no idea I’d be learning new tech terms. 😏

[@KongsRUs]

lol, I didn't even realize it. 😂 potential+ possibility = Potentiability It's since been modded tho, so success!

[@totophi]

@@KongsRUs : Yeah, good on you. Thanks for empowering others to dream!

[@JohnE.Blayze]

Is the art under the screen on the map protected? Or will it rub off if I sit a drink on it?

[@KongsRUs]

sadly no cover, wouldn't recommend putting a drink on without a coaster

[@FROSTINATOR]

What is the seat hieght measurement? Floor to top cushion. Thanks!

[@KongsRUs]

about 14.5", im on carpet so give or take a little

[@FROSTINATOR]

@@KongsRUs thanks so much!

[@VisionThing]

Any mod instructions out there on attaching the pedals to the cabinet? I’d also want to attach the lower base to the cabinet with some adjusting room. And can you just swap out the pedals? Why can’t these just be features out of the box, I hate having to work on these.

[@KongsRUs]

the pedals fit into the groove nicely so they shouldn't move. if you wanted to put it inside the cab and have it adjustable, you'd have to do some heavy modding to the cab go make it work. I made a full video on how I finished modding my outrun cab: kzbin.info/www/bejne/a3rYh5-eqcSHg68

[@VisionThing]

@@KongsRUs Thank you, I will watch it for sure! Did you mount the pedals inside your cabinet? I think that’s going to be a necessary mod to get the angle right, no?

[@KongsRUs]

@@VisionThing I dropped my seat and raised the cab with a custom riser. I didn't need to angle the pedals, but im using P33 logitech set now

[@VisionThing]

@@KongsRUs Ah gotcha. And you just screwed them to the back plate? I’ll watch the video bit very curious on the pedals, as I’ve had some pedals flying around and it’s horrible XD

[@superpcengine]

lol outrunners still has the glitchy waterfalls like in mame. great job arcade1up

[@MystiqEevee]

And we can't have any of these settings on previous cabinets why? seriously they're just now deciding to add all these options menus

[@KongsRUs]

look for A1up cabs that have Code Mystics doing the emulation. they've been behind some of the better A1up cabs with these option menus

[@casualgamer2006]

i love outrun i hope they make a standup version ..Waiting for Marvel vs capcom cab hopefully it will release on time 12/4

[@KongsRUs]

they have a stand up version planned to release next year! im waiting for N MvC too

[@hughey106]

Yea I ordered it back in October the release changed 3 times so hopefully it does come in on the 4th I can't wait

[@lock7852]

Subbed,great review

[@KongsRUs]

thank you!!

[@pandaraph]

outrunners alone makes this a sale for me. my god what a fucking glorious game

[@PikaStu666]

Needs modified with a Recaro race seat!

[@totophi]

Why not a rollcage and fire extinguisher while you’re at it?

[@ShinobiShowdown]

Why did they not put the riser on it and rise up the bench so people can fit in better?

[@VeganRashad]

Batman will be awesome on this!

[@KongsRUs]

there's no triggers on the wheel tho, :(

[@derekdeitlaf4647]

Can you email me how to revert my pinball table to stock they took down your video and I need the help

[@FKCHOPPER]

I need help …. I did the calibration test and when i got on the calibration screen my steering red indicator was all the way to the left and i cant move it to the right and now i dont have any steering functions at all ….. is there a way to fix this … thanks for any info

[@KongsRUs]

sorry, but i haven't haven't tested a stock outrun in a while. Maybe there's a way to reset the controls, but it sounds like you might be having issues with your wheel in general. i'd recommend taking off the back plate behind your control panel and double checking the 3 pin connection from your wheel into the encoder. Then you can try accessing the calibration screen again to see if it registers. good luck!

[@Jpilgrim30]

They should’ve partnered with Logitech or something for a force feedback wheel. It would be worth the extra price

[@deshirabrinson272]

Do anybody know if it has the same sound track as out run 2005?

[@KongsRUs]

these are all the classic outrun games, so not sure if they have anything from the modern outrun game music on here

[@adrianluna9541]

It doesn’t shake though!

[@davidissel7980]

I think Arcade1Up missed the boat on the Out Run cabinet. I like Out Run, but the perfect cabinet would have had a better assortment of games. So, Out Run, Pole Position, Hard Drivin', and Super Off Road.

[@KJW648]

Add a forward fan

[@128Kgames]

So fan with almost little to no airflow? Unless I'm missing something I'm not seeing any real ventilation on the PCBA cover. Should had added more louvers to increase airflow otherwise that fan is useless.

[@garrypeak4277]

Just wondering how tall this dude this? I’d love this machine, but I’m 6’1”. Feel like my knees would be under my chin.

[@KongsRUs]

I'm 5'10"! but taller guys would definitely feel uncomfortable in the stock bench seat

[@garrypeak4277]

@@KongsRUs Thanks mate. I may have to go with a stand-up. I saw my first 1up cabinets yesterday, along with the Star Wars pinball....they all look amazing but they all looked smaller than I thought they’d be...even with the riser. I knew they were scaled down versions tho.

[@gordons-alive4940]

Wonder if its possible to use the controls with a mod?

[@KongsRUs]

we will find out soon!! thinking of live streaming tonight or tomorrow to open it up

[@shawnward3160]

does the wheel vibrate when u go off road or crash

[@KongsRUs]

there's no force feedback on this steering wheel unfortunately

[@shawnward3160]

@@KongsRUs thats bro

[@VcArena]

With out runners can you select mph instead of kmh?

[@KongsRUs]

not too sure! i don't have the stock PCB attached anymore so i can't check, but i don't remember seeing a setting to switch to MPH

[@yeksun]

Am I the only one that noticed that the car is WRONG on Outrun . what the heck!! Why can they not make a cabinet that has these flaws? Whats so hard with having the same car as the original?

[@LezardMan002]

Because the original vehicle is a ferrari. In other words, they would have to deal with copyrights in order to have that ferrarri in the game. So to avoid having to pay extra for copyrights, they used an alleged car instead.

[@SeriousThrill]

Sorry if this question was already answered but what is the overall length of the cab with the bench attached? Thanks!

[@KongsRUs]

the bench is adjustable so the bench length is 39" and the base of the cab is 19.75". hope that helps!

[@SeriousThrill]

@@KongsRUs thanks! Love your KZbin vids...you’ve sealed the deal for me to go for the sit down outrun! Outtunners was one of my favorite childhood arcade games of ALL TIME!

[@marmac7467]

I want it just for power drift

[@bigpapaonions4061]

Yup. Thats why i bought it. Got it today.....brought back old memories

[@johnnyretro1975]

WHEN CAN WE BUY THIS IN UK WILL THEY BE GETTING MORE OF THESE IM IN UK

[@KongsRUs]

not sure! I'm not associated with Arcade1up but hopefully continue to message them

[@tommy516]

Is the fan in yours really loud?

[@KongsRUs]

yep, i could definitely hear it when it was idle

[@mattnova18]

Those pedals look way too fragile. 2 months and they're broken for most people I bet.

[@marybetheby5184]

Cheap junk with issues galore..just like all the other ones..

[@joshuacumming4132]

How have the pedals hold up?

[@KongsRUs]

I eventually did a full PC mod so have used the pedals consistently over the past year. But to this date, I haven't seen anyone report a broken pedal set

[@ien2023]

Kong didnt get a lot of comments when he post his live stream on facebook. I guess people dont give a shit for Outrun. I personally think it looks cheap and cardboard and not worth the price. Their StarWars cab somehow looks more premium.

[@yellow98gt]

It's just another classic ArcadeFup