I got the same kit myself! one thing I did differently was NOT shaking the paint and mixer together like that, it creates little air bubbles that can transfer over. Slowly stirring it for 5 mins while chugging a cold one is the way to go! (you’ll need it 😅)
@willdabeast1442 жыл бұрын
Is it one kit for all 4 calipers??
@qlaseakcashuel20884 жыл бұрын
Everybody showing these how to videos has a garage, i need to get me a house 1st with a garage then i will come back an paint my calipers. Good vid thanks. Music was dope too souned like a cool Super NES game.
@a-veteranlandscapesitework24137 жыл бұрын
The first youtube channel that actually shows me how to do something and not talk crap all daylong about the cars they lease.
@briantetley97 жыл бұрын
You forgot to mention that painting your calipers red adds +5hp per caliper and applying the G2 sticker a window creates an additional 7.5 hp.
@Lethalgarage7 жыл бұрын
Shit... I knew I forgot something.
@BonSid496495 жыл бұрын
Wow I've never seen calipers, rotors and such so clean even before cleaning. Very nice. You obviously love your car.
@Jason_Laster4 жыл бұрын
Looks great! Painting is one of the most humbling things ive ever tried to do but after watching this, i'm gonna give it a try too👍
@mr.exclusive234 жыл бұрын
I like but how do I keep the brembo logo
@RoadhogRNA7 жыл бұрын
Great video. My I gave some advice from an old car guy. Make you a safety block from like 4 2x6's. nail them together and stick them under car near the jack stands. Those are fine jack stands but if one fails or falls over that wood block keeps the Camaro off of your legs. (I learned this the hard way under a 70 SS chevelle). The brake calipers look great.
@rand49er5 жыл бұрын
Good video. I did my '16 ATS calipers (same ones as on your Camaro) just last week using the G2 kit. Though pricey at about $58, the results look very good ... easy prep with the brake cleaner provided, minimal masking off the area required because little risk of getting paint on unwanted surfaces like with spray cans others use, easy application (though the little brush was toast by the end), a beautiful glossy color without spraying a clear lacquer coat, and no drips or runs anywhere. No surprises ... I hate surprises. My decals will be in my mail maybe later today. Thanks, again!
@anthonycaldi70563 жыл бұрын
Dude...that is a sweet ride. Love it in white!
@BlueHawk01728 жыл бұрын
I've watched this through 2 or 3 times without audio while watching Netflix.. Finally watched with audio today as my kit will get here sometime today. I also went with the G2 kit, that's how I found your video. I think I'll take your advice though and start on it tomorrow morning instead of when it gets here today.. Thanks for the video man, great job.
@Lethalgarage8 жыл бұрын
+Zachary Isbell thanks for watching. Let me know of you have any questions.
@Myoldaccount-mu7of4 жыл бұрын
Does Dawn dishwashing liquid do a good job?
@somanyroads748 жыл бұрын
Great job on this. Been going back and forth trying to decide if I want to do this myself. Contacted a shop and it was going to be $1,100 to paint them. That's a little strong. Gonna go with the G2 kit and take a shot at it. Thanks for all the videos. You do a very good job with them and there all informative. I have a 14 5th gen and I've done a lot of mods that you talk about in your videos. CAI, headers, tune, BMR lowering springs, MRR replica Z/28 wheels and a few other cosmetic touches. Again very well done man. You have yourself an excellent Camaro and it's nice to see the pride you take in it. 👍
@Lethalgarage8 жыл бұрын
+Jammin Jerry thanks for the support and recognizing the passion ;)
@CrimsonBullet999 Жыл бұрын
So is there no need for clear coat after? Plus what if your calipers are rusty asf, I'm assuming you'd need to sand them right? Then what about primer?
@Sincere77154 жыл бұрын
How did you get that back to stay up?
@Lethalgarage4 жыл бұрын
Huh?
@michaelsommer33695 жыл бұрын
How long will the paint last once its mixed. I was thinking about doing the front calipers one day and the rears the next.
@Lethalgarage5 жыл бұрын
Hours. Have to do it in one go
@highjeff1003 жыл бұрын
Perfect jobs..I like you clean all parts in wheels housing 👍🏽. I will go buy brushes, cleaning and paint tomorrow 😀
@raypowell52682 жыл бұрын
How is the paint holding up on the calibers?
@brewalls23017 жыл бұрын
Looks so good! I am hoping to paint my own soon.
@Lethalgarage7 жыл бұрын
You can do it.
@leonardtanner63942 жыл бұрын
Can you explain why you find this application better than high temp spray paint?
@Ss319947 жыл бұрын
how has it been holding up, any rust ?
@cod4Anubis6 жыл бұрын
1 set is enough for paint all calipers?
@Lethalgarage6 жыл бұрын
Yes. You can paint all 4 with 4 coats no issues
@Sincere77154 жыл бұрын
Like the beginning of the video u jacked the front right and than you went to the back tire and did what?
@RedondoBeach25 жыл бұрын
Three years have passed since this video was made. I'm interested in seeing a follow up video that shows how the paint has held up or aged over that time.
@Lethalgarage5 жыл бұрын
Held up for 2 1/2 years. I have since had my brakes powder coated.
@Lethalgarage4 жыл бұрын
It never failed or didn’t hold up. I just had them stripped and coated regardless.
@jrr1964 Жыл бұрын
Bought the g2 kit for my wifes new 2023 expedition. Actually got the kit ordered before I payed for it and drove it home. Watched the video and it was great. Heading in the garage early tomorrow to get started. At least I know what to expect now. Thanks for a great video. Just wonder how the g2 holds up after time? Thanks
@Lethalgarage Жыл бұрын
Was great for the 4 years I had it
@jrr1964 Жыл бұрын
@Lethalgarage I went and got some paint brushes when I opened it they had upgraded them and gave 3 better quality. It took people complaining to make it happen. Thanks great video.
@Ozzie4Para4 жыл бұрын
Love the video man. My car came with the upgraded six piston slotted rotors on the front for which the calipers are already painted. The rears on the other hand look like crap. So now I will paint the rear calipers to match the fronts.
@ej92365 жыл бұрын
Beautiful job.. looks time consuming. You think paint would harden in can if I don’t add activator so I can do 2 at a time . I was going to use half paint and half activator and do over few days due to time constraints..
@user-bk5ey9ws5g2 жыл бұрын
I was thinking of getting this same kit. Hows it holding up?
@AllanJ11757 жыл бұрын
Cool!!!!!!! I will hope someone has a Synergy Green for my Green Bee n thanks for this neat how to!
@roballard734 жыл бұрын
Gonna give it a shot on my 15 2 ss . Did it hold up ?
@Shazam7455 жыл бұрын
Where were all jack stands located ? Painting my 18 2ss on Monday 😃
@PornhubCA4 жыл бұрын
austin how it come out?
@Shazam7454 жыл бұрын
Kdog 27 over all good it was my first time so there is like 2-3 mess up spots where u can see paint run down but if I could ever do it again it would come out way better and plus yellow was a pretty hard color to work with getting it to cover took some coats cause yellow is a light color but they look great , I wanted them yellow now because in the future I’m gonna replace my front 4 pistons in to 6
@michaelguido89854 жыл бұрын
Will the paint chip if you change brakes when using a hammer to get it off?
@Lethalgarage4 жыл бұрын
You shouldn’t be using a hammer on the calipers
@DeltaTristar5006 ай бұрын
So I already have my calipers painted and I want to change the color on them. I do like those G2 system however what is the best way to deal with calipers that are already painted. Unfortunately some of the paints falling off of it and chipping away from the old paint. Can I paint over that?
@Lethalgarage6 ай бұрын
Technically you can paint over it, But it would probably have to be a multi situation for sure to build up where it may have chipped or fallen off. since you’re seeing the paint chip, you might wanna look at high heat clearcoat after you’re done painting them
@DeltaTristar5006 ай бұрын
@@Lethalgarage so when away build up the areas that are peeling off and then go from there? I'm going from red paint to either yellow or gold
@Lethalgarage6 ай бұрын
@@DeltaTristar500 yeah, that’s what I’d do .
@bentambling69967 жыл бұрын
Matt, I painted the bleeder knot/valve too, would that be a problem in the long run? Thanks again
@Lethalgarage7 жыл бұрын
+Astiginbro if you have to change brake fluid it could cause the paint to flake
@clashofclansboombeach10977 жыл бұрын
Does this avoid my warranty ???
@marcuslimbaugh45926 жыл бұрын
Love the vids. Can i use a spacer on my wheels like you did for a 2015 1LE? Think u used 5mm? Is that safe for 5th gens?
@Lethalgarage6 жыл бұрын
You can. I am currently running 3mm.
@eddiebilik87355 жыл бұрын
Have you heard of vvivid high temperature vinyl wrap on calipers? Another option to keep in mind....
@secretm.58964 жыл бұрын
Isn't better to apply primer before? Also, is it more of a dark red than fire red let's say? Looking to do mines too..
@Lethalgarage4 жыл бұрын
Primer isn’t really needed.
@chcx916 жыл бұрын
For those of you who are skeptical as to whether or not the kit comes with enough paint or not...Trust me when I say, there is MORE than enough paint to apply almost five to six coats on the largest of calipers. I got the yellow kit and when I first mixed in the reactor and started painting, I was like “This shit is really thin and is bleeding through...I wonder if I did something wrong? Is there enough...?” Between each coat it got thicker and thicker. I put like four coats on with almost half a can left over. My calipers are bright ass glossy yellow now. :P
@Lethalgarage8 жыл бұрын
I had no idea if you put time stamps in the description it would auto link to those points int he video. Super cool.
@jmano18 жыл бұрын
Lethal You can use a vice grip, or a strong clamp to squeeze the metal tighter where it clamps the bristles of the brush, and less will fall off during paint process. It's not a 100% guarantee, but with a stronger connection now, and a lighter use with the brush I did have success, and no bristle hairs came off during painting.
@etsarse26 жыл бұрын
Thanks for the video - painted my calipers last weekend - absolutely love it!
@derekkash72245 жыл бұрын
is the car just on 2 stands? front passenger and rear driver pinch-weld jack slots?
@Lethalgarage5 жыл бұрын
4 stands
@jarednguyen26787 жыл бұрын
should I use high heat 2000 degrees spray paint after using break cleaner? And should I use the red paint after spraying the high heat spray thing?
@Lethalgarage7 жыл бұрын
+Triet Nguyen no need for high heat anything. Just use the G2 kit
@bigdutchocblends44775 жыл бұрын
very nice vid .. straight forward .. to the point.. informative.. and I'm appreciative of your effort.. great job and yeah the calipers look good.. I'm with bonbee.. those calipers/car body were immaculate.. lol
@reginaldrountree68914 жыл бұрын
I do the calipers and rotors I take electrical tape and tape around the road was real close to the edge all the way around and then take the whole roll up up and then I airbrush with Rust-Oleum the color I want what's 67 heat temperature in the paint bleed like spray bottle
@harleminthebuildn92343 жыл бұрын
TOP MARKS MATE 👍🏾👍🏾👍🏾👍🏾👍🏾
@james.antonio5 жыл бұрын
Hows the paint holding up?
@Linxtec8 жыл бұрын
Thanks a million was waiting for you to do it!!! kick ass job Matt.
@nathanstoll24532 жыл бұрын
How has the paint held up after this long?
@Lethalgarage2 жыл бұрын
Good question, was in great condition but had them powder coated
@jaredmonez4 жыл бұрын
How’s it holding up? Was a clear coat recommend and does wheel cleaner dull then paint over time? Thanks
@Lethalgarage4 жыл бұрын
Never used clear, you need to use a none-acid based cleaner. But still looks new
@jaredmonez4 жыл бұрын
Great to know, thank you. Had it on the shelf a few weeks, plan to attack the painting next weekend. Thanks 🙏
@fryer2097 жыл бұрын
I'm about to paint mine but was thinking shouldn't I spray some high temp clear over the decal to prevent the white decal from discoloring?
@Lethalgarage7 жыл бұрын
Mine have been fine without any sort of coating.
@bigj53376 жыл бұрын
Matt did you wait 24hrs before driving your car? That's what it says on the box?
@Lethalgarage6 жыл бұрын
I waited overnight
@michaelerickson28564 жыл бұрын
Did you put a new "Camaro " decal on it?
@Lethalgarage4 жыл бұрын
No
@vlexlopez53894 жыл бұрын
What’s the wait time between each coat
@sergioamaya52286 жыл бұрын
How do you get the car on towers I have difficulty lifting my car with a jack. The jack is to big.
@Lethalgarage6 жыл бұрын
Smaller jack?
@bigIenny6 жыл бұрын
Use the jack in your trunk to lift it enough to fit your big floor jack
@hodayadan94066 жыл бұрын
can i use a common paste painter? Even if its not Resistant to heat?
@KappaCow5 жыл бұрын
did you use the brushes provided with the kit? damn that looks clean, almost no orange peel. Other videos ive seen looks like shit
@Lethalgarage5 жыл бұрын
If you take your time it will look great, I purchased better brushes for like $3.
@robe68495 жыл бұрын
Which color do you select ?
@brambhai48774 жыл бұрын
Nice job! How many paint kits did you need? 1 kit for all 4 calipers?
@lukakapyro8 жыл бұрын
Do your brembos have a crossover pipe thats connects them at the bottom?
@Lethalgarage8 жыл бұрын
+B GerK I honestly do not knoe, I need to check the rear back side.
@Ottonic67 жыл бұрын
I'll be replacing my calipers pads & rotors so I am going to spray paint them the same color as my car before I put them on. Figured might as well paint them now while they're off the car... The red looks good, and to be honest they looked pretty awesome before you painted them. You could have probably picked up some kind of decal that matched the original Camaro logo that was on them. That would have been nice also.
@youngkreisler5 жыл бұрын
Nice video. How's the paint holding up in these few years?
@Staki69088 жыл бұрын
This was oddly satisfying to watch lol good job man
@Lethalgarage8 жыл бұрын
+Todd Ison Ha! Trying something new here. Ended up being my longest video to date, but I felt showing the process was needed to show how easy it was regardless of the time suck it is.
@JuanPerez-yy5hr7 жыл бұрын
Great video Any clear coat on top
@lawn2learn4 жыл бұрын
Obviously tape your areas before you mix the paint. Look how late it is in the end. Regardless I don’t think you can screw this kit up. Lays pretty flat from what I’ve seen. As long as you spend the time to clean and prep. Painting is easy maybe cut the wheel to gain access. Great tip on the brush. Theirs is crap. 👍🏼
@asaffarfar15294 жыл бұрын
How does it holdup in the long run ??
@Lethalgarage4 жыл бұрын
Has done well.
@asaffarfar15294 жыл бұрын
LethalGarage thank you
@Vultite5 жыл бұрын
How well has this paint held up? I thought about doing this to my ride as well...
@Lethalgarage5 жыл бұрын
It's been great
@BAKEMAN878 жыл бұрын
Will this kit work well during cold temperatures? Debating to tackle this or not during winter break in the garage (not heated tho).
@Lethalgarage8 жыл бұрын
+BAKEMAN87 they ask for it to be warmer or the resin will not set.
@BAKEMAN878 жыл бұрын
Lethal ok, thanks bro!
@harris83907 жыл бұрын
Not sure how I feel about a paintbrush method for this. Wouldn't the finish dry in brush-marks and really bad orange peel?
@harris83907 жыл бұрын
Plus, what about a clear coat to add extra gloss and protection?
@Lethalgarage7 жыл бұрын
+Harris Montevallo not needed. Been on the car for one year with no chips or issues with decals
@Lethalgarage7 жыл бұрын
+Harris Montevallo nope, as it is an epoxy it becomes a smooth coat.
@calhobbes8628 жыл бұрын
They came out really good.
@Lethalgarage8 жыл бұрын
+Daniel Gamboa Urosa Thanks
@bingster-2238 жыл бұрын
gonna look great inside the black rims, to bad chevy doesn't offer color choices especially when upgraded to the brembo brakes
@Ghettochild.26006 жыл бұрын
I'm at a bit of a loss here. I love the red calipers and have been thinking about doing the same to mine. However, I'm sick of cleaning brake dust and heard that the MGP caliper covers were good for eliminating this (Powerstop also). From what I've researched it sounds like they can help draw heat out of the brakes? "Caliper covers also have additional benefits beyond appearance and ease of installation: They reduce the amount of brake dust that gets on your wheels, so your car will stay looking cleaner between washings. And contrary to some opinions, the increased surface area they add near the brakes actually serves to reduce overall temperatures. MGP ran tests with an infrared thermometer gun and found that their aluminum caliper covers acted as a heat sink, drawing heat out of the brakes and reducing caliper temperatures by 30° to 50°F." What's your two cents on caliper covers? Thanks Matt!
@Lethalgarage6 жыл бұрын
They do not reduce heat and they do not stop dusting. I am honestly shocked so many people buy these. If you have real brembo's paint them or powder coat them the color you want and they will look great.
@Ghettochild.26006 жыл бұрын
LethalGarage On that note I'll definitely be painting mine instead then. Thanks Matt!
@pixilatedshots75694 жыл бұрын
My calipers came red do you think blue would cover it up?
@Lethalgarage4 жыл бұрын
With enough coats, sure
@pixilatedshots75694 жыл бұрын
Do you think this look good on a valve cover?
@Lethalgarage4 жыл бұрын
PixiLated Shots depends how well you can paint. I’d suggest taking that to powder coat
@pixilatedshots75694 жыл бұрын
Thank you sir
@sc100364 жыл бұрын
When I tried I got some unevenness unlike how insanely smooth and nice yours looked!!! Did you wait for each coat to dry before painting the next? What do you recommend?
@Lethalgarage4 жыл бұрын
Sahas Chintakayala they dried as long as it took me to get to that corner again
@davidgarza64108 жыл бұрын
you think the dupli color caliper spray or the brush will work too lethal?
@davidgarza64108 жыл бұрын
i forgot to ask aswell... when done with painting can you put the wheels back on or do you gotta wait for them to dry up?
@Lethalgarage8 жыл бұрын
+David Garza it should
@Lethalgarage8 жыл бұрын
+David Garza you can out the wheels back one once your done painting.
@anthonycaldi70563 жыл бұрын
Looks Amazing...How well does the paint level out as it dries? Looks incredible!
@Lethalgarage3 жыл бұрын
Pretty good when it is warm.
@Abandoned_480p4 жыл бұрын
Does this stuff blend/self level? Looks good man!
@thatguy-ve6mb4 жыл бұрын
How did u lift your entire car with just 2 jack stands?
@Lethalgarage4 жыл бұрын
Two stands and a jack
@mramosmix8 жыл бұрын
was one package enough for all 4 calipers?
@Lethalgarage8 жыл бұрын
+Amos Mix oh yeah. Had 1/2 a can left over.
@theboo4u7 жыл бұрын
Did you paint the back of the calipers as well? Would there be enough paint to do it? Love your vids man, keep it up!
@Lethalgarage7 жыл бұрын
I did not, but you have more than enough paint to do both sides
@interamerichanic6 жыл бұрын
How much drying time between coats?
@Lethalgarage6 жыл бұрын
10-15min depends how hot and humid it is
@FishPhoenix7 жыл бұрын
Very informative vid man! Thanks so much! I have a white 2017 2SS - I'll be using the G2 kit tomorrow to paint my calipers.
@Lethalgarage7 жыл бұрын
Thanks
@efieldson61266 жыл бұрын
how did your come out fishphoenix
@lanesteele2406 жыл бұрын
Any brush marks in the paint
@Lethalgarage6 жыл бұрын
nope
@lanesteele2406 жыл бұрын
LethalGarage thanks
@mukio9008 жыл бұрын
Dude, I noticed that you didn't use all four stands on the car, is there a reason for that?
@Lethalgarage8 жыл бұрын
+mukio900 had it mounted from the rear brace.
@moeabulaban8254 жыл бұрын
Great video and very informative. i just had a couple questions: how long do you have to work with the paint (thats in the can) before it starts to harden up? ive read on line that you have about an hour before the paint in the can begins to harden up, is this true? also with the brush method, do you get any orange peel look to the paint on the calipers?
@Lethalgarage4 жыл бұрын
I completed this all in a hour. So beyond that not sure. Depends on the application for orange peel. But if you want perfect get them powder coated.
@davidcrandon23294 жыл бұрын
@@Lethalgarage You put 4 coats on all calipers in 1 hour?
@Lethalgarage4 жыл бұрын
@@davidcrandon2329 Correct
@robsclusive8 жыл бұрын
Hey Sledge, how's your G2 paint holding up? Ive been going back and forth if I should do it myself or get it done at the shop. Great vids as always.
@Lethalgarage8 жыл бұрын
+Rated Robsclusive no chips and is as shiny as the day I put it on.
@robsclusive8 жыл бұрын
+Lethalhammer sounds good man! I'll definitely do this soon. I've used only Dupli-color kit and HTV before.
@barantb8 жыл бұрын
Im looking to get the yellow on my red tC and Im wondering if I will need two kits just to be safe, I would hate to not have enough but I also dont want to spend that money just to not need it. Do you think one kit will be safe and how many coats do you usually do?
@Lethalgarage8 жыл бұрын
+barantb 1 kit is more than enough.
@barantb8 жыл бұрын
+Lethalhammer how many coats for each caliper?
@Lethalgarage8 жыл бұрын
+barantb 3
@Lethalgarage8 жыл бұрын
+barantb hit send to soon. 3 good coats is more than enough, 4 is almost overkill
@Detroit-he2pm7 жыл бұрын
Where and how much did that system cost?
@Lethalgarage7 жыл бұрын
Link in the description. G2 paint kit from Amazon.
@Detroit-he2pm7 жыл бұрын
LethalGarage It's been a little over a year since you did the video. How is the paint holding up and can you do a video on it?
@Lethalgarage7 жыл бұрын
+Detroit 1030 paint is fine, no issues
@jaredamurray7 жыл бұрын
Overall, are you pleased after it sat?
@Lethalgarage7 жыл бұрын
Oh yeah
@jaredamurray7 жыл бұрын
Looks great man. One other question, how long did the entire process take? Also, the brake cleaner can that drip on the rotor after spraying? Thanks again
@Lethalgarage7 жыл бұрын
+Jared Murray took me about 2hrs to prep and paint. Yes the brake cleaner can get on the rotors
@jaredamurray7 жыл бұрын
Lol, sorry for all the questions!! Finally got my kit, I have lowering springs on it did you run into any rubbing issues when jacking up your car on floor jack's? Thanks again man
@Devyn878 жыл бұрын
Keep up the great videos! This channel is the reason I get on KZbin. Someone with my favorite car upgrading it multiple times a week. What could be better?!
@Lethalgarage8 жыл бұрын
+Devyn Brady me having time to update 3x a week?
@Lethalgarage8 жыл бұрын
+Devyn Brady me having time to update 3x a week?
@Devyn878 жыл бұрын
+Lethalhammer definitely arguable ha. I'm always asking myself, "how does he find time to sleep?"
@Lethalgarage8 жыл бұрын
+Devyn Brady sleep???
@manuelz32u608 жыл бұрын
I installed the throttle controller and now my engine light is on, is this fixable?
@Lethalgarage8 жыл бұрын
+Manuel Ureña Remeove the controller and drive 20 miles. Reinstall and re-calibrate it on how my video shows you or how the instructions outline. The check engine light will come on when not calibrated properly.
@tigerbalm6668 жыл бұрын
Use a heat gun to dry faster! You can wait a few hours, or heat gun a few minutes...you should heat gun last coat anyway up to 200 deg to cure it.
@Lethalgarage8 жыл бұрын
That is true. a heat gun would have helped and I have one.
@victormelendez46694 жыл бұрын
Awesome video!! very detailed thanks
@tonydesanto32384 жыл бұрын
Thanks for the video. Seriously, though, get an extra pair of jack stands.
@rashadm.sadigov43668 жыл бұрын
Great choice of the music too. Awesome job
@Lethalgarage8 жыл бұрын
+Rashad M. Sadigov Thanks
@duckhead07 жыл бұрын
I painted my g37 xs calipers this past weekend, went very smooth, however after day 1 I was 50% done. I put the paint can lid back on tightly, left it on the garage floor over night and that next morning the paint had become jelly. The temp only dropped down to high 40s to 50s. I would think a 50$ kit would not do this. Anyway I compromised and put duplicolor caliper paint on the left side, but brushed on 4 coats, 3 with the G2 on the right side. Lesson learned, don't leave your can in the garage over night!
@Lethalgarage7 жыл бұрын
Derek, the mixture is a hardening agent. if you don;t complete the work in 4 hours it will harden. It outlines that on the box and I outline it in the video. You have to do it all in one go, or you will run into what you did.
@duckhead07 жыл бұрын
I guess I missed that in ur vid. Yep it did harden! Thanks anyway!
@bobayrsman31978 жыл бұрын
/great video I am doing this to my 2015 Camaro RS convertible. It looks great!
@wrxTO3 жыл бұрын
Why didnt you turn the wheels for easy access? Lol
@ProGridironTalk6 жыл бұрын
Quick question man. Did you only use two jackstands to hold the car up?
@slothin218 жыл бұрын
I think I'lll wait till the calipers come off. I'm sure you'll be doing a video on that soon once you replace the pads :) Thanks as always
@Franchiskka8 жыл бұрын
I've watched your video about 3 times already and I feel pretty confident I can do it my self now 😁. Very informative video !!! How long did it take you to do the entire process ?