Eventually, the engine must be able to move :) In this model v8 paper engine mounted on vehicle prototype with gear drive with a total ratio 1:9 (two pairs of gears with ratio 1:3)
Пікірлер: 112
@681nm68 жыл бұрын
still faster than a prius
@kungpaogao8 жыл бұрын
Who needs electric or self-driving cars? It's clear that the future is in paper cars run on air power.
@quelorepario8 жыл бұрын
is the camera also made out of paper?
@arieldanieli92768 жыл бұрын
I made a V4 engine in 11 years with the use of some of his ideas ;)
@SOPM20078 жыл бұрын
As you can see, the whole world is from paper only. And it works pretty good :-)
@SP8inc8 жыл бұрын
This is amazing! At a such scale, and with paper! Oh man, awesome!
@L1ndja8 жыл бұрын
You are a Genius
@d07187 жыл бұрын
This is insane. You are very talented indeed. P.S. sounds like a diesel :D
@lazerart48728 жыл бұрын
Когда получил красный диплом "Инженера-конструктора авиационных двигателей", а на работу без опыта не берут..
@jessicajacobson89925 жыл бұрын
Time to smack a turbo on it.
@Piotreksulk4 жыл бұрын
I think it's not possible because you have only air in it so your turbo should have other baloon to make it work. But if baloon will be the same, pressure will not change so it will not change anything, and if it will have bigger, you could use this baloon as a source of air for engine so turbo is useless in it
@bigbrick22974 жыл бұрын
Piotrek Sulkowski it was a joke
@pp_septipurfitasari39663 жыл бұрын
@@Piotreksulk you can connecting crankshaft with centrifugal turbo shaft and crankshaft will spin turbo
@Ludifant2 жыл бұрын
I love the demonstration of the principle, but it does seem you´d get more thrust from the balloon itself, if you just squeeze the nozzle.. But it is very impressive how the paper holds up under the tensions. Great feat of engineering.
@nothingssmore2 жыл бұрын
indeed, with "jet engine" made from balloon with nozzle this vehicle would move much faster
@aquelaquelaquelaquel8 жыл бұрын
Hahah!! You manage to do it!! Looks amazing!! Congrats!! Next do a 4x4 :) Love your work! Maybe you can do a tutorial someday ;)
@Linoran858 жыл бұрын
I was waiting for this, nice!
@KnutNukem8 жыл бұрын
Quite compact
@UtbrsChnnl8 жыл бұрын
these are hella cool dude
@WinyZanin8 жыл бұрын
Please put more videos , it is genius
@redrom92708 жыл бұрын
Amazing!
@lucachalee51688 жыл бұрын
Good work
@NINJATABI8 жыл бұрын
that is SO cool.
@DoNotPushHere8 жыл бұрын
You made my dreams come true (Well, at least some of them... :D )
@jovandjordjevic93518 жыл бұрын
Dude you are fucking crazy, well done! Upload more videos :)
@Goff9688 жыл бұрын
you might have low compression in cylinder 7. u gotta replace the paper piston rings soon
@Queebro8 жыл бұрын
Парень, ты крут. :D
@JessHull3 жыл бұрын
it even sounds like an engine!
@АртемКнязев-ы9т7 жыл бұрын
Предлагаю использовать пластиковую тару, и жидкие компоненты для топлива. придумать что нибудь, что может долго и в большом объеме выделять газ. ))
@Andrey_Gysev7 жыл бұрын
Артем Князев сухой лед.
@animepabu55265 жыл бұрын
Dude that’s awesome
@AdamSmith-tk5br8 жыл бұрын
COOL! I knew you would make a paper car (: Nice car, it works well. Thanks for the superglue hint, that's what I was thinking.
@devilous_43747 жыл бұрын
You need an instant degree in engineering ..
@DeliciousDeBlair7 жыл бұрын
Next build a paper and glue air tank? I think with your skills, it can be easy! I built paper rocket engines before, although being a rocket with fire, they did not last very long, too hot! Maybe make to gradually pump some little vinegar into bicarbonate in a chamber to produce compressed gas, I am not sure, maybe use a sponge for a filter to keep bicarbonate bubbles from escaping pressure chamber so engine does not get messed up.
@nothingssmore7 жыл бұрын
I'm interested mainly in making functioning models from paper, so I'm not sure I'll be experimenting with such "alternative source of pressure" :), at least for now, but thanks for sharing ideas )
@ikbendusan8 жыл бұрын
it's so cute
@jirkas957 жыл бұрын
can you try to make a differential? it would be awsome with any type of rwd vehicles
@potatopcsgamer27555 жыл бұрын
Such wow u made me want to make more engines (I quitted for a little time (did anyone knew i was doing?!))
@babydex8 жыл бұрын
There just needs to be a mini air compressor thats like 2 inches long that you could fit in there then some servos you got a paper rc car
@mioszk5045 жыл бұрын
Genius
@hasanugur28488 жыл бұрын
👆🏾👌🏾👍
@Vethane7 жыл бұрын
are there any blueprints on this?? Nice creations.
@nothingssmore7 жыл бұрын
yes, I've posted a tutorial for creating paper axis here: kzbin.info/www/bejne/i3rOZaSFg9xjqNE , you can find a link to v8 model templates in the video description
@deviledarts8 жыл бұрын
Try building one with water resistant paper. or will it be to sticky/slippery?
@georgechan99438 жыл бұрын
This thing is the first thing I want in my life. Mind if you sell the V8 engine?
@StrayaMate8 жыл бұрын
Can you build a BIG motor for that, because I reckon it would give more torque and power to make it go faster
@nothingssmore7 жыл бұрын
It is possible, but such a motor will require much more pressure and therefore bigger and heavier (rather from metal) compressed air source
@timmymeme1071 Жыл бұрын
Put a supercharger on it
@mad_6519 Жыл бұрын
I would kill to see this but it sadly wouldn't work on the power of the engine. The exhaust air on these engines are far lower pressure than what's going in, so the supercharger wouldn't be able to increase the input pressure. Doing it electronically would defeat the whole purpose because the motor that would be able to power the supercharger would have enough power to run the car so it'd be pointless, and the engine wouldn't be able to generate enough power hooked to a generator to run a motor at any decent speed along with the vehicle. It would be fun to see what modifications could be applied to these engines though
@austinfacemyer77908 жыл бұрын
how many miles a balloon does it get? 😂😂😂
@zeecaptain53518 жыл бұрын
.3
@austinfacemyer77908 жыл бұрын
+Zee captain thx😑
@zeecaptain53518 жыл бұрын
+Austin Facemyer what.? It was a joke
@austinfacemyer77908 жыл бұрын
+Zee captain i know lol
@zeecaptain53518 жыл бұрын
+Austin Facemyer lol
@ThePablo20158 жыл бұрын
Did You make it on LOM 3D printer?
@syphonotan21278 жыл бұрын
Are there exhaust vents for the air at the base of each cylinder, or does the air just come out through the gaps between the piston and cylinder?
@nothingssmore8 жыл бұрын
+Syphonotan , it goes through the gaps
@bloodykills75098 жыл бұрын
How much horsepower does it make? lol
@DimensionDevices8 жыл бұрын
Could you not use some sort of solar based lightweight fan for the air intake - or widen the intake so you can just blow into it or wind would power it?
@nothingssmore7 жыл бұрын
I believe such a fan will be to weak to generate enough pressure for paper engine
@AdamSmith-tk5br7 жыл бұрын
Aliaksei Zholner what about 1oz co2 cartridge with a fine tune pressure adjustment valve to limit the pressure? Would car hold the weight?
@nothingssmore7 жыл бұрын
oh, I thought about such cartriges, but as you mentioned they are pretty heavy themselves, and moreover some additional equipment will be needed (valve, maybe pressure reducer etc), so I don't think they can be used - the engine power is too low. But anyway thanks for participation )
@8bitarmory8467 жыл бұрын
Widening the intake to get more air wouldn't work. Too much energy would be lost to friction.
@MrGyrol8 жыл бұрын
oh God, how did you do that?
@Jeffrey3141597 жыл бұрын
This is not an engine at all! It is an air-motor.
@Ulrigh7 жыл бұрын
Shut up Joffrey!
@jamesl34268 жыл бұрын
Is that one of those engines you made or did you just throw it together
@CaroFDoom8 жыл бұрын
I think he made everything.
@jamesl34268 жыл бұрын
+Car Of Doom I mean like one of the v8 engine he made in the last video
@nothingssmore8 жыл бұрын
+Poop Stain , yes I used the same v8 engine described in previous videos
@jamesl34268 жыл бұрын
+Aliaksei Zholner ok cool I was curious
@BC0pss8 жыл бұрын
Это из-за коробки медленно колёса крутились? Или правда так мало момента?
@nothingssmore8 жыл бұрын
Из-за коробки. Там 2 пары шестерен 1:3 каждая. Если принять что он проехал примерно 2,8 метра за 18 секунд, а диаметр колеса ~5,5 см, то выходит в среднем на двигателе было около 490 об/мин
@BC0pss8 жыл бұрын
спасибо, понял
@trollkirathaka5 жыл бұрын
How did you make bro
@lobotomyy8 жыл бұрын
can you show us how to make the hard paper?
@nothingssmore8 жыл бұрын
+ACreativeName , it should be soaked with superglue in those places where you need additional strength
@abc-dz2iy7 жыл бұрын
which software you use to design ?
@nothingssmore7 жыл бұрын
I use Open Office Draw : www.openoffice.org/product/draw.html
@TheGreatGamerDude8 жыл бұрын
turbocharged inline 6 paper engine plz :3
@bytefloww2 жыл бұрын
voice reveal?
@aaronirvine85538 жыл бұрын
do you think you could a way to shift gears?
@nothingssmore8 жыл бұрын
+aaron irvine , if yo mean to shift gears without stopping the engine then no - this would require a clutch
@Xilver_8 жыл бұрын
+Aliaksei Zholner this is badass
@xati51357 жыл бұрын
what is that sound at 0:02 and 0:06 ? its really bugging me not knowing what it is
@nothingssmore7 жыл бұрын
it is autofocus
@FOOXBRIAN8 жыл бұрын
try using vinegar and baking soda to power it
@billstephens29888 жыл бұрын
+Brian Foox That'd wreck the engine dude
@DavidScheiber8 жыл бұрын
+Brian Foox its still paper man
@FOOXBRIAN8 жыл бұрын
You guys are not seeing like im seeing
@realmmaster77788 жыл бұрын
+Brian Foox dude that would go sonic fast! not to mention more "gas"
@DavidScheiber8 жыл бұрын
oh now i see what you mean
@Мирпластилинаинетолько2 жыл бұрын
Привет, пж, расскажи как ты шестерни делаешь? Я их пытался рассчитывать, но не получается...
@nothingssmore2 жыл бұрын
насколько помню, именно для этой модели то ли онлайн калькулятором шестерен пользовался, то ли скачивал, сейчас название не помню, но вот например навскидку нашел онлайн geargenerator.com/#200,200,100,6,1,1,1451.6999999999625,2,1,8,2,4,27,-90,0,0,0,0,0,0,16,4,4,27,-60,0,0,0,0,0,0,3,22
@Мирпластилинаинетолько2 жыл бұрын
@@nothingssmore спасибо бро)))
@welcomegod8 жыл бұрын
y need 4 balloons?
@nothingssmore8 жыл бұрын
+Catvin Aw , the engine itself (without load) works with one balloon, but for powering something air pressure need to be higher