Handy Gadgets for Easier Installs [video 341][Gifted/Ad**]

In this video I’m talking you through a brace of #handy #gadgets that made life much easier on a recent #install. Enjoy!
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video, and I have no financial interest in the product.
+++++++
My ‘social’ links in one place - bit.ly/10minute-links
Support me directly - bit.ly/donate_to_10minuteworkshop
Support me on Patreon - / 10minuteworkshop
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram - @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Used/featured in this video:-
SBT_Design TheBlockScribe - bit.ly/blockscribe
SBT_Design bench plans - bit.ly/minibench
U-scribe jig - bit.ly/u-scribe
Space Plugs - amzn.to/2KgmmLU
++++++++
Useful workshop bits & pieces:-
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Bradawl - amzn.to/2qWTbln (US: amzn.to/2pZqVRm)
Mirock square - etsy.me/2MC0RTZ
Plastic packers - amzn.to/2vCDN27 (US:amzn.to/2vHk4fZ)
Moldex 6810 in-ear defenders - amzn.to/2sTwQJE (US:amzn.to/2sThGo1)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Braided hose sleeve - amzn.to/2puFkWd (US:amzn.to/2oqbQsi)
Polyvine PolyTen PVA - amzn.to/2HBxK66 (US: amzn.to/2rmHYL3)
+++++++++

[@JoelAaargh]

I used the smaller space plugs when securing a large chest of drawers to the wall in my son's room, just the job for bridging from the inset back panel and over the skirting!

[@harrybobs4014]

Space plugs were a fantastic purchase in my recent kitchen installation. Big time saver so thanks Peter.

[@10MinuteWorkshop]

Cheers Matt - great, aren’t they? 👍👍

[@jetset9561]

Thanks for reminding me about Steve's award winning mini-workbench - I downloaded the plans for that ages ago but put off building it until I passed the threshold to purchase a Domino. I got that months ago and have been amazed how much easier it has been to put carcasses together - and completely forgot about the workbench I had planned to make!

[@10MinuteWorkshop]

Easily done! And yes, Steve’s bench is a fantastic design! 👍👍

[@andrewl9332]

Never used the Space Plugs for the intended purpose but I have used them as adjustable feet. My workshop floor is not exactly smooth and level!

[@GrahamDIY]

Great tips. Thank you Peter.

[@karlpopewoodcraft]

Looking forward to seeing how you use these Peter as I think I'll be using them in the future. 😊

[@michaelburton9638]

Nice tips Peter, I've used the orange space plugs , they are great , before that I was using scraps of wood and packers to fill the gap. No more of that messing about.

[@10MinuteWorkshop]

Exactly, me too Michael - scraps of wood and wedges! These are just so much neater. 👍👍

[@carllamb6711]

Hi Peter All three are very useful as I’ve used them myself in the past as a Kitchen Fitter they work a treat and save so much time and effort great video mate still catching up on everything you’ve done well I’m trying 👍👍👍👍

[@johnfithian-franks8276]

Hi Peter, love the bright colours, but even green can get lost (you could only find 2 of them). I have had a very frustrating week braking down pallets, even though I was seated all the time I would put something down and then the next time I wanted it, somehow it had disappeared.

[@dlamb2840]

Peter. I’m stunned by the AMAZING Finnish you achieved with that last project that you showed at the start of this upload. Absolutely stunning end result. I’m not surprised, but seeing that bit of footage just refreshed me on just how meticulous you clearly are with your projects. Absolutely inspiring. If I ever win lotto and get a mews in Mayfair YOU will be my (and Lynnes) choice for fitted furniture!! Fab!!

[@10MinuteWorkshop]

Thank you! There’s a bit more to come on that build, so stay tuned... 👍👍

[@keithstanley2007]

As always a worth while video to watch. I am looking forward to the wardrobe build video as well!!!! Many thanks for your great videos!!!

[@10MinuteWorkshop]

Cheers Keith! 👍👍

[@peterfitzpatrick7032]

The thing about designing a product which can easily be copied is that regardless of "copyright" & "patent"... if you don't have the not inconsiderable resources to enforce them then they are a waste of money. 😒 Soo... what to do in this internet age of rip-offs ?? Build customer loyalty... 🤨 Big brands create brand loyalty by treating their customers differently... customised service, extended warranties, free advice re. product use etc... & if possible they innovate & produce a product not easily or cheaply copied. 👌😏 I had this very same problem 30 years ago when one of my products , a steel removable bollard to prevent car theft (rampant at the time) from ones driveway, started to get popular. This was noticed by others & as the product was a simple affair, copycats started appearing. BUT.... as I also did timely & professional installations , I had my products electroplated & I supplied a high quality padlock as standard with the product, mine stood out & being a security product , customers wanted quality assurance, so my customers mostly came through "word-of-mouth". The oppositions (several copycats) products were shoddy, cheap-&-nasty & their customer service was non existent. I also developed a newer heavy duty version with a built-in lock at the TOP of the post & supplied & installed a wall bracket for storage... this new version needed milling & turning facilities in manufacture & my "competitors" were simply guys with a welder... I went on to manufacture & sell SEVERAL THOUSAND of these products for nigh on 15+ years & in fact supplied to commercial premises & even local council departments.. why ? because of my reputation... 😎 Long story short... innovate or die... if you have an easily copied product, sell as many as you can BEFORE the copycats catch up... then move on & come up with something new.. there is NO way to stop copying... in business you just learn to live with it. 🙄😒 Rant over... 😎👍☘

[@peterfitzpatrick7032]

Nice Pete... these gadgets really are like an extra pair of hands, particularly when working alone... 🐙 Good job giving the lads a plug, I'm sure they really appreciate the honourable mention on the PM channel... 😎👍☘

[@10MinuteWorkshop]

Thanks Peter! Always happy to give a solid product a bit of exposure, and all of these are well deserving. An extra pair of hands, indeed! 👍👍

[@raysmith1992]

Thanks for another brilliant help and informational video 👍

[@10MinuteWorkshop]

Cheers Ray! 👍👍

[@willford8475]

I had this type of built-in wardrobe system in the first house I bought. The problem being it was on an outside wall and in Autumn/Winter they got damp inside and even mold could grow on the walls. A right royal pain in the sitting down area!

[@theartistformallyknownasdi5338]

I've seen that a lot, you've always got to have some airflow.

[@thomasfholland]

This should be fun!

[@David-xu3yk]

I saw those orange spacer plugs on your insta pic of the build and wondered what they were!

[@gvanvoor]

In case someone else outside the UK wants those space plugs: on Amazon it looks like only the small ones will ship outside the UK (for Belgium this would cost a staggering £120 for a 10 pack; I’m guessing the seller accidentally added an extra 0 but wouldn’t take the risk); they’re out of stock at Screwfix but available (at a slightly higher price) at axminster (and shipping rates are reasonable there).

[@10MinuteWorkshop]

Thanks Gregory. You can also buy direct from space-plug.com 👍

[@adamhasan4736]

Great little vid - really useful tips - looking forward very much to the scribing video.

[@10MinuteWorkshop]

👍👍

[@stevewalker7822]

Like these gadgets

[@peterlondon1976]

Great video Peter really enjoy watching it. I very like space plugs and scribe block not so much “dolls chairs” for this sort of thing I’m using offset dominoes so no screws holes at all. 👍👍

[@10MinuteWorkshop]

Thanks Peter. Whatever works for you - the screw holes do rely on you using concealed hinges to hide them behind, of course 👍👍

[@u-scribejig4740]

The screw in the seat position of our u-scribejig allows for face fillers as to not damage the inside edge of the filler or facia so you can create flush or face fillers damage free

[@lewiscunliffe1051]

I don’t have one of those scribe blocks yet but then I have the trend easy scribe, maybe it would be handy to have one in the toolbox i suppose. The U-scribes are excellent, little third hands/tools and I’m very surprised they hadn’t been invented sooner welldone to those lads for bringing them out. Space plugs work great for wardrobes but even better when fitting kitchen units etc when pipework or electrics have been put in wrong or right in the way of the fixings and these little orange life savers avert the issue, also it’s great they provide an extra long drill bit for them. Nice little video as always peter 👍🏻

[@10MinuteWorkshop]

Cheers Lewis! 👍👍

[@u-scribejig4740]

lewis cunliffe thanks Lewis, glad you like our #3rdhand on the job 👍🏻👍🏻

[@animationcreations42]

Well, I think I'm going to have a bit of fun 3D printing tonight!

[@james6609]

hi peter great items to have and congrats on 40k regards james

[@10MinuteWorkshop]

Thanks James! 👍👍

[@lobbylobbster]

Still got them side tables I see Peter 🙈😂😂😂😂 great tips as always. Cheers

[@10MinuteWorkshop]

Dont’t. Just... don’t 😐🤷‍♂️

[@lobbylobbster]

😂😂😂😂👍🏼

[@peterfitzpatrick7032]

@@lobbylobbster Blue Peter !! 😈😈

[@Bill.L.Carroll]

What is that in the background there, oh they are the thing we dare not speak of! 😂😂😂 Some great time saver little gadgets there, mate. 👍 Well worth the money, aye! 👌

[@10MinuteWorkshop]

Shhh! Don’t mention the... 🤭 😂👍👍

[@Bill.L.Carroll]

@@10MinuteWorkshop 😂😂😂😂

[@AndyTaylor_Paintguy]

I used Space Plugs for the first time the other week while fitting some kitchen units. Fantastic piece of kit, simple but very effective.

[@10MinuteWorkshop]

Agreed, they’re so, so good - simple, clever, well priced. 👍👍

[@garvielloken3929]

NOOICE!

[@SBTDesigndotcodotuk]

Thanks again for the mention and inclusion in your video, I really appreciate it. I've not had a spare second to watch this yet, but I'll be on it as soon as possible. ✌️❤️ #theblockscribe

[@10MinuteWorkshop]

Pleasure Steve! Getting a fair few hits on the links, so should be generating a bit of interest 👍👍

[@SBTDesigndotcodotuk]

@@10MinuteWorkshop yes, getting interest via email. Amazing! 👍

[@10MinuteWorkshop]

I'll let it run for 24 hrs then send you the stats from my links. 👍

[@u-scribejig4740]

It’s a great version of a simple idea that you have improved on Steve. 👍🏻👍🏻

[@noskills9577]

Your item and u scribe are completely complimentary, if your not already (???) Selling the two products in the same web shop makes a lot of sense - your probably already doing that tho so dont mind me 😂

[@blackadder1966]

Looking forward to that scribing video

[@SpacePlugLtd]

Can't thank you enough Peter!! Came out of the blue to me!!! I'm the inventor of Space-Plug and a former fitter myself ... I've now put over 3 million little orange doofers into the world and we are increasing in popularity every day :) If anybody wants some more info I hope you don't mind if I suggest they take a look at space-plug.com ... I'm in the middle of tidying Amazon listings and bringing down prices!! It will all get sorted but I'm happier with Makita than Dell !!! :) You can also find us at Howdens, ScrewFix, ToolStation, Axminster and more... Thanks again to you and all for some very kind comments!! All my very best Cliff

[@10MinuteWorkshop]

Pleasure Cliff - it’s a great product you’ve made 👍👍

[@gregorylondos534]

I like the yellow Pencil Scribe block and the Orange Spacer/Shims... Two sizes you say...? Greg

[@10MinuteWorkshop]

Yep - large & small.

[@ir7868]

Brilliant information Steave Can you make video how use this all gadget , practice life is different. Thanks

[@10MinuteWorkshop]

Thanks. 3 part series about scribing starts at video 352, Scribing P1, kzbin.info/www/bejne/nWG6Y2aYqrSapac. And who’s Steve? 😂

[@ir7868]

@@10MinuteWorkshop brilliant , I’m going to subscribe your Chanel, thanks

[@markbryan9989]

Now if they could just make them in Imperial, they would find a large market on my side of the pond. Peter, nice install! Are you doing a video of the install?

[@10MinuteWorkshop]

Haha, thanks Mark! No, no time to shoot the full install, but I did a few bits and pieces that I’ll add into the build video, when that happens 👍👍

[@u-scribejig4740]

Mark Bryan our products cover board sizes so work here or in the US 👍🏻

[@2010fam1]

Hey there Peter thanks for the Videos always enjoy them. Interested in the Vac hose clips you mentioned . They would definitely help in my shop. Are they available in the US ? Thanks, Frank

[@10MinuteWorkshop]

Hi Frank. Do you mean the hose clips I mentioned in the current gift ideas video? I’m pretty sure Strawbyte ships those globally. 👍👍

[@MrMoxyrocks]

Hi Pete. Nice video. Question for you...I do love the concept of the Uscribejig, however if the filler is set flush with the facia front and not set back with the carcass(i prefer my fillers to be flush with the finished product) are you not then left with a hole to fill where the screw has been? Admittedly this hole would be on the edge of the filler and not on the face so would be partially hidden by the adjacent door, but in certain cases i guess this could pose a problem. *enter wax or "fastcap" Keep the videos coming. All the best.

[@10MinuteWorkshop]

Thanks! Anything that’s screwed through the interior side of the carcass has the fixings hidden behind the hinge plates, or the hinge arms. I’ll be talking about this a bit when I go through the install on the wardrobes 👍👍

[@u-scribejig4740]

Cris Marriott it works for both, you can use he screw in the seat position for face fillers so the inside edge is undamaged 👍🏻👍🏻

[@casparvanderburgh]

Wait, portable bench, did I miss that video :-) ?

[@10MinuteWorkshop]

Nope, still on the old portable bench! Really, really needs replacing, must get around to that... 😆🤷‍♂️😂👍

[@afbigfish1]

One word "THINGAMAJIG" scribe tool

[@Mishkacat123]

Peter, what happened to the video about the rip off? saw it earlier but has now vanished.

[@Mishkacat123]

Whoops just seen your post lower down - sorry

[@10MinuteWorkshop]

No worries - I deleted it; the comments were getting out of hand, and neither myself nor the other parties involved have the time or energy to deal with people who just want to argue. The video had served its purpose though, and thanks for taking a look. 👍

[@wayneuk]

why do you support the cloned goods of trademarked products

[@10MinuteWorkshop]

I don’t - what products are you referring to?

[@brizzleben]

Saw that today's video about the clown who'd copied the details of these Peter. Good on you. Saw also that that video's now been blocked so I hope that gesture of solidarity hasn't earned you a headache. Best wishes, as always.

[@10MinuteWorkshop]

Thanks! I took the video down as the comments were getting all a bit unnecessary, and myself and the injured parties have better things to do than argue the toss with people on the internet about copyright violations, intellectual property rights etc.. etc.. The video has done its job to highlight the issue, and hopefully with enough objections the plans posted to whatsit-verse will at least be reviewed appropriately. Must admit I was slightly taken aback by the number of people who simply seemed to want to shrug this off as ‘one of those things’. 🤷‍♂️

[@begawanwong8217]

To much talking.

[@10MinuteWorkshop]

Too much typing - yet too few letters... 🤷‍♂️

[@mattsidebottom7603]

@@10MinuteWorkshop well played sir