Washer Repair- Replacing the Clutch Assembly (Whirlpool Part # 285785)

[@lutherm116]

12 years later and this video helped me fix my washing machine that had stopped spinning

[@parnellitube]

It's 2024 and thank you for this video! I love my old school Kenmore washer and used this video to help me do a complete transmission and clutch replacement. It got a new timer about a year ago so I figured I was committed. I'll be back to drop another comment in 20 years!

[@littletieshia]

Thank you for the video. I could just kiss you. My husband and I purchased the part and installed it this morning. I did one load and the problem appears fixed. It is such a relief. The old clutch didn't appear to be broken but was covered in black debris. Again, thank you so much. You saved me $100s of dollars.

[@charlesedwardwalkerjr.]

I REPLACED THE COUPLER and Cleaned up the Clutch and now it works perfect as new. Your video is very descriptive and helpful. Many Thanks.

[@krystalk2496]

I love this guy.... he so calmly fixes everything. Has saved me so much money!

[@R0binder]

Still saving husband's weekends 9 years later. Well done! Made job this simple and fast to complete.

[@timebrowser]

Steve, Thank you very much for your excellent video. I really appreciate you all taking the time to share your expertise. I think we owe it to the people who made these machines to keep them going as long as possible. Your perfectly presented step by step instructions made me look "awesome" to my wife. Thank you very much! Best wishes to you all. Time Browser

[@TheNomanzero]

Bravo! The only video that shows the alignment of the 1/2" metal stop clip before inserting the agitator.

[@eortiz2307]

Just used this video to repair our washing machine. Great video! Definitely a Life Saver. Especially considering a repair service wanted to charge me about $580 for the repairs!!! 😠😠. Clutch cost me $50 and some of my spare time. Thanks again! 👍🏽👍🏽👍🏽

[@brianciappara894]

Great video! I changed the coupling on my Whirlpool washer without any problem. The motor was running but the agitator was not running. I followed your very detailed video and wow! the washer is running better than before. Thanks a million.

[@heaven9036]

This is the best video I have found on the replacement of a clutch. Just a realization: returning the Retaining Clip is not as easy as shown on the video. Also, I broke my D clip. Besides that, we are happy with the repaired washing machine. We should repair things than throw them away Thank you from the Philippines.

[@lauriedean2581]

Thank You!!!! You are WONDERFUL!!!! The sound on my computer doesn't work but I could still follow. Can't thank you enough!!

[@jimr6846]

Thanks I did this and changed the clutch by watching your videos and boom my washer is back in action!!! Thanks.

[@margr2119]

I like how you really took your time to explain and show the parts you were taking off and replacing !!

[@code4aliving]

Great video - thank you for the detailed walk-through, as well as the excellent video production. This is definitely among the top 1% of the DIY videos I've reviewed for appliance repair.

[@MrObeast44]

Great video! I just did this repair and it was a cakewalk. I just disconnected the pump and left the motor attached to the gearbox. It slid out easily and wasn't too heavy all as one unit. Doing it this way allowed me to leave the cover and everything on, other than the agitator of course.

[@Kirbygram2]

Every time I lay down the machine the pins fall out and it's never fixable

[@timrobnett499]

Great video step by step. Fixed my problem and I've never worked on a washer before. I appreciate the help.

[@moggmusic]

Very good! Probably saved me having to buy a new washer. This Inglis Liberator is going on 40 years and still going strong. :)

[@carmenpaez9719]

Very grateful with all I have learned with you, Sr. My question is that my washer machine doesn't have the ring that you remove in minute 10:35. I have already change the Clutch assembly, shaft Direct Drive, washer motor coupling, water bomb, and many other little tings , but it still make a lot of noise between wash and spin. And I can't find the ring between the shaft and the clutch assembly. I think that's the problem, but , since I got my washer machine used, I really don't know what happened with it.

[@golfprod]

Nice tutorial. The clutch was the problem. The washer spins again. Getting the cabinet back on ended up being the most frustrating aspect! Thanks

[@thundercloud47]

I'm not the one with that problem but I like this response here because it's given me the idea to take my wet/dry vac and clean the assembly of any debri that might be there. A clean rag might do the job even better.

[@Epiha]

Appreciate the video but I would edit @ 11:19 the placement of the brake cam and/or the configuration of the cam is important for inserting the clutch, also need to mention the clutch spring needs to be moved so it won't hit the brake cam. Also, in the case of an older and more used washer a rubber mallet will be useful to hammer the clutch assembly in order for the three bolt mounting holes to line up with the mounting points on the clutch base to re-install the screws.

[@rdietz68]

At 18:42 - Should you lubricate the spline shaft with waterproof grease before you reinstall the agitator? When I took mine off for this procedure.. it had some type of original greasy residue.

[@HolbergEM]

Thanks! Almost bought new washer (no agitator, though), but after brief research and a couple of hours of replacing and cleaning, my old washer looks and works like new.

[@MovieGasm]

Thank you so much my man. I saved my grandmaw from needing to buy a new washer after I troubleshooted it. Your guide A+.

[@Erik-dc7vf]

Thanks for the help! Fantastic video. I could’ve figured it out without this video but it would’ve taken 10 times longer. Thank you!

[@kriskubis3061]

Thank you so much for posting this Steve! I replaced my clutch and now my machine drains properly!

[@legendmitchell3040]

I guess Im asking the wrong place but does someone know a tool to get back into an instagram account?? I somehow forgot the password. I would appreciate any tricks you can offer me.

[@morgancolton7399]

@Legend Mitchell Instablaster =)

[@legendmitchell3040]

@Morgan Colton Thanks so much for your reply. I got to the site through google and Im trying it out now. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

[@legendmitchell3040]

@Morgan Colton It worked and I actually got access to my account again. I am so happy! Thanks so much you saved my account !

[@morgancolton7399]

@Legend Mitchell happy to help :)

[@users-9pR2s7]

at 10:53 what is the part number for the e-clip that holds the brake cam in place. The clip keeps coming loose!

[@toddlindley9482]

Sir, you are a lifesaver! Thx so much for taking the time to post this in a step by step fashion for the 'unhandy' among us👌🤓

[@motorhead45102]

@partselect oh the repair went smooth, i was like wow everything worked first try, and man you should see the difference on how fast the washer picks up on speed, its like a brand new washer.

[@krimmer66]

Great video, was very easy to follow. The clutch springs I got were light blue and dark blue and the one in the machine was between the two! Instructions said blue or black! I went with the light blue because it looked like a heavier spring for my large capacity machine. Running the machine now and all seems good except a very strange squeak while agitating.

[@Tiggerr90]

Thank you so much for your helpful videos! I took my washer apart and put it back together no problem with these easy to follow instructions. I replaced the motor coupler but used this video as a tutorial first. Its good as new and I feel great doing it myself

[@scottyeubanks4975]

How come my washer clutch assembly is hard to get out??

[@LibraLovesFaVs]

Never thought I'd ever repair my own washing machine, but I did, thanks to your teachings I did it! Yay! lol :o)

[@JohncyBloomhunter]

Also my first washer. It was a little difficult and I would recommend def watching out for the sharp edges first time. So glad for these instructions though.

[@PanamaSticks]

Excellent video. I just want to know if the cabinet itself can be disassembled without damaging it. I have a lot of rust between the top of the cabinet and the sides and front. I don't know why.

[@bethcarney284]

Thank you so much. Due to your excellent instructions, I was able to fix my dryer.

[@sircrowman]

great video but at 13:00 you can see it real good at bottom left on the stand what is the plastic tube with what looks like pins in it what is that and what the for any help very much appreciated

[@goldenhelmet403]

At 12:20 my transmission & clutch assembly is getting stuck about 1/2 inch shy of going all the way back on. What could be wrong?

[@goldenhelmet403]

Found the answer to my problem in this video kzbin.info/www/bejne/p2qXY6uklJeJjrs at 7:50.

[@davidwigley6975]

Got up to 12:00 but my transmission isnt going far enough back in to install the 3 bolts. Any help would be appreciated, not sure what I did/am doing wrong

[@jerrylong8678]

THIS WAS VERY HELPFUL , REFRESH MY MEMORY ON WASHERS , THANKS I WILL RECOMMEND THIS VIDEO TO EVERYONE , THANKS STEVE ,

[@thundercloud47]

Good video. I think the clutch is whats wrong with mine. it's a Kenmore that looks like this one. It only washes on the Gentle cycle. Won't wash on the normal one. I watched a video similar to this one where the Tech did not remove the cabinet. I see by yours that it makes the job easier. I hope you have videos on Kenmore dishwashers too I have a problem with mine. Thanks again!

[@DSC800]

The best "how-to" I've used on KZbin. I could have done it without it, but would have taken me 4 times longer. Thanks!

[@partselect]

You're welcome and thanks for the compliment!

[@motorhead45102]

this has been about the best instructional video on how to do this, thanks

[@scottyeubanks4975]

My shaft will not come out as easy. Why is it hard to remove??

[@josecontreras1302]

excelente video,muy bien explicado paso a paso,lo felicito profesor.saludos desde Caracas,Venezuela.

[@mikegoss1148]

I have a whirlpool cabrio WTW6340WW0 Whirlpool Washer that vibrates really bad during low speed spin cycle. I have replaced the suspension rods, leveled the washer, pulled the drum, no noise coming from drum shaft or play from shaft, checked motor bolt for tightness .it seems like its missing more suspension parts on the bottom drum. any thoughts on what else I can check.

[@SAfricanQueen33]

Great instructions, though I didn't have to take the cabinet off... But this still helped me fix my washer, thanks!

[@hectorhuyo4296]

Steve you make it look very easy and it is if we follow your instructions . Great video! Great teacher.

[@stevemack00]

I liked the trouble shooting in the description, that's exactly what mine is doing. Thanks for the great video.

[@mrgcav]

Need help... I did the clutch repair on a LSR7010pq1. The center shaft was corroded and would not come out. Took a lot of effort, hammering and time but I got it out. I removed the inner spin basket thinking it would help me get the shaft out. Wrong. The drive block is stuck in the basket and no amount of hammering with a 4lb mallet will set it free. Replaced clutch and reassembled without issue. The drive block was very difficult to tighten and get it to lock on the shaft. But I got it tight. Now when empty, Low spin is fine but in high spin it goes violently out of balance. I checked the suspension components and they are all in tact. The Spin basket remained attached to the shaft after several tests. Not sure what went wrong. I think it is related to the drive block or the basket. What confuses me is that it is fine on low spin. I am going to run it without the Spin basket to see what happens. Any Ideas what my problem is ?

[@Kntryhart]

Excellent videos. All went as shown until I tried to remove transmission. As I slide out agitator shaft there is a mechanical interference (clunk) that prevents it from being removed. This interference happens at about 2-inches. All seems free and clear, but the shaft will not slide out. Any thoughts? Model LA9500XTN1 S/N: CB0503088. Thank you!

[@partselect]

Thank you for the compliment. We have some great customer written instructions on our site. If you use the model number of your washer you can access the washer’s schematics. We have information about replacing the transmission there and there are some detailed instructions - search for part number 3360629. Start there and see if that helps. If not then let us know. :)

[@stevenschnelz6944]

Pull harder or tap the shaft. I had the same problem and just pulled it out. No need to pull the housing or remove the motor (unless you are replacing the motor coupling and then it is easier after the motor/transmission is out).

[@mickjager5974]

Mines missing the e-ring. Not sure it it flew out when I was taking it apart a few days ago and I just don't remember or what could have happened to it. Can you run without it?

[@KevinLanahan]

Thank you for helping me do this repair. The hardest part was just finding the part locally!

[@tshaunscales525]

What type of Channellock pliers are recommended for the eclips

[@MC-mh2ju]

My direct-drive Kenmore 500 produces a loud "bang" sound every time a spin cycle begins. I am fairly certain the noise is produced by the spring portion of the clutch "slamming" into the brake cam, to release the brakes and allow the tub to spin...Is the loud "bang" normal? Other than that, the tub spins normally and rapidly and there seems to be no damage done to the brake cam or other components of the basket drive.

[@69indian70]

Excellent step by step instructions. Though I'm not sure why it was necessary to remove the cabinet. I think easier just to turn the washer over.

[@brendaclamors6183]

Would you mind addressing an issue with a Kenmore washer spinning but makes a loud knocking noise during the spin cycle. Stops when you open the lid. From everything we check out could it be the clutch? Thank you for your time.

[@anneclong]

Watching you do repairs is like watching Bob Ross paint. Very relaxing. However, I’d love to see some outtakes with you throwing tools and cursing with bloodied hands. Like how mine usually go 😉

[@desmondyankana9531]

Does the clutch stop agitating ?

[@parnellitube]

If you can grab the agitator and spin it in both directions by hand, then you need to replace the nylon dogs under the cap on the top of the agitator. They're cheap and super easy to replace.

[@xuman3]

I have a whirlpool ultimate care II and it will aggitate but not spin on occasion. When this occurs, I manually rotate the basin clockwise maybe 1/4 a turn. It becomes very tight to turn and it typically makes a click then it will spin. What part needs to be fixed? Thank you!

[@arleighreyna]

Thanks. My problem was the drain pump, but this video helped me disassemble and find the problem.

[@boatops]

My daughters whirlpool washer goes into spin cycle, seems to spins fast but clothes are wetter then they should be. Nothing is clogging the drain. Is it still a clutch problem?? Thanks

[@desktorp]

Steve is the God of Appliance Repair All Hail Steve

[@GrinningAssassin]

Its a Simpson eziset750, the tub turns clockwise so much then locks, and if I turn it anti clockwise it starts clicking.... while its washing, it agitates only in clockwise direction. If I hold the agitator and spin the tub it moves so far in each direction before locking(and no clicking). thanks for the quick response. Karl

[@LaxM]

Hi. Thanks for the video. After repairing my washer I found a part that fell out of the washer. I could not find out where it went until watching this video. At 6:41 you can see this part, a clear long cup that clips on to the frame. It is to the left of the transmission, right next to the empty hole along the edge. I am trying to figure out what this part it for.

[@gamediva2112]

I was wondering about these as well?

[@rp22248]

Those are shipping pins used when shifting the washing machine after the washing machine is set up they disconnect the shipping pins from the tub and they fall into the little plastic cups they're not used for anything else you do not need them

[@joeyannece6197]

The hardest part was getting the cabinet back on!! Also, the little bolt at the top of the shaft rusted badly, an hour of fightingto remove.

[@JacanaProductions]

I have a large clunking sound the moment the washer starts, is this the clutch? When the washer comes to a halt it was also making a thunking sound. The sound only happens for 1/2 a second or so. The machine works fine otherwise.

[@1967ERNIE]

Hi PartSelect my washer is Whirlpool,wash and Drain but will not spin the lid parts is ok ,direct coupler is ok,please help me.!! could be the timer?to star the spin i have to lift the lid and close then spins...... Thank you

[@goodcyrus]

Great video! Thanks a million! But how do we know if tge problem is the motor, coupler or the clutch assembly? I hear the motor but nothing moves including the coupler. Can help it move by hand a little as if something is stuck or motor has no torque.

[@rfn944]

Anytime the motor is turning, the motor to transmission coupler should also be turning. If not bad coupler.

[@stevenschnelz6944]

If you start it by hand and it sort of spins, it is the clutch.

[@txmgarygygax]

My washer Whirlpool Washer LSR6332KQ0 agitates but will not spin. I also smell a faint burning rubber smell when it tries. I can prop the lid open and spin it by hand, which after going fast enough performs a normal spin cycle. My question is: what part of the clutch broke? Do I need a whole new clutch or just the clutch band?

[@garytaylor5350]

Stuck on the bolt retaining the agitator. My washer has a carbon steel bolt which rusted and ruined the head. The socket would not grab. Trying to extract the bolt. May have to destroy the agitator.

[@markatr6]

changed my coupler,no problem,but it lost oil while tipped for a day,now it stinks up the place! no further leaking seen,but bad odor.is it oil or the coupler settling in? this seemed such an easy fix, but now theres a slight water leak at the pump too!any advice about that oil spill?

[@hughey974]

Our washer when it gets to the spin cycle won't spin however you can open and then close the lid and it will spin just fine. It does this everytime now. Does it sound like my clutch assembly or something else?

[@JamesArmstrong-mt4lu]

Perfect video. Just followed along with you and it came out great. Thanks!

[@IceTurf]

The black ring (the ~6" diameter black metal half that interfaces with the clutch) the break cam drive goes into, mine feels seized.... Can this be replaced, should it be feeling hard to turn?

[@b.g.3851]

I am not able to slide the shaft out. It seems to be stuck. Any recommendations?

[@ATLOffroad]

I used this video about a year ago to replace the clutch in my washer. The agitator worked and spun perfectly afterward. Unfortunately, my washer is once again not spinning. Is it common to replace the clutch after one year? Or is there something else that might be wrong with my washer. Thanks for the great video.

[@partselect]

A couple of parts might cause the problem you’re having. I’d start with having a look with direct drive motor coupling. Normal use will create wear on the coupling and eventually wear these plastic disks out. Inspect those to see if they are faulty or if your washer is belt driven then inspect the belt/idler pulley. If they are okay then have a look at the motor and transmission and make sure they are working properly. Did you notice any dust or burning smell when the washer was in use? That's a common symptom of a faulty clutch. We have information available on our site in our free repair help section. I’d suggest going through it as it’s quite helpful. Let us know if you need additional help and if so provide the model number.

[@volpe1970]

Great presentation and clear, easy to follow instructions. I'm learning so much from you.

[@ericmindy8929]

Hello I have a whirlpool estate washer, and i noticed that my clothes were still soaking wet when the washer has finished spinning. So I turned the washer back on to spin cycle and I can stop the tub from spinning with my hand very easily do I need a new clutch or a transmission? The model number for my whirlpool estate is tawx700jq1 any help would be a plus thank you for your time.

[@robertobryan9093]

I just finished replacing the clutch on my washing machine. Great video! It helped me do the job easily. One question I have is when I lifted the washer off its back and set it upright, there was the sound of a small metal object hitting tile. Lifting it back up I found a small gold color piece that looks very much like a common head nail, about 1.5 inches long, with a hold through the pointed tip that looks like something a cotter pin or retaining clip of some sort would go through to keep it in place. I set the washer on its back and looked all through it, but nothing seemed out of place. Any idea what this "nail" is for? Thanks again for a really great video!!

[@Jabelivy1]

how can you diagnose whether its the clutch or transmission that is broken? My washer is making a loud buzzing sound and nothing is spinning or moving.

[@SkynetT800]

Change the coupling because it was broken And I checked the clutch And it was hard to move I suppose that's good. What else could cause The rinse cycle Not to spin.? Transmission?

[@georgeelmerdenbrough6906]

My washer has pan on the bottom . Looking for a video that addresses that . I am trying to keep things as mistake free as possible .

[@larrycox2262]

I ran into a problem that I never expected. There should be a video about this! The direct drive couplers in newer machines have steel shaft bushings. The older had plastic. I had a bad clutch and got to the coupler the half attached to the Transmission had a crack in the plastic. I tried to remove it. The bushing had seized to the Transmission. I used WD40 and soaked and pulled over a period of hours. The thing would not budge and all the plastic was destroyed up. I tried to pry it lose the seal in the transmission came out. In hindsight I should have drilled the bushing. I prefer the plastic couplers.

[@partselect]

Hi Karl, Can you provide your model number? Is it working properly other than the clicking noise, or is it presenting other symptoms as well? Thanks a lot!

[@JohncyBloomhunter]

Steve, you're awesome. Thanks so much. A little hard water wear cleaned a new clutch part, agitator kit and coupling and I am back up in little time and lots less spent. :) cheers ! Happy

[@100pair]

HELP!! Everything works but the spin cycle. I replaced the clutch. However, the drum only spins on the spin cycle when I have the washer laying on its side . When I stand it back in the up properly, it does NOT spin anymore. Why is this?

[@hyper73212]

I posted on another great video of yours about the agitator not spinning with the drum during spin cycle. I thought maybe belt, only to find its a direct drive motor. I guess that helps narrow it down lol.. I took the washer agitator off completely to observe it during spin cycle and noticed that grooved shaft does not spin, tho the metal disc and plastic base does spin. Watching this video, it seems the next logical step would be to try this, do you think so? Thanks so much

[@Chuck--]

I'm stuck, the clutch assembly will not pull out. It slides out about an inch and a half and stops abruptly. I sprayed WD40 on the area around the end of the shaft inside the tub but no help. Any ideas?

[@MrArbyman1]

HI,JUST WANTING TO REPLACE MY CLUTCH ON MY WASHING MACHINE ITS A WHIRLPOOL FROM 1987 WORKS GREAT. I TOOK BACK PANEL OFF TURNED IT ON ITS SIDE TOOK PUMP OFF AND MOTOR,AND THREE TRANSMISSION BOLTS DID I MISS A STEP BEFORE OR DURING THIS PROCESS>>

[@partselect]

What's the model number of your whirlpool washer and I'll see what installation instructions are available.

[@kristinjordan5782]

I just did this and the washer is working great now but there’s a horrible burning smell that wasn’t there before. Anyone have suggestions? I know this is an old video.

[@josephperrone2556]

steve great tutorial! is it possible to mention the symptoms of the problem to your tutorials?

[@zkasky21]

Thanks for the video . It was very helpful. $25 DOLLARS VS $2000 for new washer and dryer

[@KB-gc5dd]

What a great instructor! Made for a smooth repair!

[@kenchrist6219]

I have the exact same issue as dcanimaltube above-- raising/lowering the lid causes the spin cycle to engage- otherwise it continues the cycle without spinning, though the water is dispensed correctly (resulting in wet clothes). Is that definitely a clutch issue?

[@246cjoe]

I have a Maytag washer. When it got to the spin cycle it just quite and left water in the tub. When I tried to recycle the start button to spin it would only move the tub about an inch and a half and stop. It seems to want to start but it quits. What do you suggest sir?

[@vancass1326]

help-i’ve attempted to re install the cabinet and have had no success. i see the tabs where the back of the cabinet locks, but i cannot attach the cabinet to the frame

[@awunidennis5251]

Please my front load washer is showing F11 when I put clothes inside the mashing after the F11 the mashing will stop please what should I do

[@johnruss5473]

great video !! my washer goes out of balance when spin cycle starts, however the tub seems to be in balance but the motor is moving around. Any sggestions?

[@dc_animal]

Thanks for the great video! My problem is, if left unattended my washer drains but fails to spin. However, if I hear it draining the water and then raise and relower the lid, I hear the drive engage and the spin cycle will actually start. To me, it sounds like some sort of clutch issue. For $20, it can't hurt to replace it on my 15 yr old washer. Thanks again!