XTOOLS Top of The Line D9S Pro Scan Tool.

This scan tool is powerful and has 3 years of free updates. This scan tool also has powerful key programming abilities. The D9S Pro has amazing key programming capabilities and ECU coding and programming for BMW, Audi, Mercedes Benz, and VW. As well as Ford and Lincoln.
XTOOL D9S PRO Diagnostic Tool with BMW, Merc, Audi, and VW programming and coding.
amzn.to/4cqX3la
XTOOL D9S Automotive Diagnostic Scan Tool
amzn.to/3RVYhwC

[@737mechanic]

XTOOL D9S PRO Diagnostic Tool with BMW, Merc, Audi, and VW programming and coding. amzn.to/4cqX3la XTOOL D9S Automotive Diagnostic Scan Tool amzn.to/3RVYhwC

[@bestbuildpc]

Xtool is one of the best diagnostic tool nowadays! Really fast and no single problem.

[@404notfound.....]

Perfect! Well done, will be ordering!!

[@fernandoleopoldomelladocor1392]

Excelente equipo,de lo mejor multimarca.Saludos

[@johnjauregui3528]

Go with a US make and model scanner if you have older American vehicles. For example neither my 1999 F-250 PowerStroke 7.3 nor my 2001 Dodge Dakota are supported by xTool with no data profile update in sight.

[@737mechanic]

@@johnjauregui3528 Those should be supported but they may not auto detect, you have to manually input year make and model. That is a limitation of the manufacturers module.

[@johnjauregui3528]

@@737mechanic "Should be" but are not either by auto detect or manual. Clearly you don't speak from experience. Try a 2001 Dodge Dakota or 1999 F-250 7.3

[@737mechanic]

@@johnjauregui3528 Your right I don't speak from experience as far as those exact vehicles but the experience I speak from is on vehicles before about 2000 a lot of makes and models will not autodetect with any scanner and I have seen people think there machine will not work because it isn't auto-detecting the vehicle but the reason they don't auto-detect is because the manufactures did not program the modules so they could be auto-detected. Did you send a report to xtool letting them know the problems so they can fix it?

[@johnjauregui3528]

@@737mechanic Which ones before 2000? That might explain a lot.

[@737mechanic]

@@johnjauregui3528 It depends on make and model. That was around the time when manufactures started programming their modules so a scan tool was able to auto detect the year make and model before that you always had to enter the year make and model manually on all scan tools. My first scan tool was a snap on MT2500 and there was no auto detect on any car.

[@alaanaggar2892]

hi good jop . Can he xtool ds9pro make the unit ecu tcu pcm ecm a virgin as is the case in autel maxis

[@737mechanic]

It depends on the year make and model. I believe the same goes for the Autel also.

[@alaanaggar2892]

@@737mechanic good thanks frind

[@ratchetrdz9113]

will this xtool diag and clear codes for newest dodge vehicles?

[@737mechanic]

No, this scanner is NOT auto auth compatible. They make an IP919 that is auto auth compatible, but it is not available on Amazon for some reason. Launch makes a comparable scanner that is auto authority compatible here. amzn.to/3VQ09I8 Remember to be able to use any scan tool on Chrysler products after 2018 you will need to purchase an auto authority 1 year membership for $50 and have a scan tool auto auth compatible.

[@SMOKEY-JAYS-DIESEL]

​​@@737mechanic actually it does work on the newer Dodge ram trucks and cars. You just need a bypass cable

[@737mechanic]

@@SMOKEY-JAYS-DIESEL That is correct. The problem is accessing the module can be a real pain.

[@SMOKEY-JAYS-DIESEL]

@@737mechanic yeah it is a pain in the 🤷🏻‍♂️😂😂

[@737mechanic]

@@SMOKEY-JAYS-DIESEL When I received the Xtool D9S Pro I was under the impression that all Xtool D9 scanners were AutoAuth compliant so I emailed xtool and they confirmed that the the D9 Was NOT autoauth compliant and they told me that the only xtool scanners that were are the IP919 and the IP900.

[@imataylor8538]

Does this work on Buick encore

[@737mechanic]

Yes, it will work great on all Buicks.

[@OceanBreeze2022.]

Would this unit be any good for chev, ford, dodge, Toyota for model programming or immo

[@737mechanic]

For IMMO this scan tool has the best support than any other scan tool, the only thing better for IMMO is a dedicated key programmer, Ford module replacement yes. GM and dodge is year make and model specific.

[@phillipjlynch9340]

Will this scan tool work on the newer Dodge vehicles 2023

[@737mechanic]

No, this scanner is not autoauth certified but the launch x431 Pro3 ACE is and it is a little cheaper and has equivalent functions. amzn.to/3zAHqZH

[@SMOKEY-JAYS-DIESEL]

With a security bypass cable it works awesome

[@primosabong2875]

Is it available in Amazon? How much price? Thanks

[@737mechanic]

The D9S Pro is normally $1399.00 but it is on sale for $1099.00. amzn.to/4eQgFAM The regular D9S is the same price but it does have a $250 off coupon it looks like which brings it's price down to $849.00 amzn.to/4bDf3Hz

[@primosabong2875]

@@737mechanic thank you

[@ma-kuotobaivlog3759]

It is available at AliExpress?

[@737mechanic]

I am not sure.

[@alirezajafari7070]

It is available

[@AnthGott]

Yes but prices not much difference

[@gamingshitshow3826]

hello sir ..can i have your email or whatsapp i need some help with the d9?

[@陈陈桑]

maybe I can help you

[@gamingshitshow3826]

​@@陈陈桑 email?