N600 Should Have Been Made This Way! Efi Conversion Episode 3

Get your Pfispeed Fest here
checkout.squar...
Welcome back all my friends!!
We are Making Great progress today on the N600 fuel injection project!
In this episode we get our Fuel injection bung and get that out together!
Jamie build his first wiring harness and we get that in the car! We then mount the coils! This little car is looking so Rad!!
Need Race parts or Merchandise!
pfispeed.com
[e-mail]

[@jvepps]

This N600 side show is friggin AWESOME!

[@JBM802]

Needs an mpg tune, I want to see some 100 mile trip numbers.

[@Wreckedekcoupe]

Shout out to a healthy Brent and these rad daily uploads!

[@MrT00kie]

N600 build is awesome. Upgrading to a modern fuel system without dropping the entire savings at it. Keep on going.

[@ThomasJoseph315]

These last few video's have been really fun to watch! Thanks Brent for always being positive!

[@VottyS]

PFI is back in the groove!! Let’s GO!!

[@SteveMacdaddy]

Billy the Kid wad drilling into a tank with fumes and had it burn his face,head and arm. The spark inside the drill caused an explosion. He said I should have put some water in it!

[@SteveMacdaddy]

Even though it's not the project we would like to see him working on ( sho nuff). It's great to see Brent working on something that makes him happy!

[@IndianaDipper194]

i wanna see him working on whatever he wants to work on! that little n600 is rad tho so im deff not mad, and im just nerdy enough to care about what it takes to fueltech swap one. hopefully turbo one day? :) little turbo noises would be dope.

[@danielhiemstra3834]

@@IndianaDipper194facts its ficking dopeeeee

[@VFR75O]

BULLY

[@therealpaddy4687]

Finish as you mean to go on.

[@aubreymorris9183]

If you want to see him working on that, why don't you send him the parts/funds he needs to fix it, instead of just being a pest in the comments. Go watch the beginning of the second video of this series and actually listen to what the man said on the topic you're complaining about.

[@sodakseaman]

n600 content is dope

[@b-rad3423]

I love this Hoser Honda build. It’s so rad. Amazing energy Brent.

[@UKDrew]

From a Guy who suffers from Depression .... Thankyou.... Your enthusiasm and Attitude Has Really Helped me ,get through Things ♥

[@Burnit53]

Best practice to weld a fuel tank is to flood it with Argon, like when welding stainless turbo hot pipes.

[@jesseshort8]

Such a cool little ride Brent!

[@ZNA03]

Watching with my coffee tomorrow morning! Popping in to say Loving the daily videos and the progress!

[@smithjohn3080]

8:02 do you guys just slap eachother and claim "got the fly"?😂

[@scottwhitney4461]

This is bad ass. A new segment called "build it from the yard" use all parts from the PFI parts yard.

[@davidgough1161]

I love this! These cars are very important in the history of Honda USA! They are very cool in the history of the company,

[@kpopRC]

love the series Brent!

[@benwalker740]

Still love the fence post cap, love how you made this with everything you got lying around. And looks cool. Sweet job.

[@georgem.6136]

Woohoo, man we are on a role with the videos!

[@marcmalek5956]

I love Brent’s excitement for this project. The same vibe and energy as always, but just a little more. Such a cool car. I’ve been dreaming about one for a while. Keep on feeding us this great content and we’ll always return the love. Let’s get some more subs for my boys. 🤘

[@ryanward4728]

Ohhhh the thumper engine! I rode a Honda CB that had an engine that both pistons were in sync. Sounds cool. Seems like tuning should be piece of cake!

[@codypatrick5559]

Sick build bro. It’s just cool to see different stuff.

[@chrisabernathy1082]

The Honda S600 were really cool little convertibles. But the N600 was just so dang cute. I'm 6'5" and took the front seat out to drive one once! Lol! It was like Hightower in Police Academy! You are RAD if you get that reference😂

[@brianshannon9289]

Love your work buddy ❤

[@timlynch969]

If you need to remove the flywheel I have the tool, maybe two of them.

[@PFIBrent]

i sure might!!

[@vicespence2145]

Great video love watching your channel please guys like comment and subscribe. Big fan from South Africa

[@Shadow0fd3ath24]

Good idea on the water through the tank...Billy from Street Racing Channel was using a drill in his and the tiny spark from the drill lit his tank up and gave him some NASTY face and arm burns!!

[@LuisLopez-PR]

That's awesome .I would like to go to that event but to far for my.. Hopefully bring a e event like this in orlando Florida Good work in that project 🎉🎉

[@budddove6480]

Billy from SRC is yelling at Brent through his phone for sure. Don't do it bro.......nooooo!!!!!

[@maxst2]

Hey Brent, with the Chevron ACT stuck down, I hope that will turn to dismissal on your court case (any updates on it regardless??? Its been awhile)

[@Cekmore]

My bestie and i were both born in 79. She had a 79 civic wich is the granddaughter of the n600.she traded it in at 300k miles for the 02 si ep3. Wich i now own just past 250k m 💪💞

[@mm-ui9bc]

See you build an intake makes me rethink a project I don't have all the tools to do. I've wanted to vband the throttle body onto my RBC intake to see if there is any power difference clocking the throttle body different ways. All because I noticed my ZDX spacer changes the orientation some. My 8th gen is N/A and trying to get everything out of it.

[@goodridence315]

Brent, I don’t know what kind of back problems you’re having but I know how serious it can be. I’m 32 years old and I’ve had three back surgeries in the past two years hundreds of hours of physical therapy and procedure after procedure with pain management. The two biggest things I’ve learned is keep a bottle of Advil dual action close by and don’t let your ego mess with your healing. I wish I learned that second one sooner on more than one occasion I didn’t listen to my body was telling me to take it easy or take a day off And I tried to “tough it out” and ended up injuring myself all over again. At this point, a good chunk of my spin is titanium so I can’t be injured again, but the pain is still very much there. You just have to keep on keeping on.

[@lmj420]

Well Yeah! Simply take a B series and cut off 1 and 4. It's still a 4 stroke, so 1 cylinder is compressing as the other is exhausting.

[@joeydohner1389]

This is great!! 1800hp coyotte back to the 2cyl honda project and the same excitement for both!! I love car people

[@jasonanderton3050]

I have a new 450 I’ll sell. Has nano, smart coils, and sensors. Bought it for a project then changed directions.

[@That1E_K1129]

Brent you should legally change your name to Honda Ghandi. 😂 Edit: another thing, dude your chuckle cracks me tf up 😂

[@timelliott1135]

The phallus of fuel

[@Shadow0fd3ath24]

Man 1800whp in that car is NUTS, doesnt even look that agressive till you see the lack of mirrors and big tires

[@michaelokeeffe490]

I’ve just priced up a ft550 for a project and bloody hell they have gone up in price A LOT

[@brentanthony701]

I really like how you guys figure out shit. My wife never could understand that cause you know that's what men do. And o yah fence post cap for the 🏆 ✌️.

[@lonnieboothe7973]

Brent brother inlove your enthusiasm you positive vibes the good juju u push put is always inspirational. Keep it coming love what u do forehead car community and your friends and family

[@RuckusGarage]

Let me ask you something. When you come in on Monday, and the car’s not tunin' real well, does anyone ever say to you, 'Sounds like someone has a case of the Mondays'?

[@krazeemazee]

you can fire both the plugs at the same time...one will always be on exhaust open so it doesnt matter.... harley davivson did it forever they prob still do it with modern fuel injection.... makes life simple

[@bobbystalder3323]

Love to see you guys fix or restore everything make e it better like suspension parts make that thing dependable to drive 500 miles no problem!!!!!

[@stoker20]

The N600 and the CB750 came into the dealership at the same time. I had just graduated HS and didn't want to ride a Honda MC through another winter. Mine was yellow same as that. If you shifted hard and cranked the wheel the inside tire would bark. Still have the window sticker. MSRP $1,395!!

[@Mrs3Diddy]

If you purge the tank with 75/25 and keep it flowing while welding you can do it with fuel in the tank no oxygen on fire

[@tomlanore4283]

Billy the kid from street racing channel had rumes from a plastic supra tank flash up on him a few days a go. Burned his face and right arm. He used a cordless Milwaukee drill to drill a hole in the bottom for a fuel line. The drill has brushes and sparks when the trigger is released. Billy said the fumes ignited after the 3rd time he released the trigger. The tank was empty but he didn't do anything to vent out the fumes before drilling.

[@gemini3558]

Let’s go !!! Pfi speed Rocks !!! 😜👍🇦🇺

[@pFbSpecV]

So glad to see the mustang back and putting down some awesome numbers! The n600 is coming along tho!

[@tommeboy3334]

Outboard motor use what is called a wasted spark coil. You need one coil. It has 2 leads out put. It just fires every other time to spark. look it up it is the answer to your problem if you have time. and you dont need the diributer. just a crank signal to tell it when to spark

[@bobfeber1099]

I have a 78 civic with an 81 accord motor in it so 1.6 l I always wanted to put my fuel injection from my 91SI on it

[@user-vt5lm6tk1k]

I think it would be wise to stop dyno testing with the hood up after the other day. That could have killed someone! ..just saying ❤

[@ryans87supra]

So on a real note my donation of the spearm I have for myself is named John Jenkins to my question is I got screwed on a cool dad does he want to adopt me im 2/3rds useful on pretty much everything lol id be the best son he'd ever ask for lol

[@HitokiriRaiden]

Love this little car definitely gonna be a fun little ride. And good call on the watering down the take just the other day billy from street racing channel got badly burnt using a drill on a fuel tank and the drill set off the fumes and burnt him pretty bad.

[@Chris-de4km]

I got a random Idea I don’t know if this is possible but it would be kind a cool if you were able to put some custom vtec cams on this 2 cylinder 😈

[@stijntossaint5878]

Do not forget to add a stealth battery charger connection on the N600 for when you having it sit for a few weeks. You can then have it always ready when you want to go for it.!

[@anthonygarces8617]

Cyote swap sho nuff Whether it's four cylinder or a v8 We just want to see you go fast, Brent. You deserve it

[@mikereagan5861]

A older waste spark ignition coil from a harley would fit your ignition needs perfectly!

[@whipplecreekracing]

Little side thought I had....that manifold could use some support brackets to help it from vibration cracking it. It's kinda heavy looking for such a small connection at the flange.

[@ThatGypsyBoy]

Happy Fourth of July everybody Everybody be safe 💯🇺🇸(PFI)

[@whipplecreekracing]

You're efforts the past few days have been great. You're doing a wonderful job staying on point w a project of your own again. I love that this car gets you laughing at how simple it is. I feel ya dude lol. Hope PT is going well. Catch ya on the next one 💪

[@bobbystalder3323]

Lot of people wouldn't want to drive that car but it's gonna get ya there and sure beats walking!!!

[@keviincullinane8550]

Yea Billy from street race channel. Just got burnt drilling into a plastic gas tank.. Brent u smasart

[@Finnspin_unicycles]

Hooking the (empty) fuel tank up to the exhaust of an idling car is what turbo yoda has been doing apparently. The exhaust gas warms the tank so any residual fuel evaporates, but since it's exhaust it hasnt got the oxygen to burn. Might be worth doing as an extra precaution after rinsing with water, I've heard horror stories where there was still some residual fuel left even after flooding with water.

[@rogerf7265]

When I was a kid in the 70's a friend's parents had one of these that was orange. I thought it was a cool ride back then and I get just as excited to see them nowadays as I did back then.

[@mikellewis2346]

With the fuel tech system it be super sick to add a tiny turbo on this small motor like kyle did his shopping cart. Looks so sick tho as is for now with new intake. ❤

[@mattclark420]

I love the fence post cap on the manifold. So perfect

[@justinrupert7233]

Reminds me of an old British motorcycle parallel twin with a wasted spark setup.

[@michaeldaniels1472]

You should have Emilio paint the 600 when your done mechanically

[@billwilliams2242]

Billy from SRC just had a fueltank fire , flushing or dry ice is the way to go

[@RogerFleury-rh9wr]

47th! GO BRENT GO! Roger in Pierre South Dakota

[@yasmanibarajas7278]

Man, I wish i could attend the event. Must be so nice! I'm stoked for you all.

[@LearningWithTitus]

Lets pull the log . Pic of mechanic pulling string on a jack in the box on a shirt would be cool

[@ALR74]

I like the editing of seeing a dyno pull and level out to 1600hp and you cut to the N600. 😂 @23:35

[@lonnyself3920]

Colorado fly's bite , love this project I miss my old stump jumper .

[@tezzrterry7485]

Neat little Hondas, most failed when the air cooling fan belt broke, and not replaced, leading to a seized engine.

[@chriscole1726]

Just won 11.50 index in my town

[@PFIBrent]

come out and rip with us!! good pay day to win

[@philfriesen312]

2000hp with that little cage looks like if he wants to run that he's still got some upgrading to do

[@ckfpv]

My buddy had one of those back in the day havnt seen one in along time 💯💯💯looks good Brent

[@ManiacRacing]

This little buzz bomb is just cool! Keep up the awesome fun content Just proves it's not always about sheer horsepower!

[@momentummotorsports6137]

The whole PFI team is awesome i love the figuring things out you guys are great for the world

[@jahraizer250]

That mustang was outrageous!!!

[@Ziesingracing]

Where is the bully ? Is the poor tjing stuck out side or is there another garage where you store the race cars ?

[@67stang65]

As seen as I seen that gas tank and your plan with it I seen @billythekidsrc from @streetracingchannel just did with @missmollymak gas tank on her Supra and badly burned his face and arm and I got instant flash back (literally). Glad you filled with water to remove the fumes. So thankful people are learning from others mistakes

[@jasonalmont7572]

Itchin for the next post on this little hot rod man! Always loved those things.

[@gargantus5]

Would Love to see a comparison of the original fuel mileage and the current EFI !

[@nichalousbarker3142]

Smog test it stock, then smog test it with modern technology and send the results to the EPA

[@DuvalGarage]

Glad to see you back posting content. Keep going brother.

[@srt4ruffin555]

lol the intake manifold looks like a something out of a Colorado smoke shop 😅. So badass tho!

[@Glen_Patti_H]

Thinking "outside the wallet" is my nature. Loving this build !

[@Jcarney87]

Those pistons may mice together but how do you know they’re both on the power stroke together ?

[@tavio5574]

Maestro Brent and Maestro Jaime!! Awesome content every time!!!

[@markchapman2585]

Go from 34 hp car to 2000 hp car. Living the life 🍻

[@sutherlanddetweiler1616]

So, my lemans won't be the slowest car on the pfi dyno anymore?

[@lilljjr1866]

tapped on the vid had come back for these daily builds nice part of my day

[@terrybanks3877]

So who's having the baby girl!! Was in the last video

[@markiex7]

First video wachting of it but would love to see this as a drag and drive build !

[@waynesworkshop7069]

This project brought me back to the channel!!!

[@ThomasSpencer-zn5ng]

Go grandpa Brent welcome to being a grand parent hug them love them