Peterbilt 352 Wrecker! We are gaining ground here. Won’t Be Long!

[@quackquack6116]

That Pete is fighting you it needs to be reminded look I’m not here to scrap you I’m here to save you

[@JamesPretty]

Thants right!!!

[@billymccomas8694]

Good morning James man I hate seeing you have so much trouble I just want to throw a few ideas at you check the regularter on the compressor and if it has a air dryer check it when I pulled mine from the woods the air dryer was doing something like this hope this helps

[@JamesPretty]

appreciate ya brother.

[@kevinhornbuckle]

Air dryer was the first thing I thought of. Just by pass it for now.

[@TimIvins]

Good Morning James & Jessica, I know the wrecker is going to look so awesome when its done

[@JamesPretty]

I agree brother

[@danielgeng2306]

Great job Jessica !

[@johnhanson4795]

i barely even in late 70s and early 80s running into marmon trucks at least i never saw them.pretty rare truck i imagine nowadays

[@JamesPretty]

Ya I’ve only seen a hand full of them

[@Scaniar620]

Hi James, mix washing up liquid with water in a spray bottle, then spray all air fittings……the air leaks will blow bubbles so rather than trying to hear leaks, you’ll see them 👍👍

[@JamesPretty]

We use Windex. My bottle pump quit. Were bringing a back up

[@billywhite3020]

James you work hard on all your trucks keep up the great job

[@JamesPretty]

Thanks so much for being here.

[@billywhite3020]

@JamesPretty big fan of your and Chad iam 53 years old now I remember the cab over come thru our town from Tennessee James and I drive big trucks to love the old trucks

[@youtubemonitors1202]

Just love your channel James keep up your good work in saving these classic trucks .

[@JamesPretty]

appreciate ya bro

[@allenmitchum9356]

For being a one man crew ,you get it done . Great informative channel!

[@mickbaker2483]

Hi James I'm not up on American truck breaking systems but a lot of older British truck's we had a in-line check valve about half way between the compressor and if that would leck off then we would get the same thing because that valve would let the air tanks leck back and cause your problem with not going over 55psi, apart from that your lady Jessica is absolutely fantastic the way she knows her way around your spanners and not frightened to get in there and get dirty I think that is great my ex wife would try and help me out but momma is great at what she doing I also like the fact the two of you just get on with thing's (no shouting on camera) like some channels do, I'm sorry for you losing all your filming it's a sham but thank you for producing a good video from a bad situation I can't wait to see the peterbuilt hit the road home thank's again.

[@JamesPretty]

thanks for being here, I love how jess isn't scared to get into it with me and these old trucks shes great

[@WilliamHencey]

Loving this series of videos, Failing time and time again with the big picture, but getting to experience the tiny battle wins is a good way to produce these. ❤🎉 It will be so amazing when we get air pressure❤

[@JamesPretty]

thanks for watching. we are getting closer to that moment

[@R.Hunter-q9t]

I am glad you bring us along. Always enjoy all your videos. Your Wife is quite the helper!! When James was changing the old fittings to the new one, I swore he was going to rip the Vise right off the bench. Some of those old fittings were on tight. James has forearms like DWAYNE Johnson!!, I swore he was going to rip the Vise right off the bench. Some of those old fittings were on tight. James has forearms like DWAYNE Johnson!! I'm glad you and your wife got a got a chance to work on the 1972 Freightliner. To me it seems like you're getting much closer to the point of taking the truck home. It's not easy being pretty and having lots of patience. Wish I lived closer I would like to see if I could help find the problem for Mr. Pretty. I am good with air leaks, and I am an expert in Wiring. But James will find it, he is a very smart person. I have learned a lot on this Channel, and I continue. Getting ready to order my son a Black Betty T-Shirt color ASPHALT! Its's TO BAD that at the bottom of the truck there isn't a signature of James Pretty on it. He too watches all your videos on you Tube. Just found out the other day he was helping in the garage, and he tells me Well James would do it this way, and that way. So, I ask who this guy James? He tells me James Pretty on You Tube is Awesome. Hope he talks about me when he gets older than 12. So, on his Birthday I will get him a Black Betty T-Shirt. Love your video's.

[@JamesPretty]

That’s awesome. I appreciate ya tell him I said hello

[@TimothyPeterson-mc4gf]

Good luck James and Jessica getting the Peterbuilt back in working order it's a jem of an old school truck 😊

[@JamesPretty]

thanks brother, I can't wait to drive it.

[@NileKelly]

That is one beautiful rig! I've been following the series of videos all this time.

[@JamesPretty]

we appreciate ya being here

[@kentmahan1796]

James always make sure u got all ur tools that u can think of Before u go to the truck. Ur welcome buddy

[@JamesPretty]

Hahaha ya I try to make sure I got them all.

[@johnbird2703]

Good teamwork, you guys will get it done and we will see you rolling down the road soon 👍🏻💪🏻

[@JamesPretty]

Thx for being here

[@glennhunter7018]

Good video working on the Peterbilt wrecker truck again don’t give up brother you will get all of the air leaks fixed and drive it home. I guarantee that you won’t give up. Brother safe travels on the airplane, captain.

[@JamesPretty]

you know me bro, we never give up

[@glennhunter7018]

@ I heard that I heard that bro get it man

[@pawepech9134]

Szczęśliwego nowego roku 2025 James. Piękna ciężarówka i bardzo ciekawa. Powodzenia w dalszych pracach przy uruchomieniu. Pozdrawiam z Polski 🇵🇱🇵🇱🇵🇱

[@JamesPretty]

Thx so much for being here

[@richardhoneywell7411]

Great video James and Jessica glad to see and hear that you're getting closer with the Wrecker. Looking forward to your next video stay safe James and Jessica.

[@JamesPretty]

Thx Richard

[@youtubeisawesome2487]

use a screwdriver and poke the r12 thru the exhaust port, that foot valve being stuck may have pushed it down and all the air is going to a rotted out brake chamber. those old trucks didnt have the 90 psi regulators, most of them gave all the air to all tanks at once, not one then another and so on like they do today. three things we know. the d2 isnt stuck in the off postion, the unloaders are down so it builds air. the compressor is working. the air leak is massive, leads me back to brakes, all of those stratoflex hoses are most likely porus, but you already know that i am sure,

[@JamesPretty]

There are a bunch of leaks but I think you’re right there’s a big one someplace

[@johnhanson4795]

love the wrecker its iconic.i got new job at a bodyshop my new boss has a old farm and he listed a old bar mirror from early 1900s 6 feet long on ebay so i got off work early today.he listed it for one grand.buyer whent aways to get uhaul

[@JamesPretty]

Nice

[@roman-kk4ug]

Thanks for sharing.

[@JamesPretty]

Thx for watching

[@keepontruckinoutlawlife1248]

Man I wish you still lived in Michigan I would be over everyday cleaning that rig for you!!! I'm dying to hear them horns maybe on next video? Great job guys..

[@JamesPretty]

thanks brother, wish you were closer

[@rickmunson8317]

You'll get it, I'll be watching you! Appreciate ya

[@JamesPretty]

Thx brother

[@richardwendell9378]

Check the signal line that goes from the governor to the air drier. It sounds like the line is leaking or cracked. As soon as the governor kicks in the psi is leaking

[@JamesPretty]

No dryer on this unit but I did check the governor line for leaks no joy

[@Jack-d9o7u]

Hi James and Jessica. Great videos. I'm not sure about old Peterbilts of that vintage but new trucks have what's called a "pressure protection valve" between the primary and secondary air tanks that does what you described about opening at a set pressure (usually ~100 psi in my experience) to let the air into the secondary tanks and the rest of the system. Maybe there is one of those in your air system that is opening to a big leak and/or maybe it's just not working properly.

[@JamesPretty]

ya I was thinking maybe it was something like that, but turns out this old gal doesn't have one. we're just replacing things that need replacing anyway until we come up with it.

[@billysmith2494]

Your getting closer brother keep up the good work and keep on trucking can't wait to see it at home with you guys you keep making videos and I'll keep watching my friend

[@JamesPretty]

thanks brother I appreciate ya

[@jackpinesavagerepair1918]

Its the check valve between your 2 tanks n second tank is leaking. You cannot hear leak cause no air in second tank. Follow line off compressor to condensate tank (if it has) then to main tank. Then there be a main line to second tank. Try plugging that line.

[@JamesPretty]

You’re not wrong. I spent a lot of time taking lines off and plugging them. We’re getting closer. Next video is quite revealing

[@jackpinesavagerepair1918]

@JamesPretty do you have the condensate tank for removing moisture after compressor

[@davidsimons6881]

Good morning, James and Jessica, another awesome video. Appreciate everything you do. That’s gonna be a sweet old wreck once you get her going.

[@JamesPretty]

Thanks David, I want to drive it home so bad.

[@Demonpk-lb4gh]

I got faith in your brother you'll find it. Love your videos.

[@JamesPretty]

Thx brother

[@johannboldt4196]

Привет из Германии. Удачи в делах и благополучия в семье!

[@JamesPretty]

Thx for being here

[@timatwell3728]

James it kinda sounds like a pop off valve popping out and releasing the air pressure on one of the tanks or right b4 the tank and closing shut when pressure drops to 30 it shouldn't do that but setting so long hard to tell but you definitely need a lot of air to be able to find all the leaks but you will find it just take some time

[@JamesPretty]

thx bro... very frustrating but I feel like were almost there.

[@nelsonmattoon150]

Always one step forward and two steps back. But you always get through it.

[@JamesPretty]

believe it or not, this is the stuff I enjoy even tho it makes me so mad lol

[@sammystephens7823]

Great video - I’d call that wrecker Frankenstein 👍

[@JamesPretty]

Chad already using that name

[@northstar2007]

there's a lot more to that pedal than I ever thought there would be, cool to see,

[@JamesPretty]

ya they are a real pain in the butt

[@lawrencethurber1679]

As your air pressure rises the Tractor Protection Valve allows air to go to nonessential air accessories like air seat or suspension, so you might have a air leak beyond what you have been concentrating on.

[@JamesPretty]

you're not wrong, I spend another day disconnecting and plugging every line on the truck looking for the one that stops the hemorrhage starting with the furthest thing from the main tank...

[@lawrencethurber1679]

Usually it opens and closes about 60 PSI to insure you have air for the brakes if you have a blown out air bag

[@Huskylover572]

Hey bro I just want to say I feel so bad for you man You're like that kid that gets knocked down and keeps getting back up It seems like shit just keeps getting thrown at you And you just turned the fan on and keep pushing it all Away great job Not giving up bro you'll get it just take your time man Keep up the good work buddy god bless you😅😅😅❤

[@davidkirby8440]

James you could take some soap and some water to spray on lines to find the leak dont know if this would heip

[@JamesPretty]

I brought my Windex bottle but the pumper quit. We appreciate ya being here

[@darrencatenacci2737]

Hi James and Jessica getting closer! Was thinking the foot was probably a lot of the reason she wasn’t building air seems to have helped a lot tho. Builds more now than before. I think you are correct though gonna need something to really put a bunch of air into the system then you’ll be running like crazy to find all of the leaks. You can only do so much finding of leaks with only 30-50 psi in the system. That little valve you had in your hand maybe a big part tho. That looks like a quick release valve for the brakes. I’ve had them fail and really made a huge problem for building air. I’m sure you’ll get it fixed up soon. Stay safe I’ll be watching for you to go live later can’t wait for the updates

[@JamesPretty]

ya its been frustrating. the pedal was a necessary evil wished it was the mail problem but at least we are gaining on it.. won't be long now bro

[@johnhanson4795]

i used to drive a 352 pete it was copper with 3 stripes back in early 80s 400 cummins 13 speed was a a78 or 9 i caint remember it had the brown tuck and button interior it was a cool truck air ride.it was taken off otr and could run 5 states only it had like 3 million miles on it been rebuilt 4 times was a cool truck

[@JamesPretty]

nice.

[@pigdog8855]

Get ready to tow it home james that truck aint going nowhere in a hurry

[@JamesPretty]

you're not wrong, but im not giving up quite yet.. this truck deserves to drive home and not get towed.

[@toddsmotucha1285]

Glad you got decent weather there Cpt. Its 15 today with 6 mph winds,no snow on the ground in marinette wi.Typical weather here,except for no snow.I dont know shit about semis so cant comment on why its leaking.If its not welding,or old tractors,1948 - 1960,or chevy trucks up to 1994,I dont mess with it. Cant wait for Ms. Pinky Tuscadero to take her 1st ride back to her new home.Cant wait for Cpt. James Pretty to make her Pretty again.This will be the truck you can take to the airport and not have to worry about some 1 stealing her. Keep up the good work.

[@JamesPretty]

Appreciate ya brother

[@chrisharkins8708]

So closed. But your getting there. Just amazes me how so many just let these trucks sit for years and years. Not hard to just go out and fire it up here and there and keep it so called alive. But I don't know the whole story on this tow rig. But when you getter done she is going to be the biggest eye catcher out there. 1 in a million to say... Also have to give props to Jess for being right there beside you getting her hand dirty. Not to many women out there like that. Especially today. Reminds me of my wife of just over 30 years last September. She be just like Jess getting in there and helping out were ever needed. Team effort...

[@JamesPretty]

We appreciate ya brother. Can’t wait to drive it

[@chrisharkins8708]

@@JamesPretty Very welcome and I know whatcha mean on driving it. Nothing like the first drive. Here's to a great New Year..

[@robertmanley6102]

Also if it has an air dryer the purge valve may be faulty. But my money is on the air governor.

[@coreycharles1220]

Hey did older truck come with air dryers, Isn't that new technology?

[@JamesPretty]

no dryer on this Pete, but the L9000 air problem was the dryer..

[@fstlnj29]

Like the thought process on isolating the tanks. With it opening(leak) and closing would make me look at any place there is a rubber diaphragm or even a soft line to hardline such as an end fitting. Another thought is that if the lines were empty for a long period of time there could be crap in the line or system that causes as failure at a certain psi. This one would be my least likely as it seams to close off and hold a bit of pressure.

[@JamesPretty]

appreciate ya its gotta be something like that. we will get it for sure.

[@TimIvins]

I cant wait to see it

[@JamesPretty]

thanks brother.

[@TimIvins]

@@JamesPretty Ur welcome brother

[@fraserobrien3828]

good luck man

[@JamesPretty]

Appreciate ya

[@Roustabout376]

My dad's old cabover which was a Peterbilt it would release Air while it was airing up check that are punp or the dryer

[@JamesPretty]

no dryer on this jalopy but we seem to be making headway we can hear it we just can't find it

[@markraymond1196]

Its the air governor. Try tapping on it first. It may take off and start working. Sounds like its bypassing the unloader valve on the compressor.

[@JamesPretty]

can't quite get to it without getting the cab up.. maybe I need to focus on that its got stuck latches and one is blown

[@ChristineChaya]

Hey James & Jessica sorry you’re having so much trouble with the air in that truck you will figure it out and it’ll be nice when you’re done! 😎

[@JamesPretty]

Appreciate ya. We will get it

[@shawnjarman9860]

Might be beneficial to fix the line, so you can raise the cab up, then possibly be able to find the issue quicker?

[@JamesPretty]

Ya I actually should have done that. Apparently it wasn’t super hard to fix the cab

[@michaeltorun7421]

Nice shop good mechanic

[@JamesPretty]

Thanks so much for being here

[@josephlawton4525]

Keep thinking positive it will get better for you and so sorry about your TRX that really sucks

[@JamesPretty]

Appreciate ya Joseph

[@josephlawton4525]

@JamesPretty you're welcome James

[@hankstone8336]

Can’t wait to see it move for the first time

[@JamesPretty]

oh me too for real

[@c.eric.holcomb3652]

Mr. Pretty it could be the seals in the compressor

[@JamesPretty]

I wondered if it was that but I swear to god I hear an air leak

[@madcowmark7129]

Cheers James. One for the algorithm.

[@JamesPretty]

thanks brother.

[@schoonymopar]

might have to do like Bruce W. and those guys did with the blue cab over and put a generator/air compressor on the back of it until you find the issue or get a chance to re-plumb all the air system.

[@JamesPretty]

im going to get a smoke machine for exactly this type of crap

[@tommyhall2768]

Good morning buddy's

[@JamesPretty]

hello Tommy thanks for being here.

[@williampepper7839]

There’s gotta be a one way check valve on the tank that sending air elsewhere at 50-60psi air pressure. I start checking all the fittings on the tank. Good luck air leaks suck!

[@JamesPretty]

ya they sure do! we spend a lot of time unhooking lines and capping them one at a time looking for the leaker... getting closer I believe

[@williampepper7839]

@ If you removed a fitting on the tank an aired it up with a compressor. Then sprayed soapy water on air lines you will find the small leaks you don’t see. You will also be able to find the bigger leak you’re looking for now. Good luck though can’t wait to see it rolling down the road!

[@MjK931]

You got to remember it's been sent for 17 years a lot of things go to rotten so you can have a line that's just rott off or a fitting metal fitting

[@JamesPretty]

100% true

[@johnhanson4795]

james love your videos!

[@JamesPretty]

Thx so much

[@johnnyholland8765]

"I have been getting screwed by every single thing I have done" Yes it be that way sometimes my friend it be that way. We all feel your pain and sympathize or at least I do. But we all know you are NOT one to shirk a challenge or throw in the towel. All things shall pass and that ol wrecker don't know who it's screwing with. You will get it going. You know I saw several aircraft contrails in the cold morning air this morning as I looked up and wondered is that James up there hauling the freight again? I have an aerospace background and love old trucks too so that makes us a little alike I guess. Don't get discouraged you will get it done. I want to see you driving that wrecker home....

[@JamesPretty]

appreciate ya brother, we will get it for sure!

[@rondencer5227]

Get small air compresser hook in to tank

[@JamesPretty]

we tried its a large leak. we are gonna get it tho I promise

[@johnhanson4795]

my boss turns 66 monday he used to paint alot of semis when he was younger

[@JamesPretty]

Nice

[@Venomized95]

Its the governor on the air dryer. Its failing under the designed pop off pressure and staying open hence why youre losing pressure slowly after you shut it down

[@JamesPretty]

Could Possibly be. We’re getting after all that stuff

[@alaindunkerque59]

Belle vidéo 👌 😉 James. Sacré travail ⚒️. Respect. Elle aura fière allure cette dépanneuse 👍 🚛 🇺🇸 🇫🇷

[@JamesPretty]

thanks so much Alain always good to see ya here

[@alaindunkerque59]

Merci 👍🇺🇸 🇫🇷 🚛 ​@@JamesPretty

[@pauldillinger2286]

Cant wait to see that bad boy in action.

[@JamesPretty]

Me to brother

[@GeraldGamble]

Shew, look at that work bench, looks just like mine lol.

[@JamesPretty]

hahaha they say genius' are messy. maybe im smat. hahaha thanks for being with us

[@dannyrichardson6319]

They soapy water spray on all the fittings and air lines with air on the truck it will bubble where the leak is

[@jp42283]

Long as yr making progress bro all that matters

[@JamesPretty]

Little at a time. We’re gonna get it

[@MeMe-pj2zl-DDP]

41:53-41:55 into the video you mentioned the air tank it could be a small enough hole in the tank that is to weak to hold and keep the pressure in the tank and it could be the Air pressure relief valve is stuck partly open or releasing the air as fast as when the compressor stops supplying air to the tank by way of the pressure valve that sounds plausible solution try a different tank as I suggested in the last comment ty for letting me share Matt AKA DDP be safe out there My friend and brother and sister and friends and everybody yuuuuup ps it is a little more work but time and cost effective and you do not need that much air tank pressure to just get it home a smaller tank would work temporarily yuuuuup

[@JamesPretty]

I was beginning to think perhaps the tank or maybe even the crossover line from tank to tank but Dang we can hear it leak but can't seem to place it. its loud for a few seconds then goes away can't hear it when its running.. we have a plan

[@goatranchgaming2922]

You should thank Jess for saving you from a massive knot on the nogin .

[@JamesPretty]

hahaha she saves me a few times a week normally shes swell

[@TomCook-q8j]

Use soapy water bottle to spray on fittings and watch what bubbles

[@JamesPretty]

I brought my windex but the pump in the bottle quit.. bringing a back up next time

[@anthonyyoung7344]

Use saopy water in a spray bottle at all the air fittings you will find the leak

[@JamesPretty]

I brought my windex but the pump in the bottle quit

[@duffross4252]

Check the winches that they do not have a air release for them to free-wheel , it may be stuck open .

[@JamesPretty]

appreciate ya

[@UweFranke-o3n]

Good evening there James and Jessica I now you will make that truck agen nice and driver it

[@JamesPretty]

Thanks for being here

[@OldTruckerDrew]

you mean her mom hearing they know 😁

[@JamesPretty]

appreciate ya being here

[@guccilover2632]

is the airdryer any good pump the brakes see if the pressure drops should be around 100 psi and is it sneezing as it fills the 2 tanks either a blockage or the tanks are leaking

[@JamesPretty]

no dryer on this Pete, I think we may have a lot of small Leaks to tend to in order to find the big one.. we are close I feel

[@pavelblazoun992]

Super cool job nice video👍👏🥰🇨🇿😉

[@JamesPretty]

thanks brother.

[@fredschell3972]

Try changing your governor on the air compressor. Just a thought. I'm not sure if that has anything to do with that or not. Good luck.

[@JamesPretty]

could be the governor. can't get to it with the cab unable to go up but were working on it

[@VitaminC440]

Cappy , does the Pete have an air dryer? I've seen many get stuck and bleed air as well as the pull cord bleed valve. Have you checked the air tanks for leaks? I saw a tank with a rust pin hole in it that was not seen but heard. You'll get it For sure...

[@JamesPretty]

Nope no dryer on this Pete. We did soak the tanks with Windex. No leaks there were close I can feel it

[@maxpuppy96]

Check your air governor.

[@kennethhinzman2336]

Builds up to 50 sounds like it’s kicking over the secondary air tank and when it kicks over that tank it’s where you’re losing it

[@JamesPretty]

yep thats what I was thinking we soaked that tank with no obvious leak. we are tracking every line off that tank currently

[@ralphups7782]

i would put the anti seize, on later back at the yard. on my headphones the air leaking was coming from were you was sitting, would the air to the chair maybe a valve make a leak like that.?

[@JamesPretty]

I thought it was also the air seat. but no dice. were getting closer

[@TimIvins]

Nice

[@JamesPretty]

thanks brother.

[@TimIvins]

@@JamesPretty Ur welcome brother

[@LloydLetsGoOilers]

chrome it up captain, get it done by Bruce and Timmy

[@JamesPretty]

Maybe it will happen

[@aksyoutube9082]

Is there any way to add an airline fitting and air the truck up with a portable air compressor so you can keep it pressurized as much as possible with less noise to hear where it’s leaking from? That’s what our mechanic at my work does.

[@JamesPretty]

ya we were trying to do it with another wrecker but it loses air faster than the other truck can keep up. we tried running the Pete and the other truck as well but that made it impossible to hear. I think were gaining on it

[@TimIvins]

Be careful u dont shock urself James, I the its not turned on but still u never know brother

[@JamesPretty]

true story bro

[@TimIvins]

I know its going to take time to get er done

[@JamesPretty]

yessir, I am anxious to drive it home where I have all my stuff at my disposal

[@TimIvins]

@@JamesPretty Yes Sir , brother

[@robertmanley6102]

Does it have an air governor? That's like a 15 dollar part and will keep the truck from airing up. Also when you get it to 50lbs. Do a pump down on the brakes. Sometimes that will get things moving and will fix a problem if the air is leaking because of a stuck brake or valve.

[@JamesPretty]

yes could be the governor can't get to it without the cab coming up and the latch cylinders are blown. we are working towards that now

[@nelsonmattoon150]

At least you can now say you own a Peterbilt

[@JamesPretty]

hahah this is true, thanks brother

[@johnnybgood2437]

Is there an old malfunctioning air dryer on this truck? I would also check the air governor on the compresser and replace it if necessary??

[@JamesPretty]

No dryer. Could be the governor. Gonna see if we can get the cab up maybe

[@johnnybgood2437]

@@JamesPretty You're gonna have tp get it up sooner or later...Lol!

[@TomCook-q8j]

Use dish soap and water, good luck, get spray bottle from anywhere

[@JamesPretty]

we brought my windex bottle but the pump in it is busted we will bring a back up bottle

[@manjodhmaan5203]

😮

[@MeMe-pj2zl-DDP]

One last thing to consider does any of the Crane components work on or will the air pressure system ???? maybe a valve is open and or leaking from the Crane system I highly doubt it but maybe yuuuuup

[@JamesPretty]

I had considered that but I cannot see any hoses going to the back other than brake source, brake relay and diff lock

[@Roustabout376]

It's the air dryer

[@curtfenslau3645]

Check for a tractor protection valve

[@JamesPretty]

doesn't have one that I can find.

[@youtubeisawesome2487]

@@JamesPretty it has one, just not the flat ones you see today, should be round stacked and look similar to the foot vavle body but smaller. it had a trailer knob so i bet its still on it.

[@JamesPretty]

@ maybe. I just can’t find it

[@randyhathawy7514]

I think you need an air governor James on your compressor

[@JamesPretty]

Could Be. I can’t get to it cause the cab won’t go up. But I will get to it and check it out

[@randyhathawy7514]

@@JamesPretty I'll be watching to see how it goes . Good luck with it James

[@JamesPretty]

@ thank you

[@toddfrisch737]

I really enjoy your videos. Could it be a broken hose that opens up at 50 psi

[@JamesPretty]

im beginning to think its something like that

[@toddfrisch737]

I know your pain with hearing. I’m deaf in left ear and it’s a pain in the but to hear for things. Good thing you have the misses

[@rustyrhyne1476]

Don't worry I have done the same rework. You're doing it. Instead of Not!

[@JamesPretty]

appreciate ya

[@ramonrivas2606]

Hi James did you check ✔️ you're air supply lines or the air dryer?

[@JamesPretty]

yessir

[@Roustabout376]

Who's to say there's not some air stuff hooked up to the tow system on it but something tells me the dryer

[@JamesPretty]

no dryer on this old gal, there is a weird spit valve but I already bypassed it