Phantom 4 pro Gimbal overload

[@TheDronzDr]

I remove my cover and it fixed my the same problem that you were having. I also took the cover and craved it out around and put it back on and it work fine know. Turn your camera straight up when you put the cover back on and at the same time put the two screws back in the cover. When you do this, the ribbon gets tighter so you can put the cover on and the ribbon goes into place. Christopher Posey thanks for this video. It was a lot of help for me.

[@mindiashavadze5001]

The Dronz Dr Help me, I have some problem

[@DroneLifeLelystad]

earthquake mode? i haven't had that on my P4P+. bummer dude

[@YL-mc9oz]

Hello, I have a question please: Do you happen to know if it is complicated to replace the PITCH MOTOR of the camera in the Phantom 4 Pro? Thanks in advance

[@hilux2727]

I have the same problem .... what's the fix? I usually Turn it on and off and it stops, temporarily.

[@creature57]

I have this issue right now as well. Non responsive gimbal. Help if you can. Mine is trying to calibrate now but it's stuck moving to one side at 68% and it won't go any further.

[@phgv2206]

Mine does the same thing. As soon as I start flying it stops.

[@Ron46143]

The problem is the ribbon cable is too long and rubs the inside of the cover that protects the cable. I removed the cover and have not had the problem since.

[@eric9964]

Ron Richardson did yours make a clicking sound when you moved the camera pointing down?

[@Ron46143]

Yes the cable would click every time it got to a certain point.

[@eric9964]

So what cover did you remove? Also if it is not a problem currently, should I try and change it?

[@Ron46143]

If you are not having a problem I would not change anything. The cover I took off covers the gap between the gimbal motor and the camera and protects the ribbon cable. It's held in place by two screws.

[@ΓιώργοςΚολλιας-β3σ]

Hello, can i ask you how you solve this problem????