Overlanding Swing out tire carrier build Finished

Overlanding Swing out tire carrier build, for a Dodge Ram. In this video we finish the build.
We’re in affiliate for RockMount Welding Alloys. And we work with tricktools. If you would like to view any of their products their links are below
If you need welding supplies
We are affiliates for
rockmountwelding.com
Hinge used
amzn.to/3mi54Si
Build Pro Notcher
www.trick-tools.com
Basic notcher
amzn.to/3f3AAyM
Paper template
www.blocklayer.com/pipe-notch...
Tube bender
www.woodwardfab.com
14”fine saw
www.trick-tools.com/Fein_Slug...
All of our Affiliates, please use Jeepingmo when you order.
Welding Wires, Grinding & Cutoff Wheels from Rockmount Alloys.
rockmountwelding.com
Email: [e-mail]
Please note: We are an Amazon Affiliate program member, And We are paid by Amazon when you buy any of these products. We do use most of these products.
DJI OSMO Action Camera Bundle with Micro SD Card, Tempered Glass Screen Protectors, Carrying Case, and Must Have Accessories (55 Items)
amzn.to/2NptoPo
CYNOVA Osmo Action Dual 3.5mm Mic Adapter - Made for Osmo Action with Authorization
amzn.to/3fPQ0on
BOYA BY-MM1 Video Microphone KZbin Vlogging Facebook Livestream Recording Shotgun Mic for iPhone HuaWei Smartphone DJI Osmo Mobile 2,for ZHIYUN Smooth 4
amzn.to/2NrJJ6d
IENZA Replacement 3.5mm TRS to 3.5mm TRRS Patch Adapter Cable for iPhone Smartphone Movo BOYA BY MM1 Rode VideoMicro Mics
amzn.to/3ev4JVB
RAVPower FileHub, Travel Router AC750, Wireless SD Card Reader, Connect Portable SSD Hard Drive to iPhone iPad Tablet Smart Phone Laptop for Photo Backup, Data Transfer, Portable NAS, 6700mAh Battery
amzn.to/2YtQYAO
DJI CP.ZM.00000064.01 osmo Mobile 2 Handheld Smartphone Gimbal (Single Unit), Gray
amzn.to/2Ver3ep
• Tube Notch and Weld
Please subscribing and help the channel grow.
Overlanding Swing out tire carrier for a Dodge Ram. Stage 2
• Overlanding Swing out ...

[@spazbyt7027]

That turned out great. Looks very heavy duty. I really like that locking mechanism when it swings all the way open.

[@JeepingMo]

Thank you.

[@4x4fabshop]

Thanks for following the series and the good comments. The latch worked out good.

[@bquade70]

Very cool... Got my Ram and was just thinking about this kind of build! Lake Havasu 🌞 Az

[@4x4fabshop]

It was a fun build

[@freeidaho-videos]

You will eventually tire of opening the latch and lifting the pin, and fill in the hole for the pin at the latched position.

[@sawnasunder9261]

Really honest video with great explanations. Nice work. Thanks.

[@4x4fabshop]

Thanks for the good comments.

[@luisceja8121]

I am planning on building one for my 2006 Tahoe

[@4x4fabshop]

Thanks. It was a fun build, thanks for viewing.

[@officialWWM]

Nice job. One suggestion. Get a small length of pipe, slightly smaller than the inside diameter of your wheels centre hole and weld it to the plate between the wheel studs. That way you can just throw the wheel up on the pipe and it will hold it while you rotate it and line up the studs. It’s a lot easier to get your spare up there!

[@4x4fabshop]

Good suggestion thanks.

[@JeepingMo]

Thanks for the series,

[@jaredinark]

Cool build and nice series!

[@4x4fabshop]

Thanks for the good comments and following along.

[@edwinthomas618]

Beautiful work. Question...do you have to unground the body ground cable from truck before welding...especially if bumper is attached to body

[@4x4fabshop]

Thanks for the question. Yes you need to in ground it.

[@CorsettiCruisers]

Awesome page !

[@4x4fabshop]

Thanks

[@photog1529]

I'm looking to do the same with my '95 Suburban...the inside spare really takes up a lot of room. I was surprised the tubing is 1/8 wall...I was planning on using 3/16 but may reconsider. Maybe its the camera angle, but it looks like the tire is blocking the tail light? Nice looking rig.

[@4x4fabshop]

Thanks for the comments, the tire is moved over so that the edge is just on the tail light, the problem we ran into is the bumper they wanted me to weld it to was barely strong enough. They had to run some stiffeners back to the frame. I think 3/16 would be way too heavy. That’s a 35 inch tire that probably weighs around 100-ish pounds. I’d love to know what videos you’d like to see in the future. Thank you

[@danlangley4798]

Cool build. What did you do about the taillight coverup?

[@4x4fabshop]

The tire was just to the side of the light. Thanks for viewing.

[@guod118]

what about the obstructed passenger side tailight?

[@4x4fabshop]

Thanks for the comment. The tire is just on the edge of the light, we put it where the customer wanted it.

[@josephcastleberry6938]

The axle spindle kit.. (shaft with bearings) where do you find that without a big wheel hub and just a pipe?

[@4x4fabshop]

Here is the swing out spindle kit. amzn.to/3xyeihl

[@edwardeplett3231]

How many shop hrs to build nice 👍

[@4x4fabshop]

Hi, i would estimate 30 hours.

[@pablo01bentos]

What year ram is your and what type bumper is that. I have a 2020 ram 1500 and i want to do something like that too. Awesome work.

[@4x4fabshop]

Im not sure of the year. Thanks for the view and question.

[@pablo01bentos]

You did not answer anything..

[@roberthravanal61]

Hola, muy buen proyecto, me podrías decir que medida tiene el pivote y dónde lo puedo comprar? Estará en Amazon? Estoy atento a tu respuesta.

[@4x4fabshop]

Sorry but i cannot translate.

[@roberthravanal61]

@@4x4fabshop Hello, very good project, could you tell me the size of the pivot and where can I buy it? Will it be on Amazon? I am attentive to your answer.

[@islandcreationlv]

What thickness of rectangular tubing did you use for the base of the swingarm? Also did you use 2x3" or 2x4" rectangular tubing?

[@4x4fabshop]

We used 2x3 & 2x2 1/8 wall. Thanks for the good comment, what other videos would you like to see?

[@islandcreationlv]

Thanks for the reply! Happy Thanksgiving!!! Have you tested it on a trail yet with the swingarm? I'm curious how well it good up...

[@SPHINX144]

What latch is that?

[@4x4fabshop]

Thanks for viewing and your question, it is in the description thank you.

[@SPHINX144]

@@4x4fabshop thank you. 👍