HUGE | 5-inch DPF back @bankspower Monster Exhaust - WOW

get ALL Banks PER Square Inch!!! kzbin.info/www/bejne/mZu4ZmunoMmKZ7c
This might be the rear booty jewelry you need for YOUR truck!! Welcome back Superduty family, follow along with us tonight where we @bankspower -ed this new 2022 F250 CCSB HCP XLT
THANKS so much for watching each weeks episode, means a lot. Let me know below friends & tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE #fordtrucks #modified #fyp
Join this channel to get access to perks:
kzbin.info/door/aRstJ35Lw6TvgTcekT2Z5Ajoin
Need something you see me use, I probably got it on Amazon. Use my link below to get PTT tools
amzn.to/3wGaElA
USE STORE CODE pttwarod-20
*****************************************************************
Check out our coffee LINE!!!!!!👈👈👈👈👈👈👈👈👈
society-of-auto-coffee-affiliates.peachs.co/a/PTT-w-A-Rod
*****************************************************************
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
******* www.limitlessautoworksLLC.com *******
**********************************
CHANGE YOUR Rear End FACTORY FLUID HERE!!!
kzbin.info/www/bejne/aGHXeIympsibfdE
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
kzbin.info/aero/PLO4T4Ez-ZZaTMgAD4t7-njlnv1DE5EjJk
6.7 Turbo Videos
kzbin.info/aero/PLO4T4Ez-ZZaTWC7_2otEwmyL-kYdy9oLP
6.7 Repair Videos
kzbin.info/aero/PLO4T4Ez-ZZaTa0Am9VK_YmKf6ZnP_vMMi
6.7 Engine Light Videos
kzbin.info/aero/PLO4T4Ez-ZZaR4OhM3c5aYXt6bYqCDxSE2
6.7 Maintenance Videos
kzbin.info/aero/PLO4T4Ez-ZZaRTfDvYWIpmaMSBvtIW7a-b
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: [e-mail]
Wanna send me something P.O. Box 531458 Livonia, MI 48153
Music: ------------------------------
Slynk - KZbin Audio Library
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email [e-mail]
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

[@bankspower]

Thanks ARod for the great install video! To address questions about performance gains, it's completely understandable why someone would think that adding a DPF-back exhaust couldn't possibly improve performance. But it can and here's why. Your turbo's compressor and turbine wheels are connected via a common shaft. The less work the turbine has to do to expel exhaust gas, the easier it is on the compressor, which means it can create more boost while using less energy to do it. Here's a good way to visualize what's happening. Put a drinking straw in your mouth and plug your noes. It's difficult to breathe through the straw, but it is possible. Now add a few lengths of straw and try to breathe. Your lungs are not strong enough to overcome the backpressure. Now imagine increasing the diameter of those drinking straws to an inch. Now you can breathe with almost no effort. Increasing the diameter of the exhaust appears to the engine as shorter length of tubing. Remember, the engine only makes power on one stroke; the power stroke. The other three strokes consume power. If you can reduce the energy consumed by the crankshaft to expel exhaust gas during the exhaust stroke, you've liberated otherwise lost horsepower.

[@litoaykiu]

Nice sales gimmick, but this is not dual exhaust system, you are still running thru same restrictive straw (DPF) you just enlarged it one end. If you want power get rid of DPF first. This exhaust is purely for change of sound and looks not performance.

[@PowerStrokeTechTalkwARod]

Sounds like you need to come out from under your tin foil hat there qwerty warrior

[@litoaykiu]

@@PowerStrokeTechTalkwARod I agree, tin foils are nice and shiny; makes them feel immune to laws physics and think of governing racing bodies that mandate restrictors on race cars as bunch of clowns. Whether restrictor is upstream or downstream is still a restrictor; laws of physics can't be ignored.

[@PowerStrokeTechTalkwARod]

Have a good day

[@zekester1]

​@@litoaykiuI'm sorry that your missing the whole point!..this product & others in the Banks Power line up are designed to enhance your OEM vehicle & still meet emissions regulations!!...Gale Banks knows how to improve performance he's been in business & racing since the 1950's

[@mikegonzales1564]

I did the install and left the hangers on the truck and just pried the old exhaust off came off with no problem. Banks products are the best ..

[@PowerStrokeTechTalkwARod]

BEST!!!!! @bankspower product you can buy NOT just for you Ford!!!! kzbin.info/www/bejne/oqiVd4uqbNR9apI

[@Uncle_Fester24]

Thinking about pulling the trigger on this! Great Video appreciate being able to hear what it would sound like.

[@herveyforward5956]

Thanks I'm getting sick of the double tips! Wonder if the DPF heat will destroy that nice black finish. Say what was the final adjustment when the tip was hanging low. That was a flash forward? Just a loosen and re lift the back pipe ?

[@vincer8691]

I have the same cat back. It makes manual regen so much faster. And it looks so much better than the stock pipe.

[@bobj8896]

Looks Sharp and clean.

[@Dmp241]

Good stuff man thank you

[@MR-si1eq]

Ok. I have to ask. Why did we change this out? For looks, sound, MPG, hp, broken?

[@JAG6.7]

I like my stock dual tip. Can it still fit on the banks unit?

[@Maniacal_Saw_Works]

Those sensors are almost impossible to get out if you’re from the north. Luckily I only needed the one to monitor egts on my monitor.

[@magnuseriksson5721]

That look very nice

[@markhenderson2896]

Great video

[@roscobear6143]

If you remount those hanger brackets before you set the pipes in it's a lot easier with nothing hanging from it

[@JMSynthetics]

Is there any adjustments in the rear section of the pipe to bring the tip closer to the body line? My biggest gripe with most aftermarket exhausts for these trucks is either the tip hangs to low or too far out or both.

[@PowerStrokeTechTalkwARod]

Yes absolutely

[@ck3561]

Love mine 22 f350 Banks 5”

[@ColtonBlumhagen]

Here in Canada we take it all off.

[@10Gauge]

Here in the USA those of us that aren't pussies do that too :)

[@dannybraun4672]

I prefer the dual tip setup from factory. Looks better in my opinion, I understand the reasoning behind why it's done, however I would keep the factory exhaust tips if that is possible

[@TheKing-nu4fk]

I do too and have been on the fence loving the nice dual chrome tips but they degrade very fast. It's getting harder and harder to bring them back anywhere close to factory. Plus it's a thousand degrees and burnt my 3 yr old daughter's hand after I parked and had the truck shut off for several minutes. I couldn't believe how hot the stock def-back gets! This will be nicer and better for the health of the truck over time.

[@shanetaylor7581]

Love my 5”

[@tylermurphy4020]

that tip shape is so nice compared to what was "cool" several years ago

[@zachwalker5085]

I went with the 5 inch from the down pipe option

[@tdotw77]

👍💥💨💯🛠️ Sounds so nice that way!

[@maybebad1239]

19:30 That sensor nut is suppose to spin and not the whole sensor, if you tap that nut with a hammer you can break them free sometimes and then your not twisting the wiring harness for that sensor

[@PowerStrokeTechTalkwARod]

Yea I know, it's michigan shit juss winds up siezin up anyways

[@roosterTx]

I have this pipe on my 17 kr it sounds good.

[@d.williams6891]

Pair that with a straight pipe and reputable tunes and, ooohweee! 🥴

[@markmcaleer1376]

I have a 2022 F250 KR with the 6.7 with 8.000 miles, What if anything will this exhaust system do to my warranty ? Or is this stuff at dealer discretion as long as you not eliminating anything? Thanks A rod. Keep up the good work!

[@AndrewMcSpadden]

It will not void warranty. There is a sticker under the hood (from ford) that even says that. They have to prove the part caused a malfunction

[@jonmoyers7620]

What happened to the cool cuff design? Was that all a bunch of hot air??

[@6582rg]

If there's no performance enhancement it seems like such a waste of money.

[@bankspower]

It's completely understandable why someone would think that adding a DPF-back exhaust couldn't possibly improve performance. But it can and here's why. Your turbo's compressor and turbine wheels are connected via a common shaft. The less work the turbine has to do to expel exhaust gas, the easier it is on the compressor, which means it can create more boost while using less energy to do it. Here's a good way to visualize what's happening. Put a drinking straw in your mouth and plug your noes. It's difficult to breathe through the straw, but it is possible. Now add a few lengths of straw and try to breathe. Your lungs are not strong enough to overcome the backpressure. Now imagine increasing the diameter of those drinking straws to an inch. Now you can breathe with almost no effort. Increasing the diameter of the exhaust appears to the engine as shorter length of tubing. Remember, the engine only makes power on one stroke; the power stroke. The other three strokes consume power. If you can reduce the energy consumed by the crankshaft to expel exhaust gas during the exhaust stroke, you've liberated otherwise lost horsepower.

[@willb7975]

Completely understand the airflow and pressure comparison...however, that DPF and its internals not helping that flow prior to reaching the DPF back kit. Not an engineer, just a realist..tks for the vid arod

[@Maniacal_Saw_Works]

Certainly helps if there’s an empty pipe inside your govt space shuttle

[@PowerStrokeTechTalkwARod]

Banks did the testing with the DPF and achieved there readings. I didnt think it was possible either

[@6582rg]

@@bankspower Thanks for the response Banks! Really appreciate that. It makes sense.

[@timf6916]

Nice

[@pt0wnweaver227]

Just watched this looking for advice for my 13 6.7. Banks doesn’t appear to have a 5” that I’m looking for that runs straight from the down pipes. Any suggestions where to look?

[@PowerStrokeTechTalkwARod]

No

[@zekester1]

The Banks exhaust lowers the back pressure which allows the gases to be expelled more easily and thus the engine run more efficiently...since the piping is bigger the sound has a lower deeper tone...also the piping cools down faster which allows the turbo cool off faster too ...before the Banks exhaust my regen's had soot levels between 92% to 100% with no passive regens... after Monster exhaust installed regen's now have soot levels @ 50% to 70% with many passive regens...performance can be measured in many ways not just by laying down rubber.

[@kernmw10]

There's literally no sound difference between a stock exhaust and a DPF back kit.

[@zekester1]

@@kernmw10 Hey, the sound is generally the same but the tone on mine is a little lower/deeper

[@Just_Fishing_TailsTM]

"also the piping cools down faster which allows the turbo cool off faster too " LMAO.....okay.

[@zekester1]

@@Just_Fishing_TailsTM You can laugh all you want...I monitor my turbo temps & after Banks exhaust install it take less time for the turbo temps to come down vs the stock exhaust...have a good one👌..,later👍💪💯

[@Just_Fishing_TailsTM]

@@zekester1 What is the exact PID you are monitoring?? Cause the DPF section is WAY too far from the turbo turbine section to make any significant effect on the turbo cooling down "faster".

[@357penneau]

On the banks web site, they say this will not fit with a gooseneck hitch. I have the factory 5th wheel prep kit. I only tow with my fith wheel, will this fit 2020 f350?

[@tater0909]

Pretty sure the truck in the video has the factory fifth wheel

[@pig9r]

Any info on the Banks Derringer that has been listed as “coming soon” on their site for the last 3 years for the ‘20 and up 6.7’s???

[@PowerStrokeTechTalkwARod]

On it

[@carlosmedrano3549]

I know right been waiting for it but no update on it

[@srwell1689]

just received an update today from banks saying soon,that it is going thru the last stages

[@carlosandrade7439]

Not sure if I missed it, does the 5'' clear the factory fifth wheel hitch?

[@PowerStrokeTechTalkwARod]

Si

[@gypsyhater96]

What banks exhaust would fit a 21 250 tremor with airlift bags, and 5th wheel hitch ?

[@PowerStrokeTechTalkwARod]

This

[@powerstrokemaintenance]

Great video! That’s a nice pipe!

[@sgtaaronp]

I bet that would look amazing on a 23 tremor

[@tekman196]

Won't fit . It hits the factory spare 😮. I had one on my 22 . I just took the tire off and put it in the bed !

[@PowerStrokeTechTalkwARod]

Yes it will. Maybe you missed that part of the directions

[@sammy9452]

When is new cp4 replacement video going to happen.

[@PowerStrokeTechTalkwARod]

Thursday

[@roastbeefoffroad]

what brand of flex socket are you using to torque down the nuts?

[@PowerStrokeTechTalkwARod]

Those are cornwell med deep wobbles

[@roastbeefoffroad]

@@PowerStrokeTechTalkwARod thank you sir.

[@drillagent]

Banks says I can’t get one because of the gooseneck hitch. Has anyone tried fitting this on a truck with a B&W Turnover Ball?

[@PowerStrokeTechTalkwARod]

Nope sure havent

[@vincer8691]

Did you notice a power difference?

[@Mark-qb5ip]

Had this on my 2022... Not impressed, no noticeable change in any performance or sound... I Actually put my OEM from the DPF axle back pipe back on the truck after having it painted in Ceramic High temp Black... I get more compliments on the OEM in black than the banks pipe...

[@6582rg]

How's the Ceramic Black holding up on your rig?

[@Mark-qb5ip]

@@6582rg It took a rock chip hard on a gravel road and its like a scratch. No chipping. I did prep the pipe hardcore including , cleaning and scuffing and then high heat ceramic primer and to finish it off i used a high heat ceramic clear coat. Looks nice and if it ever needs to be touched up i will just dab on some black but so far its all good including the underside.

[@joehall2633]

Wanna sell your old pipe?

[@Mark-qb5ip]

@@joehall2633 sold it 5 months ago

[@rbrooks5766]

That's what matters, compliments

[@WeekendHobbyMechanic]

Did you ever see anybody cut off the Stock resonator?

[@mikz86ta1]

Yes, there's a guy on YY that did it. Had a shop weld in a section for like $40 if I recall. Wasted $ because he had no sound difference basically inside or out.

[@WeekendHobbyMechanic]

@@mikz86ta1 Ok thanks....

[@outbacker292]

Just ordered one for my durtymax. Got to get ride that ugly tailpipe and keep it from blasting hot exhaust (during regen) on my trailer.

[@onlygreen2261]

Banks on their website says cannot go on a truck with gooseneck hitch, you proved that false……….that was the only thing holding me back! Ordered

[@alexhatchard6750]

Dpf back is such a waste of time. All the restriction is in the dpf and scr. Plus killing the motor.

[@F35JSF1]

yes restriction is still there, but you are getting rid of the restriction that's after the DPF assembly. it all adds up, plus there is proven gains just from this small mod, not major power or anything but efficiency.

[@666_Jesus_sucks]

Any noticeable sound difference?

[@PowerStrokeTechTalkwARod]

Yea coupled with his intake, you can here a lil deeper intakey noise

[@TonyBenton0728]

I put that on my 2022 F 450 it seemed to make it a little quieter before I put the ram air intake on . As far as performance improvement really can’t tell but it does sound more throaty now . And I do like the looks of the exhaust tip. Blends with the mud flaps. The pedal monster definitely made a difference in acceleration I have it set on sport #3 .

[@PowerStrokeTechTalkwARod]

A1

[@johnnyrizzo8057]

Boo hoo with the Banks! Sorry brother. I still thumbs up your labor!😅

[@tlfreek]

sounds like my wifes RDX

[@mxracer158]

Need to kill the DPF. I got that system and had zero improvement

[@erickwardwell962]

Need to cut the dpf off first. Have a nice day.

[@scottlincoln6286]

WHY NOT A 6.2L gas C O L D- A I R- I N T A K E for the 2017 super duper duty........ WHY

[@PowerStrokeTechTalkwARod]

Cuz no 1 likes those turds

[@scottlincoln6286]

Very bad marketing and sales decision @@PowerStrokeTechTalkwARod

[@douglashaussler4238]

Tip looks a little too "Fast and Furious, truck edition", if you like Honda styling on your F series go for it.

[@darweez]

Wish it was louder. Same tone as stock pipe 😢😢😢

[@PowerStrokeTechTalkwARod]

It is more noticeable with their intake on it.

[@mitzxx8995]

What junk my truck is not driven in winter. And the banks monster exhaust rusted out!!! Also it took out a $220.00 sensor

[@PowerStrokeTechTalkwARod]

It didn't take no sensor out. You can thank your environment for that. You know damn well that pipe ain't had nuthin to do with it "taking" out that PM sensor...

[@PowerStrokeTechTalkwARod]

...$220.00 you should be thanking you ever gave you a deal on it to begin with

[@artyfuffkin7805]

If it changes O2 output its emmissions tampering

[@PowerStrokeTechTalkwARod]

This has nothing to do with any sort of tampering & I can 100% ASSURE you of that.

[@artyfuffkin7805]

@PowerStrokeTechTalkwARod see if Ford will install it , all dealerships from the 80s on only replace cat back exhaust with stock

[@joehall2633]

​@@artyfuffkin7805 In this video, he literally is working for Ford while putting this on.

[@PowerStrokeTechTalkwARod]

Some of these commenters need to take their glasses off

[@PowerStrokeTechTalkwARod]

....yea well this isnt the 80s anymore

[@jasongriffin1127]

Really any performance gains…?? Not being a nay sayer. Doesn’t everything that effects performance happen from the down pipe and DPF? Not behind the DPF? Seems to be more aesthetics

[@traxxi2003]

These DPF back exhaust are useless and pointless. They do not offer any benefits other than the looks of a larger exhaust tip.

[@PowerStrokeTechTalkwARod]

Okay

[@majordanggle]

Looks nice but sounds the same 😢