PINCHING THE FRAME RAILS TO FIT 1935 FORD SEDAN BODY

Today we're going to pinch the frame rails on the 1935 Hupmobile chassis to fit the chopped 1935 Ford sedan body 🔥
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoc...
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #gasser #chassis #frontendsuspsion #flathead #1935hupmobile #mechanics #flatheadengine #hupmobile #classiccars #vintageracecars #1935ford #sixcylinder #1936ford #engines #hotrods

[@philstone6564]

Good job both of you.👍 Just one comment, I would like to see at least one of these projects finished.

[@robertdehaes9329]

Just listening to Chads thought process is an educational boost. He weighs options, selects the best one and goes till something does or doesn't change it.

[@gettingoldsuckss]

Lmao.. educational huh. It's humorous to me. Lot of dumb ideas and going about things the wrong way is what I see and hear

[@stephenmelton7706]

I have no interest in building, or working on cars, but I love Chad's creativity and work ethic. That's why I watch.

[@i8ntnuts]

Absolutely. He put his heart and soul into it

[@garygallagher7557]

Chad, you still need to cut the short channel between the passenger rail and the passenger x rail. The passenger rail will not move until it is free. Look at the small triangle the three elements make up. In geometry a triangle is the strongest structure.

[@MrGunPilot]

I'm thinking the same thing. Did he perhaps cut it off camera? Nope, I see he didn't.

[@i8ntnuts]

That was one hell of a nice frame huh

[@robertshaffner707]

Yes that little piece right above the end of the muffler needs to be cut! Then it would be completely free to put whatever he wants with no clamps!

[@austinmarcsisak8708]

Would of made it so much easier

[@saltycreole2673]

Not that I know anything but one side has that short beam and the other one doesn't. The one that moves doesn't. Right?

[@lapsteeler85]

The creativity in the projects keeps me coming back for more, out of the ordinary builds are refreshing ! Cheers from Ontario!

[@williamgroel2880]

It’s fun watching you figure out what to do.There’s always a way to do the job. Thank you for sharing your knowledge.

[@oldscoolcooldiecast1879]

I like how he just does him and actually finishes his cars can’t wait to see the finished product

[@kenbaggett1787]

Love to watch you work, you have more energy at 50 than I had at 10!

[@raymondthornton7611]

It is amazing to work outside all summer. You are an inspiration when it comes to not being afraid to make things happen.

[@frankrodriguez1977]

Absolutely ingenious. Love to see Chad fix the issues where most people would throw up their hands and give up.

[@jimberry1227]

Jolene thanks for letting us hang out with Chad & seeing him for real.

[@marcbaker2502]

Always great to see what Chad works on and which job he tackles each day when a new video is uploaded. ... Watching from Melbourne, Australia

[@ole57hotrod]

At 64 i learn something every time i watch the 2 of you working together. thank you both for sharing...

[@jimcoplan9502]

More amazing modifications to the Hupmobile chassis. Chad is getting this done fast and Jolene is doing her share of the welding and terrific video work. Keep on keeping on!

[@peterarndt3068]

Thanks again for your hard work and for taking the time to share with us. God bless

[@larrybailey43]

That brace by muffler not allowing frame to bend on the right side !

[@ralphtetlow8745]

That’s right, the sister to it on the dvr side by trans. The rails can’t move squarely. Should cut both lose before pinching the rails.

[@billhoward7730]

It is really amazing to watch Chad and Jolene work together. Together they figure out what to do and do it with success working on the fly. GREAT JOB!!!!!!!!. Bill

[@Roopull]

Good stuff! Inspiring! I wish I had a "Jolene" to record my progress on my projects. To film as I work is exhausting & breaks my rhythm. You're lucky, Chad!

[@oxyfee6486]

Could you imagine being chads baby sitter when he was younger,she’s probably still in therapy,lol🤣 love the show guys.

[@kevinbrown1549]

I can't believe how clean and rust free that hup frame is...wow.

[@alanpaulick7815]

Nothing better than watching Bad Chad going on a mission. Thanks to Jolene for sharing this video 🙌

[@Jmartestuesday]

Man-oh-man -- This is a perfect example of that old "saying" Doers dont plan and Planners dont do !! I was actually squriming in my seat while watching the squeezing and cutting. I "knew" the "triangled frame rails MUST be cut somewhere, but also realized Chad would *Get it done*. Still I was concerned about blade getting bound while cutting with the frame trying to compress. Chad is my "hero". he gets things DONE, and done well.

[@dwellyryder3553]

I did the same kind of work for 50 years plus The Secret Never be afraid to try something You are a character in the most respectful sense

[@jeffreycrossin427]

You have a great group of friends. It's the quality of your friends but the quantity that matters.

[@johnstewart9396]

Stuff that front end under there! Best entertainment on KZbin Keep up the good work!

[@baldanddangerous1572]

loving the fab work its looking great

[@hitnmiss49]

Thank you Chad and Jolene for these educational videos.

[@1944chevytruck]

AWESOME JOB!...U R A TRUE WORKAHOLIC!... thanks 4 video. be kind.

[@jamesclark1131]

Great work Chad, car coming along nicely, love watching the process

[@kevinbrown1549]

Chad & Jolene you both are an inspiration to the custom rodding industry...thank you for your teachings and entertainment.

[@aabartu3]

Happiness and positivity are definitely contagious!

[@antoniocovarrubias7831]

You got a bracket makin pressure on the passenger side that’s why you are not moving the chassi in to the 45” width that you need.

[@timmaccowan]

very kool. Nice seeing different things. Makes me think of what I need to do to my 1929 truck. thanks keep the videos coming.

[@allanlazarus2694]

If you cut the cross member above the exhaust box it would move freely without vandalising the frame

[@matthewfocke5360]

Jolene's smile launches a thousand smiles. Your Helen of Troy. Chad, you are a card taunting your viewers with descriptions of your special lady. We admire your pictorial descriptions. I say this in all that is wholesome and respectful. We, men, do admire women for their beauty whether it be in mind, body, or soul. Your truck is the lady that sings last. Oh yea. What a gal!

[@i8ntnuts]

So much respect for people that try hard and work hard.

[@joebourque4860]

You work fast chad. You can see it before it's finished. Thanks you for all the information. Thanks for the video Jolene 👍👍👍

[@clifc6351]

Love the build. Thank You for sharing the day with us. Thank You for expressing YOUR Artistic FREEDOM. Thank You Jolene for your excellent production work. Beautiful place to work your craft.

[@jordanbest3926]

I love the no nonsense approach you use in everything you do. What you do in one hour takes others days to accomplish

[@britman101]

I am with you Stephen. I enjoy working on cars but have not desire to do a built. That being said I flat love Chad's creativity and his ability to think way outside the box. I have learned a lot and am still learning. He and Jolene are a great team and are a great asset to the auto community. Best workshop videos I have seen anywhere. Way to go. Keep it up.

[@roymazac2532]

Getting it ready for the body. Then we can see it come together. Always thanks for the video.

[@leosimon9463]

Great job getting the frame narrowed. Thanks for sharing your time with us.😁

[@virtuestreams2616]

So many projects and just one Chad-amazing!

[@joelaurieri9065]

Really like the thought process for pinching the frame. Looking fwd to seeing the body on the frame.

[@franka2507]

Like it when a plan comes together,

[@allanimalstaxi]

I never know where you are when working on a your project, I just it's always going to work out. Great video and great job Jolene, as usual.

[@goranabrahamsson3468]

Chassi is coming along nicely

[@mconfluence]

Another great build video! You to are Rockstar's!

[@Duckduckgoose805]

Chad breaks things down so well. Very easy to understand.

[@qwertyhenry1]

Wow what a creative mind ,the way you see things and get them done ✔ 👏

[@johnnygarrett6055]

Ready to see the frame done and the car sitting on it going to be cool

[@fillie37d.71]

Must be nice to be working outdoors with a beautiful back drop like that. Looks stunning. 🇨🇦

[@brew1456]

Thank you for your videos ,they are helping me more than you know......You 2 are awsome

[@DefaultName-vh3lo]

You have to remove the bar behind the muffler... another triangle!

[@ronlynch7744]

Cuts & bends it his way with Jolene capturing it all people. 😎👍🇨🇦

[@Op1zilla]

Even back in the day they put holes in the car to make it lighter, I like it, ggz

[@bennys.8814]

Another great video thanks guys for your time

[@mikeboutang4539]

You do some pretty amazing work with metal fabrication and body work. The race car is cool. Your thought process in building your projects is second to none. Great content.

[@DT99race]

Why didn't you cut the bracket near the end of the muffler? That was holding the X member beam in place.

[@DS-Turbo]

This channel is so awesome. We get to see every step of building a custom hot rod. Great work on what you do. This is better than any TV show out there

[@jimwhittemore1610]

Howdy, never know what to expect from one day to the next. I like it like that, thanks

[@cathyandgreg4239]

Really enjoyed seeing how you pinched the frame, there is always a solution!

[@tomfortson2684]

It will be interesting to see how this race car tracks. Will it drive straight???

[@kevinhall3443]

Really liking where the race car is headed. The flathead makes me smile!

[@norust1966]

Love it when Jim shares his ideas.

[@ScatterLee]

great show, all work, no drama, thanks

[@raywall5712]

I like the caps you made for the front end. I think it will look great.

[@lindenjohnson1515]

While I love Chad and Jolene so much, i must admit that I losing my passion for the show as the main projects are not getting completed. sorry

[@cannabisticannabisticino2718]

Run faster than your shoes, 😁 too much fun. Great job guys, you are the best. 👍 Greetings from Switzerland

[@PoplarvilleMan]

The brace above the muffler is holding that side, don't cut the. . . .Oh well.

[@jarobuilds]

I would be there for days measuring and planning and measuring some more and pondering. Chad just sees it in his head and goes for it. No time wasted!

[@glenrosendahl3964]

What about the two started projects in garage? Jolenes Bugatti and the Big one?

[@RoadratEddie]

He's probably trying to take advantage of the weather before it turns

[@johnapplegate1472]

Just a thought. ....the strap over the back end of the muffler is creating some of the resistance to the lateral pull with your strap.

[@peterderaaf3624]

Comeon. Chad throw a Hildebrand quickchange rear end in the look trick.😊😊😊😊👍👍👍👍👍👍

[@supranuts3598]

Anytime you cut a frame rail or crossmember you should be doing so at a 45. This allows you to spread the heat out as the weld will weaken the metal. This also stops a stress riser from happening. This will cause cracks. I used to an engineer and a jerr-dan and we cut frames every day. Also you’d usually use a insert plate or backing plate also cut at a 45 and overlapping gap by 6inches. Again sprays that load out so you don’t fail. Just a suggestion when cutting frames. Truck or car.

[@fredhoman6101]

Great video again,it's coming together for shure,great work of both of you,thanks for sharing

[@Mr51Fargo]

Its comin along nicely Chad can't wait to see the body on it . Keep up the great work...

[@nigelpearson7617]

Race car looking fantastic keep up the good work Chad & Jolene

[@marksheyworth7888]

Can't wait to see these run

[@DroTrebor]

The confidence you have in cutting the frame…inspiring!

[@michaelbristol6467]

Good deal, Bad Chad & Jolene @ Hiltz Auto where dreams come true. 😉👍

[@frankesparza9516]

I believe it does someone else's smile can make someone's a great day

[@benjiehoffard9323]

I love listening to your thought process

[@bigc4263]

Yes he is Good at what he does & to share that not no 1 person is perfect he has a KZbin channel not me !!

[@timdobbs9069]

excited to see the chassis driving around I know Chad will do it.

[@DavidBrown-mn3iy]

It's cool to start with a chassis that has already been lightened with lots of round holes.

[@elvisshotrods6094]

I leave work to come home and watch you work !

[@dennisbarnett1995]

Hi Jolene and Chad. Here to watch another great fabrication show on the race car build. Thank you, Dennis here from Filer Idaho USA

[@cavinkachel498]

Chad does such a great job not to mention Jolene! Keep up the good work!

[@williampalmer4676]

Chad, the brace over the muffler is creating your issue, not allowing the frame to pinch.

[@calvinwaits7835]

Really love your work and ideas… keep it up

[@terrygrant4014]

Good work Chad plain and simple And all in an hour 👍

[@southernacho]

You can see on the go, what's going on inside Chad's brain. Highly confident and I can do aptitude. Love it!!!! 😎👌

[@mrfatbobrider1969]

Shout out to Chad n Jolene from New Zealand..love the channel guys real builds in real time shows exactly how long builds take ..better than time lapse videos..just " MASSIVE ".

[@moyadapne968]

No flying down to Wanaka for you! Cheers. ChCh. Love Chad's channel too.

[@mrfatbobrider1969]

@@moyadapne968 yeah pretty straight up kind of fella.

[@elvisshotrods6094]

Home from work after working on cars all day to watch you do it 👍

[@joeyb.9858]

Happy day Hiltz motor company.. racecar is looking better day by day keep up the great work..

[@callmenortnortin467]

Enjoying watching you create things . Ratcheting load binders are your friend ;) just saying :)

[@plank407]

This race car is awesome! Can’t wait!

[@jamesgoucher862]

Interesting listening to Chad talk his way through the project. I only do what my Brain tells me too. God bless.

[@gilbertgarcia4040]

Looking good Chad. great work

[@Hugister]

Very interesting modification of the frame. Good job!