I love that each engine sounds like their larger counterparts
@Jackobisnotenough3 жыл бұрын
Мастерская работа! Вашим моделям нет равных!
@leoandreychil94003 жыл бұрын
Полностью согласен таких мощных и маленьких нету больше не где
@user-km7ie3ip2y3 жыл бұрын
Прошло 2 месяца, уже 4 тысячи просмотров и ни одного дизлайка) Двигатель шустрый получился! Хорошая работа!
@sohamm6893 жыл бұрын
Now i want to see if it can fly with a propeller attached to it. Like an helicopter or something.
@mk63153 жыл бұрын
Air compressor base station :)
@Smertnik133 жыл бұрын
Звук холостых оборотов просто огонь 2:16
@LisuAvangard3 жыл бұрын
This is so awesome! I would love to see a model airplane actually using this engine!
@thefutureistubes58383 жыл бұрын
Better than the engine in my first car
@japanesedog033 жыл бұрын
Thank god i found this channel
@paperman3d6433 жыл бұрын
Обалдеть не встать!!! Уже можно свой музей по типу кунсткамеры организовать!
@nothingssmore3 жыл бұрын
Спасибо ))
@JessWLStuart3 жыл бұрын
This is coolness covered in Chocolate!
@TheTrophyMerchant2 жыл бұрын
Im an old viewer from another account, so happy to see you’re still here!
@Leonel.q3 жыл бұрын
Thank you!
@Safian_193 жыл бұрын
как вы делаете такие маленькие двигатели из твёрдой бумаги да ещё что бы небыло трения
@nothingssmore3 жыл бұрын
если ответить односложно - "долго" :) А если подробней - то бумага обычная, но в нужных местах покрыта суперклеем для придания дополнительной жёсткости. Трение естественно есть, но т.к. в большинстве моделей не нужна герметичность, то можно несколько увеличить зазоры между движущимися частями + иногда пользуюсь "грифельной пылью" - мелкой стружкой из грифелей от карандашей, она также помогает уменьшить трение
@Tivadar263 жыл бұрын
Поздравляю с всемирным днём блогера!
@PuFF1kPuF3 жыл бұрын
Смотря ваши видео, чуствую запах офисной бумаги) Хотя уверен что у вас там пахнет клеем)
@A.Elbereth.Gilthoniel3 жыл бұрын
Очень круто!
@something_bookish32403 жыл бұрын
Everytime you make something awesome. You should make a w16 engine
@pp_septipurfitasari39662 жыл бұрын
W16 is very complicate
@something_bookish32402 жыл бұрын
@@pp_septipurfitasari3966 but nothing is impossible.
@keminoff3 жыл бұрын
When will the paper spacecraft be built?
@sunsetboy61273 жыл бұрын
Жду Газотурбинный двигатель из бумаги))
@sajalacharjee70083 жыл бұрын
That's super cool man. You did a great job.
@Inecendium3 жыл бұрын
Как красиво!! Прям работа мастера:)) Вот идейка сделать parallel twin как у мотоцтклов, считаеться что он самый надёжный и кгмпактный что есть, может быть очень интересно в бумажном формате:)
@olegkruglov98173 жыл бұрын
Молодец продолжай в том же духе. Рад что вернулся и снова делаешь видео!
@alanoneuser3 жыл бұрын
Beautiful work, it wants to go into a paper airplane
@nothingssmore3 жыл бұрын
Thanks ) Me too, but I'm not sure it is possible to achieve with only paper
@alanoneuser3 жыл бұрын
@@nothingssmore I would imagine you could put a balloon or perhaps a CO2 cartridge inside the fuselage to provide air pressure.
@nothingssmore3 жыл бұрын
@@alanoneuser actually I did perform some experiments with "regular" CO2 cartridges (the same one which are used for pneumatics), but amount of gas is quite small there, and even with pressure reductor they can power the model for only a very short time. Also, those cartriges and adapters/pressure regulators weight too much to be "carried" by paper engines :(
@alanoneuser3 жыл бұрын
@@nothingssmore Well it is a fantastic little machine anyhow. Have you yet tried making an engine so that the driveshaft is fixed in place and the engine block turns, like a real radial engine on an aircraft?
@kiarashsoleimani77193 жыл бұрын
That was amazing 👌👌👌
@LadyTigerLily3 жыл бұрын
Impressive and informative!
@germanobando31493 жыл бұрын
Amazing
@diji50713 жыл бұрын
Beautiful my friend! From Alberta Canada.
@pp_septipurfitasari39662 жыл бұрын
Who are you?
@Pukanvulkan963 жыл бұрын
Сколько времени занимает сборка такой модели?
@nothingssmore3 жыл бұрын
Сама сборка - несколько вечеров. Если добавить планирование/разработку - может пару недель
@olmocap55482 жыл бұрын
This videos sparked my curiosity a bit. Theoretically speaking it should be possible to attach an air pump (like the tiny ones used for car tyres) to the engine and slap a control system to make an RC vehicle powered (mostly) by compressed air
@nothingssmore2 жыл бұрын
In theory - yes, but the pumps I aware of are too heavy for such a weak engines to carry
@olmocap55482 жыл бұрын
@@nothingssmore what about the "xiaomi air compressor" it weights around 480 grams and maybe it can be even possible to discard the carcasse to make it even lighter
@olmocap55482 жыл бұрын
then the only thing needed would be a powerfull enough engine and a control system
@nothingssmore2 жыл бұрын
@olmocap, as you can see, even extra-lightweigth model like this kzbin.info/www/bejne/n5q2f6CXd9l7gdU is quite "heavy" for such an engine
@BayanBayanych3 жыл бұрын
Хорошо
@iktorn35393 жыл бұрын
please do a tutorial of building a small single cylinder engine and add a link to templates
@feihuhan34013 жыл бұрын
nice,there is no printplan?
@nothingssmore3 жыл бұрын
See description
@rajabhowmick_223 жыл бұрын
Awesome sir
@crackedemerald49303 жыл бұрын
You are an incredible artist.
@TheAmazingMrB3 жыл бұрын
Where does the exhaust on the up stroke go?
@ezraclark79043 жыл бұрын
looks like the air can flow back into the distribution area because the valves are just flaps
@TheAmazingMrB3 жыл бұрын
@@ezraclark7904 that was my take too, but I’d imagine it’s hard because it’s just pushing back against the head pressure of the balloon.
@DoNotPushHere3 жыл бұрын
@@TheAmazingMrB I bet he's relying on leaks everywhere
@rizalardiansyah44863 жыл бұрын
@@DoNotPushHere I guess you're correct because that would explain the holes near the shaft on the other side (the opposite of the distributor side)
@DoNotPushHere3 жыл бұрын
@@rizalardiansyah4486 hadn't payed attention to those! But even if there is leakage between piston and cylinder, you are right, it has to go somewhere apart from the balloon, otherwise the pressures are equalized at both sides of the piston
@meady2003 жыл бұрын
Godlike
@adotam3 жыл бұрын
Does it get hot at high rpm's?
@nothingssmore3 жыл бұрын
No, at least during the tests I performed (about 1 minute of running)
@zachatttack31073 жыл бұрын
What are you using for the axle? I tried shaving down a toothpick, but it’s not quite sturdy enough..
@nothingssmore3 жыл бұрын
Axis, as everything other in this model, is made of paper. I've created tutorial video for V8 axis, and here you can use "central" part of axis (without wrapping by second layer of paper)
@gurvanshsinghramdiwali4646Ай бұрын
Hi nice creation it is a great idea but I was curious how do exhaust happen in your engine
@nothingssmore23 күн бұрын
Thanks. In most of my models there is no dedicated exhaust system - waste air goes through the gaps between pistons and cylinders
@rajabhowmick_223 жыл бұрын
Please upload the template file.... I wanna make it for.... Myself.. ☹️🌈✨⚡🙏
@nothingssmore3 жыл бұрын
Please see description
@rajabhowmick_223 жыл бұрын
It's so powerful
@user-xo2lx1lu4s3 жыл бұрын
Где новые видео? Мне очень нравятся твои поделки!
@nothingssmore3 жыл бұрын
пока нет идей "достойных" )
@user-dj8qt6yw3b3 жыл бұрын
@@nothingssmoreпопробуйте сделать рабочий поезд на каком-нибудь движке, чтобы он мог ездить по бумажным рельсам)))
@eizel_23272 жыл бұрын
@@nothingssmore радиальный двигатель с вращающимся блоком цилиндров
@kartiklalge20143 жыл бұрын
Will it work if it's made from the templates enlarged 2.5x just like the one you did for V8 ?
@nothingssmore2 жыл бұрын
I think yes
@dr.sukantakumarpatra56632 жыл бұрын
Please do 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
@onlinehelper3742 жыл бұрын
@@nothingssmore Give me one reason why it will not work.If your templates are good and you just make it 2,5x bigger,it will still work
@nothingssmore2 жыл бұрын
@@onlinehelper374 my answer was "I think yes" )
@sharadkumarsingh48022 жыл бұрын
@@onlinehelper374 one reason it might not work is: larger parts = more friction and more air leaks 🙃
@evilsouravpubg34183 жыл бұрын
Can you pls tell us what kind of A4 sheet do you use?
@nothingssmore3 жыл бұрын
80 g/m2
@rekcahtserof65693 жыл бұрын
I want to make this engine
@dr.sukantakumarpatra56632 жыл бұрын
What do you do for , exhausting in here
@nothingssmore2 жыл бұрын
There is no any special exhaust system. Waste air exhausted from the gaps between piston and cylinder, as they are not perfectly sealed
@Leongardful3 жыл бұрын
next - airbus
@konachan56003 жыл бұрын
Hey man think of making a boxer engine like EJ20 of subaru?
@nothingssmore3 жыл бұрын
maybe sometime in future, but not now
@konachan56002 жыл бұрын
@@nothingssmore hey i been thinking of way to build boxer motor and come up with some idea would you like know?
@MultiNike79 Жыл бұрын
А как клеете такие маленькие детали, если не секрет? А что-то более комлексное не пробовали делать? :) Прикрутить двигатель к коробке передач там, гусеницы?
@nothingssmore Жыл бұрын
что-то вручную, иногда пинцетом пользуюсь. По более комплексному - уже есть кое-что на канале, например kzbin.info/www/bejne/jZKqdJqega5jm5o , или kzbin.info/www/bejne/n5q2f6CXd9l7gdU
@ds-yg2lf3 жыл бұрын
А канал ещё живой ?
@nothingssmore3 жыл бұрын
время от времени )
@ds-yg2lf3 жыл бұрын
@@nothingssmore это хорошо
@f11ankitsarkar803 жыл бұрын
How do you make small hole in paper.
@nothingssmore3 жыл бұрын
sometimes with a tiny drill, but mostly - with a sharp thin modelling knife like this www.drakkar-models.com/tools/miniatures/cutter-scalpel-modelling-knife-excel.jpg
@ussrmonster30652 жыл бұрын
Идея, сделай копию машины Lamborghini
@nothingssmore2 жыл бұрын
идея хорошая, но мне не очень нравится создание статических моделей, а как сделать функциональую копию из бумаги я пока не представляю
@rte3y8382 жыл бұрын
is it a plane engine?
@fitasari31232 жыл бұрын
Yes
@rte3y8382 жыл бұрын
@@fitasari3123 oh okay
@nothingssmore2 жыл бұрын
I'd say "almost yes" :) Radial engines indeed are mostly used on aircrafts, but there are also cases where it was installed on cars monochrome-watches.com/radial-engines-in-cars-well-why-the-heck-not/ and even on tanks en.wikipedia.org/wiki/Radial_engine#Tanks
@rte3y8382 жыл бұрын
@@nothingssmore that is interesting
@williamwalters37963 жыл бұрын
I want to make one and adapt it to lego technic. Better yet just make an entire clock out of paper instead of lego then drive if with this.
@C0MPLEXITY3 жыл бұрын
How does it work? Principles?
@nothingssmore3 жыл бұрын
this is a pneumatic engine, it works on compressed gas. Similar principle can be viewed here: animatedengines.com/co2.html
@C0MPLEXITY3 жыл бұрын
@@nothingssmore thankyou
@sunsetboy61272 жыл бұрын
Хотел спросить,можете сделать туториал и развертки на паровой двигатель? Хотел попробовать сделать но не получилось 😅
@nothingssmore2 жыл бұрын
возможно доберусь когда-нибудь
@Cakelovergirls2 жыл бұрын
Is it possible to make a paper vehicle that size
@nothingssmore2 жыл бұрын
I've created a simple vehicle prototype previously - kzbin.info/www/bejne/n5q2f6CXd9l7gdU
@onlinehelper3742 жыл бұрын
So, when you will upload a new video?
@bytefloww2 жыл бұрын
как ты сделал эту маленькую деревянную "поддержку" с двумя зубочистками, чтобы сохранить правильное расстояние между шатунами?
@nothingssmore2 жыл бұрын
это не дерево, она из картона, а стержни - из тонкой скрученной бумаги
@Kristano.bananaSuiii Жыл бұрын
That got higher rpm than a vitz can go max
@denbagautdinov752 жыл бұрын
Можно пожалуйста самую простую рабочую поршневой двигатель
@nothingssmore2 жыл бұрын
Самые простые из тех что я делал - вот эти: kzbin.info/www/bejne/oZy2mGNoqZl8etk kzbin.info/www/bejne/m3OkYaGZlMybqsU
@charging_station23 жыл бұрын
noice
@iktorn35392 жыл бұрын
Hello. Is it possible to make a working paper engine without valves? Which has ports in the cylinder? Something similar to the 2t engine. Or something with a piston timing.
@nothingssmore2 жыл бұрын
Hello, not sure about it. I tried a couple of times to create models with rotating valve, something like this www.researchgate.net/publication/347273471/figure/fig1/AS:1021710291697665@1620606124526/Schematic-diagram-of-the-working-principle-of-the-rotary-valve-engine-23-Cylinder-Head.jpg but not succeeded
@user-wx3of9wz3h3 жыл бұрын
Интересно высокие обороты выдиржет?
@Safian_193 жыл бұрын
думаю перегреться и детали сотрутся
@nothingssmore3 жыл бұрын
по мне так для бумажной модели и 8 тысяч - довольно высокие обороты :)
@sunsetboy61273 жыл бұрын
@@nothingssmore думаю не только высокие,даже монстрозные
@kaushik_biswas_063 жыл бұрын
Where is templates
@nothingssmore3 жыл бұрын
See the video description
@88OlegbebrovishАй бұрын
приделайте к нему лопасти пожалуйста
@nothingssmoreАй бұрын
так в конце видео есть "лопасти", для замеров частоты вращения
@pp_septipurfitasari39662 жыл бұрын
What did you make now, it took 8 month?
@nothingssmore2 жыл бұрын
not 8, but a couple, I guess - kzbin.info/www/bejne/hnKZi5qwe9agg9U
@onlinehelper3743 жыл бұрын
Hello bro.Please make a compressed air powered engine with rotary valve.
@artemalexeev80113 жыл бұрын
I believe, he has made a Wankel engine. Is it what you had in mind?
@onlinehelper3743 жыл бұрын
@@artemalexeev8011 No bro.Classic piston engine with rotary valve, which is the rotating pipe with hole on the side.When pipe rotate to hole be face to face with cilinder gas go in cilinder and push the piston.The valve is driven by crankshaft directly or by pulley 1:1ratio with crankshaft
@nothingssmore3 жыл бұрын
I actually tried to build a couple of models with such a valve, but unsuccesfully - too much friction between the "valve" cylinder and its housing. But this was many years ago, and those models was far from accurate, maybe I'll try again sometime
@onlinehelper3743 жыл бұрын
@@nothingssmore Ok,bro.I hope it will work well.And please try to make a car powered by it engine.Yes, I know you made a prototype but make one more with more details,to look like a car
@pp_septipurfitasari39662 жыл бұрын
Can you make a jet engine?
@nothingssmore2 жыл бұрын
the only appropriate non-destructive "fuel" for paper models (at least as I can imagine) is the compressed air. So "jet engine" model would be just a nozzle. As for the "turbojet engine" - it is more interesting, but again, with the compressed air it would work only as a turbune. But maybe sometime in future I'll try to make something like this
@pp_septipurfitasari39662 жыл бұрын
Its more like a rocket engine
@pp_septipurfitasari39662 жыл бұрын
@@nothingssmore or tesla earthquake machine? I have one but doesnt work
@gajananpache9740 Жыл бұрын
Can you please make engine template with each and every measurement.🙏🙏🙏🙏please
@nothingssmore Жыл бұрын
All the measurements should be ok if you print templates on A4 paper
@ayekhin48045 ай бұрын
How can I scale up
@nothingssmore5 ай бұрын
You can find a link for scaled up templates in the video description
@ayekhin48045 ай бұрын
Alr ty
@rajabhowmick_223 жыл бұрын
Next it v12 engine different style
@pp_septipurfitasari39663 жыл бұрын
which is better turbine or piston
@nothingssmore3 жыл бұрын
"better" is not quite a certain criteria, each one might be better in different situations
@pp_septipurfitasari39662 жыл бұрын
Ok
@pp_septipurfitasari39662 жыл бұрын
For speed?
@onlinehelper3742 жыл бұрын
@@pp_septipurfitasari3966 turbines can have almost 100 000 RPM
@pp_septipurfitasari39662 жыл бұрын
Ok
@pardeepkaur32593 жыл бұрын
Hello sir can you ask me from where the air go out the cylinder
@jacfalcon3 жыл бұрын
Out the side with the very short rod, the holes where you can see the piston area.
@nothingssmore3 жыл бұрын
the "waste" air go out through the gaps between pistons and cylinders, because they are not airtight
@avidadeumfurao46172 жыл бұрын
Me ensina a fazer um aviãozinho a energia eólica? Вы научите меня, как сделать маленький самолет с ветряным двигателем?
@nothingssmore2 жыл бұрын
если бы я умел сам, то мог бы попытаться научить, а так...
@avidadeumfurao46172 жыл бұрын
👍🇵🇹🇵🇹
@IS--Subhankarpradhan Жыл бұрын
Vane motor please
@krishnaparmar347 Жыл бұрын
Bro where is exhaust
@nothingssmore Жыл бұрын
there is no separate exhaust system in this model - waste air goes through the gaps between pistons and cylinders, as they are not airtight
@Ingeneria Жыл бұрын
@@nothingssmore а что с каналом случилось почему больше нету роликов ?
@ayekhin48042 ай бұрын
I need help with the piston
@nothingssmore2 ай бұрын
it would be difficult to help without details of the problem
@ayekhin4804Ай бұрын
the piston cylinder head
@user-cw7zi9ku5c3 жыл бұрын
Можете сделать радиальный двигатель упрощённой конструкции как в этом видео kzbin.info/www/bejne/a3iXiKqXbpmSl68
@nothingssmore3 жыл бұрын
боюсь что такого качества мембраны из бумаги не выйдет сделать. Я пробовал в Стирлинге, много проблем с ними