Next Level Racing Boeing Flight Cockpit Military Edition!!

Next Level Racing Boeing Flight Cockpit Military Edition!!
Today, we're taking a look at the Next Level Racing Boeing Flight Cockpit Military Edition!! This simpit is modular, comfortable, and priced appropriate for entry leve cockpits!
Purchase Here: nextlevelracing.com/?rfsn=703...
Patreon: / overkill_productions
Be sure to follow me on Twitch as well for future flights!!
Twitch - / overkillproductions
Subscribe for more Simulation Videos! / overkillsims
Share this video with a friend: • Microsoft Flight Simul...
Watch next -
Recommended Playlist -
Download My Tutorial Guides by becoming Patreon members ( Tier 2 )
/ overkill_productions
Flybywire A320 Full Flight Tutorial Guide
TBM-930/G3000 Full Flight Tutorial Guide
G1000 Full Flight Tutorial Guide
Cessna Citation Longitude Full Flight Tutorial Guide
747-800 Full Flight Tutorial Guide
Advanced Airbus MCDU Guide
Support The Channel:
Patreon: / overkill_productions
PayPal: www.paypal.com/donate/?cmd=_d...
Let’s connect:
Patreon: / overkill_productions
facebook - / overkill.simulations
Discord - / discord
Twitch - / overkillproductions
My Specs
Ryzen 9 3900XT
64GB DDR4 G.Skill RGBneo (Specifically engineered for AMD Ryzen)
Nvme Gen 4 M.2 storage
RTX 3080
4k resolution
Pimax 8Kx Virtual Reality Headset
#microsoftflightsimulator #msfs2020 #virpil

[@nuggetz9857]

I purchased one of these and love it. One mod I did was to cut a piece of 22mm plywood to rest on the horizontal members under the chair (102x40 cm) with a cut out (14x24 cm) for the centre post (keyboard vertical post bracket). This provides a smooth surface to help entry/exit to place feet especially in socks! It is also possible to mount one of the flat plates to the right of the stick elevated 3” to raise the mouse pad to a more comfortable level without interfering with the stick. Great content as always thank you.

[@OverkillSimulations]

Join my discord or email me pics! I'd love to see what you did. Kinda hard to picture it

[@nuggetz9857]

Photos sent to discord to show your sim rigs

[@VET0264]

I brought my pedals back to the center riser, then I zip tied my pads that came in it to the frame, works great

[@VET0264]

​@@OverkillSimulations I'd love to share my pit pics

[@hollywood8327]

I own one of these and love it! It's surprisingly comfortable and versatile. My recommendation is to pick up 2020 aluminum extrusion to cut and mount customs setups if you have switch panels, screens for gameglass, etc. But it's very easy to mount additional gear to. I even modified the keyboard mount using extrusions to place it where I need it in relation to the rest of my panels. Very solid chair. Highly recommend it.

[@gvii]

What I do like about it over my own rig at home is the notch in the front of the lower seat cushion. Mine uses a standard car seat and doesn't have that, which makes using a center mounted extended flight stick kind of goofy without having a massive crook in the extension. So I end up using mounted to the side without the extension, which I'm not overly fond of. I like having the extension as it does feel a bit more realistic(Especially in WWI & WWII sims, which are what I tend to focus on.), plus it does give you a bit finer control overall. So I do like the way that is setup a lot. Pretty cool.

[@OverkillSimulations]

Yeah I could totally see the advantage there! I have always really like side stick just because it's more comfortable for a heavier fellow like myself lol!

[@Blxz]

That centre mount flight stick potential is what sold me on this thing. Would be really interested to see what metal working mods you do to it as although I can do some metal working I find I lack imagination. Love to see what changes you end up making.

[@VET0264]

I absolutely love mine loads of fun yet many different types of custom placement options we're great Added a tpr pedals, winwing full gear

[@xUSAFWolfman]

You could fix all these issues if it was like an office chair where you can rotate to the left or right with sticks mounted to the chair frame so everything moves with you. Would add ability for height, tilt, etc. Just a bracket is needed to fit the shaft and connect the seat to back rest.

[@nopenotme6369]

This cockpit system is definitely on my things to upgrade too list, but at moment my modified Playseat Challenger will have to do.

[@DesignEagles]

Great to hear that golden vocal again!

[@larrysouthern5098]

Great looking sim set up!!!!

[@conlethbyrne4809]

I like the seat belts even if I wouldn't use them makes it very sporty. Have fun, especially after what you & your family were put through. Cool stuff & see you in the skies. Slainte, Con

[@ThorntonWillie]

You could get some movable type brackets with a lock to move one side where it will open

[@Wh1terider]

Good job sir. Thanks for the review

[@TheRooster76]

Would be able to give some more details on the one direction magnets? Where did you get them at and any long term complications with use?

[@cmhagstrom]

Those magnets are a great idea. Where did you get them and how do they attach to the stick?

[@perpetualomega]

Do you think you could video your alterations to the chair? how you make and why?

[@koenvandermaaten]

Thank you! I purchased their GTTrack flight sim edition a while back and absolutely love it. Here is my question: I’m dying to see if someone can do a review, specifically for Flight Sim, of Next Level motion plus platform. Perhaps you can persuade NLR to send you two of those (one for the front and one for the back)?😊

[@OverkillSimulations]

I sent them your request lol. We'll see what happens lol

[@VET0264]

To get in n out of the pit I move fhe front display all the way forward tighten the bolts n put a lanyard on to assist my exit

[@macgeek2112]

I have the NLR F-GT with triple monitor stand that I bought second hand. I added the Combat Flight Pack. I would not recommend my setup to flight sim enthusiasts as even the seat in the most forward position and the combat flight pack mounts and mounting platforms in the most aft position, my Warthog HOTAS just barely makes it to a comfortable position. Also, no notch in the seat or option for center stick. I can't really complain because I have much less $$ invested than MSRP and it's a good starter rig. I recently spec'd out the Monstertech the way I would want it and it came out to about $2500 (not including shipping), so I'll be stuck with the F-GT for a while... at least until I get my kid's college tuition paid off.

[@AhSoul]

Great video! Are there any dimensions anywhere? I can't really see any on the NLR site and want to get a feel for how high it is compared to my desk, how wide etc.

[@greenranger2764]

I think you should put a cat tree on the back of the chair so you can have kitty as your WSO! LOL Seriously though, that thing is cool as heck. I see a lot of potential with the framework of that system. It looks very sturdy and well put together. I'm so glad that your dad comes over to stoll enjoy flying. Great to see you doing videos again! ❤

[@OverkillSimulations]

LOL no animals allowed in the cockpit or on ramp ( my office ) SIr!! Thanks my friend!

[@paedrufernando2351]

@@OverkillSimulations I like that you take your flights so seriously...giving it due respect that it projects to you

[@Ginuwine-kx2iv]

If glad to put a face to over the video's I've watched. Thanks you for all the content you offer. Second that's to the idea about the PTO and combat panel, I'm going to move mine tonight. Monster tech has swing out post for stick and throttle if you are looking for ideas. Don't beat yourself up, i'm 175 with a 35" waist line, and I have trouble getting in and out with how the chair is set up. Ha, ha, ha, I didn't read anything for setup just looked at the pictures. But to tell the truth, i've re-configured it like 4 times. went with center stick and keyboard on the right (which i will have to move).

[@URL1956]

What are your monitors mounted on? Thank you. Welcome back.

[@alfmags9078]

Hey bud. Love your channel. I just was finishing my Boeing sim pit when I saw your video. I still have to get the motion stand set up I got the commercial one. It’s so well made and it feels like your in a cockpit. My only complaint and it’s slight, Is that I use a honeycomb bravo throttle. It sits far back. It’s a little difficult to move the throttle handles I’m like you size wise but short. So I’ll see how comfortable on a flight Love what you do. Hope to see you in a live stream

[@OverkillSimulations]

Let me know how the motion turns out!! Yes I will be doing one very soon. It's definitely been too long. :)

[@toooooooooooooooool]

Re: getting in and out of the cockpit, what about having a raised platform around and to the back of it, so you step down into the seat versus trying to step around your hardware? Would that be feasible given the footprint and design of the simpit in your space?

[@karlhungus545]

I may get one of these. Could you attach a collective to the left side anywhere? Also, where did you get those magnets for the stick? I don't see a link in the description. Is the seat comfortable over a few hours of sitting? Did a mouse and keyboard pad come with it? I've read that a Buttkicker adapter is also included?

[@load3dedgaming]

Great vid review OKS! This was the first of your vids I've seen during my search of improving my flight/race set up as well as the this particular sim rig. It may not have all functions I want, but I have yet to actually check out the product site to see how modular it is. One thing that really caught my interest was the concern you had or desire to make it easier to transfer in and out of. That's kinda been a concern for me, being a T-10 paraplegic, getting in and out of the seat w/ attached hardware, i.e. dual stick, hotas controller, and perhaps some other components, would make it problamatic to get in and out of the seat. I wonder if there's a rig or piece of hardware to make an arm rest swivel a full 180 degrees to unobstruct and open space for chair entry and exit. IThanks for the vid, very cool to see the first review that mentioned entry/exit complications for those of us who are a little more mobility challenged. Thanks for any time, energy and consideration you throw my way! Aslo, would be nice to be able to put in a wheel for both my flight sim, mainly Star Citizen atm, as well as racing sims like Forza 5. As I'm paralyzed from the waist down, ruddders are of no use. A a platform to but my feet on is much better for me needs. Again, any insight or recommendations to othe rigs would be very cool. It looks like Monstech is pretty innovative and most modular but they're definitely on the higher end spectrum, high end quality and design.

[@OverkillSimulations]

Hey Buddy! Watch my most recent video on this and you can see what I've done. Maybe that will help

[@load3dedgaming]

Right on man! That's exactly the type of functionality I'm looking for to make transfers into my sim rig much more easier. The magnetic plates are genius! I wonder if they can be integrated into other sim rigs... The price is on point for what you get, definitely not entry level, but mid-range and affordable to get started. Is there a monitor/tv mount attached or sold along with it? I'm going to join your Discord, perhaps we can chat and exchange some ideas on mapping out a potential collaborative build for my dedicated flight/race sim.

[@spooledup8295]

May I ask what magnets you bought that are protected on one side to mount your electronic flight stick etc without interference?

[@zakkhuitema3748]

great review. i need this set, but dont really have the room for it right now. one day though. quick question, does the keyboard plate itself pivot? or is it just the base post that does?

[@OverkillSimulations]

Just the base with the way I have it setup. I'm sure you could manipulate that a bit with some of the other hardware

[@neodecker]

The weakest link I've found in the time I've owned mine is the brackets that hold the seat back to the base. I wish they would offer a sold bracket, instead of the adjustable ones.

[@deanregan7011]

I like the look of the seat itself but, no possibility to use a seat mover? It also looks like the angled head rest may get in the way with VR use. I guess you're supposed to enter the cockpit as in real life by climbing a few steps then stepping on the seat and then sitting down, realistic but difficult for some.

[@nuggetz9857]

I use a 8KX no problems. When you are ready to fly and remove it after you log out of DCS. A small table to the side provides a handy spot to keep your headset when not on your head. I fly the F16 mostly so place the seat back at the appropriate angle and I have no problem when doing BFM.

[@TBizzleII]

It doesn't look like the monitor stand comes with this. Can you tell me about it? It looks awesome.

[@stricklandgarageaviation2864]

Only other thing I would add to this cockpit is adjustable arm rests like most Boeing seats have. Nice video. What about sheepskin covers on the seat?

[@perpetualomega]

owwww mine is on order already, waiting months., ok cancelled. will wait for changes. Thanks for the review.

[@kkcsteven]

Can I ask whether the chair came with optional mounts for ww collective?

[@mzmagister]

I know this is not the intended use: but do you feel comfortable to do some office use in this as well? I don't have 2 PC's for gaming and office work.

[@Nightdare]

Actually, the only thing I'm interested in is the seat Wonder if they offer it

[@Specter0420]

They put that cutout in the chair for a center mount, but it doesn't look like there is a way to mount a center stick under the chair. This is essential for extended sticks. I see they have a "way too tall" post there connected to a crossbar that would only position the stick correctly if you adjust your chair just right, but my base needs to mount about 8 inches below the top of the seat cushion for my WarBRD with 200mm gooseneck extension, and I want other people to be able to try it. Do you think it'd be possible to put a metal plate between the seat rails and the seat so I can fabricate a mount attached under the seat?

[@vikingcat794]

There is a center mount attachment.

[@Specter0420]

@@vikingcat794 you mean the one I mentioned in my comment? It is not connected to the chair, so if a shorter\taller person wants to try, you're looking at adjusting them out of position when you move the chair. It is also FAR too tall for an extended stick with realistic range of motion. My stick needs to mount a few inches under the chair for proper placement.

[@paull35]

This rig appeals to me but I am also put off by the limited solution for a centre mounted stick. It really looks like the centre mount only really caters for a stick without an extension. I think with a bit of thought they could probably come up with a solution that would allow for a much lower mounting position. However, it is a very good point your raise about there not really being any positional adjustment. The idea solution would be for the centre mount and side mounts to move directly with the seat and with a level of adjustment. another problem I can see is no obvious way to mount the Virpil collective to this rig without perhaps having a bespoke bracket fabricated. I think this rig is very good and offers a fairly comprehensive option for fixed wing simmers. I would really like to se the design evolve and cater more for helicopters and even for other games like first person shooters so this would offer a good alternative to a desk. It does not seem to be quite there yet, but certainly looking good and offered at a sensible price.

[@LFOD1776]

you need to cut the center mount stick with a hacksaw. Make sure you remove the plastic insert first.

[@Specter0420]

@@LFOD1776 then I'd need to adjust the position of the pedals for different sized pilots, which would be a hassle and might even be impossible. They really dropped the ball on this one IMO.

[@RealWorldAviationandGaming9392]

Would have love too see your newly redesigned intro....well its not about the intro, just that great content you bring to the channel.....

[@DBDagger]

Tell us about the display and housing directly in front center of your desktop?

[@OverkillSimulations]

Search "Shakeprint Class Echo" I also have a video on my channel There's a mobile version now as well :)

[@Davidwilliams-tu2im]

I want to fly a P-51 FIGHTER, IS THAT POSSIBLE WITH THIS SET UP

[@StuartBoyer]

Need info on these magnets

[@perpetualomega]

Can you fit the VPC onto the centre mount (Groin Area)?

[@dotbmp]

this is my same question, i have the extension on my CM3 and I enjoy having it extended and center mounted. So I wonder how well that would work/mount with this setup.

[@rkwjunior2298]

So is there a way to mount the stick between the legs?

[@OverkillSimulations]

Oh definitely! I just chose side mount!

[@ComdrStew]

Once they sell just the chair, I will buy it. I don't need the frame.

[@richard-hawley]

I would destroy it in two weeks. Somehow I manage to find all the weak points, I earned the name "chair killer" at work. That sprocket system connecting the base to the back, if that's not made of decent steel (and it looks oddly familiar to other gaming chairs I've wrecked) has tabs that deform under load. Other fail modes, tubing in the base, pre-deformed by having holes punched in it for springs. Really need to see how they are constructed internally. The frame looks first rate, as always with these things. But that's not the bit you sit on everyday. Just my $0.02

[@thatguy7085]

I like it, but my sim room doesn’t have the space.

[@ViewSlayer]

hows the comfort for longer sessions? I'm 6' 300lbs so trying to find the right solution for me

[@OverkillSimulations]

Get the pro seat not this one

[@ViewSlayer]

@@OverkillSimulations yeah I started looking at that one and I think it’s the direction I’ll be going

[@simpitacademy]

how is this compared to a typical playseat at half the price?

[@OverkillSimulations]

Definitely better in my opinion. Having everything stationary and not having to move chairs etc.. and just feels better if that makes sense

[@AZROTORHEADS]

Can you use it with helicopter controls?

[@zakkhuitema3748]

most helicopter controls such as collectives and what not come with a bracket. the bracket should be able to be mounted, but itll only require some drilling if not. if like in WinWIngs case, the collective is mounted to their normal throttle and this likely is bolted right to the seat with no mods

[@4OfSpades]

can I get an exact maximum seat height (seat not total) Trying to see if I can use it with a desk

[@OverkillSimulations]

From the floor to the top of the cushion?

[@4OfSpades]

@@OverkillSimulations yeah! Like where would ur butt be sitting hahaha. I don’t want to make a separate setup for sim stuff to regular PC games so im hoping it is high enough to use with my desk

[@OverkillSimulations]

@@4OfSpades 18" but keep in mind its not on wheels...

[@4OfSpades]

@@OverkillSimulations yeah I know its a fixed base. Thanks for the help!

[@4OfSpades]

@@OverkillSimulations hey another question for ya. Did it come with a floor mount option for a center stick? I want to have a long stick extension for my center stick

[@toddw6716]

do you find the seat comfortable?

[@OverkillSimulations]

Surprisingly yes!! Especially for someone of my size. I don't use the lumbar pillow and took the belts off but yes

[@toddw6716]

@@OverkillSimulations I have one of those secret labs chairs. Expensive and it’s like sitting on concrete. It sucks!

[@rickmasseur2008]

Great review, but I would NOT call this rig "entry level". I think that the Next Level Flight Sim Lite takes that title.

[@OverkillSimulations]

I guess that's fair.. I'm still new to the SimPit world so I guess what I was trying to get across is it is "entry to the big pits" For example I had priced a bigger and slightly more modular one and was looking at almost $1600 out the door.

[@vikingcat794]

My only complaint is they don't offer this seat separately.

[@TheLukemcdaniel]

Entry level? ENTRY LEVEL? *checks notes* You're telling me that $800.00 USD is /ENTRY/ /LEVEL/? Are you fucking kidding me?

[@nopenotme6369]

Yeah, I thought $800 was a high hurtle for “entry level.”

[@TheLukemcdaniel]

@@nopenotme6369 it may be good for what you pay. It may be far ahead of anything that costs less. But that's not an entry level price.

[@greenranger2764]

I think what he means is that if you look at most flight sim setups with the chair, frame etc. most are more than $800.00 and this is fairly reasonable for what is included.

[@TheLukemcdaniel]

@@greenranger2764 It's still far outside the range of entry level. Great value =/= entry level. VKB isn't entry level. But it's the best bang:buck ratio that's more than a toy.

[@greenranger2764]

@@TheLukemcdaniel out of curiosity what would you consider an entry level price?

[@Gerdam]

Another paid promotion. Its hard to take any of these serious.

[@OverkillSimulations]

Just because it's paid doesn't mean we're all liars.. that's a really crappy thing to say given the hours and time it takes to make these. But cool.