Pentair IntelliFlo 3HP Pump Comparison 011056 vs 011076

[@KeithJohn-qd6pr]

So why didn’t you touch more on the flow rate technology vs strictly rpm

[@ePoolSupply]

The majority of pool owners and pros stick with RPMs for scheduling purposes and such based on the pool size. Flow rate can be hard to understand and or comprehend at times unless you really do your research to dial your pool in. We stuck with what we thought would be the easier concept.

[@PoolProAnswersDIY]

Just saw this at distribution yesterday. It's HOT!!

[@ePoolSupply]

It is indeed!

[@DavidMendoza-py3fg]

How can I address the pump iff you have 2 pumps install?

[@davidserrano9140]

Yes I want to know to

[@TheAaronsway]

You can add the touch screen to them part 356159z set program schedules

[@ePoolSupply]

That is correct!

[@mariachiaztec5557]

Does the new inteliflow come with a safety vacuum release system integrated and keypad to avoid using the phone?

[@ePoolSupply]

It does not but they are still manufacturing the EC-011057 which does offer that feature.

[@SDG-cv4br]

Internet is an excellent feature until you’re not cool enough. Are there manual work arounds?

[@ePoolSupply]

There are versions of the pump that have keypads on them.

[@tedbeckwith2997]

Ready to build using IntelliCenter Kit and IntelliFlow 011056. Are you saying I don't need the IntelliCenter with this? What about light relays and dual pumps as for Spa Booster?

[@ePoolSupply]

As of now you can hook up one low voltage light and one secondary pump. If you have more than that you are trying to automate than you may still require the IntelliCenter. Hope this helps!

[@Damitsall]

I wonder how the new I3s compare to the Intelliflo XFs. I notice the front of the I3 looks like the XF and uses the same lid.

[@ePoolSupply]

You are correct. The I3's use the same exact wet end that the XF's use as well as the lid. Good eye!

[@lowercase01]

Great post. I am looking at one of these to replace a 10 year old 011018. I am not sure which to get. Any recommendation? Is the 011075 pretty much the same pump with the newer wifi and 2" connects?

[@ePoolSupply]

Yes, in fact, they will be the only models available for purchase here in the near future. Give us a call for the best available price!

[@KeithJohn-qd6pr]

You are correct , but for cheap money the 011076 has the relay to connect other components.

[@ernesttorres4059]

I'm a pool guy. How do I check the program and schedules on the Intelliflo3 VSF? Can I do that or only the owner?

[@ePoolSupply]

Should be using the Pentair pro app to sync up to the pump.

[@jacktracks707]

Is the only pump that pentair makes that connects directly to the Pentair Home app without requiring any secondary equipment or intellicenter? My system is just a pool pump only. No lights, heater, or secondary pump. I live in a very high cost Time of Use area and want to be able to control when the pump is on myself. Should I consider anything else?

[@jacktracks707]

Do any of the whisperflo pumps connect directly to the pentair home app without intelliconnect or any other secondary equipment?

[@ePoolSupply]

No they do not.

[@ePoolSupply]

Hello, for that type of setup you would probably want to go with the 011075 model. It is just the pump without the IO board included. Would be perfect for what you need on that type of system. Below i will attach a link to our website so you can check it our for yourself. Hope this helps! www.epoolsupply.com/products/intelliflo3-vsf-3-0hp?variant=40135515537493

[@jacktracks707]

@@ePoolSupply Really appreciate your reply. Thank you very much. I am on a time of use plan that changes throughout the seasons and jumps around even during the day. This will be perfect! One other quick question I’m sure my pool pro can also answer but I am curious. Can I reduce from 2.5” ports down to whatever my pipe size is? I believe they are existing 2”.

[@ePoolSupply]

@@jacktracks707 Yes you can.

[@jeremyhancock321]

Sounds like a nightmare for the pool tech. Hope the app handles multiple locations quickly and easily. What happens if the internet is having issues. "Sorry sir I could not connect to your pump so your pool is still dirty". I suppose a display and wifi is too much cost. Would have been nice to have one or two buttons you could configure with the app to handle these situations.

[@ePoolSupply]

Hello, It has a connect button for the Wi-Fi and Bluetooth. also has a quick clean button as well as an on/stop button. Hope this helps!

[@Seas_Of_Neptune]

It does look like Pentair was smarter than some other manufacturers--there's an on-off and a quick clean button. Still not thrilled about it, as I think the old Intelliflo was near perfect and close to bulletproof, and didn't need a phone and app with all the potential connection problems that come with to program, change, or diagnose. Nothing's worse than having to be on-site with a phone-only system that is acting up, or have to wait or make a return trip to get the wifi password to connect to the system.

[@buckdude181]

@@Seas_Of_Neptune yup. Currently have 2 pools I service with this new VSF. Not a fan of them at all.

[@jttimmons4322]

i have a pentair 520554 intellichlor ic20 and 520556 intellichlor power center, can they mate to the 011075 intelliflo3 that does not have the io board?

[@ePoolSupply]

Hello, unfortunately, no, that's the whole purpose of the io board. Without it, all you can control is the pump. Pentair will be offering it as an add-on in the near future so stay tuned.

[@ozzyg92]

What if you have automation already ? Can you hook it up to an easytouch?

[@ePoolSupply]

You can still hook it up to automation, with a cable under that back cover there's a RS 485 connector so just the IntelliFlo cable, or if you are able to make one yourself. Hope this helps!

[@alextiburcioescobedo7617]

@@ePoolSupply do I just need the green and yellow cable, so red and black cable aren't necessary?

[@ePoolSupply]

@@alextiburcioescobedo7617 Exactly, Red and Black are not needed.

[@HectorGilHOF]

Hello. I am looking to replace my Pentair Superflo model 340043. From what I understand from the video, I will not be able to use the existing 2inch female unions that are currently connecting to my current pump. Is there a fitting I can use to reduce the 3inch outlets to 2inch unions I currently have? Also I have the Intermatic digital timer which controls my high/low. If I go down this route with this pump, I wouldn't need this anymore? I can control everything from the pump itself? Also would I be able to wire my pool lights into pump control board to also control centrally? Thanks for the info.

[@ePoolSupply]

Hello, no there isn't any fitting that will reduce the size so you can use the old unions for this pump. You can only add one light to the rear end of this pump to control it through the pump. you can also add a secondary pump for a water feature or booster pump. Hope this helps!

[@HectorGilHOF]

@@ePoolSupply so in my case I would have to use a reducer coupler from 3 to 2? Is that correct?

[@andyh8239]

In in the process of building a shallow pool / pond. There will be an upper pool that overflows into the lower one (6 foot wide waterfall) I was planning to plumb it with 2" pipe. (4 main drains + 2 skimmers and diverter valves to balance out) Would you recommend this pump for this application? (I will also need a sand filter.) I'd estimate we are talking 30k gallons. Also; if drained, is this OK to leave outside in a winter that sees -30f

[@ePoolSupply]

Should be more than enough to operate a pool like that. And yes they can be left outside as long as the pump is drained. Hope this helps!

[@andyh8239]

@@ePoolSupply I will have to order online as there are no pool stores here. Suggestions?

[@andyh8239]

@@ePoolSupply Do sand fiters have a big impact on power efficiency of your pump? (do most filters bypass the 'over pressure' to eliminate problems?)

[@ePoolSupply]

@@andyh8239 Give us a call. [phone].