just another day | Are you using XTool D9 - scan THIS

You need to check these out
• FORD 6.7 ENGINE LIGHT ...
Wireless Scanner?? Ya might like this one. What up DIESEL gang!!! We have been getting more and more scanners and this one is getting better. From pulling codes, data streaming or even some programming. I am going to try that soon. Is it pulling data from the Ford network? Lets find out together. Let me know below friends & tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE #diesel #xtool #checkenginelight
Need something you see me use, I probably got it on Amazon. Use my link below to get PTT tools
amzn.to/3wGaElA
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessau... ******
**********************************
CHANGE YOUR Rear End FACTORY FLUID HERE!!!
• FORD Superduty - Rear ...
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: [e-mail]
Music: ------------------------------
Slynk - KZbin Audio Library
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email [e-mail]
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

[@eurbanautotech]

Thank you for showing the power balance test. I have an Autel and it's slow to the point of being useless for anything other than near dead misfires. This is a huge feature for me. Sure wish it was a faster response time but I think I'm still leaning towards the XTool over the Launch.

[@calholli]

I guess I'll be driving my 7.3L forever. :) I'll never get a truck with DPF

[@Nate-ph5gc]

😂

[@CPsGarage]

Good to have if your working on more than Fords.

[@akbychoice]

Wow! I had no idea there would be so many different connectors.

[@ramalberta3542]

I just purchase d9spro yesterday

[@WV591]

wish they would sell this without all those useless connectinos that nobody will ever use and charge 250 less.

[@jerryknorr679]

Looks like a nice tool have, thanks for sharing ARod

[@amnonbasson7565]

I would truly appreciate someone evaluating and reviewing the tool in a professional manner. By professional, I mean after having studies it and its performance capabilities and spectrum in depth and thoroughly rather than figuring it out ‘ ON AIR ‘. A few quick points I find problematic is the high number of vehicle it doesn’t cover for some reason ( for example 2002 Lexus ES300. Truly limited functional utility on a 2010 Mazda 5 and next to nothing USEFUL on 2000 Toyota Echo. One would think that at the very least it would be able to AUTO SCAN the VIN but so far I had to put these MANUALLY ON 19 out of the 31 vehicles I scanned . And it doesn’t seem to memorize these details as when you move from one test to another it asks you to input the VIN again - a major annoyance . Another HUGE blunder is the speaker volume . Even in total silence it is impossible to hear the sound on KZbin links one is referred to for the purpose of resolving an issue. And there is no connection to an amplification or headphone . However , the BIGGEST demerit for this tool is the LACK of any type of REAL TIME TECH SUPPORT. The ONLY thing you can do is to send them an email and pray that someone will contact you as they state in the user manual. A colleague that did connect with them mentioned that their tech support is in China, their English communication and comprehension sucked and he ended up back-and-forthing with them on email which took forever and sucked . I find that the battery life sucked …was said to last 6 hours but was drained completely after 2 hrs . Perhaps the 6 hrs was if on standby. Fortunately , it does come with a cigarette light charging cable . The range of the BT leaves a lot to be desired . Don’t expect to leave the remote in the shop or parking lots and sit at the AC’d office. And monitor performance . Linking to WiFi seems erratic. And reconnecting was not automatically or intuitive . The foreign cars connectors for non OBD2 vehicles is a waste of money and space . The price should be reduced and they should be sold as an accessories pack.

[@iam1smiley1]

I find a lot of what you say to be true but my battery lasts for days! I also watch vehicles outside from my living room with A/C no problem. Yes, I find it doesn't auto connect and missing a lot of tests....I prefer theLaunch x431 I was using at work a lot better and wished I'd bought one of those or an Autel $$$$

[@lisaalony415]

What scanner do you recommend?

[@fernandoleopoldomelladocor1392]

Exelente equipo, buen video.Saludos

[@scraplifetrashtocash4551]

Love my Xtool 9 pro. I making a boat load of money off people's cars. They don't trust dealerships here anymore. I also do smoke test with my Smoke pro. For testing evap leaks. A $100 vehicle for 10 minute test to track down the leaks. Also do turbo leak testing that hooks up to my smoke pro. A lisle 14 piece kit u can hook to the smoke pro. Our State is mandatory smog. So alot of Cars fail the smog checks

[@carlosenriquerivas2933]

Excellent review.

[@404notfound.....]

Is it auto authorized for chrysler products. Does it have topology?? Can it program systems/ modules?? Tks great video

[@jimmurphy5739]

My D9 shows topology. Just got it - haven't done any programming yet, but I explored the menus for one of my cars and it appears to let you modify some parameters.

[@rockynix7731]

I'll be buying in two more months..

[@magnuseriksson5721]

Really nice tool

[@ramalberta3542]

@powerstroke can you use that if you replacing ecm

[@myname604]

What would a guy lose if using a D8S or D9S? I've been getting a lot of electric power steering failures in Fords and Dodges roughly from between '09 to '15 over the past year and need clean functionality for resets and calibrations after repairs. Most of the time everything goes without a hitch, but one Ford Fusion that I replaced the torque sensor in needs reset and recalibration. But I also work mostly on older vehicles so I still need backwards compatibility.

[@imranabbasi7871]

Awsome bro 👍

[@nedindurakovic]

How much costs update after 3 years expired? Can be tool be used after 3 year? Or it will lock it self? Thanks

[@mikasantos3774]

My coworker just bought 1 today

[@dieseldave21]

Using a D8BT XTool

[@robinbasdeo6464]

do this scanner have ADAS in special function ?

[@iam1smiley1]

Yes but haven't tried it yet, just started at a bodyshop.

[@wildsnake6894]

I just paid 1200 to get my car put of limp mode...skeptical because my code reader said it was a throttle position sensor that shouldn't be more than $200 mechanic said it was a computer issue😏 but my car was is limp mode so can't really go to far so had to bite the bullet

[@PowerStrokeTechTalkwARod]

Code read, yea thats all it is. You paid 1200 dollars because of the tools and skill it takes. Sure, try it yourself

[@adriananthony7919]

Hi, can you please confirm if this is a D9 or D9 Pro?

[@dirtdiggler1980]

Does it come with or can it support the round 6 and 9 pin connector for heavy trucks ? Thanks Russ

[@cgonedfishing]

Love the large screen format or whatcha call it in the beginning?

[@PowerStrokeTechTalkwARod]

Android?

[@cgonedfishing]

@@PowerStrokeTechTalkwARod Tablet 😎💎💎💎

[@raheemkarim9942]

I am doing a engine swap , would i be able to change the VIN with this on like the modules e.g ecm , bcm , tcm , srs .... Ect ..

[@watchdogu.s.a.8973]

Yes - depending on vehicle but generally, yes.

[@DavidBowen]

I have a question about my 16 F-350. Where can I send you the question?

[@PowerStrokeTechTalkwARod]

Emails in every video description

[@geostorm9351]

What’s the difference between the D9 and the D9 Pro?

[@geostorm9351]

@bill Lucius that’s interesting considering how secretive the German lines are. I work at Audi. Would love to see if they can actually program an ECM. Don’t wanna spend all that money if when I need to do one it actually won’t do it.

[@stephendriver1]

Can you scope with it?

[@iam1smiley1]

​@@stephendriver1no scope

[@iam1smiley1]

​@@stephendriver1no scope

[@johnmitchell2741]

If you dont update it when it says to it shuts down and turns into a paperweight

[@PandaMan02]

their website says it works just the same.

[@iam1smiley1]

I've had that happen as well...tuen it on and update at least once a month.

[@TheRealSlowhand]

Hi A-Rod... Does Ford or the dealership issue you a scan tool or do you have to purchase your own?

[@PowerStrokeTechTalkwARod]

Either or.

[@LarryTints]

@@PowerStrokeTechTalkwARod hey 2015 6.7. 110k miles. Have a hill, descent control, fault and service advance track both lights coming on at same time. What do I do? What needs to be done never really used hill descent and do regular preventive maintenance

[@PowerStrokeTechTalkwARod]

Gotta pull codes papi

[@LarryTints]

@@PowerStrokeTechTalkwARod okay thanks you the man 🤟 had it since it was new so it been taken care of , one of the main wire harness that is connected to ebrake bracket under dash needed unplugging and replugging , worked its way loose enough to throw the code over the past 8 years

[@Gary_in_NoVA]

Looks like the D9 doesn’t have topology. Just wondering, do you use topology? Is it that helpful? (DIT’er, here).

[@iam1smiley1]

Yes, has topology

[@shaunwood301]

Do you know if the D8 does the power balance also. I am trying to find a good tool for my 04 with the 6.0

[@SilvexPhoto]

Yes it does

[@razvanturcu9871]

Does it allow for an sd card instalation to expand the storage?

[@ratchetrdz9113]

does this tool re-write any ecu? on all makes in this tool?

[@PowerStrokeTechTalkwARod]

No friend, no

[@AllServiceAutomotive]

Will this reset the number of restarts on a sprinter?

[@alial5647]

Is the vci J2534?

[@dane_jah]

Have you used the VCM lite?

[@PowerStrokeTechTalkwARod]

Yea. A waste

[@dane_jah]

@@PowerStrokeTechTalkwARod I was thinking of getting one since the VMC 3 is backordered for 6 months from rotunda but if it's junk them I'll just wait haha.

[@mikeoparaopara7697]

Please I want to know because my D9PRO dose not support Ford edge 2007 model ECU coding used one it doesn't support how can I do it

[@RainmanRaysRepairs]

First 😂😂

[@PowerStrokeTechTalkwARod]

Ray dadddy

[@codsupreme8670]

Could you please send me the about info of the device. Under settings and about. Im curious about something.

[@PowerStrokeTechTalkwARod]

I dont have that info...

[@codsupreme8670]

I have the d8 version and I wanted to see the difference between the 2. Mines: VCI,S+,6C,E2

[@patrickhoward4080]

So are you not able to program a APIM with it? Or can you reset to factory setting or reload the stock software? I did a download over WiFi for my ford fusion and it blacked out my screen. Someone told me the software was corrupt probably and it “bricked” it…aka..the module or computer shut it off. And I needed to unlock it. I checked the fuse, it was good. Also both usb ports aren’t working with powered either which is why he said he thinks it disabled it. I’m looking for a scan tool at I can use at home to reload/reset the software back to factory setting. I heard forescan was good too…but idk if it can program apims either. Please help me out bro! lol

[@PowerStrokeTechTalkwARod]

Not with this thing!

[@hookybull9466]

Help. I have the same Xtool D9 Pro and was trying to add a new key fob for a 2021 Jeep Wrangler Rubicon using Crysler 12-8 adapter. Was able to go through the process after security code and after several attempts kept getting the Program Failed pop-up. Then I accidently hit the Erase Keys button. Is there a way to back up and restore? I retried the program key procedure again and still got the same result.

[@PowerStrokeTechTalkwARod]

I am sorry, i have not used that function let alone on a Jeep

[@chidichukwudi4223]

Please does this tool program new keys on Chrysler

[@PowerStrokeTechTalkwARod]

Oooooooof good question. I stay in my lane & Chryslers are not in my lane

[@chidichukwudi4223]

Does it program used bcc nd used ECU on 2016 nd upward ford cars

[@watchdogu.s.a.8973]

Yes

[@FollowingtheCliffNotes]

Will this scan my bike?

[@PowerStrokeTechTalkwARod]

Yupppppp

[@FollowingtheCliffNotes]

@@PowerStrokeTechTalkwARod 😂😂

[@Tom-pn5sk]

Will it do any heavy duty trucks

[@PowerStrokeTechTalkwARod]

I dunno dont have any to check at the moment. I saw a 9 pin in there

[@iam1smiley1]

It didn't work on the workhorse motorhome I tried.

[@alaskalife7155]

I have the x tool d9 pro why can i get the f150 door codes for a 2004

[@PowerStrokeTechTalkwARod]

Maybe you're not looking in the correct module

[@jw3363]

Nice, do you know what they cost.

[@jonsmith5460]

How are they on the 6.0 powerstrokes specifically the ficm

[@PowerStrokeTechTalkwARod]

For what

[@jonsmith5460]

@@PowerStrokeTechTalkwARod ficm, sensors, etc.

[@jonsmith5460]

@@PowerStrokeTechTalkwARod are they similar to forscan?

[@PowerStrokeTechTalkwARod]

Yes brah

[@jonsmith5460]

@@PowerStrokeTechTalkwARod do you have a project you can show? 6.0

[@amokoikaw1]

How much?

[@PowerStrokeTechTalkwARod]

Look it up...

[@PatriotDad]

Do you think there is a need for the Pro version for a DIYer?

[@iam1smiley1]

The D8 has gotten a lot of upgrading lately and much cheaper. We're a small shop and use a D9 pro...it's ok but doesn't seem to recognize modules I think it should at times but a decent tool overall. You get more bidirectional with D9 pro, really depends on budget and how serious you are working on many types of vehicles or just a couple. Most DIY would be well served with D8.

[@PatriotDad]

@@iam1smiley1 thank you for the info

[@PowerStrokeTechTalkwARod]

ARE you doing this kzbin.info/www/bejne/jorQeZRpjtZmpcU

[@johnf517]

2018 ford explorer sport. P0171. Cannot solve. Changed everything. CIL always come back. Help?

[@PowerStrokeTechTalkwARod]

Feel free to make an appointment and bring it on through. There's a lot of testing that we would need to do to determine why we are running lean on bank one

[@johnf517]

@@PowerStrokeTechTalkwARod where r u located?

[@PowerStrokeTechTalkwARod]

Detroit