Let us know what would you like to see for our next challenge 🤔 #CutThisPolishThat
@JS-zb1vv Жыл бұрын
Maybe a job ! With the voyager with a euro seam then all parts ran through the slab back for time.
@ParkindustriesUSA Жыл бұрын
@@JS-zb1vv Great suggestion - we have it our list!!
@franksesek8824 Жыл бұрын
A complete kitchen. From measurements to Fab to Final install. Full backslash and waterfall island vein matching.
@ParkindustriesUSA Жыл бұрын
@@franksesek8824 very good suggestion! We will have to find a fabricator to partner with on this most likely.🤔 We've got it on our list, thanks Frank!!
@ParkindustriesUSA Жыл бұрын
@@JS-zb1vv kzbin.info/www/bejne/gYmZpJehd5Knlck 😎
@preopticfear8 ай бұрын
At 4:20 seconds, he reversed the direction of a miter cut. How did he do that, my machine always says you can’t reverse the direction of a miter cut or jet
@jax3032 Жыл бұрын
not too bad, need practice on order of cuts though! One thing that I find difficult about the saberjet is when the saw head rotates 180 deg cutting in an opposite direction its often 1/8" different, have never quite figured out why. Worked with 3 different saws and they all do it.
@zbutler3111 Жыл бұрын
I had this same problem. The measurements go x- to x+ so if you are cutting from top to bottom, you have to add that thickness of the blade otherwise you'll be an 8th under everytime. It doesn't quite make sense to me but adding that difference has been a band aid fix for me. I'm running a fusion 4045 SL.
@matthewbown2988 Жыл бұрын
Something is not calibrated on your machine correctly. I would suspect c axis is out also check to see if your table is the exact same height everywhere. We take a mill blade and mill our metal slats so the table is dead on to the saw. Miters turn out perfect.