The Most Convenient Motorcycle Trailer! What Do You Think? 🚴✨

[@RustyCray]

It's designed so you can drive it on there put your feet on the fenders. Push the raising bar down with your feet. And don't forget to put the lock in it will pop out if you hit a good speed bump. We have had the same system for our snowmobiles for 30 years.

[@tantarove8]

😊

[@Greboguru]

What ridiculous bike is that?? Looks like a life size judge dred toy

[@jaker3151]

No it's not designed to be use that way. You expect someone to ride and balance their bike up that narrow channel, dock the front wheel and then put their feet on the fenders? Did you see how far apart the trailer fenders are? Then whilst basically doing the splits you think someone can use a foot to push down the raising bar, without any leverage, to lift the weight of the person and the bike? Please use some common sense/logic before posting nonsense 🙄 The guy is using the trailer exactly how it is suppose to be used.

[@craigb8228]

No straps?

[@RustyCray]

@@craigb8228 and that all you have to do is lock that front fork & tire. tire in it in place. On the snowmobile we run a rod through handhold on the skis. Reese hitch trikes. One through the wheel. Two straps back to itself to hold the front end from turning. It becomes its own trailer.

[@portcitygrady]

Wow that Bike looks like cyber punk bike 😮

[@peterrobinson270]

Its a Honda ST1100 (USA) or Pan Euro (Europe ). Its modified and missing original fairing. 90 degree V4.

[@scottyo64]

And your point is? 😅

[@i.r.wayright1457]

​@scottyo64 The point is he took one of the best bikes Honda ever made and by modifying the front end, ruined the handling. I owned one for over 20 years, and have 59 years of 2 wheel experience.

[@PatrickDenehy-f4k]

Sounds like a 750.

[@PatrickDenehy-f4k]

​@@i.r.wayright1457it looks Beasty, you have to admit. How bad is the effect on the handling?

[@i.r.wayright1457]

@@PatrickDenehy-f4k All I know is the stock set up was perfect for me. Sticking the front wheel farther out ahead will slow down steering reaction.

[@JohnnyDE85]

The design of bike and trailer Awesome ❤

[@briankuhn7396]

Brilliant! I watched this about 10 times to make a mental schematic. Now, I just need to learn how to weld aluminum. 😂

[@AwesomeBlackDude]

Pls post tutorial when you finally accomplished this achievement under the good lord of Jesus. 😅

[@jtguitar1154]

Toca los 3 puntitos de arriba a la derecha y te pondra opciones y escoje guardar en una playlist y la pones en (ver mas tarde) o la que gustes y cuando la quieras ver pones youtube y presionas una opcion que esta a mero abajo a la derecha y presionala y te pondra lo que hayas grabado,y asi podras guardar y ver videos de you tube.saludos!🫡

[@arthurdunn1452]

Steel would be easier and much stronger Australia 🇦🇺

[@nipponsuxs]

Just do it in steel, it's not like it's an overweight trailer

[@youngheart2868]

😂😂😂

[@LarryTait1]

Patent the design immediately!!! Brilliant

[@ZEUS-eg8jw]

Make the half-loop electric, and you got my vote ... 😉!!

[@ufffmorteuxpubg1538]

😊😊😊😊kfz😊

[@markklein5637]

Would increase the price way too much and add to the complexity.

[@Maxz_Singh]

U can buy electrical winch n add it urself ig? But good idea 😉

[@ДимаЗ-о5ш]

зачем ему все это паркетное железо чтобы подпрыгнуло на малейшей неровеости или препятствии... мог бы просто одеть лакированые туфли и обтягивающие брюки 😅😅😅

[@chrissalter8342]

Am I missing something? What's actually holding the bike in place?

[@jz9201]

Look at the Front tire 😉

[@rossevans1774]

Gotto be the best heavy bike trailer I've seen.

[@Wolod-h3p]

Платформа трохи піднялася,але не сказав би що ,,байк''добре зафіксований,чи може чогось не розумію?!😮

[@stevieboy7873]

Awsome bike trailer and well engineered

[@armorer94]

You can keep the motorcycle, I want the deux chevaux in the background.

[@richardwalker7688]

Put a 2CV engine and a BMW boxer engine side by side and Voila. I put one in my Charleston. YeeeeHaa it goes like a 2CV should and sounds the same :-)

[@maning005]

Editor did a great job blurring the plates.. 😂😂😂

[@Johan-mw5gb]

Yeah. I had no trouble reading them either. They’re belgian plates, both the car and the bike. The plate on the bike indicates it’s registered as an oldtimer (starts with O-Mxx-xxx Oldtimer Motorcycle)

[@karenoaks7778]

It's about time something like this hit the market! ❤

[@dougupah8778]

Its homemade, watch the whole vid, he built it, looks like a factory built trailer though.

[@grahamball364]

Is a great trailer whoever designed that. Great idea.

[@klptldn]

very unsafe the 1m before the wheel locks in. Look at his feet , easy to stumble. Just my thoughts

[@callumscott2650]

He's using the trailer wrong, that's why 😅

[@Jamessmith-j4p]

That straight axel with no springs should make a great ride for the bike.😅

[@tomrepurpose2770]

Saw that 2😮

[@PoliticallyIncorrect-n8q]

Exactly my thoughts. Wo deranged if you could make it where you have a wide U shaped setup hinged at the front, with the axle doing the same thing ut the u shaped arms to go on either side suspend the rest with coils. Basically making a standard coil spring trailing arm suspension but the arms instead of being an A shape or two individual arms underneath, make them a giant U shape to go on each side to keep it low, and then you can retain the axle tilt mechanism. Might add about 80 pounds.

[@geemy9675]

well the bike has its own suspensions so it's gonna be ok but the trailer itself is going to take a beating on potholes and speed bumps

[@mopedmarathon]

Very nice sir. That mechanical latching sound when you pull the bar down sounds like it’s built to last!

[@brianlanders8028]

The first bump he hits, the motorcycle will go bye bye. It's a cheaply made trailer and no way to tie or securing it.

[@philippe6295]

Et les sangles d'attache , ou sont elles . 😮😮😮😮

[@タケゾウ-g4q]

こんな簡単に載せるのは良いけど発車したらバイク後ろに落ちないのかな固定された気配が無かったから大丈夫？

[@isthatminhtos]

@@brianlanders8028 see those loops on the bar that sways down? you hook your latches to those. so i mean, this video doesn't show us how he ties it down. just how he loads the bike on it.

[@kaushikvishwas9060]

This is completely new for me.

[@Дим-м6о]

Ничего себе какой мотоцикл,ну и прицеп конечно удобный 👍👍👍

[@user-KrackerJack]

That's nice . I like it but I'd like to see how he locked the bike down after loading it because just running the front tire in that front piece isn't going to hold it upright looks like they skipped that part of how he locked it down or maybe I missed something

[@thomass8362]

If you watch when he lowers the bar, the bike raises up so there is something grabbing underneath the bike which is supporting it.

[@ryanjensen2624]

​@@thomass8362 The front wheel is sitting on a saddle also

[@Enter-a-name55]

​@thomass8362 The bike rises up because the whole trailer platform does. It's nothing more than a lever system to make it easier to load and unload the bike. It still needs to be strapped down in the usual fashion. If you watch when he rolls the bike on the trailer it's license plate is touching the ground. After he lowers the big horseshoe lever the trailer lifts up. The plate is now several inches off the ground.

[@JohnJohnson-ML574]

When I run my bike up into the front wheel, chock it holds the bike from tipping over. Then I can get off and put a couple tie downs on it to keep it from being bounced out of the chock.

[@Frieghtliner1975]

You still have to secure the bike.

[@Bmg009]

The license plate bracket would kill you if you wasn’t paying attention.

[@Mrgotdammit35]

*Wtf is the point of the bar?????😂literally prevented dude from riding it on there and made him look stupid*

[@絕殺的鎖鏈]

看不到子母車上有用什麼東西有去固定那台重機，彷彿只是把重機架上去而已 那一台重機難道自配陀螺儀？

[@SirMike02]

The front wheel is held in place by those bars, this alone will allow the bike to stand on its own, but only barely. HOWEVER, you still need to strap the bike down to the trailer (usually 2 in front and 2 in back) to protect against movement during transit.

[@mlm5368]

😊😅

[@ТульскийПряник-л9н]

Крутая машина, ну в смысле мотоцикл! Но правда очень тяжëлый, чтобы он был нормальным в управлении, такие мотоциклы надо делать из титана и аллюминия! Тогда будет шик, он станет в два раза легче и станет в два раза более управляемым, исчезнет валкость, очень большая инертность, соотвественно скорость реакции и манëвренность возрастут!

[@slavina.6021]

И чë тут классного?

[@andrecostermans7109]

Front wheel is locked in. There are several 'eyes/rings' welded on that 'down pulling bar' for the use of straps . Perhaps also several attachment points on the bike, not really visible in this vid. The principle/idea for the uplifting chassis is 'the wheeled log arch aka long John' , a device used by loggers to get heavy tree trunks out of the wood.

[@aterack833]

I like how the tie down points are designed so it becomes a motorcycle slingshot if the latch comes free

[@jaylsomething8653]

Whats holding it in place besides thing on front tire?

[@Duckyou555]

That is a major accident that has already happened but they say history will repeat itself.

[@kornadi0531]

Alat trelernya lumayan ,Karena menaikan motor itu kalo kurang hati hati bisa roboh ke kanan kerena terhalang tuas dongkrak.

[@JetFire9]

I like it. Needs massive padding on those loops because someone is going to drop their bike on those bars eventually. They should keep the bike from completely falling over.

[@johnbouwens2024]

That's perfect for a Harley owner cuz you're always broken

[@patrickirby9825]

Lol!

[@gabrielpothe704]

Yes all who cannot afford a Harley used to say this😂

[@johnbouwens2024]

@@gabrielpothe704 I've had several harleys.. 57 pan 68 sportster 69 sportster and my 74 shovel ...

[@arvidsolli7698]

​@@johnbouwens2024 Well, that DOES explain a lot. 60s Sportsters are not marvels of reliability. Although most of their problems usually boils down to the mechanic....

[@hodedo7803]

So your newest Harley is 50 years old. I have a shovel. It's not great. I also have an evo and a streetbob and they are excellent quality. I also have a new Rocket for whenI want to go real fast. We'll see how that holds up

[@Coyote1473]

That's gotta be the fastest looking bike I've ever imagined 😂

[@canjian1783]

Wait, you need to buy a truck and a trailer to pull your bike to where you want to............... ride your bike??? What am I missing here?

[@michaelschroder1776]

Forget the trailer. What a monster bike. Love it

[@davidweaver4702]

Love it. We used to have one that worked in the same way. It was Ro Ro Motorcycle trailer, made in the UK by MSW as I remember. It used round tube rather than your square section tube. But I enjoyed the video. 😊

[@3482-h8c]

How have I lived my whole life without one of these?

[@ganxyli6584]

Надо наоборот, при подъёме рамки что бы прицеп приподнимался. А на рамке тент сделать от осадков

[@anitablades6033]

Nice, now we just need the new drivers from ??? off the roads, to make them a little safer. Like they used to be. Not really safe !

[@bradleyj.fortner2203]

That trailer probably costs as much as the bike does.

[@2B34ever]

Look at his video content. He built the trailer himself

[@bradleyj.fortner2203]

@@2B34ever No. I'm not going to click on every short I watch. That defeats the purpose of shorts. If it's DIY he should have lead with that.

[@rosepine4746]

@@bradleyj.fortner2203 ​​⁠it’s got a link on the shorts screen that literally says diy motorcycle trailer. You don’t even have to click it to see it u clown. just open your eyes.

[@derrickbarker343]

Bros pulling this with a v60 wagon. "There goes my hero"

[@droc6600]

Wow that’s a really great and easy trailer

[@geoffreyreeks2422]

This is known in building as the German method of brick laying. We builders want this method of brick laying, but we cannot find brick layers who will use this method because we also want them to place mortar on the vertical face and brick layers don't want to "fiddle" with the mortar.

[@vplph]

I use a good simple motorbike trailer. but this is really BETTER. No stress to manoeuvre a 350 kg bike from the edge onto a 30 cm wide bridge with your design.

[@stvbrsn]

So the sole purpose of the large gate is to provide leverage for you to jack it up from a ramp to a trailer?

[@мрак-и1п]

Я думал на мотоцикле ездить нужно ,а не возить его 😊

[@allabergen5487]

Завел , пару метров ,и в стойло лет через 50 - и больше , будет стоить как самолёт.

[@aruniyengar5430]

When It is critical, building redundancy in case car stalls 😊

[@Valerybata]

Если его просто возить на прицепе, тогда он меньше ломается 😂

[@РенадБердеев]

Думал? А ты умеешь😂?

[@awesometopics1988]

Is anybody not talking about that motorcycle look how unique that thing is

[@HighEndTabletC64]

That Trailer ist realy cool

[@justinsteffen796]

If it's in neutral, like it was when loaded, unless there is something I am missing you may want to at least strap it down! Depending on cost it seems great, if pricey ramps don't scare me, and it to easy to find and modify an unwanted jet ski/ waverunner into a ramp load version of that. Looks nice , we'll built and convenient though.

[@jcore01]

That's a sick looking bike 💯

[@Sartre_Existentialist]

Two questions.... 1. Is there a two bike version? 2. Is it available for sale?

[@LuisMex-uo4zn]

Muy bien!! Práctico y seguro!!!

[@Imthedude77]

Damn the trailer!!!! (Which is really cool btw) look at that frikin bike man!!!!! Holy speeding tickets Batman!!!!

[@stephenkihara9666]

Nice bike for real❤ I love it❤🎉

[@kleekboop]

It took three times to figure out what that overhead bar was for.

[@Ник-х9щ]

У НАС БЫ ЧИНОВНИКИ ПРИДУМАЛИ ТЫСЯЧИ БУМАГ ДЛЯ РЕГИСТРАЦИИ ! 😅

[@ROG0Z]

Что? К чему этот комментарий?

[@dwainmorris7854]

What the hell do you use that rail for just to indicate how high a bite you can load onto that trailer?

[@oscarjaviertarazonacadena1747]

Excelente vehículo para transportar motocicletas 🏍️🏍️🏍️

[@НиколайЛошкарев-ж9ы]

А мотоцикли вже самі не їздять-їх 😮 тільки перевозять?

[@Dudeitzmimi]

Dang, Honda has made some weird motorcycles that you never hear of

[@halwilliams1682]

That is one of those "I wish I would have thought of that".

[@Джамшед-э1ы]

Здравствуйте, брат, у вас хороший мотоцикл, где можно купить цена сколько стоит?

[@UBAEDULLAEVMARUF]

Ето еврейи

[@joseangelrodriguezsanabria6269]

Ya fabrique el trailer ahora solo falta esa máquina poderosa Honda

[@Yu-Ijinn]

What’s the point of censoring the car’s plate when you don’t censor the mirrored plate on the trailer 💀💀💀

[@monicasanson8111]

Hermoso el Citroën Rojo !! Una joya 💎

[@neonone9164]

Awesome. But the arch kinda is like...... Huh? It really has no other purpose than to be a lever, and it actually gets in the way loading the bike. Might be best to do away with the arch and just have a big lever on the right side then you would not have anything in ur way when loading the bike. Awesome build the idea is novel and kicks bunns. Love it

[@masterandrestemuco]

Y que tal esos 2 de atrás...rojo y beige 😍

[@garciatier6268]

Que chulada de máquinas no me avía fijado 😅😅😅😅 hasta que vi tu comentario

[@mikepettit4822]

that thing is awesome how much weight will it hold ,will it handle a full size Harley bagger?

[@adolphojunior5279]

Gostei desse reboque. Top demais 👏

[@TheDIDSBIAK]

That looks like a risky handling thing. Luckily it didn't fall over

[@natalaraujo4665]

Show parabéns gostei 👏👏😊

[@chickywilly]

Nice setup. I would design it with another “short” swivel bracket to secure the rear tire.

[@The1stKukuDrifter]

The only thing worse than stolen repackaged videos is not having the decency to tell us who makes the trailer.

[@jasonhellyeah]

Nice bike! But, I'll stick to my 5×10 trailer with chock. Because, it also hauls my sled in the winter, and stuff when I need to go to the landfill.

[@mscatservices12]

Nice! This should be sold everywhere ❤

[@raymondmorehouse9906]

You only need half of the arch to raise the bike right or left hand version coming to a bike shop near you

[@Narinjas]

You could add 2 spools of nylon string to pull down by the 2 top sides and make it semi auto, have an electric motor, but also a central winch wheel insertion, so you can manually drive the gears when you have no power, also adding the elastic strap lines on the little hook spots you have, would ensure stability while driving, and make the electric or mechanical advantage winch a necessity, but that is for longer drives, you could have snail spring in the middle so you can have the nylon string always slightly tensioned...

[@hizzyvoltaire3764]

How is the bike staying upright? Video jumps from front wheel hitting stops, to raising the bar. Where's the faffing around putting it on the stand or putting the stabilisers in place?

[@pflaffik]

They arent going anywhere, the bike and car and trailer will all stay stationary, no need to secure it

[@ketutwijaya4133]

The metode its the same as motorcycle parking racks, you can google or search on YT "motorcycle parking rack" theres so many videos explained how its works.

[@artificer845]

Are you complaining?

[@kaycertified]

How much of the video were you able to see with your eye balls?

[@EddieEDWARDS-e3l]

This is almost what was required of you if you wanted MC license back in the days

[@dimasbenitez9240]

This is cool and all but that trailer only has one use.

[@Gremlin14112]

Use an L-Arm on the Rear to Lock the bike in place, bypassing need for straps, and we'll buy some of the Trailers...

[@genemaddox6872]

Im more interested in the bike. Can we see a build video?

[@perfectsolobj]

What's the essence of having a power bike if it will be towed from one location to another?

[@Admiral_tintin]

Looks nice. Unfortunately there is still twisting of the body and a overstep to park the bike. Good trailer though and nice lock setup.

[@sammcrae8892]

Forget the trailer, but I love the BIKE!

[@gidelimgorelim4172]

Car registration is blurred and yet its visible on the trailer 😂

[@homer5802]

No broken back windows, no dropping the bike, no backflips. I like it. I like the bike too.

[@fin_jan]

But why have the arch and have to pass the handle bars through it? You could still use a lever to raise the trailer without creating an obstacle course.

[@tonylichacz6453]

I made one like from wood to fit the box on my half ton truck. Worked real good. 😊

[@K9guard1]

Couldn’t get a good look at it, and I didn’t look it up online. But it might have a torsion bar suspension like my boat trailer, worked awesome.

[@MKalha-26]

The only wrong thing he did on this trailer is not adding a folding light and license plate for an easier loading and unloading.

[@keeganmartin1886]

Forget the trailer. I need to know everything you did to that Honda!

[@Mcddung-zo9ux]

Why blank out the car number plate, but only partially for the trailer (which should have the same as the car) and not at all for the bike?

[@jeromewink557]

That’s a dumb setup. So the giant lever lifts the trailer and while you are loading it’s just in your way for no reason? What am I missing?

[@stevet8833]

When I want to move my motorcycle from one place to the other, I use the throttle.

[@matchoo4050]

I’m thinking of getting a motorcycle and truck just so I can get one of these trailers. 😂

[@jorelvaaz2087]

Forget the trailer! What kind of bike is that? 😮

[@jamestilley9786]

I think that tail light should be able to swing into the frame so you don’t trip on it.

[@ksisu1324]

How does the bike stay upright on it's own? Using tie down straps while it's being towed I hope?

[@anitabrooks1768]

This is a cool design and idea but I wish the people in the back would shut up so we can watch the video

[@SWDArmy]

Why you just blured car plate? Not the trailer 😂

[@Honda500Cb50]

Forgot the part to add the straps … not just load the bike on it . If u look there is hooks for the straps .

[@Mike-m3j]

Finally a great designed trailer awesome

[@trayfasho3069]

Tht bike has a whole honda civic motor in it 😂