PDR Lesson - crease dent - 🐳 whale tail

www.RealWorldPDR.com
Crease Dent - Whale Tail - PDR Skills. Watch and learn as we tackle this small crease door dent. Access was tight so a whale tail is our tool of choice for this one. This is not an absolute beginner skill but one that can be tackled early in your training! Thank you so much for the support, make sure to like and subscribe to this channel!

[@aristidescastillo8089]

Thank you for your videos you are very helpful I started this in 2003 and i still learning from Techs like you again thank you god bless always

[@0858Pinoy]

Thank you for putting out content and teaching me indirectly boss! Much appreciated 🙏🏼

[@danielm5386]

Your videos are great! what I found especially helpful in this video is you show the way you move the tool to get the dent out i.e - which part of the tool you used & the action to get the dent out. Very clear, thanks!

[@jaiminor]

Keep em coming Jim. Great job at explaining the how's and why's.

[@nelcinaramos9985]

Hi there from Rio de Janeiro, Brazil! I really like your videos and technique the best! Thank you very much!

[@UY_pdr2020]

Very good video!! As always, giving useful tips and sincere advices. Thanks!!

[@nathantanner8442]

Man, I own a small body shop in Tennessee. I do mostly dealer work. I'm wanting to add pdr to my shop. I have learned more from your videos than I could have imagined. I believe I can do this

[@RealWorldPDRTraining]

Hell yea. Www.realworldpdr.com That’s where we hide the good stuff. It’s got enough there to get you to your goal!

[@dentcopdr65]

Nice video Jim.

[@RealWorldPDRTraining]

Thank you very much!

[@amahaasla6367]

Hi, very glad to see your new video

[@kiarnastoon6475]

I really should have watched his video BEFORE I attempted the deep crease in front of my door brace...I have done a little bit of PDR in the past (the crease went the whole way along the door, the easier shallower section I have managed to fix ...) I literally did everything you said NOT to do..mosquitos were biting me, and I rushed in with chest puffed out thinking I was 'all that' and smashed the tool into that gap and ended up quite quickly making those last cpl inches ALOT worse..Tomorrow is another day. Im paying very close attention to this vid. Cheers sub added ;)

[@RealWorldPDRTraining]

Happy to have you! Oh course if you like hundreds of other tutorials like this. Check out www.realworldpdr.com

[@kimfrank7658]

Your the best tech I've seen on youtube, you explain things well, thanks.

[@RealWorldPDRTraining]

Thank you John! Check out Brice Kelley if you want your mind blown... dude is from another planet. I feel like I can stand toe to toe with about any PDR tech.... except that guy lol. It still makes me very uncomfortable when people say our names in the same sentence

[@DailyDoseMMA.]

Great video mate

[@raymondezell7378]

Thanks Jim great job.

[@taylrteix]

Great video!!

[@maj6150]

Im just starting out learning PDR and this video has been so useful. I was just getting frustrated as u could not finish off the dent, leaving a little pimple behind and snail trails. Having watched the video i feel i need to chill out and take it slow, i'm creating more work for myself at the end then i should. Thanks for the advice man.

[@klgdsht]

i really enjoyed watching this video and the tips you gave.

[@benygil4413]

Great video jim

[@pwgodfrey1]

GREAT VIDEO THANKS FOR YOUR TIME.

[@husseinelakkaoui2233]

You guys are very good man love your work

[@marktaylor6952]

Thanks jim another great video crease be gone

[@bradgreen6923]

Mate, this is brilliant stuff. These are the sort of PDR training videos I have been searching for. You explain everything you are doing in such a thorough manner, I can see the ex military manner coming through. Also your editing is getting better all the time. Great camera angles for learners. Cheers mate, well done.

[@RealWorldPDRTraining]

That’s amazing man! What a great compliment.

[@bradgreen6923]

You are welcome. You deserve it.@@RealWorldPDRTraining

[@nickpanico5441]

Thanks for the video and the tips .

[@RealWorldPDRTraining]

Thank you for being the first comment!

[@AlfredoHernandez-fh5fk]

Men i love the teach bro keep doing your fine craftsmanship work 👍👌

[@kimfrank7658]

Great job.

[@murathastaoglu2408]

Harika bir ustalık izledim ustamıza selamlar saygılar

[@KevinSandy2]

Thank you! In addition to being a handsome man you are a natural born teacher.

[@RealWorldPDRTraining]

😂😂😂 thank you Kevin!!

[@sametozturkler2860]

Elinize saglık faydalı vdolarınız başarılar

[@teamsystemalgerie]

you a re the best

[@TheHienax]

Good video but the music is to high and i can't hear you. Still, thanks to take your time to do a video ans share your experience.

[@RealWorldPDRTraining]

😀😀😅😅😅😂 sorry man, just a dent guy trying to learn editing... still some stuff to learn apparently

[@DaytonCarCare]

Yeah saw another video like that. Don't need the music with instructional stuff. Save that for drifting highlight videos. lol ;)

[@aristidescastillo8089]

Keep the great work you doing I love your videos I pay attention to what you teaching not the music your one of the very best out there God bless you and your family always

[@234dilligaf]

Agreed. I find the techno computer sounds distracting.

[@progi2]

Jim, great video with instruction and detailed explanation! Do you only use fog light in your repairs? Thankyouverymuch!

[@RealWorldPDRTraining]

I do, I’m not good at line boards so I don’t even attempt to teach it. Feel that would be disingenuous of me!

[@husseinelakkaoui2233]

I’m a new dent removal technician and would love to learn of you

[@RealWorldPDRTraining]

Join www.realworldpdr.com!

[@Debo952]

Could you have used glue pullers on this type of dent?

[@SmellyT0fu]

Would it be easier to remove the inner door card? They generally are quite easy to remove.

[@RealWorldPDRTraining]

Not really. This one being behind a brace would also not make it any easier. We have tools specially made for just this.

[@allenwilson6585]

I see the dents moving, the question I have is how do you determine where the point of the tool is? My imagination is not that good and my superman x-ray vision seems to be lacking. This is a lot harder than you make it look. Thanks for all the tips. I am still learning the craft. Thanks!!!

[@RealWorldPDRTraining]

Check out www.realworldpdr.com the lessons there will explain in depth EXACTLY how to use your light and see using your x-ray vision.

[@Beenhereawhile1001]

What do you do if it’s on a truck rear quarter panel that is double walled? Tried pressing from back but it’s too thick.

[@RealWorldPDRTraining]

Chances are more leverage is needed, because most trucks are single layered on the bedside, but very hard to move without good leverage. Take it slow. Easy to make things worse instead of better

[@Beenhereawhile1001]

@@RealWorldPDRTraining good call. Tough to get leverage where it’s at so I eventually gave up.

[@eddiesheeran5791]

This is really helpful to me, thanks for sharing! I put a nice long 36" crease dent down the side of my truck, so I want to learn PDR. I bought a tool-kit & have started to learn for myself. The dent already looks a lot better, but I'd really like to get it perfect. I don't mind how long it takes. I'm enjoying learning about everything as I go.

[@RealWorldPDRTraining]

Enjoy the process. You have to with PDR or it’ll drive you nuts!

[@mbbuleteknik7685]

Hi What light do you use?

[@RealWorldPDRTraining]

Hey there! I currently mostly onenthat isn’t available and is kind of a rarity. It’s from dent technologies, called the Ferrari.

[@DentFreeImagePeterVega]

Another great tutorial Jim! What branch of service did you serve? I am an Army Veteran.

[@RealWorldPDRTraining]

That’s awesome! Marine corps myself... This training was initially and will still be mainly targeted to veterans just getting out. I think we will offer discounts for video and in person training for vets!

[@pegleg1az]

I like your videos a lot for a newbie starting out you make it look so easy but I know it is not. The only thing I am not fund of is the ( music?). It makes it harder to hear you talking. I can not pick up low tones well, it just makes it harder.

[@RealWorldPDRTraining]

Im really getting scolded about the music this time! 😂🤣 gotta forgive me I’m a dent guy I’m just figuring out this editing thing! I’ll do better in the future.

[@mccoyhawkins4062]

How come you never glue pull? Just curious

[@RealWorldPDRTraining]

Glue pulling is much less accurate, any time pushing is an option, that should be what you do.

[@MrNickstevenson63]

Great video but if I may suggest ditch the redic music. Irritating as all Frik

[@RealWorldPDRTraining]

😅😅😅😅 you’re the second to say it, so...... ok I’ll turn it way down for the next one. Sorry to annoy! I’m a dent guy and I’m just learning this video editing thing!

[@MrNickstevenson63]

@@RealWorldPDRTraining love your work. Definitely keep posting. Not many techs have as much pride in workmanship as you do.

[@user-np2wf8pn2m]

Hello attach Please captions to your video...

[@RealWorldPDRTraining]

Working on it.

[@mistersniffer6838]

You need to get a new wife, one that checks pockets before throwing laundry in the machine!!

[@RealWorldPDRTraining]

Haha since that video I did 😂

[@brodavidb]

Good instruction, but turn off the obnoxious music so I can hear what you're teaching.

[@RealWorldPDRTraining]

Yea this was early in my video creating career. So sorry. Wasn’t great at video production and dents just starting out. I really apologize the free content wasn’t up to your standards.

[@camgreer]

Loved the info...not so much the music. It makes it hard to hear you.

[@RealWorldPDRTraining]

This was one of my earlier vids. You are correct I had the music turned way too far up in the earlier videos..... I think I was still dealing with that “everyone hates their own voice” thing. That hasn’t changed, I still hate my voice, but now I turn the music way down so we can hate it together more clearly 😂

[@user-xq3yg8mr6s]

YOU HAVE NO VOLUME

[@RealWorldPDRTraining]

I CAN’T HEAR YOU!

[@twoicyclops]

This got annoying really quick hard to focus with the music blasting 👎🏻

[@RealWorldPDRTraining]

twoicyclops id suggest some of the newer content. This is free, I wasn’t adept at editing when I made this, and there’s dozens more now. Your comment as a critique of free information was immediately annoying.