Panasonic vs P-50 & siren death

[@traintraveler5413]

i love how the mic just goes from earrape to mere echo and then people screaming "OH FUCK!" in under a second

[@McCspeed565]

You mean they were saying “AWW FAAWWWK”

[@PossessedAiden_Official]

4:01 P50: ima bust (explode) Worker: Dont you dare- P50: *explodes* Worker: Shit

[@Golddoubloonsirens]

Generator to siren: "You're chopped liver!" Siren to generator: "You're blowing smoke!"

[@IllisconsinSirens]

I love the initial realization at the end that this is never sounding again

[@wigwagstudios2474]

it's a shame too when you realize probably no one is going to go through the effort to build a new rotor because A. metal = expensive and B. BIG rotor size

[@zachzebra56]

​@@wigwagstudios2474unless they could find one from a parts P-50 but the only parts P-50 I know of is the former state fair park siren with the fried motor in ASC's yard. Even then, that would be super hard to do so cause you would essentially have to buy that siren from ASC. Assuming they are willing to sell it for parts.

[@JointedStudios]

@@wigwagstudios2474You cant just replace it for a new one. The entire thing is done for.

[@wigwagstudios2474]

That is mostly what I already said, but yeah... Minus one functioning P-50.

[@firealarmexpert25]

Welp there goes my towns P-50

[@MichanaAlerting]

So sorry man

[@zachzebra56]

Amazing how the mic managed to survive a whopping 250+ decibels but the siren didn't. RIP.

[@SirenDude1003]

The camera was receiving roughly 160 dBs of sound, i’ll be editing the description in a minute or two with details on what caused the failure.

[@zachzebra56]

@@SirenDude1003 still amazing.

[@SirensAndAlarmsOfNorthernIL]

@@SirenDude1003Nah prb more than that, as that was how loud Frankie’s P-10 was up close. That was around prb 175-185dB

[@rainbowrailroadcrossing7798]

@@SirensAndAlarmsOfNorthernIL185db is still an insane level that can knock anyone out.

[@SirensAndAlarmsOfNorthernIL]

@@rainbowrailroadcrossing7798 eh prb won’t be enough to knock you out, as for example, that’s about the noise level aircraft maintenance personnel are exposed to when they’re literally sitting under a fighter jet as they test the engine on the ground at full afterburner, and I mean, they handle it well (with hearing protection ofc) although it is prb a bit less as 185dB is like being 500-1000 feet away from a rocket taking off

[@starfox1326]

phill swift here now! that's ! a lot of damage!

[@wingochan9400]

I have never seen a P-50 do that before. 😧

[@wingochan9400]

But damn, that siren can scream! Good thing you all were wearing hearing protection. 🎧

[@polandball7482]

@wingochan9400 Before the sirens rotator failed and later the siren sucked some fiberglass from the horn and blew up the chopper and stator got cracked and destroyed it will need a new stator and chopper and rotator

[@ILoveViaLRC]

Oh so that's why it sound low

[@polandball7482]

@@ILoveViaLRC no it’s sucked the fiber glass later In the video but it looks like it has done it before so I’m guessing

[@polandball7482]

@fs_sd-10 i know

[@BotvacProductions469]

4:10 "WHAT THE FUCK" "OOOOHHHH SHIT" 🤣🤣🤣🤣🤣🤣🤣

[@SeamusYap]

The chaos is crazy

[@Nthuziast]

i have to imagine thats pretty fckin scary to see a thing weighing probably over 1000 pounds suddenly jolt like that

[@SirenDude1003]

It was quite scary.

[@samuel-is-a-rebel2007]

an asc t-128 is 1320 lbs. and the aca p50 is 2 times bigger so probably 2000+ lbs.

[@siren_stuff]

4:01 the siren's chopper broke

[@Blinx7139]

It cracked

[@thuoneban]

I wonder what's inside it why it's making such a loud noise

[@ilovebusesandtrains7777]

Yo that P50 said I’m bouta blow 4:01

[@MaisenVo030]

Your wrong its :4200

[@ilovebusesandtrains7777]

@@MaisenVo030who ASKED??

[@gabriellealonzo7769]

1:02 its working😮

[@Zoey474_official]

4:01 workers: cussing me: well what did you expect p-50 explode

[@melsanity.mp4]

Salute to the P50, you were a real one.

[@TheDrJ2006]

The reason why the ACA P50 sounds a little higher than usual sometimes is because the generator had to work way harder to operate this high power siren!

[@SirenRecordingsofIowa]

I'm genuinely curious after 5-6 months how did they not notice the pops when the chopper was tested?

[@blurplemurple4960]

bro that thing got the worlds fastest chopper brake

[@zachzebra56]

Stopping a 80 pound at least chopper spinning at 3450 RPM in a blink of an eye? That's more impressive then Sawstop! I present to you all, Sirenstop! Patent pending.

[@therailcat9790]

Pretty sure everyone knows now but the chopper cracked in half

[@blurplemurple4960]

@@therailcat9790 i know

[@SockyNoob]

​@@therailcat9790 insane that's even possible, especially considering how huge a P50 chopper is.

[@Ryzohm0141]

@@zachzebra56 It is because the chopper physically snapped in half

[@Creeperboy099]

So the motor literally has enough instantaneous torque to break the chopper?

[@Toothlessnigthfuryfan]

me: a oh that's not go siren: what me: your on fire siren: oh shit me: don't explode siren: sneeze.s me: me oh oh oh siren: a cho expoldes me: oh shit that's not good.

[@angels_gaming8309]

Im curious to see what actually happened, and what it looked like when it went.

[@locklahnplayz5753]

Why did the p-50 have weird holes?

[@Airplane432]

because it was very old

[@hunterneitzel3012]

​​@@Airplane432this p50 took quite a beating in a storm 10 years ago, and around 2 months before sirencon 2024, a piece of the broken projector got sucked into the chopper and cracked it, that's why the siren was taken off the pole and replaced, and when sirencon 2024 kicked off, the chopper finally fractured from the high rpm, the gradual bump start, and fatigue. The chopper then friction welded itself to the stator, frying the motor in the process. The reason for the bump start was because they were worried that the high load from the chopper motor on the generator would cause it to fail prematurely, they took the same precaution the previous year with ASC's stored cyclone 125, which uses the same motor and chopper as the p50

[@Zkhaazzk]

I know theres the problem why P-50 siren stops wailing because theres the crack

[@bentheidioticnerd8993]

I know this might be a stupid question, but is there a way to 3D print a new chopper?

[@MrBallsAgain]

No… this thing is done for 3D printing won’t do anything especially since it’s metal and big

[@zachzebra56]

Probably not. Because your gonna need a freaking big 3D printer to print something that size. For one. And two, the plastic or whatever the printing material is called would likely shatter and self destruct from running at that speed.

[@bentheidioticnerd8993]

@@zachzebra56 I think 3D printers can also produce things made of metal too.

[@zachzebra56]

@@bentheidioticnerd8993 Really? Never heard of that before.

[@BLANK-tl]

i dont think a 2 feet IN DIAMETER piece of plastic is gonna survive being spun around 60 TIMES PER SECOND in a slightly bigger piece of metal in a 1000+ pounds big-ass metal bucket

[@MelvinDeguzman-i2q]

4:01 P-50 siren said bye bye

[@notsurehowloudthiscanget6103]

That's a rough way to go :( At least now I know what sound is left after a siren suddenly cuts out, and with one of the beefiest electric ones at that! So who wants a repair and restoration project now? Gonna need $$$ that's certain!

[@petjuska211]

RIP P-50 & siren.

[@Brudy-X6r]

In TSM p-50 was crapping in allertor and calling him a big toilet and also, calling modulator mentos when he got in jail with him so that's how p-50 deserves it for bullying other sirens

[@gagethedeerkiller]

What caused that to happen?

[@SirenDude1003]

@@gagethedeerkiller small crack in the chopper that went unnoticed. The centrifugal force and the stress from bumping it on and off constantly caused it to expand and finally split the chopper in half. Considering the chopper was moving at nearly full speed it welded itself to the stator from the heat of the friction caused by the sheer speed of the chopper grinding against it.

[@polygoned_cheese]

Damn that bucket has a nice Cyclone 125!

[@zachzebra56]

Actually, it's the chopper of a cyclone 120 running on a 125 motor. You were close though.

[@polygoned_cheese]

@@zachzebra56 wouldn't put my finger in the port hole chopper whilst it's spinning

[@zachzebra56]

@@polygoned_cheese me neither! One video shows a guy with an STH-10 and he pushes a stick into the chopper while it's spinning very slowly and it chopped the stick. They don't call em choppers for nothing!

[@polygoned_cheese]

@@zachzebra56 same horsepower as my motorcycle cuz it's 15 hp motor too btw

[@zachzebra56]

@@polygoned_cheese Actually, P-50's are 50 horsepower. The horsepower your bikes engine is equivalent to a P-15 which is a 15HP siren. The penetrator sirens are modeled by their motors horsepower. I.e. P-10= 10HP P-50= 50HP etc.

[@NachelleGordon-v1e]

0:16 sounds like a beat

[@SockyNoob]

To be fair, it didn't look particularly healthy to begin with. Still nuts that 2 foot chopper can somehow snap itself in half.

[@saeedharib5902]

h What happened to the p-50

[@MaryFoster1799]

Why is the siren spinning opposite direction

[@josephfrye7342]

well, Panasonic survived but that siren of P-50 is dead and done. They are gone, mate.

[@Iamthegreatmightypoo12]

How can a bucket be this loud

[@TSSSH-2013]

Anyone notice the smoke-ish comin' from around the rotator?

[@metra1383]

did P-50 Siren got fixed yet?

[@SirenDude1003]

@@metra1383 its not getting fixed

[@metra1383]

@@SirenDude1003 That’s just so sad 😞

[@TOXICTHEPROTOGENWX]

It ate its self that is what killed it

[@TOXICTHEPROTOGENWX]

Then the fiber glass loged itself into the motor seasing it and killing the motor

[@SirenDude1003]

@@TOXICTHEPROTOGENWX that wasnt what caused it this time. The chopper cracked and split in half during operation.

[@tonitighe4008]

Sadly the rotator motor’s gone

[@JDawg_J]

That was so cool until it broke 😂

[@carstrainsandcrossings8639]

That siren is already in rough shape what happened to it?

[@MartinGamer6241]

It was very old i think

[@carstrainsandcrossings8639]

@@MartinGamer6241 ik but like how did it get all that damage

[@VictorMihailov-hw5lb]

Aca p-50: AHHHHHHHHHHHH oof💀 Sirencon2024: WHAT THE F*CK😳

[@RandomDogLola1969]

whose P50 was it?

[@Natasha-qg7tk]

What broke???

[@RafaelRoine]

YEAH

[@Airplane432]

the fan

[@christopherlynch9092]

The chopper went out

[@thespiritstingray9359]

The thing really wasn't having it today was it...

[@sirenealertedu1ermercredid256]

RIP 🪦 4:01

[@New-England-sirens-productions]

This is just a rotational cyclone siren

[@Charliedavis14744]

3:26 Smw bowser final boss intro ahh siren 💀💀💀

[@saganelkins]

from the troble to the broken rotater to the chopper killing the siren

[@codyrapp7253]

Did the chopper blow up?

[@minnesotaoutdoorwarningsirens]

no but it cracked

[@codyrapp7253]

@@minnesotaoutdoorwarningsirens wow. I guess you can say he no longer speaks.

[@cannon4337]

ERRRRRCHA

[@damntheman2]

from what i heard fiberglass was sucked into the chopper! ouch!! EDIT: A crack in the stator apparently caused it.

[@awesomegaming8617]

I'm honestly surprised the GENERATOR didn't explode first!!

[@TheTechWizardOP]

I think the Problem Here was that the Chopper welded it self to the rotor Because of heat (Friction) I never heared a P-50 Go high like that so Maybe the Overvoltage you put on it Caused the Chopper To spin as Fast that it Welded it self Thus Locking the Chopper Because a Normal Penetrator 50 Uses a Brush Type While T-135 Type P-50 Uses Some else.

[@MedicoreSirens-r8x]

Not the Case Did you Read the Description?

[@spanishFriedEggsOnYoutube]

What’s going to happen to this P-50?

[@benjaminbrown3939]

Prolly gonna be melted down and made into a T-128.

[@benjaminbrown3939]

@Alwaysdoinit112 unfortunately it's toast

[@MaryFoster1799]

I think this possible to replace by going to a tornado siren junkyard and find a p50 and get that chopper and put it on the this siren that cracked making a replacement

[@MaryFoster1799]

@Alwaysdoinit112those things are trash

[@ACAPenetrator50]

Oh my god 😯

[@Ilovephilippine_421]

R.I.P headphone user

[@lorwinad1]

What happened to the siren?

[@benjaminbrown3939]

Blew up

[@Khione3]

0:52 epic gamer villain charging up their super cool attack that will (may or may not) destory half ot the solar system

[@aliciaamerson7658]

It broke at sirencon 2024

[@SpongeBob-h7o]

This siren p-50 4:00

[@A38n_]

Pee-50 is crying:

[@jisso_fantasticfantasticalt]

pee bucket

[@jellyjuniorgt]

the first few sounds sound like downshifting but backwards

[@edmilsondosanjos5812]

me before i see a monster at the nigthmare:

[@ecccwxrdomsimaoandmore3653]

rip p-50

[@sirensofminnesota8610]

it sucks that i missed the p-50 but i had to leave

[@tonitighe4008]

Me neither, i’ve also never seen a p50 sputter

[@VonnaWasser]

LOL imagine actually owning an P-50

[@dandidoo1393]

🧢

[@VonnaWasser]

@@dandidoo1393 but then again if it was borrowed from ACA Sirencon would've have been sued by now with an article

[@blockstacker5614]

@@VonnaWasser ACA went bankrupt in 1992 and subsequently reformed as American Signal Corporation.

[@Godzilla20191]

This P50 was taken down and the people at siren con decided to use this P50

[@FanKid4774]

4:02 🫡

[@MrBigMac9647]

P-50 fiasco 2.0

[@Null_filename2-p9b]

How did this happen?!?!?! 💀💀💀

[@AschTheWolf]

This is your fault P-50, and the rotor was seen in videos (strangely not this one) to be smoking the whole time it was running before death

[@Null_filename2-p9b]

@@AschTheWolf Are you accusing me? 😠

[@thespiritstingray9359]

​@acap5084 for all that is good and holy don't start roleplaying It was an accident. Nobody did it intentionally.

[@Null_filename2-p9b]

@@thespiritstingray9359 Exactly! Thank you! I wasn't in the mood to get accused.

[@thespiritstingray9359]

@chocosterling6225 And? Dude didn't go out of his way to render a siren permanently inoperable!

[@borkluchtalarm]

Loud bucket dead, Panasonic won.

[@Y0ur4ng3ll]

0:59 my ears😍

[@AbdelaliReghai]

SIREN IS BAD AND MAD ATTACK THAT HARD

[@WingsandBlades257]

Rip noisy bucket ):

[@Ryzohm0141]

Under pitch, kind of dying

[@ACA_Allertor]

*8/12 port siren death intensifies*

[@obaidalshurafa6386]

The the chopper explode😮

[@ILLINOISSIRENFAN]

Rip to that microphone

[@zachzebra56]

135 Db's at a 100 feet. That's 100 feet! Now imagine you right next to the thing without hearing protection. I can imagine anything above 250 to 300 Db's! This thing could actually kill you if you were up close without hearing protection.

[@JavierXOS]

Dalamnya ada dinamo yang besar jadi bisa motor itu yang untuk suara

[@S3arou]

Rhe p50s chopper got fried also it was old how ik i was there even though im a 8 year old

[@Sub_to_LUCAS_ZHUK_on_youtube]

3:29 bro kinda made a fire beat. Just crazy how the rotor went from almost full speed to stop dead in its tracks My dam ears are bleeding

[@Toyozah_OG]

Go home siren, you are broken 😢

[@RafaelRoine]

WHAT DO YOU MEAN

[@Amberbeth5]

😢 i love p-50 but is broken

[@RockySom-rz7yy]

THAT WAS SO LOUD

[@BLANK-tl]

180+ db

[@trainsandsirensofilinmiwi2080]

@@BLANK-tl 135

[@lidiamendez4961]

So loud😢

[@Agridu45]

4:01 p50 Explodes

[@Kil0byte.420_fr]

Baofeng radio spotted 😎

[@AprilOake]

Brooooooooooo nooooo😢

[@CallistoBetch]

4:00

[@vioz-xv1mw]

Nyig nyiing nyiiing nyiiiiiiiiiinggg!!! 😂😂

[@AbdelaliReghai]

The Aphmau Is hell and running too fasterIs a Speed 😻😽

[@AbdelaliReghai]

EXTREMELY HELL

[@AbdelaliReghai]

EXTREMELY HELL

[@AbdelaliReghai]

TOO FAST

[@AbdelaliReghai]

YOU SPEED

[@AbdelaliReghai]

EASY

[@alexboxall18]

Wow

[@steveperelli3602]

Rip siern

[@finny1548]

rip p50

[@jerryvalencia8498]

What the sigma us broken

[@AddenIsaiah]

The P-50 will be explode

[@ShondaBush]

MY EARS 1:08

[@michaeljuanmarkes6595]

Tester siren tornado 👍

[@AddenIsaiah]

We'll be explode

[@naxoleiva]

Acá p-50👌👌🫡🫡

[@tonitighe4008]

This sounds absolute garbage