Pajero 4x4 light blinking - understanding the codes and troubleshoot

Hello guys welcome to another video. In this one i show you how to enter in diagnose mode and understand the codes. in my cause it was related with the vacuum solenoids.
cheers

[@slumpgod8390]

It worked somehow 🎉I have an exam tomorrow and I am in vacation couple hundred km away from school . all the car fix around me is out of reservation thanks a lot

[@jeanloock4930]

Best way to prevent this issue of sticky/faulty vacuum solenoids is simply to exercise all the 4x4 controls regularly

[@steliogume8690]

Weldone Frank Perfect fault finding process

[@frankcumaio8328]

Appreciate it bro🙏🏻

[@TheShadowOfMike]

Great video brother, I envy your scrapyard of Pajeros damm.

[@PiranaTX]

Awesome job! Great video!

[@bunabuna9287]

Great work 👏

[@HeroicKhalid]

Great work

[@brandonc6980]

Hi Frank. Great videos. I have a problem with my Pajero. Can you help please?

[@yuranfelisberto6153]

Hi Frank, i am also from Maputo and i’m about to get a 2001 Pajero DID 3.2 but got alot to learn. Do you have any social media Where we can chat, please?

[@siasp9753]

Legend 🎉

[@areid1440]

You are correct about the obd2 My mk908 doesn't show anything for the 4wd I'm assuming that it's because it isn't a module controlled system...per say.

[@frankcumaio8328]

Yes exactly, but you can still check for errors. That procedure found in service manual. Thanks

[@areid1440]

@@frankcumaio8328 yes ground pin one on the dlc. I work by the service manual as well. Enjoying your videos

[@haikalabdullah226]

Tq bro your tuturiol very useful

[@frankcumaio8328]

Thanks

[@Rcguyankid]

My 2001 montero (pajero) limited does not go into any of the 4wd selections maybe this can be my same issue. I hope so.

[@Jddrivas]

Great video! 💪🏽💪🏽💪🏽💪🏽

[@jeffuy458]

How did you tool off the pin. I cant do it. I dont know how

[@r3concept801]

What is the symptom?my car same problem the middle light blinking.the car wont move..

[@thatoandyseth8879]

Great video man. I have 2009 3.8 v6 and super select just blinks at the center if i select anything other than 2wd. I'm going to start checking the upper solenoid 😅

[@horeamarinescu1016]

Did you find it? I have the same problem, but my solenoids both click and have good resistance.

[@sanober1518]

​@@horeamarinescu1016having issue yellow light blinking after speed up

[@horeamarinescu1016]

@sanober1518 mine blinks permanently, however while the engine is running if I put in any 4wd mode, the light keeps blinking, if I switch engine off and put the canlr in 4llc or 4hlc and I start again, it works fine, if I change to 4h or 2h the diff light starts blinking again.

[@sanober1518]

@@horeamarinescu1016 yes the same happen with me ..if m over speed it blinks yellow one and once I turn off the car and restart it's fine ..do u show it to anybody..is it normal or big issue..plz let me know

[@horeamarinescu1016]

Mine just blinks.

[@grandseignejean4448]

cool

[@brandongoberdhan6335]

Really informative video. Where are you from? You guys have a junk yard pajero heaven lol also your pajero looks really good

[@frankcumaio8328]

Appreciate it bro. I’m from Mozambique, hahaha yes we do

[@brandongoberdhan6335]

@@frankcumaio8328 awesome bro but where is that country?

[@frankcumaio8328]

@@brandongoberdhan6335 its located in Southern Africa,My city borders with south africa

[@acptecnology3006]

eu tbm sou muito fa pajero,estou a pensar compra um,abracos

[@user-xx9rx8ri3c]

Hey man nice video. I did the procedure and my center diff light is constantly blinking. Also my abs light too. What does this mean?

[@francisguchie1973]

Hello, If you have ABS lights on all the time, please look at your ABS sensors. Most likely one of them at least is dead and sending the signal to the ECU. Once fixed all will be fine. But before you do this make sure that your break fluids are at optimal levels and your break pads are all good. Low levels of the the break fluid could trigger error codes too

[@francisguchie1973]

Thank you Frank. does your Mitsubishi Pajero have a 4m41 engine? I have seen forums complaining about grounding cars of after 2000. I have a gen 3 Pajero with a 3.2L DiD 4M41 Engine.

[@frankcumaio8328]

Welcome Francis. Mine has 6G75 engine, the early 4m41 non common rail were the ones prone to failure. The fuel pump fails

[@frankcumaio8328]

But the one on the video has 6G72, the one that i own now is the one with 6G75

[@francisguchie1973]

@@frankcumaio8328 thank you for this response. Mine is a 2003 gen 3 pajero. It has in it a 4m41 engine, 220k on the odometer. the fuel injection pump is a Zexel vrz pump. It cranks for 5 seconds before starting. When engine is till below running temperatures the RPMs are 750. Once it warms up, when i engage it to load, the rpms drop to between 650 and 700. And then after a short will it will stall. Starting it warm or cold takes it 5 or more seconds to start

[@williamshadd3755]

I was wondering is this salvage yard still around for Mitsubishi Montero

[@frankcumaio8328]

yes in Mozambique

[@user-hs6pu9tl8q]

👍👍👍👍👍👍 ‏‪

[@Fireneedsair]

So are there two vacuum solenoids, one under the air filter and the one with the actuator?

[@frankcumaio8328]

You have two solenoids under the air filter and one actuator at the bottom near the front diff that engages it

[@orlanmedina3693]

@@frankcumaio8328 i thoutht the one by the actuator was a switch to tell the computer if the front diff is engaged or not

[@frankcumaio8328]

@@orlanmedina3693 I taught he was mentioning as a vaccum solenoid. But yes we have one switch for the position near the actuator. It has two wires

[@youssefahmed8245]

where is the a/t switch on this mode?

[@Mrveescuba]

i did the same but the ligth still on any idea??before i go for swiches?

[@frankcumaio8328]

Can you check if you dont have any wiring around the gearbox switches cut? Which code you got

[@Mrveescuba]

@@frankcumaio8328 transfer line sw2

[@maciek5807]

Hi, could you shate the list of errors?

[@vandportsupremesportsaxis8318]

Hey that's great, how do i reach you Frank?

[@frankcumaio8328]

hi. Email me at [e-mail] will give you other details

[@rahmatsamsuri]

I have a blinking front wheels when engaged in 2H. Do you know why?

[@frankcumaio8328]

diagnose it brother. the codes will help to understand whats messing up

[@yugathisnarayanasamy1553]

​@@frankcumaio8328Code 35 what does it mean?

[@pierogillio]

I got the same code but both selenoids are working, vaccum actuator works fine, no idea what could be

[@frankcumaio8328]

Hi Mauro. Check the solenoids in the transfer case could be those. Also check for the codes do you have them?

[@pierogillio]

@@frankcumaio8328 4x4 system is working fine when vehicle is in the on posición but engine not starting, then start the engine and from 4H to 4Llc works fine, then put back in 2H and center lock light start blinking. Code is 34

[@horeamarinescu1016]

What did you find to be the problem? I have the same problem, both solenoids are fine and I get error code 33

[@kwadwootopah-poakwa8450]

I am not able to select the 2H of my 2002 Mistubishi Montero. All the others work but it cant get to the 2H Please ut

[@aronnr]

Is this scrap yard in Maputo? I need to get a solenoid/actuator for my 1989 Pajero. Please give the address. Thanks.

[@frankcumaio8328]

Yes in Zimpeto, 1a rotunda da cicular. [phone] Magaia

[@aronnr]

@@frankcumaio8328 Thanks. May you send the google maps location? I usually stay in Maputo city and don’t know much about Zimpeto.

[@frankcumaio8328]

@@aronnr Dropped pin maps.app.goo.gl/6URdTJDbA774Lr619?g_st=ic

[@Minxrmusic]

I need some help with my pajero, idk if you’ll see this comment but how can I reach out to you to help diagnose this issue

[@frankcumaio8328]

You can reach me out via WhatsApp [phone]

[@dronepilot1333]

Mine has had no illuminated lights whether 4WD is engaged or not. How to fix it ?

[@frankcumaio8328]

Check the dash bulbs. They might be burnt

[@dronepilot1333]

@@frankcumaio8328 I checked. Fuse was burnt..

[@TJ.Outdoor]

A lot of pajeros in the scrapYard, where are you from, Here they are rareeeee

[@frankcumaio8328]

Hahahahah we have a lot because of the failure on the High pressure fuel pump. Im from Mozambique

[@TJ.Outdoor]

@@frankcumaio8328 Mine to, so i change the engine with 2.8 head and mechanic fuel pump, and working as charm

[@maxabedian4461]

Hi Frank I liked your video and I have problems with my 2006 Pajero full diesel can you please help me

[@frankcumaio8328]

@@maxabedian4461 HI Max, thank you so much. Yes sure can help you out. Which problems are you having?

[@rodneyhamson2239]

check fuses under the dash i found a blown 10 amp blown replaced it and all good

[@horeamarinescu1016]

Which fuse was it?

[@boazessiakoh8330]

Where is the solenoid located in the engine

[@yusufsalih9849]

On the right side of the air filter informer of your headlights (right side)

[@samngigi8780]

You are good. Check out if Will Smith is your brother.😅😅

[@frankcumaio8328]

😂😂😂😂😂 hahahhahahha man

[@hishamshitokai]

Sorry , How can I can contact you?

[@frankcumaio8328]

Hi bro. Whatsapp its fine [phone]