Panelling The Stairs. Super Easy Guide. How To work out the angles! Wall step-by-step guide DIY hack

[@chrislupton7521]

My wife and I cannot begin to express our gratitude for this video. You saved our marriage. Jokes aside, our combined lack of mathematical finesse led to a couple of significantly incorrect cuts, but stumbling upon this video - you definitely saved the day!

[@kirstygriffiths749]

Oh wow ! So glad I could help 🙏

[@Clarewar22]

Omg I’ve been stressing about figuring out these angles for weeks! This is literally the most helpful video I’ve seen 👍🏻

[@kirstygriffiths749]

Thank you. Glad it was helpful.

[@kirstydavidson1982]

My head is burst trying to figure out those angles!! 🙈 your video is so good with clear instructions and showing every part of the process, thank you so much.

[@kirstygriffiths749]

Glad it was helpful!

[@Jess-zv4vf]

Thank you for this video. Good clear instructions. I managed to get the correct angles by following your instructions. Other youtube videos are so complicated, but yours are easy, and you only need a tape measure & spirit level. 🎉🎉

[@kirstygriffiths749]

So pleased it was helpful 🙏

[@kevinguyatt9128]

very helpful video makes it look so simple

[@rachaeltucker7212]

Your bloody brilliant!

[@louisea3867]

Super helpful video, thank you!

[@danyoung06]

This was a lot of help. Thankyou! Although your low battery smoke alarm kept making me think it was mine! Haha

[@kirstygriffiths749]

Glad it helped! I've now removed it !

[@cheryl9162]

Thank you Kristy!!! This is very helpful!😊

[@kirstygriffiths749]

Pleasure !

[@philhode5104]

What make of paint did you use,I need 1 that paints wood and wall same colour

[@kerryoverton4486]

Been waiting for a vid like this !! Thank you 🙏🏼

[@kirstygriffiths749]

Glad it was helpful

[@lisahibbert-n7i]

love this video, thankyou!

[@habiburrahman-nf9ei]

great work!

[@roksolanakohaykevych9975]

Thank you for your video Kirsty. Actually after many calculations I end up doing exactly the same way you showing here.

[@kirstygriffiths749]

Glad it was helpful!

[@caz3949]

Very well explained thank you looks great

[@kirstygriffiths749]

Thank you

[@deanfisher368]

Very helpful

[@kirstygriffiths749]

Great to hear 👂 👌

[@pondenmillweddingsyorkshir6267]

Such a helpful video thank you for sharing. I’m just doing my panelling now and thought I was going to have to buy some fancy angle finder. So happy I don’t 😂

[@kirstygriffiths749]

Glad it was helpful!

[@johnmcmullan4619]

made so easy . pat on the back

[@scottrichards4419]

Outrageously simple... could you do a video on 'How to solve the waiting times in hospitals'?' Cheers

[@kirstygriffiths749]

😂😂😂😂

[@anastasiakeriazes1893]

Great paneling!! How thick are those strips ?

[@ericas1727]

Hi Kirsty, none of the links for the mouldings, dado rail or paint seem to be working.

[@shanthiasivakumar7731]

Hi Where are the dado rails from, the link on the description is no longer active 😢

[@ChloeMcc-hn4sc]

Hi great video, can I ask how did you measure the length of the stairs seen videos saying you should do it in a straight line across rather than following the slant of the stairs? Any help would be appreciated ❤

[@kirstygriffiths749]

I measured the slant of the stairs. Then I used my template sitting on it. Check out my other panelling video, what I’m saying will make more sense.

[@wendybarney4337]

Hi this is very helpful thank you can say roughly how many panelling strips you brought

[@kirstygriffiths749]

For the stairs part I think it was 8?

[@tospicy4ya]

I’ve got to do dado up stairs and then a 90 degree corner still runing up ? Any ideas on how to get the perfect cut ?

[@mpo3565]

Thank you for the extensive video ! Can I ask why didnt you cope the internal joins rather cutting it at 45 degree angles? Seen alot of videos that reccomend this instead of the method you used !

[@kirstygriffiths749]

They are not all cut to 45 degrees? This is the way I do it. Easy

[@mpo3565]

​@@kirstygriffiths749They are 45 degrees, you also say this at 2mins 20. This isn't critical by the way I was just wondering ad I'm going to try do this also. Yours is the clearest video I have come across so thank you !

[@anthonyweaver6082]

I still don't get the angle up the stairs, i must have watched this video 20 times and I'm still getting a gap between the straight piece and angled piece I'm not sure what I'm doing wrong 😢

[@TheChooken83]

What filler do you use on your walls, I have brick walls with cement plaster over top and there are so many imperfections it’s so aggravating also a lot of the original paint is peeling so want to skim fill those areas so I don’t have to peel every single wall back

[@dangerscouser]

How did u cut the acute angles on moldings

[@kirstygriffiths749]

I’d suggest watching my video 👍

[@DarrellSCady]

Do they not sell angle finders in the UK?

[@kirstygriffiths749]

Yes. My method you don’t need one.

[@garyfalliastrati9023]

Did you paint the wall once you placed the panelling right?

[@kirstygriffiths749]

🤪 Na! Thought I’d leave it for a laugh 😂

[@garyfalliastrati9023]

@@kirstygriffiths749 I mean that you paint the wall once you placed but what would be advisable before or after …

[@yolandarnathaniel9889]

I didn’t see the information on the lights

[@kirstygriffiths749]

Link is in the description

[@yolandarnathaniel9889]

@@kirstygriffiths749 I don’t see the link, will you give it to me?

[@MrGordie9]

Cutting angles is much like a marriage… it’s 50/50 meet in the middle.

[@MJ-yp8qu]

🥰⚡️⚡️👌