Penn Fierce 3, Battle 3, Spinfisher 6 review. Which is right for you?

My review of the Penn Battle, Fierce an Spinfisher spinning reels. I break down the features and benefits of these Penn reels and offer my guidance of which fishing reel might be right for you. I go over the pricing, weights, gears, and live liner options as well as give my personal opinion for the Penn reel lineup.
#Penn #PennReels #spinningreels
PLEASE SUBSCRIBE, LIKE, AND COMMENT
Follow me:
Instagram: @bitesandstrikes
Facebook: Bites and Strikes Fishing
---CAMERA GEAR---
GOPRO: amzn.to/3vdKBCg
GOPRO STRAPS: amzn.to/3rP1iSg
GOPRO BATTERIES: amzn.to/397ZD3D
SD CARD: amzn.to/3vdq290
TRIPOD: amzn.to/3LbQtRO
0:00 INTRO
0:30 PRICE
1:10 SIMILARITEIS
4:00 FIERCE III details
4:32 BATTLE III details
5:08 SPINFISHER VI details
5:40 CONCLUSION
As an Amazon Associate I earn from qualifying purchases.

[@dk2428]

I have the Spinfisher's in 7500 long cast version. Couldn't be happier, absolute workhorses, look the part as well and don't break the bank. Hat's off to Penn. *Coming from a guy who fished Shimano for 3 decades.

[@Radio48]

WOW , YOU HAVE COME ALONG WAY SINCE YOUR FIRST VID'S ! I STARTED WATCHING YOU FROM YOUR BEGINNING, I HAVENT BEEN ON KZbin IN A WHILE . GREAT REVIEW OF THE REELS FOR ME ITS SPINFISHER VI WITH THE LIVE LINER . 1.14 SUBS!!!! GOOD JOB I REMEMBER WHEN YOU ONLY HAD 500 .

[@BitesandStrikesFishing]

Thanks for the support! It's been a long journey and a lot of work but I'm loving it! The Spinfisher is a great reel, I use the Fierce more often. Just because I don't do much saltwater... yet

[@wraith3951]

Just went Pier Fishing this Summer and hooked a few sharks, now I'm HOOKED on Shark Fishing! Immediately bought all new, to me, gear when I got home in anticipation of hitting the beach again. Bought 1-Spinfisher 6 8500LL, 2-Fierce 3 8000LL, 1-Fierce 4 6000LL, and 3 new rods. I am not playing around when I go back to Wilmington this time! With the exception of the Fierce 4, all came off of FB Marketplace at half of the price of new. I'm Hooked!!!

[@BitesandStrikesFishing]

That’s a heck of a haul on some new to you gear! Let me know how they work out for you. I haven’t heard from anyone shark fishing with them.

[@willywhite2393]

Thanks bro . I've seen a lot of videos but yours was very straightforward and to the point which I liked. Thanks again and keep up the good work 👍

[@BitesandStrikesFishing]

Thanks! Appreciate the support! I try to make videos I’d want to watch. It’s a challenge

[@Johnleefromthemist]

great vid straight to the point just how I like it good vibes from San Francisco California USA

[@BitesandStrikesFishing]

Thanks for the West Coast support!

[@ttinnovations3310]

amazon or walmart has the Penn 2 battle 4000 for $55 or $65 , on sale now, which is a sweet deal

[@travisjae1775]

Thanks for the video, this helped with my new purchases penn 3 5000.

[@BitesandStrikesFishing]

Glad I was able to help, good luck out there!

[@illuminatigeometry2294]

love your work friend, 🤪

[@Fisherman_JMA]

Great video man

[@BitesandStrikesFishing]

Thanks! Trying out some new content for yall

[@michaelsullivan988]

I have fierce and Spinfisher VI both have worked well for me.

[@BitesandStrikesFishing]

They are both fantastic reels, can't go wrong with either

[@terryhancock]

Thanks for your opinion I like your opinion

[@BitesandStrikesFishing]

Glad to help out

[@robdishjr4912]

The battle also has sealed ball bearings. While the fierce has shielded.

[@illuminatigeometry2294]

it's been a while since you broke some world records 🥵

[@rsos8541]

Great job

[@BitesandStrikesFishing]

Thansk!

[@thevernonposse]

Fierce have a big cast gear but you can swap it with the battle cnc as long as the gear ratio matches had a 100 lb yellow fin strip half the gears right off my fierce 8000 and had to replace it

[@BitesandStrikesFishing]

Damn! Stripped off the gears? That’s nuts. I’ve caught some large alligator gar with them with no issues. But I did recently have the gears break on my 3000. Partly my fault, the handle got jammed and I cranked it anyways. I knew I shouldn’t have

[@tunanorth]

@@BitesandStrikesFishing The difference between a yellowfin tuna and an alligator gar is substantial.

[@chevoofthechevo924]

I have a fierce 3 6000 on a 9ft rod and also a fierce 3 8000 on a 10ft rod is both for surf fishing and man I love them both so smooth I just recently got the 8000 about 2-3 months but the 6000 over 2 years and I’ve brought in many sharks with it no complaints from me!

[@BitesandStrikesFishing]

They are great reels. Shark fishing is something I want to get into

[@chevoofthechevo924]

@@BitesandStrikesFishing you definitely should and save some money from buying all these big reels unless you do want to bring in some huge ones but other than these type of reels will get the job done

[@BitesandStrikesFishing]

@@chevoofthechevo924 It's on my list of species!! I use these reels to target alligator gar and they can get up to 300lb. These work very well for gar

[@imbrandon16]

I wanna fish off the pier at the beach, should i get a 10 ft rod or a 7 ft i'm looking at the penn fierce IV spinning rod, and i was gonna get the 8000 reel. only $139.00 each at bass pro, i was gonna get one for me and one for my lady as well

[@BitesandStrikesFishing]

@@imbrandon16 most saltwater shore and pier anglers go with longer rods

[@ssei2001]

Oh yes, I'm the same I love my Penn reels I have 6 Penn reels; 2-Pursuits 3&4, Fierce 3LL, Battle 3HS. and two Spinfishers 5 & a 6, all in the 4000 sizes, my Spinfishers are 4500. these are great reels!

[@BitesandStrikesFishing]

That’s one heck of a collection! For the price and quality it’s hard to find better reels.

[@kencleg7721]

Just picked up a spinfisher 6 105$ ebay. Used looked new spooled w 15 lb test fresh mono 3500ssvvi

[@kencleg7721]

I have about 10 Penn reels my 140 146 are tuna reels of the 70/80 s still rock. 06/114 h still rock

[@kencleg7721]

Bottom reels also a 714z and 704 Greene z great reel retired for heavy catfish

[@pfpublius]

Yep...buy once, cry once. Unfortunately I'm a gear head tho...so I just keep adding to my arsenal anyway. I've been into anything not made in China lately but I got a spinfisher on the way. I took a chance on a Fin Nor too. Hearing really good things.

[@BitesandStrikesFishing]

Let me know how the Fin Nor works out for you

[@miguelperalez4966]

I have a Fierce III Live Liner and while I have caught some great fish on it, I do have some grievances. - When the spool is at its topmost position, it impedes the ability to release the bail. This top position can also cause the reel to engage the bail mid-cast which more often than not results in popping your line. - The live liner on this reel is still quite strong even at its weakest setting. It really requires a fish to take the bait with confidence. This has caused me to lose many fish. - Imagine these 2 scenarios happen at the same time. A cautious Gar takes your line but it's starting to realize something is fishy since your live liner drag is too strong. Then in a last ditch effort to save your fish, you choose to open your bail and freeline. The only issue is you can't for the life of you get the bail open with the spool in the way. You try to rip it off as hard as you can but the steel body is not giving. You've lost 16 runs now. =========================================== I've been experimenting with the Piscifun Carnivore and all of my grievances are remedied. It's a bit cheaper of a reel, but still saltwater rated. One negative is I don't think they make them in an 8000 series so you won't be able to use as much line.

[@BitesandStrikesFishing]

Sounds like you have a defective reel. I own 3 or 4 fierce live liners and Ive never had any of those issues. If your still under warranty I’d suggest sending it for repair.

[@thevernonposse]

Fierce has plastic rotor and a forge cast main gear have to go up to the battle to get the machine cut gearing found that out the hard way took it out for yellow and big eye tuna and beat it up pretty bad still working but it's a little looser than it started off

[@BitesandStrikesFishing]

Was that the Fierce 2? Because I broke a fierce 3 and opened it up and it was all metal.

[@dartfrogger]

the new battles have aluminum gears, while the fierce has cast zinc.... spend the extra dough and get the battle if you don't need the live liner

[@BitesandStrikesFishing]

Where did you find that info? Id love to add as much detail into my review videos as I can

[@palma1009]

What do you think about the spinfisher6 vs the 7?

[@BitesandStrikesFishing]

I haven’t dug into the details yet but I’ll be doing a review video soon

[@jamestboehm6450]

I've got a 6500 spinfisher, it is a absolute stud. I've not run into anything it won't bring in. 65 lb snapping turtle wasn't happy about being drug to the bank. Worth the money in my book.

[@BitesandStrikesFishing]

I absolutely agree, I’ve pulled in 70+ lbs alligator gar and those fish didn’t stand a chance

[@alfonsoflores7548]

Got to realize something , the high end Penn reels do not have opening in the spools so a ride on a boat on saltwater spray will get in easier, Penn needs change that.

[@BitesandStrikesFishing]

I'm not following when you say openings on the spools. Can you explain?

[@kencleg7721]

Spinfishers are sealed vi is 6 seals

[@juanpedroza1083]

Which one would you recommend as the best

[@BitesandStrikesFishing]

Spinfisher has the upgraded features and saltwater rating Fierce for the budget minded Battle if you don’t care about live liner features and have a little extra $.

[@juanpedroza1083]

@@BitesandStrikesFishing I was actually looking for a live liner reel. But I wasn’t to sure on how which one had the better system.

[@BitesandStrikesFishing]

@@juanpedroza1083 if you plan to do heavy saltwater I’d recommend the Spinfisher. If your staying in freshwater mostly, the Fierce is great and about $130 cheaper

[@juanpedroza1083]

@@BitesandStrikesFishing I do plan to use it more in saltwater. Have you put the fierce in saltwater and can it stand up to the harsh environment. My bad if i ask to many questions.

[@BitesandStrikesFishing]

@@juanpedroza1083 I don’t do much saltwater. The Fierce is rated for salt with shielded bearings, but the spinfisher ball bearings are sealed. If you plan to do more salt, I’d recommend spending the money on the spinfisher. I f you can find the new Fierce 4, it’s supposed to have sealed bearings as well and could be an awesome option for you. I have a video comparing the Fierce 3 vs 4.

[@Jessica37323]

Fierce does not have cnc gears.

[@christopherevans1247]

Save your money don't buy any of these reels they are all junk

[@BitesandStrikesFishing]

Sorry to hear you had a bad experience. I have a playlist, Big Fish Catches, on my channel were I routinely pull in alligator gar with them. 2nd largest freshwater species in America.

[@Seawave669]

Sorry, but these are all Chinese made garbage. I just bought a 1990s Penn 704z on eBay for $175. Unused with the original box. Not only that, the reel was professionally drilled out to make it a true surf reel. Made in USA. I will never have to buy another surf reel again. This reel will last two lifetimes. Leatherman still makes their tools in USA. Maglite still makes their flashlights in USA. Avet makes their reels in USA. There's no reason why penn can't do the same.

[@BitesandStrikesFishing]

Maybe made in China, but here is a playlist of videos where I use these garbage reels to routinely pull in 50lb+ fish year after year.… and none of the reels have failed. I should also mention that I do not wash, clean, service, or maintain them. The occasional garden hose is all they get. kzbin.info/aero/PLMsnn-mzmBDREZ9ZjgGo24S0WXjBKQSxn&si=jcT_lo53k-GPvOKy

[@Seawave669]

@@BitesandStrikesFishing Are they gonna last 65 years like the vintage Penn reels? How about 30 years? Or even 20 years?

[@BitesandStrikesFishing]

Any spinning reel with an extra drag system means extra parts, gears, and wear and tear. These are not like your 704. H Personally I don’t think that any company manufacturing in the US is using better parts. Everything you buy is made at the lowest possible cost to increase profit margins. Business 101. I hope they last me a long time but if I was trying to buy a reel that would last me my lifetime a simple Penn 309 conventional. $80 and very little parts to break