Perfect Ombre on Starbucks cup | Glitter Tumbler | Epoxy on a Starbucks cup

[@crafts_dme]

Great video thank you for sharing. I’d like to share a tip with you, what I put on my box to spray paint my tumblers is a lazy Susan and this way I just spin it and not touch the cup. 😊

[@Julzyboo]

😮👍🏻great tip!

[@leaalvarez9804]

I've been using brite tone for my cups. It works well and the end results are great BUT it is so time consuming. I chose brite tone because I do not have a spot where I can have epoxy in my apartment. Like a very ventilated area like a garage. Brite tone is safer at home with no PPE required, but if I had the space I'd be using epoxy.

[@lafajard2]

I have read that epoxy eats through the plastic cup. Most recommend to use CrystalLac on this type of plastic.

[@LilyRoseCraftroom]

No, the Epoxy does not eat or go the plastic.

[@jessicarivera8714]

I appreciate all the knowledge you bring to the crafting community. I am so obsessed with your ombré! Once again thank you so much for always sharing!

[@fmagoo13]

Omg loved ur video. Ur giving me the courage to try it myself. U broke down each step perfectly unlike other videos

[@conniesubia9288]

I accidentally came across this video 😳 I am so glad I did!!!! You are amazing and so detailed in your demonstration 💖

[@nadiama16]

I’m not a fan of glitter but I love, love, love how yours turned out! The whole project was beautifully made. Thank you for sharing your knowledge and skill.

[@bdaypartyspanish]

Such a thorough tutorial. Just what I was looking for to answer ?s I had or techniques from others. Do u have a chart of how much epoxy you typically do for different size cups and thicknesses?

[@valeriefimbres8569]

I just some how stumbled onto this video. You make this look sooo flawless. Also, your patience 🥰 beautifully made. Wish you nothing but success

[@michellecamacho5017]

Very detailed. Very organized. No pausing. Watching this made me feel confident that I can try my own cup. You have a new subscriber/follower. God bless.

[@EmpressNatiLocs]

Beautiful work! I always wondered how these cups were made by you made it look effortless! Thanks for sharing your talent with us. ☺️

[@SophiaaRobin]

Omg i needed this video i kept trying to figure out if I could use clear resin on a reusable Starbucks cup and I could not find an answer till this video ❤️

[@Julzyboo]

Omg this is probably one of THE best tutorials I have seen yet. I'm just beginning to order products and begin this hobby so I'm thrilled to see information like this. Thank you! Subscribing!!!

[@yolandalezama5179]

Thank you so much for this tutorial, it looks so easy to follow. I am thinking of starting my own business. Your work is just amazing.

[@reaganroush9949]

Hi I would love it if you made a tutorial on the color changing cups! They look amazing and I would love to see how they are made. 😊

[@reaganroush9949]

Also I just made a cup using this tutorial and I absolutely love how it turned out! 💕 Your tutorials are so easy to follow! Now I just need to hunt for more Starbucks cups.

[@themisstra7708]

This turned out to be a very shimmery cup I’ve seen some that are not as sparkled. Very good.

[@Julissa1130]

Omg I loved it I’m just starting can’t wait till I do this and thanks for letting us know what products to use

[@lorenarubio5791]

I love how you explain everything! Thank you so much for this video ✨

[@robinbarnes5104]

Do you prep the Starbucks cup at all? I did one once and the epoxy seemed to lift but I didn’t prep.

[@ilianaramirez8507]

Listen friend! I have been obsessing with your tumblers! I recently started making tumblers and it’s so much fun the possibilities are endless and i want to perfect my ombré technique this was super helpful! Thank you!

[@LilyRoseCraftroom]

Thank you!🙏🏼

[@victoriatrujillo221]

Where do you buy them? I want to try to do this too (:

[@stepscoun48]

I was watching some Epoxy channels and your channel was recommended. Awesome, videos. Thanks, for sharing, LilyRoseCraftroom.

[@emiliaaguilar6501]

Thank you so much , you really shared everything,just ordered my spun it, never made one but you explained and showed us perfectly

[@silveravnt]

I came for the sparkles, I stayed for the hair, I hit like for the expert craftsmanship.

[@LilyRoseCraftroom]

🤣🤣 Thanks !💕

[@alexdamigella8095]

Could you use modge poge for the units “Glue” ?

[@mariadelafuente4096]

Thank you so much. Very well explained. I’m new at this and definitely makes it easier to do watching your videos.

[@nallelymayoral6651]

I love this video it was really helpful and you made it look easy plus you actually show us how and what to do. Thank you

[@moniquegarcia7605]

I'm a new bee an have watched this video step by steps! Thanks you so much! I do have a question though How long did you let it cure for before sanding?

[@maleenfraticelli8092]

Because of this video I made a beautiful ombré cup thank you so much

[@amairanimartinez3898]

Amazing video. Thank you for taking the time to share!! 🤍🤍

[@KathleensBasicsVideos]

I've heard horrible things about the spin it but it really seems like it's a good machine for starbucks cups because they are much lighter...

[@themostcraftynurse3914]

Kathleen's Basics it works fine for light cups also wine glasses but regular tumbler not so good. Ruined several trying to use it.

[@Sprinkle_sprinkle88]

I am so glad I found your KZbin channel 😫 you have helped me so much!!! ❤️😭

[@TheMsCraftycrafts]

So much detail !! Thanks for sharing !! Beautiful !!😊

[@LilyRoseCraftroom]

Thank you💖

[@yvel91]

Hello, wanted to ask if you make ombré tumblers the same way as a Starbucks cup..??.. beautifully made also💖💖💖

[@noragalvan8609]

Hi love it! After how much time did you remove the decal that was covering the logo ? Thanks 😇

[@lisahoffman3084]

Very interesting .bg

[@keliannapanos1248]

I believe you do it while the adhesive/expoxy/whatever you're using is still wet, otherwise it can take the edges of the glitter off with the decal you used to cover the logo and get wonky looking! Similar techniques are used with nail vinyls :)

[@carriehardrick3346]

Love your cup! Did you do anything to prep your cup before epoxy?

[@pure_bliss248]

This is the best video ever!... I love the details they are so helpful

[@lisac7191]

Stunning & my favourite colours. Xx

[@crystalramirez7417]

what size did you make the mommy fuel decal? 😬

[@giftofgivingdesigns]

I am so inspired to start using epoxy now!!! Thank you for the video, I love how much work goes into this project.

[@lsmith9901]

Love this video! Trying my cup right now. How many hours did yours dry for before you sanded it?

[@yazalaz]

4-6 hours

[@agraves2027]

Just starting and this video was so helpful!! Just subscribed, I can’t wait for you to teach me more!

[@arabellaweinman2873]

Can you use matte instead of semi gloss I just realized I bought matte

[@monii_1]

Sooooo beautiful! 😍😍😍

[@veronicaybarra9342]

love it great job im going to try to do the same cup diffrent colors

[@MommaLife-dd6yr]

What epoxy are you using? I was told you can't use epoxy on plastic because it melts it.

[@pauletterocha1056]

Hi, question Isn’t the epoxy harmful because it seeps through the plastic.....???? And how do you avoid the spray paint on the rim of the cup?? Wouldn’t that also harm a person if they drink directly from the cup???

[@LilyRoseCraftroom]

It is safe. I use alumilite epoxy, it's non toxic, No VOCs, FDA compliant. And food safe when cured. It does not "seep" through plastic. I clean the rim of the cups. Spray paint is non toxic when dry. Not harmful. I've done PLENTY of research.

[@jacquelinejaquez2388]

LilyRoseCraftroom thank you soo much! There’s soo much information and claims out there I begin to doubt and get paranoid myself! I’ll be making my first with the help of your tutorial tonight! 💓

[@Idamomdatsy71]

@@LilyRoseCraftroom I also did a plastic Starbucks cup with epoxy and got a lot of criticism for it from other cup makers because “it is toxic on plastic and you are going to poison people “ and after doing my own research I found that you are correct about it being safe after it is cured. Your cup is beautiful!

[@karenhadden4980]

How did you prep your cup? I’m new to tumblers and I’m thinking these would be great practice cups! 🤪

[@sharmita220]

Can you use a hair dryer instead of heat gun?

[@romansmoments3343]

Your video is amazing! Thank you for the step by step instructions. I’m new to the tumbler making and I am having an issue with getting the epoxy to stick to the bottom of the cup. Any suggestions how to get it to not separate? Thank you 🙏🏼

[@karenolmedo80]

Thank you 🙏🏼 so much for this video so helpful I been wanting to start doing resin cups.....how many hours after you can sand the cup? Thank you in advance 😊

[@justinaTapia93]

Quick question. Why do you put the vinyl after epoxy?

[@nadiaquevedo4386]

Did you add anything to the cup before the epoxy at the beginning

[@ERROR-404-h4u]

Question, why do you want to glitter the Starbucks cup. Can it be any cup. Are these cups stronger. I like the look.

[@rebeccaguerra3373]

The best video I’ve seen .. the first coat was spun for about 6 hrs but how long do you spin the cup after each coat of epoxy after that ?

[@eliseandree]

Im wondering the same thing

[@carmenloyd4384]

Each coat should turn same amount of time. Usually 6-8 hours so it’s common for everyone do craft at night so they will be finished when we wake up in the am

[@AzGemsCheeranddance]

Don’t use epoxy on one walled cups. Especially Starbucks cups

[@carmenloyd4384]

Alexa Samilton oh yeah, good point to bring up. I don’t epoxy these. I do stainless steel cups

[@AzGemsCheeranddance]

Carmen Flores yes stainless steel is okay but epoxy over time eats this plastic and it will last off fumes

[@gabbylawless866]

Have you ever used mod podge adhesive clear spray to seal the glitter before doing the next layer of epoxy? Having trouble finding the one you used

[@yadiragarcia9351]

This is so pretty, but I have read and heard that epoxy is toxic I'd applied on plastic, or does it depend on the epoxy?

[@xxshezdopexx]

It depends on the epoxy. Alumilite states that theirs is FDA compliant; therefore safe to use.

[@Jelly_andJam]

I thought it had to be double walled tumblers to be safe from epoxy

[@TekREvU]

Hello! loved this tutorial, I was wondering, do you leave it spinning during the 4-6 hours of drying time?

[@LilyRoseCraftroom]

Hello. Yes. I leave it spinning for that amount of time.

[@sashabird6798]

@@LilyRoseCraftroom Thank you for the quick reply! I was also wondering, so after I did the spray paint sealant step it was time for the second layer of epoxy, how do you keep the Starbucks logo clean during this step, even after the sealant when I was spreading the epoxy I got glitter all over the Starbucks logo.

[@kaitygomez2533]

Hey what are the ingredients and were do your find them? And were did you get the Starbucks cups? /how much does it cost?

[@emmapedroza80]

Thank you so much for going so slow and being so detailed!! Awesome work and awesome video! Thank you!!!

[@MiaAgnewRealtor]

Hello love these. I would like to make my own for family members. Can u PLEASE tell me Where is the least expensive place to get the cups and glitter and glue and vinyl wholesale? THANK U IN ADVANCE FOR YOUR HELP!!!❤️🦋

[@illianazaragoza76]

What did you use to put on the Starbucks logo when you were putting the glitter on the cup?🥰

[@KaitlynnWilson92]

Where would you recommend getting bulk Starbucks cups?

[@mcserratoayala]

I heard that epoxy goes through those cups and it not being safe. it looks nice though!

[@RamoArt]

If you use food safe epoxy, which you should do anyway, it should be alright though?

[@brianab2005]

@@RamoArt most epoxy is for occasional food contact not for food consistently sitting on it.

[@RamoArt]

@@brianab2005 Even if it says it's safe to use with food?

[@brib2831]

It does look nice but what I'm wondering about it when the cup sweats since its not a double walled cup...its going to ruin the cup right?

[@marciaelizondo4402]

You shouldn't apply epoxy on a plastic cup.

[@lopme2]

Hello.. can I apply epoxy to a cup if vinyl was applied to the cup first ?

[@normadiaz6220]

Thank you soooo much for sharing your knowledge and what you do for your cups. I appreciate all of this info and can’t wait to see more videos! You are amazing!!

[@tiaalynn222]

Would recommend 150 or 220 sandpaper?

[@denisflores4620]

How long does the epoxy last? Since the cup is single walled the cold seeps through. Was wondering what happens

[@paperbagpanda7277]

I always wondered the same. I also wonder if they're prone to cracking because these are flexible cups. I can't find an answer tho. It's like no one really tells all the secrets.

[@PamelaBueno-de3sg]

Paperbag Panda it’s because you’re not supposed to epoxy plastic like this. Ask any epoxy company and they will advise against it. Just do some research before you try it.

[@paperbagpanda7277]

@@PamelaBueno-de3sg I figured as much. I need to research outside of KZbin as well. All the videos I see don't mention this cracking but it makes sense that it would. I even wonder if there is such a thing as flexible epoxy.... hmmm

[@meganmedrano9913]

I personally reached out to the amazing company which is the epoxy she is using and they said that this is an FDA approved food safe product and is safe for use on plastic and single and doubles walled cups. This was their exact words

[@SB-uw9eh]

@@meganmedrano9913 is or isn't?

[@DSJV2229]

What is the size of the Starbucks logo?

[@camillejohnson1279]

Will this work on a insulated tumbler?

[@ShoshoneLady]

So Pretty 😍 💗 💓 Love it very professional looking 👌 👏

[@mtina3440]

I love your channel. You have definitely helped me try this. One question for you is when you apply your last set of epoxy how long do you leave it on the cup turner?

[@janievaldez6530]

Can brite be used on glass to add glitter

[@lleland5419]

Where do you buy your tumblers from? This was such a helpful video. Thank you

[@alexshaw4519]

How long does it take you to put a coat of epoxy on the cup??

[@miriamarzate5283]

is this tumbler for hot and cold drinks¿

[@galileaavila8869]

Can you do more Ombre Glitter videos in different colors ? Love your Technic !!!!!

[@nancygarcia9781]

Wow! So beautiful! Thank you for sharing!

[@stepfg2616]

Can you use UV resin?

[@valeriabalkey7089]

Can you use any type of epoxy ?

[@rashacaliman1298]

Thank you thank you, thank you!!! I've been looking for awhile now on how to ombrè. Your video made this so doable.

[@elenasanchez9080]

did you sand your tumbler

[@claudiazertuche1000]

Do i have to sand the cup down before applying the epoxy?

[@jax2751]

Amazing video! Thank you for sharing your technique!

[@flowerlove4485]

Can you do this with Brite Tone?

[@rochim.1192]

Gorgeous cup!

[@alejandraheredia9843]

omg thank you so much i was having a lot problems with the ombre 😢🥰❤️thank you for your videos

[@ednab.9001]

Did you sand tumbler prior to adding the resin?

[@69sexyroxy]

where do you get the starbuck cups thank you

[@ljlcats]

Love your video! Thank you!

[@vanessajessie3791]

Looooove your work. Thanks for sharing your knowledge 😊

[@araceli.c.r.6833]

Ola me encanta sus videos por su trabajo me encantaría aser algo así me gustaría preguntar Dond cómo consigo esos brillos pliz quiero empezar poco a poco pero no se mucho🙈

[@marciebridges1160]

How long does you cure after the second round of epoxy?

[@lindsaydeclute714]

Your amazing and so is that fricken awesome ass cup! God I wish I could make one or have someone make one for me! Way cool!

[@ajdereksworld6085]

Hi after the glitter it is 4-6 hours dry time what about after each layer of epoxy is it the same?

[@elenafranco2083]

Hi, is it safe? use epoxy in a plastic glass? I´ve heard about the temperatur makes the glass sweet and its reaction with resine is bad for health? the same thing with ceramic mugs. Have you heard any of this? thank you!!

[@kimberlyvillavicencio937]

what do you use to cover the Starbucks logo

[@sandravarela7625]

I'm new to cricut world and all of this tumblers I wanted to know is there anything else that can be used instead of epoxy since I heard that it's not safe to use?

[@annewade3493]

This is so pretty ..omg

[@cimonemoore3529]

can I do this on a glass starbucks cup??

[@jessicagarcia1222]

Do we mix part a and b to add the glitter ???