Hi in this video I will show you how to, replace the sensor code p000b bank 1 camshaft position slow response Part No. A4015173501MEA
Пікірлер: 147
@evanjones9195 жыл бұрын
Im having the same issue with this did this fix the issue, and I thought bank 1 was the sensor on the bottom since there is two on that side one by the intake and one by the exhaust, im just trying to find a soloution. im getting ready to try this same thing.
@nestorautorepair5 жыл бұрын
Yes sir this was the fix ,, if you are getting the same code
@jimbo36159 ай бұрын
We are getting this code on a 2016 Legacy 3.6. It runs as smooth as ever but the code will come back after 10-20 miles and is annoying because cruise control won’t work and abs light will come on too. How can you tell if the sensor is bad?
@Alex-nb5hi2 жыл бұрын
will working underneath the car easy to replace?
@alyssahernandez20833 жыл бұрын
You did the camshaft sensor for the intake. The code is saying exhaust camshaft ?
@nestorautorepair3 жыл бұрын
Well the one I did it fix the problem not only for me but for many others.
@theripoffchicago2 ай бұрын
Same code for a 2017 Pacifica.... any idea if it's the same fix? Thanks!
@leonardf-et7wn11 ай бұрын
I was told by the dealer that i should replace the oil control valve solenoid. Should i just replace the sensor in the video and or the ocvs or both?
@nestorautorepair11 ай бұрын
This sensor will do the job
@brandonmiho49822 жыл бұрын
so touching for an excellent video
@nestorautorepair2 жыл бұрын
Thanks boss for your feedback
@jordandiller9233 жыл бұрын
Last 20 seconds are the best lol that's awesome I fuck with all my buddies like that too. I do have the same exact code thrown hopefully me replacing that sensor works. Did anybody ever clean it instead of replacing?
@nestorautorepair3 жыл бұрын
Lol thanks good luck
@firstname6446 Жыл бұрын
2019 sti same code cleaned sensors code came back after couple hundred miles :/ 4 months still haven’t fixed it
@ProGamingProphecy9 ай бұрын
I have a P000A, C1422, C1413. Autozone said, "The recommended part for your codes is a Camshaft Position Sensor". Where is bank 1? Subaru WRX 2016.
@donny00072 жыл бұрын
Got it out with wrench. Ended up getting long 1/4 extension and 10mm swivel to out back in. Couldn't get started with fingers!
@nestorautorepair2 жыл бұрын
Yes sir same way I got it done
@COLDWhips3 жыл бұрын
So I have the 2015 Impreza model without the intercooler on the top, is it located on the same spot? If so, can you access it from the bottom of the car?
@nestorautorepair3 жыл бұрын
Yes it is on the top same spot , can't do it from under no
@GTInick8 ай бұрын
I have this same code on my mk7 gti. Not sure if it’s the sensor or something else. What should I do?
@nestorautorepair7 ай бұрын
Same sensor
@thedestroyer3577 Жыл бұрын
Hey man u know where is the location of bank 2 camshaft position sensor
@meliodas18774 жыл бұрын
hello sir is this code same (p2088 ) Camshaft position (CMP) actuator A, bank 1 - circuit low?? because i have this code and i didn't found this camshaft
@nestorautorepair4 жыл бұрын
What are the common causes of code P2088? Common causes of code P2088 could include the following- Damaged, burnt, shorted, disconnected, or corroded wiring and/or connectors Low system voltages caused by defects in the battery and/or charging system. Note however that these conditions will almost invariably be indicated by dedicated codes Defective Oil Control Valve Misaligned timing marks due to careless assembly after major repairs to the timing system or assembly of an engine. Note that this will usually be indicated by codes other than P2088, such as codes relating to excessively advanced or retarded valve timing Failed or failing PCM. Note that this is a rare event, and the fault must be sought elsewhere before any control module is replaced What are the symptoms of code P2088? Common symptoms of code P2088 could include the following- Stored trouble code, and possibly an illuminated warning light Other codes relating to misfires or exhaust emissions may be present Hard, or even no start conditions may be present in some cases The engine may exhibit some power loss Idling speed may fluctuate Idling may be rough, and/or erratic, or the engine may not idle at all Fuel consumption may increase Catalytic converter damage or failure may occur due to poor combustion Vehicle may not pass an emissions test
@louieacosta42444 жыл бұрын
I have this code but my 2015 sti has been having white smoke do u possible think it’s that
@nestorautorepair4 жыл бұрын
Well I will try to fix that code first and see
@mxn20 Жыл бұрын
How long after replacing did cel go away
@nestorautorepair Жыл бұрын
You need to reset it
@juniormartinez89493 жыл бұрын
Is this just for the sti? Or is it the same for wrx
@nestorautorepair3 жыл бұрын
Same for wrx
@redsapples14 жыл бұрын
What part did you replace? Quit didn’t follow what that is
@nestorautorepair4 жыл бұрын
Camshaft sensor
@luhinch3 жыл бұрын
wrong part no. ? looked it up not finding one for 15+ that fits specifically.
@nestorautorepair3 жыл бұрын
Ok
@RickMa-Men2 жыл бұрын
I’m getting that p000D but some say still replace passenger side sensor. I wanna replace both, I have no idea where driver side sensor is at?
@nestorautorepair2 жыл бұрын
I believe I show both on the video , make sure your oil level is good , if is low you will get the same codes
@carlousgreen40694 жыл бұрын
I’m getting p000d camshaft position slow response bank 1 is this the same thing
@nestorautorepair4 жыл бұрын
Yes I believe so
@carlousgreen40694 жыл бұрын
Is it easier to go under the car?
@nestorautorepair4 жыл бұрын
No
@nestorautorepair4 жыл бұрын
This you can only do it from the top
@dustinbono4 жыл бұрын
P000d is an exhaust cam position slow response. . Cam 2 (LH)
@danesantibanez Жыл бұрын
How do you get the driver side out it keeps getting caught
@fito1143 жыл бұрын
Question so my code is P000D B camshaft position slow response bank 2 is the the driver or the passenger side
@nestorautorepair3 жыл бұрын
Driver is bank 2 Passenger is bank 1
@АлексейБодрый-з3ч3 жыл бұрын
@@nestorautorepair no! Bank2 is on driver side
@nestorautorepair3 жыл бұрын
Thanks correct
@whocares51882 жыл бұрын
Did you fix yours I have the p000d aa well. If you fixed it what did it take?
@RickMa-Men2 жыл бұрын
Where is passenger side on?
@nickpumputis77424 жыл бұрын
I have the code p000A and it sounds like there’s a knocking coming from that side. Could that cam sensor going bad cause the knock? Do you think this would solve my problem for the intake cam?
@nestorautorepair4 жыл бұрын
80% it can be the cam sensor ,, make sure you have a good level of oil
@nathanharrell22774 жыл бұрын
Hello I’m looking at a 2015 and the same code and little bit of the knock on the side could this be the sensor making the engine tick ???
@nestorautorepair4 жыл бұрын
It can be yes
@patrickfortier33573 жыл бұрын
Hello i have also a p000A code on a gti. Did anyone with that code replace the cam position densor and fix the ticking as well?
@tekbuck90793 жыл бұрын
Hey so I have a 2015 sti, this will possibly fix the p000d code?
@nestorautorepair3 жыл бұрын
Yes it did fix it for this one
@tekbuck90793 жыл бұрын
@@nestorautorepair I found one but the part number is 22056aa140, is this the same one?
@nestorautorepair3 жыл бұрын
Yes it is the same
@tekbuck90793 жыл бұрын
@@nestorautorepair awesome thx! Thank u for the quick feedback too helps a lot!
@nestorautorepair3 жыл бұрын
You're welcome
@KalligraphyX4 жыл бұрын
I’ve got a p000d exhaust cam (LH) position slow response would this fix it?
@nestorautorepair4 жыл бұрын
Yes I'm sure it will like I fix this one
@collinchance104 жыл бұрын
i got it couple days ago howd you fix it
@KalligraphyX4 жыл бұрын
collin chance ended up being sensor. Also my downpipe.
@collinchance104 жыл бұрын
KalligraphyX was it the ocvs or the cam sensor an what’s was up with the downpipe
@KalligraphyX4 жыл бұрын
collin chance cam , and cats were roasted.
@cristiantacohin91214 жыл бұрын
i got code P000D camshaft positon slow response bank 2 what are things i can do to fix it ? i have a 2016 subaru wrx sti
@nestorautorepair4 жыл бұрын
Make sure you have a good level of oil
@cristiantacohin91214 жыл бұрын
yeah i did my oil change like 5 days ago but the light came back again lol, what side is bank 2 and if its P000D is it exhaust or intake and where would it be located
@nestorautorepair4 жыл бұрын
Driver side bank 2
@SecretPlaceVideos4 жыл бұрын
I got codes p000a engine position system bank 1 and p000c slow response bank 1 what should I do
@nestorautorepair4 жыл бұрын
Passenger bank 1
@gersonbueno3775 жыл бұрын
Hello, did this fix the problem?
@nestorautorepair5 жыл бұрын
Yes sir 💯%
@gersonbueno15025 жыл бұрын
Thank you for your quick response. Very informative channel.
@nestorautorepair5 жыл бұрын
THANKS, any Time
@alexionitse70123 жыл бұрын
I got a p000c will this fix the problem?
@nestorautorepair3 жыл бұрын
I believe your fix will be on the driver side bank 2
@alexionitse70123 жыл бұрын
@@nestorautorepair what about p00016 or p0300
@alexionitse70123 жыл бұрын
@@nestorautorepair also do you know the part numbers for the bank 1 and 2
@nestorautorepair3 жыл бұрын
That's a crankshaft solenoid
@KikiLilK0083 жыл бұрын
Hey I have a 07 dodge caliber with p000b b bank 1 is this the same
@nestorautorepair3 жыл бұрын
Hi im not sure the location but yes it will be the same fix
@whocares51882 жыл бұрын
@@nestorautorepair when you say same fix do you mean same part just on the drivers side? Bc p000d is divers side.
@dankmob42054 жыл бұрын
How the hell did you fit your hand down there lol 😂
@nestorautorepair4 жыл бұрын
Lol that's what I'm saying
@whocares51882 жыл бұрын
Anyone with a p000D code on their STI do what he did in the video and it will fix it. I been fighting this code for 8 months. The code is for the drives side cam. So it has to be the drivers side cam position sensor right? Nope. Well then it has to be the drives side oil control valve? Nope. It's the passenger side cam position sensor and it's a pita RIP your finger.
@nestorautorepair2 жыл бұрын
Ok
@Kemstylebossy Жыл бұрын
I changed everything you said and still giving the code changed sensor problem solved lol cost me money to find out lol.
@Alex-tb9fbАй бұрын
In the same boat as you right now
@websters55692 жыл бұрын
i have the p000b bank 1 and idk where the sensor is. :(
@nestorautorepair2 жыл бұрын
Just follow my video
@Raven4203 жыл бұрын
i’m still trying to find the thing. imma just drive til it blows up for the 5th time. worst car i’ve ever owned.
@nestorautorepair3 жыл бұрын
Wow
@localurban35552 жыл бұрын
I’m having the same code on my brz
@nestorautorepair2 жыл бұрын
Now you know the fix then
@localurban35552 жыл бұрын
@@nestorautorepair I was told on the brz it might be the oil actuator
@nestorautorepair2 жыл бұрын
First make sure the oil level is good
@localurban35552 жыл бұрын
@@nestorautorepair I just got an oil change But I had that p000b before my oil change It pops up and I delete the code and comes back on a few weeks later . But I will check my oil level tomorrow
@nestorautorepair2 жыл бұрын
Ok
@whocares51883 жыл бұрын
What about p000D
@nestorautorepair3 жыл бұрын
Same
@josevas49283 жыл бұрын
p000b here chief...? where is bank 2
@nestorautorepair3 жыл бұрын
Driver
@whocares51882 жыл бұрын
Trying to get this back in the hole is a pita I'm about to just burn the car
@michaelorellana86695 жыл бұрын
How much was the sensor? And where did you buy it?
@nestorautorepair5 жыл бұрын
I don't remember the price,, but it was from AutoZone
@nestorautorepair5 жыл бұрын
Wait the sensor was $64 from advance Auto parts
@michaelorellana86695 жыл бұрын
Thanks
@michaelorellana86695 жыл бұрын
Did you change the oil after the install??
@nestorautorepair5 жыл бұрын
You're welcome
@RandomPerson19 Жыл бұрын
I was told this code was specific to jeep..
@fatkat311 Жыл бұрын
I have a 2015 WRX FA20 and have received P000A and P000B Codes for the past 10,000 miles. Over that time I have replaced all the oil control solenoids at least three times… every single one. I have replaced the timing chains, the AVCS gears. The codes will clear and stay away for a couple weeks but continue to come back. The cams look clean, no debris in the oil … oil is always full and clean. Anyone else having similar issues? I’m not sure what else to replace or change. I have nearly disassembled this entire engine
@jimbo36159 ай бұрын
Is this code still coming up? I’m getting one on a 2016 Legacy 3.6. Didn’t have the problem until we took to a garage for something completely different and I suspect they did something to the car to get us in there for more repairs. Not sure what to do…
@fatkat3119 ай бұрын
@@jimbo3615 yes unfortunately… no codes for 500-1000 miles after replacing another solenoid, but then I would get a P000A,B,C,D code… no idea what was causing this. It was acting like the solenoids were going bad. I would replace the solenoid that matched the code and everything was fine for a few weeks or so. I never found out what it was. I sold the car a year after this issue started. Good luck… this was a pain