Paint Peeling Or Flaking On Old Coving And Walls

Paint Peeling Or Flaking On Old Coving And Walls

[@creechrfeechr8094]

Magic that mate, thanks for your help! Was panicking we needed a plasterer for our kitchen, but after seeing your video, I think we can deal!

[@PaintingandDecorating]

Thank you hope it all goes well for you.

[@MK-651]

The paint in my 1927 house is so stubborn. Instead of peeling the paint someone just painted over it. Now its 3-4 layers thick of different colors and paint types.

[@danielbarnard8069]

How easy is that paint coming off?! Wish whoever painted that had done my house. I think they added glue.

[@katherinew2189]

Helpful thanks. Have a living room wall like this to deal with. The wall also has rising damp so have to wait for that to be treated before I can start. Might be a good idea to use a dehumidifier before I start preparing the wall too.

[@angelinasoto6939]

Finally, a video where the walls are exactly what I am dealing with!

[@PaintingandDecorating]

Thanks hope you sort it.

[@justhearmeout4490]

I swear ! His videos are the only ones matching my house 😮‍💨

[@itzflowie5616]

@@justhearmeout4490 maybe he comes into your house at 3 am to do that and just fix it again

[@siypic]

@@justhearmeout4490 Me too.... for the last couple of years it seems...lol

[@Hippie-i8g]

Ditto! 35 years of paint & plaster fell off.

[@nickyscott383]

You definately did 'watch and learn'...spot on every time....👍

[@PaintingandDecorating]

Thank you.

[@justtisha]

just started fixing some cracks and this happened. I knew I should come to your page to see what you do.

[@PaintingandDecorating]

thanks and hope you sort them out.

[@will7285]

Can't figure out what's savable and what needs scraped off cause most of it comes off very easily so doing a grouling full strip job of entire room sucks

[@nickyjadee2519]

How do u get the pain off if the pains peeling or coming off but there's tougher parts where the scraper will not work

[@ubahfarah4272]

Did you eventually find out how? I have the same situation now

[@greatestever6372]

@@ubahfarah4272 leave the rest alone if it doesn’t want to come off and seal the whole wall with PVA, before the PVA adhesive dries paint your wall.

[@wiffer22222]

Do you put pva on before or after any polyfilla? Thanks

[@AdvaitGyan]

Very nice video. Thanks for ur help. I needed this knowledge.

[@PaintingandDecorating]

Cheers your welcome

[@mrhr9335]

Tackling this job in my kitchen tomorrow. Do I need to let the PVA get before adding the primer? Thanks for all the videos, you're my go to KZbin guru for painting and decorating! 🙂

[@PsBandofMen]

Don't use pva if you don't know what your doing. Use zinsser peel stop. It's designed for this and easy to use. Just paint it on, then when dry apply your top coats

[@rajnirvan3336]

Scrapping off distemper can be a nightmare but in the end worth it. I hate it when some paint directly on bare or new plastic with full emulsion. When I see new plaster or wall bare I just thin down 1st coat

[@PaintingandDecorating]

Yes a mist coat works fine as long as it's done correctly.

[@lmb7384]

So informative and ASMR relaxing! Keep this up, you will have a big following!

[@PaintingandDecorating]

Thank you.

[@bootsmclaughlin1438]

Great video. But way to much chating lol

[@cjdfv]

Yeah. Shut up.

[@zpr-si9pd]

Lol I was forwarding it like “how’s boots McLaughlin think there’s too much talking haha

[@bootsmclaughlin1438]

@@zpr-si9pd put me off all that talkin

[@cherylward5315]

☺☺☺

[@sigma_z]

Totally, I mean, this could have easily been a longer video, maybe even 12x 90 minute long video episode series released once each month! Just stop talking will ya and get on with it! 🖐️🎤

[@helenabbott7698]

Thank you, confirmed what I was thinking!

[@PaintingandDecorating]

Your welcome

[@SuperSuneel]

Come to India and peel half wall it's so sturdy and labour intensive

[@justhearmeout4490]

So the like brown /yellow chips behind the paint can stay on the wall ? Do you do video calls ? I’ll pay . I gotta few questions i need to show and tell

[@darrenosullivan6247]

I heat that once u start 2 peel I b hoping it b small..but some times it b the hole wall.

[@curiouslyt2123]

What is that clear liquid you brushed on?

[@theenglishtrucker1849]

What do you do when the pain just will not come off? Im trying to sort a ceiling thats a millon years old with at least 100k layers of paint. How the hell do I get it off so it can be re painted?

[@greatestever6372]

Scrape what will come off leave the rest sand than clean clean the dust off the cavity than apply your PVA adhesive you want to apply your paint before the PVA dries up

[@ihavenoname6724]

You need to apply wall putty or whatever you call it (a filler), in place of the scrapped paint or it will look like .... you know what.

[@emilyramirez2132]

I’m having this exact issue. I just scraped away all the loose wall and I’m ready to follow you next steps. I’m making sure that I have this correct... Clean scraped area with PVA Prime all surfaces Sand Paint with vinyl matte paint? I’m a little confused after the initial priming step. There is no need to repair plaster?

[@PaintingandDecorating]

PVA is not a cleaning fluid, its a sealer when diluted to soak into the plaster. Thanks

[@stevearchibald5627]

Is the purpose of using the primer/undercoat to negate the need to skim fill (for want of a better term) the areas where the paint flaked off, to achieve a seamless finish?

[@richardjones3112]

How do minimise the step between the new and old paintwork?Great vid .

[@PaintingandDecorating]

Thank you.. sand down the edge then fill twice and paint... if it still shows then mix a hard stop filler..

[@richardjones3112]

@@PaintingandDecorating Thanks.

[@catherinewienburg4874]

Thank you 🙏🏽

[@PaintingandDecorating]

Your welcome

[@skyhawaii5446]

Not a cheap fix to say the least. Was the bottom coat oil or lead based paint?

[@PaintingandDecorating]

No old emulsion paints... and they use to put lead in oil based paints.. to make them more flexible... they stopped putting lead in oil based paint years ago...

[@jankiupadhyay806]

You work with so much perfection!,

[@PaintingandDecorating]

Thank you.

[@456Brian]

Fantastic job I've learnt a lot from you 👍

[@PaintingandDecorating]

Thank you

[@dulceavila2760]

This video was so satisfying to watch lol!!

[@suemount6042]

Totally agree with you would have love to be the one peeling that off the wall lol

[@LouisMoir-Barnetson]

Great video! Thanks for posting. How would you recommend dealing with old flaking primer that I intend to paper over with lining paper? The wall is too large to scrape it all off.

[@PaintingandDecorating]

Thank you... scrape off loose seal whole wall using diluted PVA milky water... then fill around all edges once dry sand then seal again using diluted PVA.. ready for lining paper... if anything shows through lining paper... then you can fine fill after first coat of emulsion using a hard stop filler... paint and filler mixed together..

[@womble7345]

Was the old chalky paint, distemper. If so could a stabilising solution be used?

[@PaintingandDecorating]

Yes.

[@patcunningham6672]

Hi, could primer sealer be used to first coat ?

[@noseyfuker]

im going to have to binge watch all these vids as im now stuck in house for 14 days,,,,, i told wife with covid 19 you better to rest than to do actives as exercise if any form can progressively make things work..... no choirs for me 😘😘😘

[@PaintingandDecorating]

Enjoy the videos and your downtime and pray for light casualties.

[@moeenahmed6853]

Hi pal. Why is the paint comming off the wall anyway???

[@PaintingandDecorating]

The old paint has not been sealed before the new went on paint.

[@moeenahmed6853]

@@PaintingandDecorating hi. Do you mean the wall did not have new plaster paint on it. So that's why it's comming off.

[@lookmanseedat]

If i'm painting a wall black do i need to primer it? My walls currently got bits of paint off as i removed the wallpaper

[@PaintingandDecorating]

Lot of preparation after removing wallpaper.. you need to remove paste by washing wall warm soapy water. Remove any loose paint.. seal wall using diluted PVA milky water.. fill any holes or edges of paint then sand and seal filler.. ready for first coat... you can do more filling after the first coat. Thanks

[@lookmanseedat]

@@PaintingandDecorating what about walls that are painting white they are abit rough i want to paint my room black

[@mandyg.3004]

Hi. Have you tried Zinsser peel stop ? Also did you chose this particular primer because its a water base and fairly mild compared to others on market. The reviews on it are terrible so i imagine its ideal for this particular task as its very thin?

[@hansiesma16]

PVA is a glue, not a primer, and its pretty thick. It was thin in this instance because the decorators watered it down to easier absorb into the bare plaster - they were using it like a stabiliser except its a glue not a stabiliser. These decorators like to use PVA but better practice would be to use a dedicated stabiliser followed by your two top coats. Some paints react to pva and then you have to start all over again. A google search confirms this.

[@mandyg.3004]

@@hansiesma16 who mentioned PVA? I,m asking about the primer " valspar "

[@hansiesma16]

@@mandyg.3004 Ok my mistake. 🤐

[@franziskaklaiber5768]

So this is from moisture but does not mean therecis fungus?

[@PaintingandDecorating]

Fungus is everywhere it just needs the right conditions to grow. thanks

[@cdgarrett1]

Your paint is peeling easy all over the wall. Mine only peels easy in spots but I need to remove it all. It looks like your walls are cement. Mine are old sheet rock with fifty year old wall paper under the paint. It must be oil base paint peeling off the old wall paper. Wish I could get the rest of it to come off. I may have to just remove the sheet rock.

[@mihaelageorgetaniculaie24]

PVA I think it’s not as satisfactory as BIN sealant is, isn’t it? Especially on those peculiar zones above&near by the skirting where ridges are located. Just an opinion.

[@PaintingandDecorating]

All depends on what your sealing..

[@nadhiratulhudasarman2489]

Is it normal for paint to easily come off just by a little scrape?

[@PaintingandDecorating]

no and it's possible its not bonded with the plaster or painted surface. plaster needs sealing and paint work needs washing and sanding before painting. thanks

[@alexanderchaker]

That drum roll at the end gave me a heart attack

[@terrilee734]

Lol me too

[@appleztooranges]

This job freaking sucks. Doing my whole garage now. Ceiling just flakes right off when I painted. Using a 14” steel blade to remove it all. Sucks

[@carcasscruncher9354]

How old is that roller? Its past its prime for sure. Jesus mate.

[@PaintingandDecorating]

Made from aluminium and plastic last for ever nearly.

[@namb5I]

Hi there Once I used the pva after while I seen my wall was like a bit sticky pick up the dirty quick

[@kay_lovesantiago7992]

😭my living room peeled off real bad and my dog didn’t help with that one Ha got a lot of work cut out for me take all the pain off How do I make it easy to come off

[@PaintingandDecorating]

Always best to see if you can peel the surface off, sometimes the front will absorb water. So always best to test an area first. But patience and warm soapy water is best. Keep wetting and allow to soak it falls off eventually. We only ever use a steam stripper if it's not possible to wet and soak.. thanks

[@catross3713]

Fantastic

[@xThe13thWarrior]

I've got a similar problem only that it isn't coming off in big chunks, just little bits at a time, is there a way to make it come off easier & faster or is it just a grind til the end? Cheers.

[@PaintingandDecorating]

not really warm water may help... sharp blade get underneath the edge better. but if it does not want to come off leave it... fill around the edge sand and it should be fine. thanks

[@projectzorgo1085]

What you mean fill edges

[@TinekeWilliams]

Looks like the paint never properly bonded!

[@SteS]

Is there such a thing as the pva been put on too thick and the paint not sticking either. And how to solve that? The paint in one of our rooms is not as bad as this but when you rub areas with a damp rag the paint comes with. What would your advice be here?

[@randymarsh3636]

5.1 water/pva x2 coats let the first coat dry. If the surface is weak it's best to remove it, which sucks 💪🏻💪🏻💪🏻

[@alexroden1461]

Lol wish the paint in my kitchen was that easy to remove

[@ratchriat1716]

if the job got to be done has to be done properly on the first time enjoyed the video.

[@swissanthony]

Hi....Why PVA instead of a mist coat of contract Matt ?

[@PaintingandDecorating]

It's cheaper to use and helps the paint stick better.. PVA ia a glue and diluted to a milky watery consistency it soakes right into the plaster. Thanks

[@rickyjohnson8904]

Lovely stuff.

[@karlwhite9181]

Paint flaking off walls. Let me do a video for you and talk you through absolutely nothing thanks for watching. Lol

[@MrKent1111]

@@karlwhite9181 well without being told scrape, pva, prime and paint.

[@mack1609]

Nice

[@PaintingandDecorating]

Thank you.

[@maxwellmc9734]

Just realized I have this problem on my stairs 😣 😂

[@PaintingandDecorating]

Well at least you can fix it following some of are steps.

[@andrewmcgeorge7820]

Seamless mate.

[@kashfortheking]

ASMR 😎

[@TapelessDrywallFinishing]

👍👍👍👍👍

[@PaintingandDecorating]

Thank you.

[@scorpionnetherrealm8937]

Why does it start to peel in the first place?

[@PaintingandDecorating]

It's because of the old chalky paint that was not sealed.

[@scorpionnetherrealm8937]

@@PaintingandDecorating ahh funny as i do this anyway but now i know the root of the issue.many thanks

[@PaintingandDecorating]

@@scorpionnetherrealm8937 Your welcome.

[@WilliamJoseph2015]

This is so dangerous, please wear gloves. You'll thank me when that sharp paint flake avoids getting stuck under your finger nail.

[@spinx1200]

👍🏻👍🏻👍🏻👍🏻

[@PaintingandDecorating]

Thank you.

[@randymarsh3636]

Plasterers nightmare right there

[@wonderwoman9170]

satisfying

[@markcrotty5910]

👍🏼

[@PaintingandDecorating]

Thanks.

[@freedomvoice7857]

OMG he talks so much 😂

[@SlothyWoffy]

Shocking

[@RockyTuxedoFBI]

Yeah right. Who is going to find that scenario ever... Falling off so easy. Old paint is so stuck to the wall especially when it is old and built up that you simply can't do that and it falls off magically. Give me a break.

[@Carenotzzz]

Mine is doing exactly that lol just peeling off in sheets

[@RockyTuxedoFBI]

@@Carenotzzz Oh, well, I may be wrong then. Take care

[@NiktheEnglishGreekCypriot]

What a bizarre comment, it happens a lot, you think he staged that happening to make a video about? Very weird thing to say

[@RockyTuxedoFBI]

@@NiktheEnglishGreekCypriot Whatever dude. I spoke to many people and no, I don't believe that. But, it was wonderful for you to take the time to write out a well-thought comment a whole year later after I wrote mine. You go, dude!!!!!!

[@NiktheEnglishGreekCypriot]

@@RockyTuxedoFBI you do understand that there’s no time constraint on comments on here, just because you saw the video a year ago and me a year later, doesn’t mean your comment isn’t open to a reply or criticism. Again, you must have zero experience with decorating, if you’ve never had sheets of paint peel off a wall because it wasn’t mist coated, was dusty before painting etc