Rears up Front Budget Lift

In this episode of the Toyota Pickup Build we get the new frame plates welded onto the front and add some shock hoops so we can run a little longer shock up front. We also swapped in a set of rear leaf spring up front to move the front axle forward a couple inches Next up we will be tackling the front axle build.
Thanks For Watching!!
↓↓↓ Get your Merch/Off-road Parts Here! ↓↓↓
jbmfg.net/
jbmfg.net/
jbmfg.net/
Follow me on Instagram and Facebook for more content!
Instagram- @justintbraun
Facebook- / overtimegarage
Link to the Toyota Pickup Build parts...↓↓↓
Tires-amzn.to/3I7UbcW
Wheels-amzn.to/3w3f1I8
Shock Mounts-ebay.us/iJXCt8
Transfer Case-ebay.us/KAFv2L
Steering Box-ebay.us/41HMLl
Hydro Assist-ebay.us/MxFwYo
U-bolt Flip Kit-amzn.to/3K7JCZ2
RCV Axle Set-ebay.us/yMQm44
Axle Truss-ebay.us/9L6Btm
Front Diff Armor-ebay.us/9uJARc
Knuckle Rebuild Kit-ebay.us/ZiV0ES
Front Wheel Bearing Kit-ebay.us/9Jv4hx
Front Shackle Kit-ebay.us/jRMltO
Front Shocks-amzn.to/3LRKv8O
Rear Shocks-amzn.to/3LUywHC
Links to 3rd Gen Tacoma parts...↓↓↓
Front Coilovers-ebay.us/47S1kz
Rear Shocks-ebay.us/U1xHsT
Tires-amzn.to/3BG0dPq
Wheels-amzn.to/3auW2Ks
Winch-amzn.to/3D5Hm0E
Light Bar-amzn.to/3iNEWw7
Bed Mat-amzn.to/3FJh5aI
Floor Mats-amzn.to/3AE6D0i
Seat Risers-amzn.to/3DBOyBV
Ram Mount 1-amzn.to/3EF7uB3
Ram Mount 2-amzn.to/3CGBGtV
Tablet Mount-amzn.to/3lMatza
Upper Control Arms-amzn.to/2Xw3PEC
Link to my Amazon store...↓↓↓
www.amazon.com/shop/justinbraun
Links to the 1st Gen Tacoma parts...↓↓↓
Air Compressors-amzn.to/31ZGFoh
Wheels-amzn.to/2uWjWxi
Winch-amzn.to/2sIUGt9
Supercharger-amzn.to/38q0V5b
Tires-amzn.to/36rIPOx
Front Locker-amzn.to/2Ea40IG
Front Coilovers-amzn.to/33EsnbG
Rear Shocks-amzn.to/2YbEHPJ
Front Upper Control Arms-amzn.to/2OHJ1Dn
Lower Control Arm Bushings-amzn.to/2OEu596
Inner Tie Rod-amzn.to/2OYOCUC
Front Floor Mats-amzn.to/2E4Cr3F
Rear Floor Mats-amzn.to/38nNN0B
Window Shades-amzn.to/38sthvJ
Light Bar-amzn.to/2P9KF0G
Air Chucks-amzn.to/2x6ODkj
DISCLAIMER:
Due to factors out of the control of Justin Braun, we cannot guarantee against improper use or unauthorized modifications of this information. Justin Braun assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Justin Braun recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Justin Braun. This video and description contains affiliate links. I may receive a small commission for purchases made through these links.
#toyotapickup #1stgentoyotapickup #toyotapickupbuild

[@robenbraun2345]

THIS WAS FUN TO WORK ON

[@chuckkirkton6973]

Nice job - very thorough

[@JustinTBraun]

Thank you!

[@sandwich8909]

Hey wondering would i need a high steer for the ruf or can i just weld the ruf mounts in place and the tie rods wont hit?

[@cassiemartin3613]

Love it

[@max-o7x]

cool creative 💡

[@JustinTBraun]

🤘

[@nox7198]

love how easy toyota axles are to work on

[@JustinTBraun]

They are not bad. Compared to a BJ dana 60 they suck lol they are easy non the less.

[@monoeyemulisha7203]

FF 14 bolts are even easier.

[@blackdogprospectingwelding7341]

Fantastic work man! Where’d you find the frame stiffener?

[@cammk9415]

Hey Justin! Any chance I could have the part number for the frame plates. Cheers

[@generalrepair9947]

Love the build! About to put rears in the front of my 1983 pickup. What length of shackle straps did you use? Thanks!

[@lift_king]

I did this and used boomerang 🪃 shackles they clear the body mount skys offroad sold them to me

[@ericoudeman9060]

Are those just stock rear leafs I’m about to do Chevy 63 in the rear of my 86 4Runner. Would the stock rears work up front for what I’m trying to do?

[@boisebiker4713]

they should

[@bryanmayes9234]

Thats the exact combo everyone does man, stock rears up front and 63's in the rear...or f150's in the rear but the f150's are an offset leaf (center pin is not in the center)

[@zapz2101]

@@bryanmayes9234 how is the offset dealt with? i wanna install rears in the front but want to keep the axle in the center, but the pin its not!!!! what can i do? can i just offset the ubolt plate with a new offset hole?

[@mitchellwilliams1001]

Did you use the stock front hangar and just add longer shackles?

[@JustinTBraun]

Yes.

[@dundeeecroc]

Where are you located? I will Hire you to do work on my 1985 4runner. had it shipped in from Southern Cali 7 years ago, no rust...

[@JustinTBraun]

I am Lewiston idaho.

[@Audi-rp8oh]

@@JustinTBraun I won’t be finished with my ‘83 Pickup till the end of the summer, but it would be fun to get those of us in the west together (I’m in Utah) and hit some trails!

[@boisebiker4713]

@@JustinTBraun no way im down in boise! im about to start my RUF and 1uz swap on my 91! if your ever in the area you shuld come say hi