How to Make a Faceplate & Adjustable Chuck

In this video I’m going to show you how I made these accessories for the lathe. I made a faceplate and a adjustable chuck to turn bowls.
Note: The self centering "Longworth chuck" was named after its inventor. Since this chuck is not self centering, adjustable chuck would be a more appropiated term...
Blog Article: bit.ly/2JkI7fw
Lathe Faceplate & Chuck Plans: bit.ly/33mG2a6
Lathe & Disc Sander Plans: bit.ly/3fFh1fa
Lathe & Disc Sander Playlist: bit.ly/3NvPU5S
Where to get some materials and tools used in this project:
Modular Workbech Plans: bit.ly/2V1VzaS
X-Motion DIY Portable Mortiser Plans: bit.ly/3fT7lQE
Band Saw Plans: bit.ly/2JisRjf
T-shirts and Stickers: bit.ly/2RMYDET
Follow:
/ paosonwoodwork
/ paoson_woodworking
/ paoson_woodworking
#woodworking #homemade #diy #faceplate #lathe

[@Paoson_Woodworking]

Lathe Faceplate & Chuck Plans: bit.ly/33mG2a6 Lathe & Disc Sander Plans: bit.ly/3fFh1fa

[@SAHBfan]

This video has convinced me I need to come up with some sort of overhead router device - so much easier when you can see what you are doing!

[@leksey7870]

The structure, well done. Like!

[@Paoson_Woodworking]

thanks!

[@ruiluo7934]

Your every episode video I can see, is very good.

[@Paoson_Woodworking]

thanks!

[@BlackBeardProjects]

Oh! I'm super excited for the next video! Awesome work as always.

[@Paoson_Woodworking]

thanks!

[@forestlampcraft472]

YOU AS ALWAYS well DONE!

[@Paoson_Woodworking]

thanks!

[@buddyhutchins3782]

Your homemade equipment impresses me. Nice shop.

[@hugobose2254]

Looks Great Paoson

[@Paoson_Woodworking]

thanks!

[@craigmonteforte1478]

Nice work that router set up is pretty cool too

[@JamesCouch777]

Very slick 👌

[@blackfender100]

Nice Job bud.

[@froilansantos6259]

"......Very impressive design Señor Suso.... Looking forward to the next episode....!"

[@Paoson_Woodworking]

thanks Froilan!

[@AlfFisher]

Как всегда - интересное видео :). - - Сусо, вы по-прежнему использовать соединение *дерево/металл* 1:55. Но эта связь *НЕ быть надежным*, и во время работы будет шататься. Почему бы не взять длинную железную гайку (резьбовой разъем), разрезать его вдоль и немного отжимают в тиски (для плотной посадки на резьбе. Затем приклеить гайку в деревянной шайбой, с помощью эпоксидной смолы. - - Почему бы не использовать винты вместо обычных 4:30 - "крыло" (барашком) Это так удобно Марк?.

[@Paoson_Woodworking]

I was actually surprise by how well this metal/wood bond works. If you use a hard plywood such as birch, the bond is strong and sturdy, too. Still, a long nut would work just as well. Using wing nuts is a good idea, it´s just that I didn't have any spares in my workshop!

[@AlfFisher]

The initial connection is strong. But gradually, with each time the connection is a little loose (especially considering the heavy workload on the faceplate). Positioning "threaded" is not very good. Much better to use a "smooth landing". - wing nut, you can do it yourself - combining conventional nut and body of plywood.

[@BrassLock]

Very interesting video. In your description you have correctly identified (in the links attached), some examples of the chuck that was invented by the late Australian wood turner Mr Longworth. As noted, it is a self-centering chuck, and if a chuck does not have the contra-rotating plates, associated spiral slots (with inserted sliding grips), then it isn't self centering, and consequently is not a Longworth chuck.

[@Paoson_Woodworking]

I didn't know about that, it's my first time experimenting with the lathe... I'll change the description and update the article on my website with this information, thank you so much!

[@BrassLock]

+Paoson WoodWorking : I was a bit reluctant to make my comment, and I see you've changed the description, and we have both learned something about how the world is self-regulating when we have good intentions ☺. Thanks for your reply.

[@Paoson_Woodworking]

done! thanks again...

[@BrassLock]

Paoson WoodWorking That was fast! I've updated this end too.

[@FAHEEMKHAN-xq6is]

i am waiting for next vedio.... i like wood working..

[@Paoson_Woodworking]

thanks!

[@DonJohn87_YT]

Really enjoy your videos! Next project: a Longworth Chuck? ;)

[@Paoson_Woodworking]

Well ... it seems to be my destiny! :D

[@ScrapwoodCity]

Nice!

[@Paoson_Woodworking]

thanks as always!

[@aleandrsworkshop381]

Useful, thanks!

[@Paoson_Woodworking]

thanks!

[@gordonthorpe17]

I made this adjustable faceplate after watching your video "I thought it was a good idea" because I don't have a chuck for my Lathe, the thing is when I put a bowl into it to turn the base off it Jumps out of the faceplate when i start to take wood off the bowl, "I make sure that it is tight in the faceplate" but still it jumps out every time

[@Paoson_Woodworking]

hello Gordon, it works for me! Do you have conical silent blocks? You can also use double-sided tape to reinforce the grip. Send me some pics please.

[@gordonthorpe17]

Yes I do have the conical silent blocks, they do compress & belly out when tightened up,, it took me 2 weeks to find them, I did think of only putting 6 on it but eventually decided on putting 8 on it as you did, it looks exactly the same as yours

[@gordonthorpe17]

I'm thinking of making a dougnut clamp instead, that way it can't jump off

[@gordonthorpe17]

I could use my tailstock to hold it on but that is defeating the object

[@Paoson_Woodworking]

there are rubber patches and other accessories so as not to damage the object while using the tailstock!

[@WoodworkingBarcelona]

Really good one! I must make myself one of those plates. Thanks for share Suso!

[@Paoson_Woodworking]

thanks Lluis!

[@mihumus]

Great work and nice video as always, Suso!

[@Paoson_Woodworking]

thanks as always!

[@StephenRBlack]

Love it. Thanks!

[@anoirnunesdesouza9074]

Congratulations on the video

[@TheWoodWerker]

Very Nice! Thanks for Sharing! Have A Super Week!.....Gus

[@Paoson_Woodworking]

thanks!

[@canario430]

Is it necessary to use a pulley between the engine and the plate? Could you use the engine directly? Thanks, good tutorial

[@Paoson_Woodworking]

you could use it directly, but this way you can vary the revolutions... thanks!

[@canario430]

thanks

[@RumahBubutRB]

Good ide💪💪

[@MaximKozlovBlog]

COOL

[@Paoson_Woodworking]

thanks!

[@H2Dwoat]

Hi, how have the wooden threads held up after much use?

[@jhapraveen75]

Nice

[@Paoson_Woodworking]

If you'd like to help me, you can upload subtitles in your own language following this link: kzbin.info_video?v=OkwLmxzf3vI&ref=share Puedes contribuir con subtítulos en tu idioma en el siguiente enlace:

[@hassanlarroussi1938]

Paoson WoodWorkin

[@inoemanunggal8588]

Paoson good Luck .. 👍

[@kevindavis8175]

Literally a Woodchuck!

[@Paoson_Woodworking]

yeah! thanks

[@blakehubert18]

Where did you get that spindle??? I have looked everywhere for a spindle that isn’t a 1 or 2 taper

[@jeffoldham3466]

was that some kind of overhead router that cut the grooves

[@WayfarerGX]

Dear Mr Paoson, you have me in anticipation, when or where is the second video? 😁

[@Paoson_Woodworking]

hello Iain, here you'll find all my woodturning videos: kzbin.info/www/bejne/mKS8cnuAgsatd7c

[@thelasermanus]

Home depot sells the conical rubber stoppers dude

[@juanaraya6049]

Ahora con subtítulos es genial

[@gendos702]

круто,лайк!

[@Paoson_Woodworking]

спасибо!

[@anilsharma-rn8ue]

What is the Ele. Motor R. P. M. & H. P.

[@NavigatedChaos]

Can I request something be made?

[@oracll]

я сделал субтитры на русском языке

[@Paoson_Woodworking]

thank you so much!

[@БоратГалушка]

Спасибо за ваш труд, прекрасный канал.

[@ЖеняФоменко-ы3п]

Evgeny Buckovsky вот умница молодец.

[@ВладимирПанин-м5т]

Уважение!!!, благодарю.... .

[@slaison]

Круто👍🏻

[@michelevaiarelli860]

ciao paoson cosa sono e dove li trovo i bussolotti in gomma neri?

[@Paoson_Woodworking]

cercare questo in google: "silent block"

[@gedreillyhomestead6926]

Great videos and I love your ingenuity, but you keep referring to your adjustable faceplate as a 'Longworth chuck', it isnt! See online for Longworth chucks, they are self centering, otherwise nice job.

[@Paoson_Woodworking]

In the description I have already corrected it but I can not change the audio! sorry

[@luissaya3882]

OK

[@costawaseswolle]

daumen hoch