Why This Cheap Amazon Spray Gun is Better than Most Expensive Spray Guns

[@frankgerardo8977]

Thank you Brian and I deeply respect the wisdom of words: "A good painter with a bad spray gun is better than a bad painter with a good spray gun". Because our first priority should always be to become better painters, owners of better guns is only second.

[@PaintSociety]

Pinned!!!

[@joehobo00]

Tiger Woods could play better golf with my clubs than I could with his.

[@____MC____]

At the same time youre only as good as your tools will let you be.

[@mikedmt]

I'm just a hobby builder out in my own shop, and I bought this same gun after the review Brian did a couple years ago as my "good" gun. I set it up just like he did, PPS, decent regulator.. It does everything I need it to and is easy to get good results with. Kind of cool to see him bust it out all this time later and have it still rank high on the budget gun list.

[@justy1606]

I did the same thing after his first review.

[@Eduardo-vv6lm]

What are the settings?

[@Trueno1600]

About your "factory orange peel" discussion, it reminded me of one of my old bosses that teached me a lot... He always was the only one doing the painting because, well, that was his favorite thing. He did a few restorations and mirror like finishes in the past, but his bread and butter was insurance work. And he got so good at spraying paint that he knew how to set up his gun to mimic that factory orange peel on every particular car!!!! I never learned his secrets as I was more a dismantler/metal work guy, but your videos are a huge help taking the anxiety off and understanding how the qualiity is in the know-how and not necessarily the equipment!

[@alleybuilds5370]

i bought this gun 2 years ago when you did your first review, let me tell you hands down best gun! There is no need for a better gun than this, unless you are painting everyday.

[@omorin34]

Bought one a few years ago based on your recommendation. I'm a DIYer and I don't have a booth. I will say this gun helped me fix my orange peel issues, it is easy to clean and unlike other cheap guns, it sprays consistent over and over. The other cheap guns I tried seemed to work well once and they were garbage.

[@bradreeves7534]

I have 2 of those one I use for primer 1.7 . I get good customer support for getting additional tips. I love them. I worked in small shops in the 70s used siphon guns mostly binks and Sharpe . Starting up again all new paints and equipment has been a challenge especially the keep moving old man setting. Thanks for the video. Still able to buy those for under 80 bucks.

[@lemoneleven2179]

watched almost every video on this channel, bought a couple astro guns last year including that one, did a few jobs and i cant thank paint society enough. what a journey its been! this is the absolute best painting channel on youtube.

[@Jim-fe2xz]

Key phrase + "it really doesn't make a difference if you know what you're doing"! Great review and lessons as usual.

[@Fiveliterdave]

I have 3 Astro guns I've had for probably 20yrs+ they have always been an awesome value for someone that's a DIY occasional user like myself.

[@moreheadpaints]

Been using this gun exclusively in the garage for years. I like to turn the fluid in 1 turn because it's fast like you said and I was dealing with runs. 1 turn in on the fluid and slow down a little.

[@RoadratEddie]

Have had 4 of those for many years now, 2 minis and 2 full size...They were bright green then....Love them

[@gtplumbing2004]

Dude, you are deep. Watching your videos, I feel like I'm in paint college. Brian, you are the man.

[@slyvendetta7192]

I just received this spraygun in the mail yesterday which i ordered using your link in the description!! Thank you so much brian!!... you've helped me a ton!..much love bro❤...keep it up!!..im gonna attempt my first ever spray job on my car using knowledge i learned from you an other KZbin channels...i believe im a natural an should be able to get a 7/10 finish atleast

[@PaintSociety]

Good luck my friend!!

[@i8ntnuts]

Yep, I believe that. Some people are just born painters then there are some people that just don’t quite get it.

[@tklykun9858]

I keep this gun on a stand on my bench so I can see it everyday. Its the best one I ever had as a 71 yo diy.er Best Paint Channel on You Tube. Not surprised that your invited to SEMA Brian just remember its just paint LOL!!!

[@tomturnipseed2541]

I love watching your video's.........informative, honest, and down to earth!!! I agree with you.......the equipment is part of the outcome, and the skill of the painter is the balance!

[@PaintSociety]

Thanks for watching!

[@lazygamer9725]

Astro for the win.... he and the orange n green one too

[@jayhawk7323]

Hi Brian, I'm new to using a paint gun and was wondering if you can help me set up this new paint sprayer that I got at an auction. It's similar to the one in this video. Thank you! I just wasn't sure how to adjust the fan, fluid and air levels.

[@jayhawk7323]

...how to set them up to the proper levels...

[@jayhawk7323]

Also, when I was cleaning the gun, there was a tiny thin gasket inside the sprayer nozzle that I damaged when cleaning it. Do you know where I can get these thin little gaskets for the nozzle tip it was about an inch in diameter?? I also have a second spray gun that I got at the auction. Do you know where I can find a cap lid for the cup? It's an aluminum paint cup. It's one of those smaller paint cups that goes on top.

[@tvwatcher9291]

Great video and lesson for all us painter newbs. Skill first :)

[@scottyjue3125]

Great Teaching Video Brian!! I'm Thinking of Painting My 1972 Chevy Blazer Myself After I Purchase This Gun. Thanks, Scotty

[@arfreeman11]

This might be the best budget how-to paint video I've seen. Especially with the inclusion of the shopping list.

[@Bradley_Clark]

Pretty sure Brian has the talent to blow on an OE finish with a Wagner Power Painter😊 I've noticed you flick your wrist at the end of each pass. Helps keep build thickness even? Thumbed

[@capeman10]

Thank you for sharing your knowledge. I'm not a painter, never tried but want to and you have given me the inspiration to give it a go. If I screw up it's just paint right. ✌️

[@ON-THE-DRIVEWAY]

I've followed Brian now for years, I'm going to paint my cars bumper using the help Brian and his videos, let see if someone in US can teach someone in UK 👍, Thank mate for years help and tips on spaying paint, 👍👍👍👌

[@fiily1]

Sold my 3m performance 2.0 gun for this one HE astro one, the 3m adjustments were janky at best. Painting a grey metallic and looking forward to seeing how well this gun delivers with base/clear.

[@1manshtshowandautobodystuf891]

Been using these for years.

[@100amps]

Thanks for the tutorial on the orange peel goal.

[@dom6512]

I have used the Husky HVLP guns from Home Depot for many years. I have tried many others and always go back to the $70 gem. I hate the side mounted pattern knob style. It's right where your thumb should be, so it gets in the way and is too easy to knock out of position.. I much prefer the inline adjustments. I've been spraying for 28 years now and swear by the Husky guns. They are produced by Florida Pneumatic for Husky. They even come with 1.4 and 1.8mm needles and tips.

[@johnburton3582]

Superb advice Brian yet again. Thanks alot..

[@honeyforce996]

14:30, so this gun is the best value gun? It's better to spend @$30-100 on this, than the $50-100 on the r500/a610, 4000b, the TE20/T110, black widow, W101, ntools clone, or any of the others?

[@shedbuiltcars2999]

yeah i went the cos i want it path, however, i do have3 cars to do, so i validated it that way i already had a star POS with a 2.5 for putty az3 for primer with a 1.8, but.... my actual panit gun grew legs and walked away so now DV1 Digital with b+ and C2, I am ordering the c1, as the C2 may not be to my liking, I dont know yet, been 10 years or so I guess since I painted One question, do you rate the PAINT GUN LIGHTS, you know the ones that stick at the cup end ?

[@douglash3129]

Hi Brian, I do some paint work, and I used to do alot more and was pretty comfortable. Now I paint 2 or 3 times a year and I am a nervous wreck and that is mostly because materials are so expensive. Before if I made a mistake I just fixed it! Now in the last 2 yrs. that I have been watching your videos I have made progress toward the confident side again. you Sir have helped me alot and I thank you! Have you ever tested Eastwood's LT gun?

[@ronallen6578]

I bought an LT100 and sprayed my very 1st and probably only vehicle. It was a challenge only because I had NEVER attempted such a task. After many, many coats, sanding those down, starting over and repainting it turned out decent. Showroom quality---not even close. But with some buffing and polishing it's OK. Love to redo it just to prove I could, but as my neighbor said, it's a driver so drive it😊

[@mrmidnight32]

Can you please reference the gun and 2 others you recommend in each video? Comparable or cheaper that’s better. Since you make so many videos and so many guns it’s hard to keep up. That way we know which guns are comparable like for this one if it’s sold out which you also compare it to

[@jamescolgate5497]

Brian, thank you for all you do for people who are trying to learn how to paint your expertise and knowledge is awesome . I am into the LVLP paint guns and I have a small compressor 27 gallon. But what I'm wondering is with all the low volume. Low pressure guns that you've used on any of your videos. I've never heard you mention what size compressor you use with those guns. Other than the 1 video with the pancake compressor but I'm not using that gun or compressor.Id like to see which guns lvlp work best with a 27-30 gallon compressor.I'm using the arrow R 500. Id venture to say that most of the DIY garage type painting guys use a 30 gallon compressor. Thank you brother,Jim911

[@wingman8447]

Always a good lesson. Thanks

[@DanTheManIOM]

I don't know what I am doing ! At school, we had SATA and I got results I was happy with. Wonder if this would be ok if i painted at home with it. On the fence about the Master Elite Pro-44 / 88 that was in a older video. Hmmn.

[@jayhawk7323]

Hi Brian, I'm new to using a paint gun. I just bought one at an estate sale that's similar to the one in your video here. I'm wondering for the initial setup, how to adjust all of the knobs. Can you advise advise on how to initially setup the levels for the 3 knobs for the fluid, air and fan levels? Thanks! 👍😁

[@Jesusisnotwhite777]

I was spraying benz leaves nice texture

[@AintScaredGarage]

I wish I know how other guns work cause I bought this on first, and as a total amiture, I lay down paint so well with this

[@srt-4-thompson]

So i get some thick orange peel on my clear every time. And have to sand and buff.. how do i lighten that orange peel up.. turn the fluid knob in some, Or pressure down, i usually run 23 psi, maybe 25, depending on the gun i use.

[@jumpinjojo]

Decrease fluid or increase pressure.

[@srt-4-thompson]

Thank you

[@MatthewMaas-i9y]

I bought the Harbor freight HTE Spectrum gun. I put down my second try at paint after trying to get my fan to work on my central pneumatic HTE purple HVLP 1.4 tip gun. The HVLP would just splatter the paint and leave dry patches inconsistent while doing the plastic front facia on my truck. So feeling confident I went ahead and used the Spectrum HTE 1.3 tip and sprayed my single stage on the truck bed with a perfect finish and no fluctuations in fan pattern or adamisation like the cheap HVLP Central Pneumatic did. Literally in the middle of my first paint job and have learned a tone from this gentleman. So my question is that is an HTE or an HVLP better? I am tempted to try an HVLP in the Harbor Freight Spectrum just to try both in the same quality league. Any experienced thoughts or info to help would be appreciated.

[@alij.7390]

Great content Brian!

[@leroijr407]

Can you do a paint gun verse paint gun? That Astro vs R500? The R500 is another top so called 90 dollar Amazon hvlp. Some say the best. Idk..

[@danamcintyre3565]

1:23 Brian how many air holes does yours have 1:30

[@donaldwilcoxjr.5212]

I have been building a 1998 s10 for few years now ....I had one years ago when I worked part time in a friend's auto body repair shop i did a frame off custom build custom paint ....and sold it ...regrettedit .....I am going to do all the body work and paint on my 98 myself at home ....I don't have a booth but plan on making a make shift one outta of a metal carport and some plastic ....need a good cheap gun to shoot my sealer base and clear with ....would you suggest this one ?

[@MurdahBassRecords]

Bryan im going to do my entire truck. A 2012 sierra 1500. Primer. Base. Clear. Can u suggest which gun for clear? And can i use the one in this video for primer and base?

[@tonyjr6790]

Hey buddy love all your vids really learning alot but really confused about gun choices, I'm using u-tech. The primer came out perfect 1.8 nozzle, just not sure about spraying the U350 single stage RM set-up can a use a HTE 1.3 like a blackwidow thanks

[@johnbatalle6500]

How do you know what clear coat to buy? PPG? Sikkens? Matrix? "General" versus "Euro" versus "2k" etc etc? I looked online and saw something called "Prime PCX-25" but can't find any reviews.

[@timothywissman9668]

Hey Brian big fan!!! You have taught me a lot over the years… Quick question… For someone like me that’s just looking for a good gun for no more than a couple hundred bucks, which gun would you recommend. The Astro Euro Pro or the 2.0 Blackwidow?

[@bosshawg7427]

I don't think people realize how long the Euro series actually has been around (at least 10 years!). It's just had a recent resurgence in popularity. It's a highly underrated gun and impressively light & smooth.

[@kevincontreras6472]

Hey Brian, me and some buddies are getting into paint and we even got a small shop to practice in my question is what air compressor would be good to start with for a paint shop, or at least what air compressor specifications should I be looking at having for a shop that would run at most two spray guns at the same time sometimes but mainly one spray gun always

[@gol10dr45]

@paintsociety I just bought this gun for a project I am doing. What Air pressure do you recommend me starting at with that Astro gun. I don't see a 'max air pressure at cap' on anything I got.

[@nickcrill7718]

Ever nibbed out a dirt speck on a black panel and it become a white dot? What would you do in that situation?

[@lorenweatherby6520]

Brain What type of paint lids do you use to seal and pour gallon and quart cans?

[@BluegrassIomc-zy1nu]

Hey Brian! Is there an all in one knock off paint stand on Amazon that you can recommend that don’t take up a lot of room for storage that is pretty much an all in one kinda stand? One that you can hang a fender or two on or a door or a hood? Not necessarily all at one time but can handle the weight of a door and the width of a hood? Thanks bud

[@edb9564]

Can you tell me which gun is better, the blue one (you showed) or the green gun? Thanks!

[@carbonfibercreationswashin7213]

Is Azkonobel as good as Sikkens and how does it compare to the coverage of PPG dbs?

[@billlear5607]

I've been watching a lot of videos on the new revised harbor freight Black widow. I was done set on buying it. But one video said it requires a lot of air. Preferably an 80 gallon tank. So my question is this Astro gun for smaller compressors.

[@bosshawg7427]

For a small compressor, I'd choose one the Rongpeng R500 based guns like Inokraftz, Aeropro, LT100, etc. The Euro is in between as it does consume a bit more air than the R500, but atomizes very good at only 20 psi with low overspray. IMO, it's better than either gun if you have the air supply. If not, get a R500

[@tubbed68cuda]

Which cap and needle set would you for primer with this gun?

[@markpinther9296]

You likely have videos out there on this but I would like to see how to properly clean and store a paint gun and its tiny parts.

[@jamesriley4857]

Wish it was as easy as buying a gun. Dry clean air is the key

[@jameserickson1330]

What CFM compressor do you need for this to work well Brian?

[@dAg-1-2-3]

what psi where you running on the clear I just picked up this gun

[@Bodyartbywill]

Do you still take the filter out like you did on the other gun?

[@yourfather5324]

What psi do you set for base and clear?

[@epicasmasher5504]

Muchas gracias Brain buen video

[@canadianpainter8344]

Awesome Brian

[@stevewayne3676]

Just bought the gun. Please tell me a cost efficient brand of paint for a garage paint.

[@corvetteguy2629]

I thought the 1st coat of clear he was going to lay it on light looks like he pounded it on ?

[@PaintSociety]

It is light. The camera makes everything look glossy

[@jackwells1452]

I DK if you ever used a intertool Storm I bought one to paint my wife's bronco, me not knowing a good gun from a bad one I would like you're opinion

[@ericdoe4746]

What min cfm compressor would u recommended to use?

[@IxACTiiONzZxI]

Brian what psi for clear??. Thanks

[@Erik7prc]

I like this one but man.......that Vevor hvlp is my favorite budget spraygun.

[@cesarmunoz9154]

Hey Brian what clear do you use at your shop?

[@lorenweatherby6520]

Hi Brian Is this still the best budget gun as of 3/24 ?

[@PaintSociety]

Yes

[@gbitpal]

Can I buy with the gun additional nozzle?

[@ericksanchez9407]

What size tip do I purchase this gun with ?

[@turbocivicsi1383]

Would love to see a video on how to just repaint a car that has good paint and good clear i have a black car but i want a different black or maroon

[@PaintSociety]

Just scuff it with 600 grit and paint

[@michaelthrelkeld212]

Curious can you run a 0.8mm nozzle?

[@williamhanna5224]

Excellent !

[@Axgoten]

@paint society what mm tip size did you get?

[@jonathanmcnett8708]

I see you set up the gun liquid to run wide open. Does that mean your hand is also running it wide open?

[@jonathanmcnett8708]

What pressure are you running?

[@arvizu619]

@PaintSociety Great Review ! Do you think this Astro is better than the R500/ a610?

[@bosshawg7427]

Personally, I think so. The feel is much smoother and puts out more fluid without having to turn up the pressure.

[@IxACTiiONzZxI]

And how many turns from closed for fan...

[@RandallSoong-pp7ih]

Awesome!

[@vlogbyprash]

Spraaayyyyyeahhhh 👍🏼

[@danpascounedited4240]

What size tip do you recommend for base / clear

[@jumpinjojo]

1.3

[@Carlos-r5n2b]

Any electric painting systems no matter how much i try to prevent water in air it pops up. I use 1 compressor to paint. Don't even use it to pump up a tire. Im good on small projects but a whole car... Not so much.

[@honeyforce996]

Is this the H827, or the Astro Europro, or the Auarita 898, or the burisch gtr500, or the "fast mover"? The H827 / h827b, w, g, etc. seems to be the most popular gun on AE for

[@bosshawg7427]

It's neither. The Euro series are one-off. The only company that shares the same is Star, which Star & Astro have been doing for years. Star is just the Australian version.

[@jmy6050]

I have 3 spray guns and the cheaper of the 3 (at $100) gives the best finish of the 3.

[@jasondelvecchio6942]

What’s the knock off stand don’t see the link

[@PaintSociety]

Hi. Just updated it. Check it out

[@jumpinjojo]

Painted my truck with this gun. Came out very nice and I’m a horrible painter.

[@saseman5875]

well said

[@aricy1180]

This gun is 1.3mm or 1.5mm ?

[@israel9294]

Do you recommend this gun to paint a whole car ?

[@Nakai2024]

bro just loves breathing in paint.

[@CRFHONDARIDER100]

I’ve been painting about 3 years 2 maybe 2.5 years everyday in the booth I picked it up pretty quick and can lay it on like the 20 year painters in the shop. Not my compliment to myself just had some good guys and even better teachers along the way who pushed me to achieve far better than commercially acceptable. I have sata jet x5500’s and do well with them I’ve used a demo devilibus but the sata is my preference. After watching some videos and having a buddy buy the 1.3 hte from harbor freight and it actually amazed me for the money so I bought one with a coupon. The guys I worked with before I left to be the head painter at a dealer near me always told me the gun doesn’t make the painter . I honestly use the harbor freight gun for clear more than I do my sata it just seems to make it seem visually flatter without trying . I am using high solids clear that isn’t reduced so I probably need a 1.4 or better instead of my 1.3s but the black widow seems to put it on a little thicker so i don’t have to slow down like I do with my satajet obviously I can get a great finish with what I am comfortable with but the price of the fun does not matter like some people think. I doubt it will last as long as a sata will but I’m anxious to see . I really like your budget gun videos as you prove my point often . Being a 24 year old kid I assumed the guys would doubt me but so far I’ve been able to have their faith .

[@stevek758]

I bought this gun and it has no Option for a smaller cup. I tried every site if anyone has a suggestion. Even adapters are non available. i want the Cup not disposable

[@canadianpainter8344]

U didn't put the link for knock off bumper stand

[@PaintSociety]

Its there 😇

[@lgull1]

yes the gun matters, but the painter makes the final product. he is a very good painter.