I tried the sugru tip, and it works perfectly! My down tube is tapered, and I had to build up one side to make the sensor parallel to the magnetic ring. I also used zip ties with sugru. The sensor stays perfectly in place over bumps, bad roads, etc. Thanks!!
@tlarent6330 Жыл бұрын
Thanks for showing your trial and error. I found this while looking for a solution to attach a sensor on a step through with nonstandard frame size and angles. Really helpful!
@kenttran52894 жыл бұрын
Those sensor are smart; able to differentiate forward or backward peddling. I was not aware that there is a distinction with these PAS but upon looking closer, the kit has option to specify what you want. I would go for the PAS on the ring side because it is more difficult to knock it out of position and hidden from view. One tip. The old BB (bottom bracket), the right and left side is slightly longer then the other, at least on my Dahon 2002 model.
@Nougatti1235 жыл бұрын
I had to put the disk at the right side due to the lack of free space between the crank and the frame. I’ve bought a KT-D12R sensor and fitted it on the right side. I have to keep the setting on the swytch-controller on ‘run forward’. It works perfect and actually looks better since the PAS-disk is neatly tucked away next to the crankset.
@CTheSlayer4 жыл бұрын
How is it so far running Swytch with the sensor and the disc on the drive side?
@Nougatti1234 жыл бұрын
CTheSlayer Still running fine after 1 year. I often go mountainbiking without the kit (Changing my front wheel, removing the bag and alligning my disk brake takes 3 minutes), and you hardly see that it’s not an ordinary mountainbike. I wonder why they don’t sell all their kits with the disk fitted on the drive side! :)
@CTheSlayer4 жыл бұрын
@@Nougatti123 I have contacted Swytch and they have told that they know of no one using alternate PAS sensors and according to them, people have had no luck switching to the right side. Perhaps it's because drive side sensor users are few and have not been very vocal about their own setup. Your feedback about your experience is refreshing. Thanks!
@Nougatti1234 жыл бұрын
CTheSlayer I have bought this sensor: torquetech.co.uk/products/electric-bike-12-magnet-easy-fitting-split-pas-pedal-assist-sensor-cadence-speed?variant=10207999623215 The tricky bit is that I had to cut and solder the original connector to make it work. If you find a way to give me your mail adress I can send you some pictures of my conversion. Kind regards
@CTheSlayer4 жыл бұрын
@@Nougatti123 I got this www.electricspokes.com/products/pas-sensor-right-side-mount. I believe it's the same connector provided by Swytch but for the drive side. I also got a 12-pole split ring that can mount on the chain ring (smile.amazon.com/gp/product/B07BNCYTLT/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1). All this is theory until I get my kit, of course. I'd love to see your setup. deliciaevehementi@gmail.com
@dm936273 жыл бұрын
Very helpful, I need to fit a pas to a hollow tech 2 crank in a carbon fibre frame, where there is no gap.
@brianday5211 ай бұрын
As do I 😊 did you manage it❓️Is there a way to secure the magnet ring with NO gap, I've not seen a way yet, I've ordered my Swytch Bike kit....I've also got to buy different forks too...
@rickp76833 жыл бұрын
I hot glued my sensor ,the put zip ties around the glue, been working great so far,
@davidhughes8030 Жыл бұрын
Great informative video . Only had my Swytch Bike Kit a week and been out once on it and was inicially impressed, but after about 9 miles my motor would stop for a few seconds and restart for a while, this was happening mostly on hills, some steep. I did have my Max power pack on all the time which was probally wrong. Did check my disk and censor incase they had got splashed with muddy water or was slipping on the crank shaft, they seemed ok. As it was my first time out with it i don't know how it feels when the battery is almost spent. I did plod on for another few miles under my own steam by which time the battery was completly dead. Maybe i should only put the power on when approaching hills, also i found when freewheeling down hill with the power left on, the motor was acting like a magnetic brake and slowing me down, they didn't tell me about this, as far as i can see i will have to keep switching the power button on and off all the time to make the kit work efficiently, ( a right pain ) there is no way i will get 32 kms out of it where i live, as they claim. Time will tell.
@leepspvideo Жыл бұрын
I did a load of Swytch videos Swytch Kit & EBikes kzbin.info/aero/PLMJAjiTgBtFmx25QbcpCw97D6LiljrE_S I don’t experience the resistance you are getting whether my Swytch is on or off
@MrTanahmed3 жыл бұрын
Also had a problem positioning as not enough of a gap between frame, magnet and PAS! A more slim line PAS needed. Had to remove the clip and the rear cover of the PAS for it to fit! Then gorilla tape to secure. Hoping water ingress isn't going to become an issue!
@DavidEndry Жыл бұрын
I have the same issue but Swytch eventually responded to my support emails with a solution they will send out. Their "v12" design PAS comes on a ring inserted between the frame and physically detached pedal arm. We will see if this works.
@johnhealy92313 жыл бұрын
First ebike I bought whoosh sirocco sport ,the pas where glued to the chain ring
@bert-the-cosh74933 жыл бұрын
The PAS has 2 working sides for each side of the crank!
@brianday5211 ай бұрын
Great video thank you 😊 Is there a way to secure the magnet ring on the left side with NO gap❓️My bike is a 2010 Full sus Trek Fuel EX9.9 Carbon. I've not seen a way yet, I've ordered my Swytch Bike kit....I've also got to buy different forks too...🤦♂️
@leepspvideo11 ай бұрын
This solution I used on my Scott May work kzbin.info/www/bejne/a17ZeGWafZWifsksi=3Fzo6n3jz0jafk6S This company sells 4 different pas sensors that may work Convert your bike to Electric. Sub £400 DIY Ebike kit. Yose Power kzbin.info/www/bejne/pqSXmIGuhrFojck
@rstjx3j1832 жыл бұрын
Interesting. Just thinking out loud. With those struggling for space on the chin set side. What’s wrong with using the other side, that nothing attached and more room? Is this a given across bikes? Thanks.
@lifesabattle2 ай бұрын
Simply, working surface supposed to be on the sensor side.
@williamvan9093 жыл бұрын
Out standing videos 👍👍 buddy good information to know thanks 😊
@MyBanyo4 жыл бұрын
Thank you so much
@johntickle3120 Жыл бұрын
I had to fit a spacer from mounting ring bracket to the sensor to give me the 3mm gap to the magnet ring. All good but I dont have an lcd computer what is the best way to turn off the sensor. I think there are 3 wires so how do i disable the sensor. I'd likr to control it with a switch but not sure which wire pair to switch. Thanks for the video.😀😀
@leepspvideo Жыл бұрын
I haven’t tried adding a switch. I was going to try with a vintage gear shifter to move the sensor far enough away to make it stop. Then move it closer to switch it on. Using the front mech.
@mamisuzuki1770 Жыл бұрын
I appreciate your video. I have my old swytch bike with magnetic disc next to crank and working fine. I got another one for my son to do the same exact installment, it does not work for his bike. It does the same exact result as yours. If I buy pas sensor - right side mount, would it work?
@leepspvideo Жыл бұрын
If you can change the settings it should work. I think there was an option on the original lcd display kit. This bike was fixed with sugru SWYTCH kit Full Suspension Ebike conversion kit Build 3 1999 Kona Stab kzbin.info/www/bejne/l6WagpWtrdJmqdU The video shows how the rotation angle of the sensor makes a big difference.
@mamisuzuki1770 Жыл бұрын
I tried changing the setting as you did and the same result. I do not want to have a magnetic disc on the left side since my son is 11 and it would be so easy to knock it out unexpectedly. I tried the different angles of a PAS sensor, so it is not something to do with the angles per se. I am not able to connect with Swytch customer service to help me out with how I am able to work the magnetic disk on the crank side like my old bike.
@szymontereshchenko74799 ай бұрын
Good evening . And how many BETTER magnets should this sensor have!? I have an older model bike; / There is NO on-board computer, only a small board with LEDs. and its natural PAS sensor consists of only 5 magnets!!! / Today there are 8 of them and there are also 12 magnets. So is it possible to replace 5 magnets with 8? What will change!? Will there be problems later on the road!? Thank you .
@leepspvideo9 ай бұрын
Doesn’t matter too much. The magnet passes the sensor which engages the motor. 1 magnet would still work but if you are pedalling slowly the motor would come on less
@szymontereshchenko74799 ай бұрын
@@leepspvideo DANKE!
@roncooke21884 жыл бұрын
What would happen if you try a magnet pickup from a magnet on a rear wheel spoke magnet.i have done it with other makes but not tried with Swytch yet
@slidingdownthehill5 жыл бұрын
Thanks, very useful. I have this exact problem with my kit, and can't access the swytch group.
@leepspvideo5 жыл бұрын
The group is full of really good tips. Hopefully you’ll be allowed access to it soon.
@originaltruthfairy66263 жыл бұрын
My crank wont come off, the threads started peeling instead.
@jaysenjohnivanturner19725 жыл бұрын
your sooo good! come see? how good.
@adrianstealth3404 жыл бұрын
Can’t 2 of the 3 wires be swapped over for running on the other side if needed surely that’s the only difference between L & R sensors
@wastedWizard5093 жыл бұрын
setting for lcd 3 display? if i paddle backwards the lights blinks but the motor does not spin can you help me please?
@leepspvideo3 жыл бұрын
Sounds like it’s on the wrong side
@alireza0715 жыл бұрын
Does this pas works with any controller or just kt controller?
@leepspvideo5 жыл бұрын
As long as the magnets pass the sensor you should be OK. Others have used alternative PAS discs with different amounts of magnets and had success.
@roncooke21884 жыл бұрын
battery makes it Heavy on your steering
@mannycweiss30532 жыл бұрын
i got so confused i ikept hearing subaru...im like..is that some kind of joint effort with subaru like maybe ebike racing etc...lololo
@kaypea48743 жыл бұрын
this is a BIG problem... when you get it its ok but rotten solution, has to be a better way!