Love your clear and detailed explanation. Definitely subscribing!
@ee816vt5 ай бұрын
Just a silly question: before the removal of mechatronic the hydraulic liquid of the gearbox must be drained? Thank you for sharing your knowledge!
@MBAAUTO5 ай бұрын
If you want to have a bath with gear oil than no 😂
@chuggins79987 ай бұрын
Great set of videos. I’ve followed your advice but I have a faulty accumulator, how do depressurise it before removing?
@MBAAUTO7 ай бұрын
If it's in the car use VCDS Transmission electronic > actuation test > depressurise accumulator
@MBAAUTO7 ай бұрын
If it's out than loosen it ¼ of a turn every 15 mins
@AsifAli-qr8pk4 ай бұрын
Bro after reinstalling do you have to calibrate any thing or will it work straight away? I did same thing removed and clean and put it back and started the car it goes in gear PRND but doesn't move at all. Before it was driving only in D2 . That was the fault on it. Do i need to calibrate or not?
@MBAAUTO4 ай бұрын
If it's only driving in D2 check Reverse also if the reverse works and drives only in D2 than chances are you have a bad clutch and not a bad Mech. Unit
@brodjones84973 ай бұрын
When you removed the unit the selector arm on the gear box was moved to the neutral position, the shifter in the vehicle was left in the park position. so when reinstalling the Mechatronic unit do you move the selector arm on the gear box back to the park position so that both leavers are in the park position? Reply
@MBAAUTO3 ай бұрын
No keep.it.in neutral at all.times
@ЛюдмилаСамборская-м1о9 ай бұрын
You do it really good, very smart men!
@MBAAUTO8 ай бұрын
I appreciate that!
@aofficialvlog2255 Жыл бұрын
🔥🔥🔥🔥🔥🔥
@zoyka56749 ай бұрын
very interesting!!! I like your videos😍😍😍
@MBAAUTO8 ай бұрын
Glad you like them!
@bradleychristie7123 Жыл бұрын
Hi thank you for video how do you reinstall the gear lever as it neutral
@MBAAUTO10 ай бұрын
Hi, can you please explain further I didn't understand what you want to ask me
@brodjones84973 ай бұрын
@@MBAAUTO when you removed the unit the selector arm on the gear box was moved to the neutral position, the shifter in the vehicle was left in the park position. so when reinstalling the Mechatronic unit do you move the selector arm on the gear box back to the park position so that both leavers are in the park position?
@aqib20002 ай бұрын
@@brodjones8497after installation, just move the level on the TCM to park and clip it back in (always keep the gear level inside the in Park)
@ЗояСамьорская Жыл бұрын
Cool!!!
@pavdark11457 ай бұрын
Bro this is all easy. you did not make video for the Magnets N & S Pole which is important.
@MBAAUTO7 ай бұрын
Subscribe for in depth videos soon👍
@aqib20002 ай бұрын
Please explain what is meant by N and S pole magnet thanks