Learn How To Do A Car Diagnostic Using An OBD2 Scanner - Turn Engine Light Off

If your check engine is on, you can scan it yourself for pennies on the dollar. With this OBD II scanner from Ancel, you will have a great idea of what is wrong with your vehicle.
Dang Is Your Check Engine Light On Again - How To Fix It - OBD II Scanner Ancel
Ancel OBD II Scanner bit.ly/AD410CAR
Treat Oxman to a bottle water paypal.me/oxmanagain?locale.x...
POWERFUL COMPATIBILITY - Works on most vehicles sold in the USA with model year of 1996 or newer; Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network); Works with English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese; It does not require any Battery or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle. Good gift for Father's Day!
TURN CHECK ENGINE LIGHT OFF - Quickly read and erase stored emission related codes, pending codes and show code definitions. Turns off the MIL (check engine light), help in resetting the monitor before taking it to Smog, plus it tells you what is going on before bringing the car in for repair, saves you the trips to your mechanic.
EXCLUSIVE OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner initiate a leak test vehicle's EVAP system by monitoring the integrity of the fuel tank sysytem; And the O2 Sensor Test is for monitoring and adjust air / fuel mixture, which can identify trouble shooting related to fuel efficiency and vehicle emissions.
QVGA DISPLAY & NEW UI - AD410 code reader is a great upgrade from the more basic diagnostic scan tool. It has a 2.4" TFT true color (262K) LCD display, indicates test result more clearly. With the easy-to-read UI designed, you can easily access among Setup, OBDII Diagnostics, I/M readiness, DTC Lookup and Review, don't even need to read the manual to know what to do, even a beginner can earsily use this unit.
DIAGNOSIC REPORTS & UPDATE - Click "Reivew & Print" option then will save or print diagnosic report as needed; This unit provides life-time FREE software update to fix the latest bugs or add newly parameters. Just download the software from ANCEL webstie, then follow on-scrANCEL AD410 is a great upgrade from the more basic car code reader, read and erase codes when the check engine light comes on. It shows real-time live data reported by the ECU, engine temperature, O2 sensor readings etc. Even a beginner can use this unit to find out what the problem is, saves the trips to mechanic.
KEY FEATURES
Reads and clear check engine light codes, both generic and manufacturer specific codes, resets monitor
Built-in DTC lookup library for manual retrieval and shows code definition
I/M Readiness to test misfire, Fuel system and Comprehensive component
Displays all data stream items or select a certain item of live data with a graph
Views freeze frame data, shows vehicle parameters recorded by ECU when an emission-related fault occurs
O2 sensor test allows retrieval and viewing of O2 sensor monitor test results for the most performed tests from the vehicle's on-board computer
On-board monitor test can be utilized to read the results of on-board diagnostic monitoring
EVAP system test lets you initiate a leak test for the vehicle's EVAP system (not all vehicles support EVAP test, it depends on what's installed installed on the OBDII system by the manufacturer)
Vehicle info will display VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number)
CODE DEFINITION
Built-in LATEST OBD-II DTC lookup library and keep updating timely
Shows the code and what the code means directly with a 2.4" TFT true color (262K) LCD display
After the code was found, it'll show the definition directly by clicking the error code you selectedeen instructions to go.

[@georgemoomaw9437]

I just received my AD 410 today. After flipping through the users manual I came to KZbin to get clearer instruction. I watched 4 different videos. Yours is by far the best. You are thorough and to the point. The only thing you lack (that so many others tubers have)is time wasting, repetitive or irrelevant nonsense. Great Job. THANK YOU.

[@TK-wm8rh]

Excellent explanation of the OBD2 scanner by Ancel. We just bought one and needed to learn to use it. I am a visual learner and you kept it simple and straightforward. For my needs, this scanner works. Keep those videos coming. :-)

[@ooz8539]

I bought one of those I really appreciate it how you explained it and how it works simple straight to the point thanks a lot and have a lovely week looking forward to the other videos as well

[@CandC68]

One huge value in these is checking your car BEFORE going to a mechanic. A trustworthy shop will not make up stuff, and you can ask smarter questions. An untrustworthy shop may tell you things that are not a problem. But you now know the difference. Just don't leave your OBD in the car, to warn them.

[@glennward7827]

This was the best demastrate I then seen on Amazon

[@seanrafferty6672]

Thank you for the helpful video :)

[@goldentrowel1968]

Great job loved how you checked codes by holding enter and scrolling didnt know I could do that

[@mansooraakash6858]

it's so knowledgeable lesson for me dear sir.

[@BBFLLC4400]

This was exactly what I was looking for! Thank you for doing this.👍

[@catherinegreen7003]

🤗👊🤗DaaaaaYuuuuuM🤗👊🤗 I just finished watching an Embroidery Tutorial~ Liked ~Subscribed & went 2 search 4 More Sewing Tutorials & then I see the Plethora of Videos you have 🤗👊🤗 And I have 2 Say DaaaaaaYuuuuM Again✴ Your Wife is Truly Blesssed 2 HAVE such an Amazingly Talented Husband who Appears 2 Be Extremely Multi~Talented Jack of All Trades I need a Machine like this in my LIFE My Jeep has a Check Engine Light that Won't go Off... I Actually bought it less than a year ago. I certainly Hope when it's time 2 Smog my Car this doesn't Interfere with it passing AnyWayZ Great Tutorial Thanx a Million 🤗🤗🤗🤗🤗🤗🤗🤗

[@oxmanagain]

Wow, greatest comment ever. Thanks.

[@jennymagli2567]

Thank you! Very helpful video.

[@Enrique2k52]

Excellent demo

[@r.feddag9737]

Hey bro I love the way you talk and explain. Good man and good lesson thanks a lot Bro from Algeria

[@oxmanagain]

This is why I love KZbin so much. Here it is you live in Algeria and I live in United States and we're able to communicate with each other. You have too really love KZbin. I, appreciate your time, thanks for watching and I really enjoyed your comment. You have a good day.

[@r.feddag9737]

@@oxmanagain Thank you brother. We are all human beings and we must always be good to each other. A nice day brother

[@tomodonnell5738]

Thank you very much very helpful I just got one of these

[@dr.camaled.7085]

Great review

[@matsuz100]

very good review thank you.

[@gdawwg1125]

Great review. this scanner is idenical to the ToolPRO OM126 in australia. subscribed

[@spudgun47]

I just bought one from super cheap. I had engine light on and there fancy scan tool would not scan i20 hyundai so they got out the $100 scan tool pro one and it worked straight away ahahha

[@Adem19811]

Have same one I need to know how to use it when I need to know if car that I bought had any codes before I purchased?? Because after 5 days of purchase code came up. I’m sure he erased them.. any idea??

[@gabmik38]

Awesome man, I have exactually the same scanner

[@illegalwaffel6435]

If you take your car to like Napa or Orilleys, they will hook up their code reader to your car and tell you the codes for free. Now I'm not 100% but I think the reason the mechanic shops charge like 50-100 bucks for the code reading is because their readers are like $4,000 or more and can give alot more information on the code and the issue. Like my car said (Code: 90171) "Fuel System Too Lean" which means either too much air is getting in or not enough fuel is getting in and the air to fuel mixture is not right but there is like around 7 possible reasons that could cause that and with a macanics shops super advanced $4,000 code reader it can pinpoint whats causing that code alot better than just getting the code and having to guess which one of the 7 potentially reasons is the one causing it with the other cheaper readers. So i always just take it to like orileys and have them run the codes for me for free and if its something that could only be caused by 1 or maybe 2 things then im good to go but in a certain situation like I explained above where there is like 7 or more possible reasons, its just better to pay the 50 to 100 bucks and get a way better idea what it is causing the code instead of having to guess through the multiple possible reasons

[@oscarramirez1065]

Thanks for you information now going buy me one soon

[@RussellBettsgogov]

Excellent. Thanks.

[@yomamascupoftea9459]

Another classic video!! Makes me want to become a youtuber👍👍

[@oxmanagain]

Thanks for watching and I bet you would enjoy it. If you ever start let me know and I will support you.

[@yomamascupoftea9459]

oxmanagain Wow brother that would be awesome. I'll definitely let you know..thank you!!

[@ekaterinaryazanova7126]

you can do it, many idiots like this one become youtubers, so why can't you?

[@moneynfast]

New subscriber

[@Happy-Me.]

Good review!!

[@lionelronaldo2228]

Please do a video with m.pokora thanks bro 👌🏽❤️ from🇱🇺

[@robertmadden8543]

I have a 2015 Jeep Grand Cherokee with the V6 Diesel motor. Sometimes a dash light comes on showing traction control. If I press the traction control button, next to it I get the traction control OFF light comes on. What is the reason that the light is on please.

[@pablojimenez5736]

Ok good, but there are many instances the check engine does not goes on and there is a problem associated with lighting on...saying this, what obd2 scanner is able to detect underline potential problems? Let going to say you had that blown block head gasket...will this tool help you?

[@rickmurray442]

Thanks, I bought one.🇦🇺

[@jgonz3411]

Hi thanks for making and sharing your video, can you explain how to reset an check engine light

[@oxmanagain]

Hi and thanks for watching the video. If you continue in on your scanner you will see where it will ask you do you want to reset the code.

[@1abeautifulmin]

Hello good review.man.Just want to ask I have a missfire code p0304 on my hyundai tucson 2008 2L 4cylinder for a while.The engine seems to run ok no stalls no backfires just normal maybe some rough idle in cold engine start.Do you know Wich data from data stream or the graphics option on this ancel scanner will give an idea of what the problem is? P.s. compression test in all 4 cylinder was between 178-180 psi

[@em1j797]

Nice video! It does a lot for such a small and cheap scanner

[@oxmanagain]

I agree with you and thanks for watching.

[@armandralph7580]

If the ignition is just on would the scanner work?

[@jestep9]

Excellent review! I watched a lot them. This one is good!

[@tomeline1]

Excellent video, my good man.

[@uihuiloo4042]

Can use for motorcycle yamaha or Honda Injeksi

[@84jordie]

Hi, will this tool tell me soot level and dpf status on a mazda cx5?

[@RavnerRavner]

I had a CEL come on. I hooked up this scanner... And stupidly erased the codes without reading the codes... The car runs fine.. but how did the scanner make the CEL go off without performing any maintenance?!?! Please help!

[@aneelshaman6809]

Hi, I have not been able to diagnose my front right ABS WHEEL SPEED SENSOR in Jaguar Xf prestige. It can't detect and saw the code. Could u plse confirmed. Thks

[@GameMaker04]

I know its an old video.. but if you see this can you tell me if this unit will let you calibrate the TPS sensor once you replace it ?

[@oxmanagain]

I don't see how you can do that on this unit. I have looked I've just never found it.

[@Defender510]

Awesome videos! Can this device change the language in a Discovery 3 SE? Have mine in Italian,what to change it to English .

[@oxmanagain]

I know that the scanner can change the language on its display. But, I don't know if it can change the language in the vehicle.

[@Defender510]

oxmanagain thanks for the reply.

[@gam85191]

You da man

[@Hiyafranks]

Why does it have ($03) after some of the options??

[@lindalinares9216]

Hey man I’m about to buy the scanner from your link. U welcome🗿

[@oxmanagain]

I really appreciate your support and thanks for watching. I just used it 2 days ago. Is your check engine light on?

[@JR-es1dz]

This device check and clear brake park lights or some one suspension codes?

[@oxmanagain]

no this doesn't clear suspension codes it's just for your OBT check engine light code.

[@michaelhuffman3861]

why do I just have numbers on on board montoring instead off misfires on cylinders?

[@blackvulcan100]

Mine has arrived but more expensive to buy here in the UK ..

[@trevorvlahakis1545]

What’s the model of that scanner?

[@tfaizulfox]

Great info. Unfortunately the item no delivery for my country 😅. Need to find from other supplier

[@oxmanagain]

Thanks for watching and where do you live.

[@tfaizulfox]

Kuala Lumpur, Malaysia

[@Chavezoid]

Hey Fox Pro, get a California door-to-door courier service to ship it to you to Malaysia. Some Amazon products don't ship internationally.

[@janedoe5048]

Thank you. Basic info for noobies like me.

[@lonniehamilton914]

You did a great job will that scanner chick transmission

[@oxmanagain]

Only if a code for it pops up.

[@gaBposheB]

Can check airconditioner???air-conditioned??? Temperature very going very slow and only from passengers side.Can used autoscaner???

[@oxmanagain]

No this doesn't check your air conditioner. It only checks engine cold. To my knowledge. If your AC is not blowing cold you might want to recharge the system

[@oregunwebfoot11]

Bought this to turn my engine light off after installing O2 sensors. was able to erace the codes but the check engine light remains on. How do I turn it off with this?

[@oxmanagain]

After you see the codes if you keep hitting enter it will ask you if you want to clear the codes.

[@franciscohuerta9860]

tankz im sure it will

[@johnkennedy4501]

Does it have an mp3 player

[@auwalhussaini2573]

I buy new obd2 want learn how to use it

[@franciscohuerta9860]

so how good is the scanner ?

[@oxmanagain]

I have three scanners and this is the one I like the best.

[@12antne]

Wish you were my neighbor so you could fix my car!!

[@oxmanagain]

Haha, a few people have said that. What is your problem, maybe I can help?

[@12antne]

oxmanagain my 2010 Chevy Equinox has lost all interior sounds. The turn signal noise, the radio doesn’t even turn on and every other interior sound.

[@haidathassan1553]

How Much

[@babagaming4943]

i want to buy a scanner Does this one work on cars made from 1994 up to now

[@oxmanagain]

No, only 1996 and up.

[@David-ll8bt]

Is there one made for Diesels? How many years back in year model do it go?

[@oxmanagain]

It works on vehicles all the way back to 1996.

[@David-ll8bt]

Thats great. My farm truck is a 7.3 liter diesel. Note Diesel!

[@oxmanagain]

That's a big engine.

[@Houstonpaki1]

Youd did a good job but never explaied that prior or after hooking it to the car doe the engine has to be ?, on and then off or needs to be running? You started a step ahead

[@JG-no4qr]

Exactly the info I was looking for too 🙄

[@jimjones3173]

Just bought this in Australia under another brand.

[@silverkasik]

What is a good obd scanner?

[@oxmanagain]

It all depends on what you need a scanner to do. For the most part, any scanner under $100 will read your code and give an idea of the problem. I like this one because you get live readings and a graph.

[@whocares0316]

how do you find out where you connect this tool in your car?

[@oxmanagain]

It's under your steering wheel above your brake pedal.

[@danielshakesheff2223]

@@oxmanagain not necessarily mine is in the front passenger side

[@bobloblaw5236]

My car slipped into “limp mode”. I was told that I would need to run diagnostic on it. I would usually do this at the part store but they said they won’t do it due to this covid stuff. They told me to buy one of these things, which I did. I think it’s the same one you feature in your video. I had no idea how to even hook it up. I don’t have a USB port on my car. Or I couldn’t find it at least. I don’t know. I’m just fed up. I can work on older cars all day long but these computer things go over my head. Maybe I’m just an idiot. Thanks for the tips.

[@oxmanagain]

No, your not, they make this new car very hard to work on.

[@noryg955]

The hookups are usually under the steering wheel by your leg area. Or just KZbin your vehicle make n model n ask for the diagnostics hookup.

[@toddaddison9676]

Could be your crank shaft postion sensor

[@bobloblaw5236]

Todd Addison don’t know. I never figured it out. Got rid of the car now I’m driving a gas guzzling Dodge Durango.

[@toddaddison9676]

@@bobloblaw5236 all ok buddy have a good one

[@dr.hamzaabdulsater7863]

hallo bro i think you should try this scanner if you want something more professional with a very good range price value check this one called DELPHI or TCS or CDP check this names

[@konradgeel]

Hi Oxmanagain Amazon says the code is not valid?

[@oxmanagain]

Thanks, I contacted the company and they stop the promotion. So I had to take it out of the description.

[@wazzman8760]

Can I clear codes while engine is running, thanks

[@oxmanagain]

Yes, you can.

[@wazzman8760]

@@oxmanagain Thank you. Can’t seem to get my 2011 Cadillac SRX in accessory mode. Cleared code when engine was running. Thanks again.

[@franciscohuerta9860]

im tinking of buying it

[@oxmanagain]

It seems like it will come in handy for years to come.

[@jamesark9926]

Is that going to work in my 1998 grand cherokee laredo..? I have a check gauges light indicator...?

[@oxmanagain]

Yes it will.

[@ThunderFaith]

A check gauges light means just that.... Look at your gauges, something is wrong at one of them. You don't need a scanner to look at your gauges.

[@mr.suttonjr.1104]

Hi there. I had my codes cleared with this scanner but my engine light comes back on after the reset. I live in Burbank and I’m trying to pass emissions. Please help sir. Thank you.

[@oxmanagain]

This scanner can erase the code but if you don't fix the problem the check engine light will come back on. What is the code that keeps popping up?

[@mr.suttonjr.1104]

P0736, P0730 and P0735. I topped off the Transmission fluid and cleared the codes but that pesky engine light cameback on. Can I pass the smog check with the engine light on sir? Please help.

[@MrRoni123456789]

Keith Sutton Jr. same. I cleared it 3 times already. I live in Glendale right next to you and this product is very disappointing

[@miguelzendejas1936]

Does it work if vehicle doesn't start????

[@oxmanagain]

It will work as long as you can turn your car to the on position.

[@miguelzendejas1936]

Thank you it did work....

[@frederickvaatz2383]

How do i turn on the dang thing

[@oxmanagain]

Once you plug it in, the car will provide the power to turn it on.

[@frederickvaatz2383]

@@oxmanagain thanks a ton!!

[@tarsandturkey5233]

What if the Viechle doesn't start..

[@oxmanagain]

You can still use the OBD ii reader, just turn the key to run after you connect the device.

[@johnsmith-sk1ep]

How much do you get paid to hock this scanner?

[@oxmanagain]

I don't make any money from the company.

[@rubenhood3385]

bro how i knows im interest knows..

[@babagaming4943]

hello

[@Chavezoid]

Damn it. I bought one and THEN saw the video. Missed the code!!!! Coño!!!

[@shortafewbolts]

My check engine light comes on every 3-4 months. arghh arghh arghh

[@oxmanagain]

Is it always the same code? I'm actually making a video on cleaning your fuel system with a pour in fuel treatment. Do you think that could be was causing your light to come on?

[@TheSokodelic]

...or you could go to an autozone and get it scanned for free..

[@oxmanagain]

Good point but I live in California and they don't do it for free anymore. But you can rent it so that is a good option.

[@barrygoodson4952]

This video could have been a lot better had you explained where you were going while you were going through the functions ! You kept saying things like let's go here, let's check this etc without saying where you were going. For someone not familiar with using a OBD2 scanner they will get lost with your instructions. I suggest everyone read the manual !

[@venkats3396]

Hm..where to locate the port is imp this guy didn't show