P0497 EVAP PURGE SOLENOID REPAIR AND VERIFICATION : 2005 HONDA ACCORD V6 J SERIES

[@ua7pyro591]

Easy and quick repair!

[@SkillCollectors]

:D

[@Tableshaft]

Good video bro, how urgent is the replacement of the part? In other words will it cause problems if I drive the car for a few days?

[@Donjuliolll]

So I had the same code come on. I replaced the part, erased the code. But eventually it came back on. I also replaced the gas cap. Any suggestions ? Thanks

[@SkillCollectors]

Same car, Accord v6? Are you able to run the function test with a scan tool and are you able to perform a smoke testing. May have to go that route to continue narrowing down the problem. Usually I suggest doing those tests first before replacing the parts.

[@Guachale]

Did you find what the problem was?

[@Donjuliolll]

@@Guachale yea replaced the purge solenoid with a oem Honda one, problem solved. I also replaced the gas cap with factory one. I’d check local junkyard for the solenoid and replace it. Make sure it’s a factory oem one.

[@teylorherrera2534]

@@Donjuliolllhow do I know is oem ?

[@Donjuliolll]

@@teylorherrera2534 OEM should have the Denso stamped on the solenoid.

[@zenithauto5296]

Good info!

[@SkillCollectors]

Glad you think so!

[@brandonlopes7642]

Whay about for a 4cyl???