Picking a fast 50cc, Echo 4910 Sawfest build, Filter test

[@windingtrail9319]

Nice work, sent you an Echo 4910. Have one problem now, it’s the only saw I use!! My others collect dust. May have to send you another… I will say, that Husky is a beast!

[@happy8637]

Definitely a nice little egg at the end of the video! Dang that 550 cuts good!

[@skrompf]

Great content, Joe. Thanks a lot! Personally i love the 550mk2 so a bit more of that would be great. Just got mine back from port job. WOW!!!

[@johnclarke8180]

Joe, love the content. I appreciate all the hard work you do for the sport. Thank you!!

[@dynojoemods2764]

Thank you for the support!!

[@AndyAlaska375]

Excellent video Joe.

[@Houseworksaws]

Can’t wait for SawFest.. No denying those 550’s are fast. I was REAL close to having it last year 🤦‍♂️but that’s racing.. oh well better luck this year. Good video Joe

[@dynojoemods2764]

If it weren't for the racing part I would be very good at racing.... lmao It should be a very good time, cant wait to see everyone again!

[@Houseworksaws]

@@dynojoemods2764 One of the best parts of SawFest is getting to see everyone. For me it’s the one time a year I get to see most people. Truly a great event.

[@coxsaws]

Nice break down on the 50cc s

[@justinweaver8107]

Love these saws

[@Super-Dave-Outdoors]

I think the 490 could be a contender if the transfer caps arent a limiting factor. I seem to remember 125 or so being about as high as i could get them.

[@dynojoemods2764]

It will be interesting, hopefully they can make some good power. Might just have to try tilting them some

[@tedneitzel]

Good stuff

[@michellatour150]

I'll be looking forward to the coil swap results in the 490 as mine is mildly modded but still running the stock coil.

[@dynojoemods2764]

Other than better high rpm for tuning etc I dont expect too much from the coil swap alone.

[@michellatour150]

@@dynojoemods2764 That's where I'm at with my mods, pulls a 20" bar no problem, great midrange torque but could use some more rpms.

[@trvr_inds]

Where is sawfest held at and what do you charge for port and machine work? If you’re even accepting work at the moment

[@Piston1196]

Where do you get the bigger air filter for the cs-4910

[@jonathanhensley8685]

No squish band or piston work on the 550?

[@dynojoemods2764]

No piston work, I just picked it up, but I believe it has a band cut, and no base gasket. Just lowers opened up on the cylinder and muffler mod. So far nothing on the ports or piston

[@harryharry3193]

Hey Joe....Looks like your dropping weight? thats great. Health is most important. Love if you make a vid---talking about 2 stroke oil and what ratio you use and why. i Love my 545....and cant beat them for 400 on facebook.........however---plastic caged bearings are the weak point.......thus question on oil...

[@georgecolee7663]

Any muffler upgrades for the Echo 490/501 to compliment that trick air filter? Is that a Uni air filter or K&N? Awesome kit thank you for testing it. Is that Total bar the lightest one out there for that unique Echo bar mount? Maybe drop a link for those as well? Thx

[@BM-wi9kt]

How did sawfest go. And the 366 clones?

[@dynojoemods2764]

Sawfest is in October. Still have a bit of time to finish up some builds. I hope....

[@marklutwyche8578]

Hi joe, I managed 8hp from my 58cc zanoah saw, did loads including a turbo crank std timing numbers but long blow down, you may be interested in my short expansion pipe, it went from 6hp to 8hp with the pipe, love your video's you may like my stuff, from the UK lutys chainsaw mods.

[@larryw5429]

Its almost shameful how bad chainsaw mufflers smog engines down! First thing to do with saw is muffler mod or pipe!

[@trvr_inds]

Yup. All engines these days are madly restricted performance wise SOLEY due to epa/regs Sad Gotta let em breathe