Perun moto KTM 690 2019+ Luggage rack, Extension plate and Heel guards with Mosko moto Reckless 80

Overview of Mosko moto Reckless 80 (V4.0) installed on a KTM 690 Enduro equipped with Perun moto Luggage rack, Extension plate and Heel guards.
Detailed write-up about fitment of Reckless 80, with plenty of photos, can be found in our blog post:
www.perunmoto.com/blogs/blog/...
For international orders, Perun moto products are available for purchase at:
www.perunmoto.com/collections...
www.perunmoto.com/collections...
www.perunmoto.com/collections...
For EU customers, please visit:
www.perunmoto.eu/collections/...
www.perunmoto.eu/collections/...
www.perunmoto.eu/collections/...
Mosko moto Reckless 80 (V4.0):
moskomoto.eu/collections/rack...
Music copyright info:
"Life of Riley" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/b...

[@tshansen]

There is a good reason so many choose both mosko and Perun! Great to see your ongoing work for us 👏🏻

[@Perunmoto]

Thanks! Appreciate the comment! 🙂

[@oli-no-way]

Great product 👍👍👍 thanks perun moto

[@nikolamaletic]

Thanks, Oli! 💪👍

[@Mototouring777]

Кайф! Отлично выглядит! Когда у меня будет 690-й, тоже поставлю себе такую систему.

[@Perunmoto]

You will love the 690! And this setup too.

[@stevia13]

This is exactly the set up Id like for my 2023 701 - but cant you make some side luggage racks to protect the rear plastics and also the bags from falling in to the rear wheel - this is what Mosko Moto recommend themselves. PLEASE!!! 😉

[@Perunmoto]

Thanks for the comment! I ride 2023 701. Reckless 80 fits perfectly! If the bags are set properly (so the cutout on the base is above the fuel cap), bags rests completely on the rear side plastics and they don't need more lateral support. Tried and tested many, many times. No way bags can get in contact with the rear wheel or swing arm (unless bags are mounted too much towards the rear). Yes, side plastic will get scuffed but that is inevitable. If this really bothers you, you can apply some clear self adhesive film to protect them. By the way, check prices of the new OEM plastics, they are very reasonable.

[@stevia13]

@@Perunmoto Thanks for getting back so quickly 👍🏼 Id heard the rear sub frame on the 701 was potentially a weak point - or is it the front subframe??? I know you guys sell the (tank) reinforcement kit. Is the rear subframe ok with the weight of the bags etc when they are loaded :-))))

[@Perunmoto]

@@stevia13 You are welcome! You can find a lot of info about this 'issue' here - www.perunmoto.com/blogs/blog/ktm-690-enduro-and-husqvarna-701-tank-bolts-issue-explained. Everything written there applies to the 2023 and 2024 bikes too. In short, rear subframe (tank on this bike) is almost indestructible, but you may consider upgrading tank bolt assembly.

[@emanueleguarnuto4056]

Will you make a similar kit for the ducati 698?

[@nikolamaletic]

Not in the plans, at the moment.

[@regarolt1691]

Very good system, I Also need it for my 690 Enduro R, is shipping to Germany very expensive?

[@Perunmoto]

Thanks! We have EU web site and the stock is in Germany. So shipping is very reasonable - www.perunmoto.eu/collections/ktm-690-enduro-enduro-r

[@regarolt1691]

@@Perunmoto Ok

[@TRIUMPHUS1]

My strap, which is mounted on the Perun heelguard, snaped on the edge of the healguard. Is there any way, how I can protect the straps better, because on the other side also the strap starts wearing out. My Mosko Moto 80 was brand new before my last 10 day trip through south Blakans. Maybe my heels rubbing around the straps while riding. I guess, that the Healguards stick a bit out on the end of the edges. I think about to bend it a bit to the swing arm side, to less rubbing around.

[@Perunmoto]

Thanks for reaching out and sharing this. Luckily, straps on R80 are replaceable. We noticed that there may be some premature wear on the straps on R80. I don't think the blame is on the straps. I think the thing is that A) R80 bags are usually loaded heavier than any other rack-less bags and B) straps are not secure enough so they move - when the bags are installed, straps are tightened, but due to weight, when bags 'settle' during the ride, one side is looser then the other. It may be a good idea to retighten the straps after hour or so of riding. We are working on new generation of the Heel guards and we will make even smoother edges.

[@TRIUMPHUS1]

Thank for your quick response. I have already ordered new straps from Mosko Moto. The Perun products are great and very well engineered and I always recommended your products in my group. 👍 One of my good friends which introduced Perun products to me is Jakob Weinknecht.

[@Perunmoto]

@@TRIUMPHUS1 Thank you for the kind words! Greetings to you and Jakob!

[@carls.2071]

More like a Mosko Moto commercial.

[@Perunmoto]

Hi Carl! This is not a review and it is not titled like one. Sorry it that was not clear enough. It is an overview of these bags on the motorcycle equipped with the parts we at Perun moto make. We also do the same videos with Enduristan, Giant Loop, Kriega etc. By the way, Reckless 80 is great. I love it.

[@regarolt1691]

Where did you get the motorcycle maneuvering rail with rocker?

[@Perunmoto]

Hi, the dolly is made by these guys www.blacksmith011.com/ Super sturdy, easy to move the bike around the shop.

[@regarolt1691]

@@Perunmoto Thanks👍 Is there only an option to order there via email address? I just see that it comes from Serbia Best regards

[@Perunmoto]

@@regarolt1691 Not sure, sorry. There is an email in the Contact section of the web site, send them a message.

[@regarolt1691]

@@Perunmoto You ordered them too?

[@Perunmoto]

@@regarolt1691 Yes,. But we are in Serbia, I just went there and picked them up. :)

[@plattenschielerlp7796]

Exhaust?

[@nikolamaletic]

It is Wings silencer, if that is the question. Due to the new material for the bags base and support provided by Extension plate, bags are safe from the silencer, there is plenty of clearance. Heat shield is still advised.