P3 Cars - Audi B8 Install Guide - Digital Interface - A4 S4 A5 S5

P3cars.com brings you the video install guide for our vent integrated digital interface. The vent integrated digital interface is designed to be a plug and play install that is completely reversible in minutes.
More info on this gauge here - www.p3cars.com/...
This guide covers the following vehicles:
B8 Audi A4
B8 Audi A5
B8 Audi S4
B8 Audi S5

[@pacohestilo9313]

Does it show the oil temperature in A5? I can see in the PDF that it is conected to the OBD conector. Can I conect and desconect it several times without problems? Because I use the OBD conector frecuently for Vagcom and REVO SPS changes.

[@P3Gauges]

dogmatic88. You can email us directly via a link from our site. It is similar only we just have you loosen the trim then remove the vent housing from the trim surround. You can then install the gauge in your existing vent or order it preinstalled in an OEM vent housing.

[@P3Gauges]

389 available on our site and in stock

[@P3Gauges]

@Homero V. car guys should always be watch guys:-) Good eye!

[@durellusmc1]

curious, if i need to hook up my VAGCOM cable to pull a code, do I have to remove the P3s connector from the OBD port?

[@osmanlitorunlarigeliyor2091]

Very Nice FROM TURKEY 🇹🇷🕋😎😎😎😎❤️

[@dracolnyte]

NICE TAG!

[@donikbajrami1555]

Hi, can you tell me for what is this?

[@P3Gauges]

It’s a multi gauge to give you information from your ecu

[@jaredpror]

I just got mine today but it doesn’t have a ob2 Connection?

[@P3Gauges]

Sounds like you ordered our entry level “Boost gauge”. Email us - [e-mail] and we can get you upgraded to the OBD2 “Multi-Gauge” that is shown in this video

[@Darthnightt]

is it possible to get this unit for the other side?? im from Australia and thhe steering wheel is on the right

[@P3Gauges]

Yes we offer this gauge in RHD and LHD

[@propeople]

how much ?

[@Nana-hq9dv]

U do them for right hand vehicles ?

[@P3Gauges]

Yes, we do! Please check out our website - www.p3gauges.com

[@Nana-hq9dv]

@@P3Gauges says for RHD b8.5 vent option N/A ? (Audi s5)

[@P3Gauges]

@@Nana-hq9dv We can't get the RHD vents here in the states but you can still purchase the gauge and install it into your own vent.

[@Nana-hq9dv]

@@P3Gauges so it will fit on the left hand side only then ?

[@P3Gauges]

@@Nana-hq9dv Our product is just the display and gauge. We make that for LHD and RHD applications. The RHD vents themselves are what we do not offer. Process your order without selecting the vent option and it will go through. Then you'll just install it in the vent in your car right now. If you have any other questions, please email us - [e-mail] and we will get you taken care of, thanks! - Jake

[@P3Gauges]

Good eye dracolnyte ;-)

[@mill3rTechShow]

What does this do I want a boost gauge

[@P3Gauges]

boost either direct from the port or via our analog sensor. (we only recommend the sensor if your car was NA stock (v8S5 or the V6) or if you have installed a larger than stock turbo. It also offers you information like EGT, intake temp, 0-60 timer, battery voltage, code read and clear and much more. CHEERS!

[@kviinng]

Hi @@P3Gauges , Do we need to separate buy the analog sensor? Mine is S4 Avant with revo pulley, revo stage 1+, K&N open intake, AWE exhaust. Daily drive.

[@P3Gauges]

@@kviinng It typically depends on your tune. With a stage 1+ tune you should be ok without an analog sensor. If you modify your car further you always add the analog sensor later.

[@P3Gauges]

mason, I assume you are being sarcastic. All the vehicle info plus 3 analog inputs ... you can monitor your own heart beat if you really wanted to :-)