Pair Smart Key Remote FOB Program Silverado GM 2015-2021 Cars and Trucks

Pair Smart Key Remote FOB Program Silverado GM 2015-2021 Cars and Trucks
Written instructions: www.programautokeys.com/class...
Purchase a Key FOB: www.sffobsinc.com/
#phoenixhavengarage #keyfob #pair #reprogram #remote
The music in this video is "Doc Holliday's Gun Show" by TeknoAxe (royalty free): www.teknoaxe.com/Link_Code_3....
License: creativecommons.org/licenses/...

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@terryjohnson3383]

Are there any instructions for key that has to go in ignition? I have keys programmed as Driver 2 and Driver 3. I would like to reprogram my keys as Driver 1 and Driver 2. Is there any instructions for that? (2018 Suburban)

[@PhoenixHavenGarage]

@@terryjohnson3383 I think it's the same procedure as this will clear all FOBs associated with the truck

[@terryjohnson3383]

Well i think the fobs are fine. I want to know if the keys are totally separate from the fob. Basically once I put my key in the ignition, it says Driver 2 memory. With my other key, it says Driver 3 memory. Will this method erase keys or just fobs?

[@PhoenixHavenGarage]

@@terryjohnson3383 sorry, I do not know.

[@halfassgarage9650]

I don’t ever comment but this actually works and saved me 500 bucks

[@ssjdende]

Just did this today on my 2021 sierra! worked perfectly! Saved me over 400 dollars.

[@Dav1dwuzhere]

I lost one of my key fobs and felt really uncomfortable not having a backup. I ordered one after watching this video because you made it so simple. Everything went exactly as your video explained. Thank you, kindly!

[@StevePrunty-gf5cw]

Worked like a charm on my 2021 Silverado 3500 with a new fob from amazon! With bucket seat/center console interior, place the fob in the rectangular area between the two cup holders to program. Thank you for the video! Saved me some $$$!

[@LeisaHallman-zv5xp]

I just used your video to program one off Amazon and it all works perfectly and I took our truck key out of our second GMC one, which had been ran over by a school bus, and inserted it in the Amazon one. We now have two perfectly working keys!

[@PhoenixHavenGarage]

That's awesome, I hope the kids on the school bus are OK 😁

[@coachwilson954]

If you put the existing working remote in the cup holder before you start, then turn the key counter clockwise 5 times, the display will show “ready for remote 2” and you can program the new remote without wiping out the old one. Also, adding a key doesn’t take 30 minutes, takes about 15 seconds If you have NO working keys at all, then the 30 minute procedure is essential.

[@travisdieringer3420]

Any idea why when I put my fob that works in the cup holder, and turn key 5 times, I get start vehicle to view application

[@armandojimenez8342]

@@travisdieringer3420i get that with mine too

[@danielwhite1583]

Is this how I would do it for my 2019 Silverado LD?

[@ACheriBerry]

This only works on certain models and if you have 2 keys already programmed

[@alongwithposeidon2323]

​@travisdieringer3420 It's a default notification that you need to dismiss. The key program notification is behind it. I just made this mistake 10 minutes ago. Now I have my 3 keys numbered wrong, and the 4th key will not program. I think the maximum is 4 keys since it won't at least let me program the 4th key as the 5th. Since I'm picky, I'm going to delete all programed keys and start over.

[@PopeyesPostcards]

Thank you for this video. Dealership wanted $500 for a replacement fob. $30 OEM from ebay and your video saved me $470. I did not get the extra fob key cut yet, so I'm sure that will be a few more $$.

[@ChasingTravelAdventure]

OMG!!! 😳😲 I looked for a key online but couldn’t find one!!!! Never thought EBay 🤦‍♀️🥺 So I bought one from dealership 😢 BUT it was lunch time so they couldn’t program it (1 hour and ANOTHER $170) he told me!!! I was bummed and told them I’d return!!!! SOOO GLAD I FOUND YOU!!! I am trying this myself!!!! A friend of mine told me look on KZbin for a tutorial I was afraid I couldn’t find one!!

[@txtpqb]

thank you sir for a very detailed video on this. I followed it and the procedure worked in getting a 'failing' key fob to work. We purchased a used 2020 Silverado a few weeks ago and they gave us two fobs with it but we didn't try the 2nd one until a day or two ago and it would not do anything. Found your video and it has saved a trip back to the dealer, possibly two times to allow them to do their 'thing'. Thank you so much again!

[@PhoenixHavenGarage]

Awesome! I'm glad this was able to help you save $ and time

[@midnitelane3529]

Just used your new key khob steps on my 2019 Chevrolet Silverado 1500 RST and it worked just as you said thanks for the how to video.

[@PhoenixHavenGarage]

Awesome, I'm glad it worked out for you!

[@Raiders1234]

Worked great and explained well. Thanks!

[@davileett1224]

Worked for my 2021 GMC Sierra. Thank you for making this video

[@alochoa14]

Worked like a charm. Thanks, Bud!!!

[@619jcinco]

Thank you so much!! I Just did this for my 2021 Silverado LT Z71 worked like a charm!!!

[@nobracing]

Works like a charm. Thank you!!

[@mnthundercat]

2020 sierra 2500 at4… worked great! Thanks

[@jamalscott4872]

Thanks man!!! I hit it done easily. For different model trucks the key fob holder is between the cup holders. Now just gotta go get my key cut!! Appreciate ya!!

[@PhoenixHavenGarage]

Glad it worked out!

[@Backyrat]

Worked perfectly! Could not have done this on my own without your video.

[@PhoenixHavenGarage]

I'm glad you saved some money and got it working!

[@billdowns1510]

Worked perfectly on my 2020 trailboss. Thanks

[@ddepies10]

Worked step by step excellent on my 2020 RST. Thanks for the video.

[@PhoenixHavenGarage]

Awesome!

[@claddagh1000]

Just received my 2nd key fob from dealer since my 22 Sierra only had one fob and luckily the dealer had it cut already ( they already had my Vin so that how they probably were able to). Your video worked perfect saved me $115 locally to have it programmed

[@PhoenixHavenGarage]

Awesome, I'm glad you found this video!

[@ortega181956]

Thank you so much. Your instructions were well appreciated Worked the first time. :)

[@PhoenixHavenGarage]

I think the 10 min wait times are so the dealer can charge over 30 min of service time to everyone

[@steve-o9612]

I watched your video and I was able to reprogram 2 new key fobs. Thank you very much!!

[@PhoenixHavenGarage]

I'm glad it helped you out!

[@XXLbloodlines]

Thank you so much worked for my 2020 trailboss

[@valeriecesario2340]

Worked perfectly! Thank you so much

[@marcoramirez4233]

Thank you!!! It worked !! Appreciate it!!!

[@pewpew1042]

Used your video today on my 2020 GMC Sierra. It only had one key fob when I bought it. It has the split front seat, so the programming pocket is between the cup holders, but the procedure worked perfectly. Thank you for precise, accurate instructions. Everything was spot on!

[@PhoenixHavenGarage]

Awesome, I'm glad it worked and that you didn't need to go to the dealer and pay 💰💰💰

[@pewpew1042]

@@PhoenixHavenGarage Me too! Found a new, GM packaged key fob online with a blank blade key, had a local locksmith cut the blade for $40, and followed your video. Being able to wipe and reprogram my old one and the new one was exactly the info I needed, so thanks again! Much cheaper than the dealer’s $400+ quote for a new fob.

[@kelsohorst8450]

Worked perfectly. Thanks!!

[@utubezgurl]

Very helpful, thank you for this video!

[@PhoenixHavenGarage]

Thanks for the support, good luck!

[@texasnative]

Hell yes it worked. Many thanks for posting this video!!

[@PhoenixHavenGarage]

F Ya! Glad you didn't have to go to the dealer!

[@charlesfrasher723]

Awesome video this work on my 2020 Silverado 1500 Duramax my remote had to placed in between cup holders

[@memes_6980]

Thanks for the video. Everything worked like a charm and you saved me a good chunk of money.

[@PhoenixHavenGarage]

I'm glad you found the video!

[@josecolon9588]

This was Great 😃. Thank you

[@casey7091]

Thank god for KZbin the dealer wanted to charge me 150 to do this lol thx again !

[@jimwright5828]

Worked on my 2020 Chev Silverado 🎉😊

[@dmac5994]

that 12 second hold is something NOT in the manual and is critical. thanks for bringing that up. had accidentally cleared my 2 good fobs trying to add a 3rd, had to go thru toe no recognized fob procedure.

[@estebansalcido5015]

Yours the best man!

[@domiano96]

Thank you! The dealership could have shared this with me instead they told me to have it towed to them.

[@PhoenixHavenGarage]

Wtf? That is unbelievable! I'm really glad you found this video and saved yourself hundreds of dollars and time wasted with them.

[@jimkress5929]

worked perfect thank you!!!

[@Anvita444]

I did this. FOBS still don't work. Replaced battery's. Had the front 2 windows and windshield tinted with ceramic film today. Started when I got truck home from shop. Water all over the dash when I picked the truck up. Awesome. Thanks guys. Now the the tire pressure sensor monito warning light is on as well. Sweet.

[@victormaldonado7595]

Same thing just happened to me today after tinting my windows and windshield did you get it fixed and how

[@Anvita444]

I did what the guy did in this video... Next morning still didn't work. I drove it for a few hours and it just went away. I think it's moisture in the sensor in the dash. Needs time to dry out.

[@albertfuentes4386]

Worked beautifully

[@Anvita444]

@@albertfuentes4386 nice. I actually got it to work for me as well...i think....I just drove it for a few hours the next day and the FOB started working again....I think running the heater for 3 hours just dried things out

[@JAIMEDELALEY]

Thank you! Just saved me a couple hundred dollars the dealer wanted to charge me to look at it 😊

[@PhoenixHavenGarage]

Yeah, to hell with them! I'm glad you found the video!

[@pgibbons72]

Worked with non-OEM $30 fob. But have to put key in transmitter to start 😕. Remote start, lock/unlock, and tailgate buttons work.

[@pbar41]

Thanks!

[@brianjuarez8493]

Works for 2021 silverado 1500 LT Trail Boss thank you 🇺🇲💪🏽

[@fletch4813]

I have identical rig so hope this works

[@sohelsaleem2578]

Thank you! Was successfully able to program second key. However, the trouble tap to open lift gate is not working on new key. It works with the original key. How do I program that?

[@MZN3N3123]

What if I only want to program a new fob but have my old key? because my remote start stopped working on the old fob so I bought a new one without a key

[@georginarivera6945]

I did this on my Chevy Silverado 1500 2021 Trail Boss worked with my original fob was trying to program the spare key fob they gave us at the dealership which turned out to be a dud does not work but now I have the car lock symbol on the dashboard( the theft deterrent system) anyway you can make a video on how to reset that I've already tried unplugging the battery no luck thanks for the video great job

[@PhoenixHavenGarage]

I found this To reset the anti-theft system on the Chevy Silverado You will need to get into the car and lock the doors. Now with the doors locked put the key into the ignition and turn it to the on position. Let it sit there for 5 minutes until the anti-theft light blinks. Once it blinks You will need to turn it to the off position, then turn it back to the on position. Now wait for a min and it will blink again. Turn it off then on one more time. When it blinks for the third time go ahead and start the engine. The anti-theft is now reset. www.vehiclehistory.com/questions/how-do-i-reset-anti-theft-system-chevy-silverado-93695 Just push the ignition button to put the truck into the same selection/position as mentioned

[@leir2005]

Giving away dealership secrets man because isn't this the same thing that they want to charge you north of $500 to do there?

[@PhoenixHavenGarage]

Yes it is

[@B.I.-EIO_macdonald9786]

I don’t know you. Nothing personal but i think i ❤You. 😮🎉

[@ronedwards6622]

What year is your truck? Did the tailgate release work? I have a 2019 GMC Sierra AT4. Thanks for any info.

[@PhoenixHavenGarage]

2019. Yes everything works

[@uscstaylor]

Do you need to press the brake before you hit the start button? Thanks ordered my key today!

[@PhoenixHavenGarage]

no

[@bigwoodshunter6587]

Will this process work on a 2022 Silverado?

[@chrisrowe2852]

Thanks saved me $80

[@PhoenixHavenGarage]

🤘🤘

[@kensperone7792]

Will this process work with a 2018 Silverado? I have no key fobs now and need them. I have already bought OEM key fobs. I just need to program them!

[@PhoenixHavenGarage]

I honestly don't know, but the link in the description of the video should have written instructions for all makes and models.

[@DirkHagandTruth]

Did you have to get the new fob key cut to the old one or does it work uncut as it comes in the package?

[@PhoenixHavenGarage]

You need to get it cut. What is funny is we recently found the lost fob with the cut key in it.

[@DirkHagandTruth]

@@PhoenixHavenGarage Thank you, and thanks for the video, very helpful.

[@chriscounihan9151]

I'm on the fence about trying this for my 2021 GMC Sierra. My Key fob is acting up like the battery is dying and randomly saying "remote not detected" (replaced with a new battery) Dealer wants $250 to diagnose. Would you happen to know if re-programming my fob will solve my issue?

[@PhoenixHavenGarage]

Maybe the fob is faulty/failing? Do you have more than 1 fob? I would suggest getting a new fob so you have a 2nd one, then attempt to re-program. Make sure the truck is parked out of the way of things in-case re-programming fails. I do not know too much about troubleshooting the fob system. I only found instructions on how to re-program a fob and made a video covering it.

[@B.I.-EIO_macdonald9786]

Awesome! Does the remote start work? Or is there a separate procedure?

[@PhoenixHavenGarage]

It should work. I think on mine the doors need to be locked for it to work

[@tbaker9409]

I actually got stuck in programming mode the first time I tried this. The original fob would unlock and lock, start via remote, but not allow operation of the truck. Talk about stressful situation 😅 Not my vehicle either. Some where through the process, I had hit a button on the steering wheel. Got it out of this issue, and successfully programmed the original fob, but not an additional (it isn't exactly fob, but I believe it should work). Trying again 🙏🏽

[@PhoenixHavenGarage]

Glad to hear it got sorted out!

[@tbaker9409]

@@PhoenixHavenGarage On second attempt, the same results. First fob programmed, second didn't. This time the service theft deterrent warning came on! We tried to reset that via leaving battery disconnected for 15+ minutes without success. We managed to override the theft deterrent system by holding the key in the door lock, in the unlock position for 30 seconds. It then allowed the vehicle to start. The owner took the vehicle to a dealership and they quoted him $741 for 2 fobs! The service tech claimed the fobs are 1 use only, as in can only be "programmed once" LMAO! Service tech also told him by having fobs that aren't for the vehicle inside the vehicle while programming breaks the working fobs. Talk about a piece of work this person is. The owner of the vehicle is non-English speaking, and in my opinion, being taken advantage of by a greedy gm tech. Pretty certain GM service techs are financially motivated by labor hours from previous experience. While out of town, my wife was charged 11 hours labor to change 3 fuel injectors. On an LS3 engine. Amounts to 10-12 bolts and maybe replacing O-rings.

[@PhoenixHavenGarage]

@@tbaker9409 11 hours for fuel injectors on an LS? Nothing beats a trust worthy mechanic.

[@lucascritelli3339]

Can you tell me how you got out of programming mode I think I did the same thing and now I can’t do anything

[@DrewJenkins-hy7ei]

How did you fix the issue?

[@cappy208]

Having no luck with new remotes. Do the remotes have to be unlocked or turned on to program? The only thing the new remote will operate is the door locks. To turn on the engine I have to put the fob in the pocket. Any thoughts?

[@papabonez33]

Mine did the same thing, did you figure it out

[@cappy208]

@@papabonez33 I never got the remotes linked in the post to fully program. However. The original remotes reprogrammed fine using this method. The linked remotes only lock/unlocked and allowed to start. The tailgate remote never worked.

[@pitswhips3619]

My truck doesn’t have that little compartment in the center console for the key fob 2020 Silverado

[@PhoenixHavenGarage]

Check the seat compartment below the main armrest compartment as I show in the video. Otherwise I'm not sure where else it would be

[@Est3_85]

Thanks! Saved me $600 from the Stealership

[@PhoenixHavenGarage]

Yeah, F that! I'm glad you found this video and it worked

[@davidlawson9628]

I have a separate key .. No keyless remote. Will this still work? Also I don't have push button it a key switch. Will this still work by turning the key to push the button

[@PhoenixHavenGarage]

I do not know, but the website where I found the instructions to make this video has instructions for all of the different key options: www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y1v9cnbMKM-

[@gregcunningham3771]

I did this procedure and it seems that everything worked properly but now my remote start doesn't work on either key and it used to work on the original one. Curios if there was a cause of me doing something wrong or I should redo them both again.

[@PhoenixHavenGarage]

Did you buy new remotes that are the same? Make sure the doors are locked when you do the remote start.

[@adrianamendoza3095]

Does this also work for 2021 custom Silverado without a keyless start button

[@PhoenixHavenGarage]

This is where I found the instructions that I filmed. I think it had different instructions for multiple options on the vehicle. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YvZvcHbMKM9

[@kimmyp333]

Is there a way to do it for a non push start?

[@user-qi2ef4ut2o]

Glad to see it worked for many people. However, i have one working transmitter and just need to program the other. My new transmitter, fob, has the key cut. It works. I can lock and unlock with key. When i start the very first step, my dashboard does not display anything. Blank. I turn the key, counterclockwise 5 times. Nothing. I use both working transmitter key and non working transmitter key, the one I want to program. Should all doors be unlock, tailgate closed. Should i have my non working transmitter already in the slot to be programmed? Hold my breath? jump on one foot while barking like a dog?

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select instructions for your exact truck. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@user-qi2ef4ut2o]

Okay. Same link I used for the instructions. I remembered that my truck came from the great white north, so if I read correctly, these steps will not work, and I have to take my fob to a dealer.

[@travisdieringer3420]

My truck won’t go into remote learn pending after turning key 5 times. Any ideas?

[@PhoenixHavenGarage]

See if your truck's features have different instructions. These are the directions I used. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@germanestrada482]

Will this work on a 15 ‘ 2500 GMC Denali ?

[@omerh.2754]

great video but I 🤔🤔 i can't do on my 2022 because i do not have push buttons for engine start. any idea??

[@PhoenixHavenGarage]

They may have updated instructions for different truck options. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y-qT1-ROnkx

[@notayoutuberlol]

I have a 2021 Chevy Silverado 3500HD. I've turned the physical key counterclockwise 5 times but nothing happens. There's no message on the dash. Any idea what I might have missed?

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@gaelcampos3280]

I bought a 2019 Silverado at auction came with no keys would I be able to do this procedure if I start out having no previous fob?

[@cappy208]

You need the cut key. Copy VIN and go to dealer. They can cut a key. Need proof of ownership, license for them to cut for you. How are you starting it now?

[@anthonylan2295]

I program keys at the dealership, and I just want to say, "You took my job!" Baka daka dur, "You took his job"

[@mytube3687]

I have gmc sierra 2019 made in Canada doesn’t have a engine start button, does any body knows how copy the fob remote of this vehicle?

[@PhoenixHavenGarage]

This is where I found the instructions for my model. I think there are instructions for ones where an ignition key is required. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y0hF6nbMKM9

[@cappy208]

Seems the new remotes only lock/unlock. Wont do tailgate. And one remote starts. Other won’t. Can I start over and reprogram? Or is this a one shot programming per remote?

[@PhoenixHavenGarage]

You can do this as many times as you like.

[@papabonez33]

Mine did the same, did you figure it out

[@ascend7207]

Do you have both remotes inside the truck when this starts?

[@PhoenixHavenGarage]

It does not matter where the remotes are, you're clearing the memory in the truck's computer. You just need to place them in the programmer in the center console when it is time. They can be inside with you.

[@DaleOde]

Hey bud, did the steps and got the keys programmed but after the complete set up still says no key fob detected, we changed batteries in both remotes, any idea what else it could be?

[@PhoenixHavenGarage]

Hhmm, maybe it's something with the truck's electronics? These are both new fobs?

[@evilclowns5403]

Yes sir both new, we recently discovered a rodent of some kind has been chewing on the interior and thinking it chewed on some wiring as well. Probably why it's not reading the FOB in the holder on the bottom seat, I did everything you had on your video. Awesome info BTW. We'll have to take it to the shop and let them figure it out.

[@PhoenixHavenGarage]

@@evilclowns5403 Yea, good luck!

[@texasnative]

Do you have to press the brake when you push the start button?

[@PhoenixHavenGarage]

no

[@alexkovrik7879]

Hello, I have a 2015 Chevy Silverado 3500 HD. My key is programmed, but my remote is not. Is it possible to program it. I only have one remote for the truck…

[@PhoenixHavenGarage]

I don't understand, the key FOB is the remote.

[@pinkypusher5135]

I have a 2019 chevy high country, my trk dosen't have that slot in the console. Where would i put the fob to learn

[@PhoenixHavenGarage]

I think it is the square section of the cup holder in the center console. Place it face down in the middle section.

[@pinkypusher5135]

Worked, but the new fon dosen't work the remote st or tailgate

[@bakervinci163]

I had a fob go bad and not sure where I put it. I just purchased a new back up for 260, but they said I needed to come back and it would take 2 hours to program.

[@bakervinci163]

This is the 8th truck I have purchased from them.

[@PhoenixHavenGarage]

I would see if this works 1st. It has for a lot of viewers. It's a scam at the dealership to charge 2hr of labor.

[@JKCougar]

Hello I am trying to help my BIL he got a 2020 Sierra AT4 and only got 1 key with it. He has 2 new keys he wants to program. I am getting stuck on the first step though. I opened the door all the way and put the key in the door and turned it counterclockwise 5 times and the screen on the dash goes dead. It never goes into "learning" mode. I tried closing the door and opening it back up to see if anything changes but it just shows "engine time" never "learning" mode. Am I doing something wrong?

[@PhoenixHavenGarage]

This is the website with the instructions I used. This is the link to the 2020 sierra. good luck www.programautokeys.com/classified/2020-gmc-sierra-ignition-transponder-chip-key-programming-instructions-listing-9342.aspx#.ZDGMZHbMJPY

[@travisdieringer3420]

Same thing happening to me

[@dalevogt9242]

My old remote broke so I bought a new one. I have 2 keys, one for the remote that works, and one for the new. Followed the directions and the display showed every step completed. When I started the truck I used the remote that is still working. Everything worked. Then I tried the new remote. The lock feature worked but the truck wouldn't start. Then the display said place the remoted in the lower console cup. I did and the truck started. I took the remote out of the cup and the truck wouldn't start. What am I doing wrong?

[@PhoenixHavenGarage]

Check and make sure the instructions are the same for your year, make, model, and trim www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@spencerriddick1495]

Does this same procedure work on 2500 hd (diesel)?

[@PhoenixHavenGarage]

These are the instructions I used when filming the video. This is for a Silveraldo HD www.programautokeys.com/classified/2023-chevrolet-silverado-hd-ignition-fob-smart-chip-key-programming-instructions-listing-11329.aspx#.ZD2ys3bMJPY

[@EmpowereDad]

My 2020 silverado doesnt have engine start button and i dont have the compartment with the slot not sure how to program it.

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@ghostrider-gm2wg]

Will this work for a fob that doesn’t have a cut key? Or does the key have to be cut to program it? Thank you for your video by the way.

[@PhoenixHavenGarage]

@@ghostrider-gm2wg I think you need a key to start the process with the door lock

[@ghostrider-gm2wg]

@@PhoenixHavenGarage Yes, I have one original key they gave me. But I got one uncut key from Amazon. What I meant is, can I program the uncut key using the original key. Thank you for your response.

[@PhoenixHavenGarage]

@@ghostrider-gm2wg yes, you can reprogram as many FOBs as you want with 1 cut key.

[@ghostrider-gm2wg]

@@PhoenixHavenGarage Thank you for your help. Keep up the great vids

[@chrisfelker534]

Will this work for a 2022 Chevy Silverado 3500HD DRW?

[@PhoenixHavenGarage]

These are the instructions I used. You can select year, make, model, and options. I don't know if 2022 is listed, but the truck design has not changed really www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y5h-j4ZOnkx

[@fctinc1]

Will this work on a 2020 Chevy Suburban LS with a key No push to Start button ?

[@PhoenixHavenGarage]

These are the instructions I used. Just pick and look for your truck and options. www.programautokeys.com/classified/chevrolet-make-538.aspx

[@fctinc1]

I meant how to program the key fob remote not the actual key

[@rafaelarias9759]

Will this work for Colorado 2018? Thanks

[@PhoenixHavenGarage]

The link in the description to the instructions has an option to look up your truck. If not the same, it may be similar.

[@greggbabbitt6794]

How much was it to cut the new key from ebay? Thanx by the way! This will save me a ton of time and money!!!

[@PhoenixHavenGarage]

The key has to be cut at the dealer I think. The fob was like $30 I think.

[@lucascritelli3339]

When you’re waiting the 10 minutes where are your fobs? In or outside of the truck

[@PhoenixHavenGarage]

They do not need to be in the truck until you need to insert them into the programming slot in the center seat compartment.

[@chrisnunez5828]

Will it work on 2022 Silverado 1500 2.7 turbo 4cyl

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@scottheykoop4609]

Ok I have a good one for you. I remote started the truck on my way out of work. I opened the door as usual but I wanted to check a fuse situation under the hood. I didn’t get in the truck and pressed the brake and the button first. The truck shut off and said steering column lock. I disconnected the battery for a little bit and got rid of that but the fob wouldn’t work after that. I followed your instructions perfectly and both of them still don’t work. I don’t know what else to do.

[@scottheykoop4609]

Forgot to tell you it’s a 2021 Silverado crew cab LT 2wd with 5.3

[@PhoenixHavenGarage]

@@scottheykoop4609 Change the battery in one of the FOBs and try again? There might be different instructions for you year and options. These is the site with the instructions that I used for my 2019. It has different instructions for some years. www.programautokeys.com/classified/2001-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-7638.aspx

[@juegosgg241]

hi i'm trying to program my new remote on my gmc sierra 2019. i insert the key and do the time trial 5 times and nothing comes out on my screen.

[@PhoenixHavenGarage]

hhhmm. The link in the description has the instructions for multiple vehicles. I'll check it and see if I can find one for your truck

[@PhoenixHavenGarage]

www.programautokeys.com/classified/2019-gmc-sierra-ignition-transponder-smart-chip-key-programming-instructions-listing-9501.aspx#.YKrP4KhKiM8

[@PhoenixHavenGarage]

The instructions look different for GMC, but this should work. Good luck

[@juegosgg241]

I have already tried and it still does not work, because the first procedure with the key in the door but my screen does not respond, but well, thanks for the information.

[@JimmyGreen9]

@@juegosgg241 are you in Canada? Same issue and I don’t know for sure yet but I read on one comment that only vehicles in the US can do this… still searching

[@jamesstrider9926]

Hi I went through the process and I got my original fob and the new one to work but now it the unlock button on the outside door doesn't unlock.

[@PhoenixHavenGarage]

I would check google for that. Are you sure it worked before you reprogrammed the FOB? No one else has reported this.

[@jamesstrider9926]

Yes it worked before

[@Spahi77]

What of you do t have push button start?

[@PhoenixHavenGarage]

The link in the description allows you to see the instructions I used for this video and for other options, like needing the key to start.

[@bradmaunders1733]

Interesting is that I have a 2017 GM and it does not have a start button, rather has a key on the column.

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@radiantimmortal3400]

Is this the same process for a 21 Silverado?

[@PhoenixHavenGarage]

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

[@user-mn1nm3qw8v]

will this work on a 2022 rst?

[@PhoenixHavenGarage]

This is a link to the instructions I followed to make the video. You can see if it has directions for you make and model. kzbin.info?event=video_description&redir_token=QUFFLUhqa1FzMzMwQlZCMlRhOGt3UG5walBDcDF5a2s1QXxBQ3Jtc0tuVzhSOXZQNEx1WWRiaUhKUzRhRG9hRG14dVFZNU85MWZaVTNUU19aeW9malNUNE5EM0I1dWxFam5YZjFEZVBpVHpsemFKOGVVX21sZDV5OEpRRUZMdFpTUTN2RHZLdzQ0VzRLX1VRdDF4bUZBWFQ3SQ&q=https%3A%2F%2Fwww.programautokeys.com%2Fclassified%2F2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx%23.YIRH2pBKiUk&v=qjH3Uv-24rc

[@carlosramos1189]

17 silverado with no push start what are my alternatives?

[@PhoenixHavenGarage]

The instructions in the description have information on how to perform the pairing with other years of the truck and option like needing the key

[@carlosramos1189]

@@PhoenixHavenGarage description is kinda useless , only way to do this on a 2017 as of today is with a locksmith. Your video shows for different older model not multiple

[@JubileeValence]

Liked Subscribed Popping ice cold Coors (Dealership about $400) ---->No way in HELL

[@PhoenixHavenGarage]

I'm glad you found this video! Yeah, f that ($400)