Customer Drove 8 Hours...for THIS?? (GM Truck Poor Shifting)

[@alex1949]

Aftermarket parts, spaghetti wiring loom, and many shops who worked on it, but did not find the problem. Thinking it's going to be a doozy of a diag. Ends up being fluid level. Goes to show, you have to have a sound troubleshooting strategy and start at the basics. That there is a huge lesson in itself.

[@snoopy81]

He is sure cranking head how to charge this customer founding less oil issues finally.😆

[@dominicm2175]

I think every subscriber here would not hesitate to drive 8 hours for your diagnostic mastery

[@thearch1tect249]

All those mechanics and they totally dropped the ball. And people wonder why we are willing to drive hours on end to see guys like you and even Eric. O. We'ed rather pay you even if a little extra because we know it's going to get done right and once. Great work as always.

[@Walczyk]

It’s amazing how there are still people in the comments saying it’s easier than ever to find a good mechanic because everyone going into the industry now loves cars… total nonsense

[@thearch1tect249]

@@Walczyk I work in industrial maintenance and 1 thing I learned in 20 years about techs and I'm sure this rule is across the board in all trades. 10% of the people do 90% of the work properly..

[@PineHollowAutoDiagnostics]

@@thearch1tect249 That sounds about right haha

[@seanlevoy9446]

@@thearch1tect249 Prieto principle.

[@skysurferuk]

"even Eric O"? 🤣

[@somerandomguy3868]

Just your willingness to take on this nightmare souffle of issues is amazing

[@Datsun280zeeee]

If I were the tech to open the hood and see that wiring I would not work on it haha

[@PineHollowAutoDiagnostics]

I was expecting a lot of electrical ghosts once I saw that spaghetti loom 😬

[@paulsullivan6392]

There is an additional lesson here which has not yet been mentioned. Read the owners manual. This customer drove a long way to learn he was using an incorrect method to check the transmission fluid level. - Oh and that unwrapped wiring loom....YIKES!

[@Walczyk]

Yeah I feel so lucky I learned this stuff at a young age when I couldn’t afford to not get it right

[@rjm7168]

Or just read the dipstick which says same thing

[@colbster1970]

Yep. One thing I learned in the army....R.T.F.M.

[@DallasACdotcom]

When I did a plug drain transmission change on my 2003 Tundra the manual specified to add 2 quarts for this procedure. I measure the drained fluid in a large graduated container that I bought for $2 from the dollar store. The drained fluid measured 3.8 quart. I added 3.5 and ended up adding a full 4 quarts. So the manual was a misprint. Always measure what you remove.

[@dustcommander100]

Unfortunately, when a computer is involved, the simple things are often overlooked. It's because there is so much that is unknown about what's going on in the computer. It's not just in cars and trucks, either - this sort of thing is pretty widespread in the industrial world. After a certain level of complexity is reached, it becomes almost imperative that the system be self-diagnosing - but in some cases, we still need to check power supplies and fluid levels. Easy to overlook the simple when the overall system is so complex. You did good, Ivan!

[@jix177]

Very good point.

[@Garth2011]

We can blame the transmission shop for the low fluid level since the owner didn't know the correct process in using the dip stick and was confirming "fluid level is within normal" ever since the trans swap. They delivered the truck to him with 2 quarts short of normal level ! Probably a good time to drop the pan and replace the filter and refill with a full load of the same fluid anyway. Might be a good idea to get some of that plastic loom material and at least get those wires encased from the elements and critters.

[@additudeobx]

I disagree. If you are gonna check the fluid level, understand how the fluid level is correctly checked and do it accordingly. Just because the owner says, "Oh, I didn't know how to do it and I didn't do it right", does not make it someone else's fault after that moment the owner checked it, it makes it the owners' fault for not checking it right and correctly. The "Blame" stops there.

[@Garth2011]

@@additudeobx No, the transmission shop gave him his truck with a 2 quart low fluid level. Truck owner isn't responsible for that. Had they done so, there would have been no problems.

[@russellhltn1396]

@@Garth2011 Agree, unless there's a leak, they gave it to him wrong.

[@inothome]

Lets not forget this was the original complaint with the first trans, that turned out to be the brake switch. Then more problems. You can't always trust the customers story either.

[@pakjohn48]

@@additudeobx Correct. Such a simple check which should be part of an owner's inspection routine, was done incorrectly. From that point on he must share the blame. It doesn't let the shop off though - they are well paid experts.

[@dongningprc]

Good lesson! I am a programmer, when I find some bugs in the lines I wrote, USUALLY, I mean 9 out of 10 times, it's going to be some really really basic stuff that went terribly wrong, and I'll never ever even think something could go wrong there

[@_RiseAgainst]

I'd rather watch Ivan fix cars than adult films. The results are the same.

[@TheFrenchPug]

Satisfaction? Lol

[@callumcurtis15]

Definitely better for me, Sometimes I feel dirty after watching some of them 😉

[@AZBEEMR]

I watch both, one is for education, the other for entertainment. I can’t explain how much I am entertained by wiring diagrams,no parts required fixes and wave formations!

[@InsideOfMyOwnMind]

Shooting the parts cannon?

[@TheFrenchPug]

@@InsideOfMyOwnMind hahahaha!

[@robbertzyk6626]

I have a 2004 Silverado 2500hd and I can tell the difference even when it’s a quart low. Transmissions are definitely happier when there full.

[@billneu9520]

To repair unwrapped wiring loom first layer of tape sticky side out so the next person can open the harness without all the glue on the wires.; You are the best instructor on the internet. Keep up the excellent work If I ever have a problem that I cannot fix I will drive from LI NY to you. DIY since 1962 only because had no funds to have someone else fix it had to learn the hard way break stuff than fix it. Bill N LI NY

[@nevillegoddard4966]

Hi Bill! First layer of tape sticky side out ay? Mate that's a genius of a simple idea! I'll use that one cheers bud!

[@wyattoneable]

My goodness. Nice work on your part but that's got to be frustrating for the owner.

[@calholli]

I always drive manuals-- but when other people have auto-trans issues: I go straight to the fluid level first thing, because I've seen that be the problem more than anything else.

[@lynndeman3517]

Zomg I love it when seemingly complicated problems are solved with simple solutions.....2 qts low....nice :)

[@stevenbelue5496]

I've worked on cars all my life and I am so jealous of Ivans knowledge. The mechanical side is so easy but the electronics is a different animal. I wish I could have went to school for this or spend some time picking Ivans brain. These videos are great and give me a better understanding of the processes, Would love to get past the guesswork or throwing parts at it. Not many guys out there with this level expertise, I can count the ones I know on one hand.

[@PineHollowAutoDiagnostics]

It's all about the scientific logical process 👌

[@stevenbelue5496]

@@PineHollowAutoDiagnostics I've only watched a couple videos but it's awesome seeing the technology you have at your disposal and showing us how to use it. I've never had any significant diagnostic equipment, it really opens my eyes to see how figuring things out the old school way is so primitive. The LT engine with the #6 misfire was a great video, those pressure wave test are awesome the way it graphs all the cylinder pressure in crankshaft degrees and being able to compare a known live cylinder you can see exactly what's going on. It's just awesome and really opens my eyes to what I've been missing. I've definitely got to get my hands on some of this equipment. That little bump in pressure, you mentioned cylinder pressure was at -12lbs, I wonder how much vacuum it would take to pull the valve off it's seat? And what type of equipment was used to perform these pressure wave tests? Just very cool!

[@PineHollowAutoDiagnostics]

@@stevenbelue5496 it's a very exciting field where you learn new things every single day 😁

[@stevenbelue5496]

@@PineHollowAutoDiagnostics if you ever do that pressure wave test again I would love to see the equipment used, I'm doubting it's done on the same snap on scanner you use? Could be I just know, maybe there's a pressure port that connects to the plug hole? Interested in this

[@PineHollowAutoDiagnostics]

@@stevenbelue5496 just watch the vids in my "Pressure Transducer" Playlist 👍

[@robpeabo509]

Like most diagnostics, start at the start! If it is an electrical problem check for power then grounds. If it is a shifting problem in an automatic gearbox check the level, likewise with power steering. If it is a starting problem, look for fuel first before the other stuff. Most of the basic checks are just that, basic checks. People should have to do a basic vehicle check test before getting their licences. In Russia you used to have to pass such a test to get your drivers licence. I don't know if it is still a requirement. I assumed it was because you could freeze to death if you were stuck somewhere in winter. PS I have never been to Russia.

[@BleuCollarFndryMTL]

I bought a ThinkCar. So I need to watch all of videos. You're great guy.

[@craiggoodwin9704]

Ivan, you really looked at a lot of things and adjusted one thing (transmission fluid level). I hope the owner had you put the wire harness back together. In the end I'm sure the owner found your work well worth the drive. Thanks for Sharing! P.S. I should probably check the tranny fluid level in my old truck sometime soon!

[@markcollins457]

They thing that I have gotten out of your process is each time I watch you have honed my skills on "Where to start". That is the big issue thank you!

[@mkilptrick]

Checking an automatic transmission while engine is running. Learned something new. Thanks Ivan.

[@bobbydelamar606]

I would be embarrassed. But there's lessons learned in everything.

[@aranhaydar9195]

Nice one ivan :) always the code description scares me quite a bit but your steps and mindset are really easy to follow and effective.

[@sergei41]

Im surprised how clean that fluid was! 👍

[@mikefoehr235]

Most automatics to check fluid...level surface, engine running AND up to normal operating temperature. It even says on the diptick all of these conditions. Sadly, like my new Tundra and many others, there no longer is a tranny dipstick.

[@seapeddler]

Car makers should use a clear wire loom. One just has to wipe dust and see a rare smoked wire, etc. Clear rad hoses as well. Then you know all's full . WIndscreens are clear for good reasons too.

[@larrystephens7437]

Even with 2 qts of fluid I still give this one a NPR. Well done troubleshooting...

[@atticstattic]

RTFM

[@speedy_pit_stop]

Yes and this goes to my LSA

[@fieldsofomagh]

Hard to believe the solution but nonetheless well worth the 8 hour drive for a severe 5 year long headache. Would've done the same myself and bought Ivan an extra couple of beers for his thorough diagnostic skills.

[@gmansecond4103]

With how bad that engine bay looked, a lot of people would have had to miss low transmission fluid when trying to diagnose it. Sounds a bit strange.

[@ChrisWilliams-pu8pj]

Ivan, I truly enjoy watching your videos and your approach to people. Too bad you can't branch yourself out to other areas as a person of your apparent integrity is becoming more difficult to find! Keep up the great work.

[@PineHollowAutoDiagnostics]

Thanks Chris 👍

[@gjurczyc]

Absolutely it is a GM, Trans has to be full. It could need a trans service new filter and fluid. Gr8 find as always.

[@robertmedina6875]

I always had good luck substitute a quart of Lucas transmission fix added hot and then drive

[@AP9311]

Ivan I've seen so many customers complaints with poor shifting. They all say they check fluids with engine off, very common mistake. Always check it when engine is running. I've always put a quart or two in to cure the problem! I always remind them to check it when engine running in GM trucks. That throttle body is notoriously common problem to fail if it doesn't have ac Delco part. I've always replaced Dorman crapoy part lol. Great job to do simple checks etc

[@mattcat231]

I've been running into Delco throttle bodies that have issues out the box lately, had 2 in a row that would not relearn and gave the A/B correlation codes on 2 different trucks, took them back and the dealer was dumbfounded, but after a chat with them, i guess their service department got a couple bad ones too. This was on my own 04 2500HD 6.0, (old style TB) and an 06 1500 5.3, (old style TB)

[@PineHollowAutoDiagnostics]

@@mattcat231 parts quality is going down the drain lol

[@stealthg35infiniti94]

My brother inlaws subie Outback was making lots of noise. I told him let's check the oil level. The tip of the dipstick would barely get wet. We added nearly 3 quarts of oil to the full line. The car ran much better. This car is 22 years old and over 420 kilometers. He never checked the old before because the service shop does every time they change the oil. Now he will check it weekly.

[@billbarney4937]

it must be hard to find a competant mechanic. myself i have always repaired my own vehicles since i was 18. after getting ripped off on car repairs a couple times before i decided to do repairs myself. you will make mistakes but thats how you learn. mechanics today need to know electronics and electrical troubleshooting

[@neilmurphy845]

My guess is the throttle body is an aftermarket one and so is the sensor and that's why it's not happy with it because It doesn't look factory

[@williamkelley7654]

THere are times I would travel 8hrs even to get news like this since at least you could trust the mechanic. I wish I had a mechanic I could trust, worse yet I am a medically retired mechanic so I trust no one. At least this customer knows there is nothing else wrong, that does give piece of mind.

[@Anonymous-it5jw]

We're all very glad you know how to interpret the waterfall of information your scanners and PICOs deliver to you, and that you can actually use that info to make vehicles work properly again. And many of us think we are following you while you're doing it, but it's like a dream at the break of day - our understanding of this esoterica, until it is as comprehensive as yours (i.e. never), seems to fade away just a few minutes after your videos are over. So we continue to watch new videos and be amazed, hoping that one day we will understand it all as well as you do. Thanks for sharing your knowledge. Use your graduate degrees from Penn State to write an app that consolidates and evaluates all available scanner data and then produces the exact answers DIYers need to pinpoint car problems - just an idea, but you have the knowledge, skill and organizational ability to do the job, your wonderful wife appears to tolerate your work habits, and you seem to need no sleep, so no obstacles to producing the perfect app.

[@stevenbelue5496]

Just found and subscribed to this channel, I am seriously impressed with his knowledge. I've only worked with a handful of guys that were at this level, it's rare. There's mechanics and then there's auto technicians, mechanics are a dime a dozen, techs like this is rare. I know I'm a good mechanic but I can only wish I had his tech experience.

[@lvsqcsl]

You mean to tell me all you did was put some transmission fluid in the transmission? Aren't there new trucks/vehicle that don't have a transmission dipstick? After I get the oil changed and start the engine I go around to the passenger side and pull the transmission dipstick. I didn't know about checking with the engine off on Honda cars! Great video!

[@mike_svt93]

A case of back to basics and not beyond the basics. Valuable lesson learned. Trust, but verify.

[@calholli]

Hard lesson for a 16 hour drive, round trip. lol yikes

[@robmut1357]

As we say in tech support: RTFM! (Read the fine manual) 🙂

[@chrisland169]

So what you said is nobody in Michigan state was able to repair this truck?

[@nevillegoddard4966]

Hi Chris! Yeah it's a pretty piss poor indictnent of most repairers huh? Get it donw quick as possible to maximuse income. Customer comes last.

[@Fljeff7]

Used to give instructions on the dipstick. They don't put dipsticks in many new ones these days

[@Ram14250]

If I were the owner, I'd change the engine oil. On your test drive, that oil pressure was pretty low. Around 20psi (IP Gauge) at moderate 3000rpm acceleration... should be near 40psi or higher.

[@Walczyk]

Really doubt the oil quality is the issue. He should use a bore scope and check out the oil pick up

[@LJJKD1947]

That caught my eye too, seemed kinda low.Even at nearly 200k the engine shouldn't have been that spanked.GOODJOB! Ivan.

[@callumcurtis15]

Potentially go up an oil weight if it's not already at the max for this engine .

[@JRS-iq9pz]

Just some simple thing not checked while running. Amazing. Good job.

[@gillgetter3004]

My Chevy trucks have it written on trans dip stick “ check with engine running in park “ ?

[@fredwalker839]

The dope can’t read Engla !

[@bobspurloc]

I see you noted it at the end. those wires sitting like that is going to cause a problem. they are going to be chaffed and short out. but what do I know! ;) oh and dont forget to check the brake fluid for water content since that apparently is a rampant problem...

[@The528692]

Yes it could be a chew toy for a mouse

[@tylermartelle7041]

A Chevy from MI with 200k on it, well at least it can nicely drive itself to the scrap yard now! 😂👌

[@scottreed991]

Ivan, thanks for sharing your knowledge. You're a good human being. Peace .

[@Tommy_Mac]

I always check the dipsticks first. Smelly brown trans fluid is usually the first sign that there's a problem that needs to be addressed. The owner is that problem.

[@ericblackwell9863]

I know on my Allison trans. If the fluid is low at at it doesn’t shift like it should there very finicky

[@travissheehan6082]

Ivan’s really good at keeping that factory “screen protector” in good shape on the thinktool

[@PineHollowAutoDiagnostics]

I store the scanner in a ziploc bag in the back of my truck 😂

[@Walczyk]

There’s a transmission shop near me that routinely underfills newly installed transmissions and then refuse all liability when the transmission grenades itself

[@giggiddy]

They are going to do that slip shot shit to the wrong person and get something more than a returned car. Especially if they are doing it to save on tyranny fluid....

[@Walczyk]

@@giggiddy Honestly after the father retired it became a shady and shitty shop. I bet they don't check the level after filling, and also don't test drive it. It's really hard to find a good shop

[@williampierce5615]

I like how you don't want to hold that nasty steering wheel.

[@willefixit]

wow fluid level for the win

[@waltertaffs1737]

Michigan here great videos keep up the good work

[@atticstattic]

Sir, you seem to have more of an electrical 'blanket' than a harness, but on the plus side - all the wires are easily accessible

[@2491kridge]

I had a 2017 grand Cherokee in the shop the other day, only 40,000 miles, transmission absolutely screaming when accelerating, found it was 2 quarts low and that fixed it right up. It was dry as a bone underneath so no clue where the fluid went but it was an auction car so God only knows lol

[@weshawkins7165]

8 hour drive because of low trans fluid level. The owners manual usually will instruct how to check fluids. I think he just wanted to meet you in person. Now you need to fix the trans leak.

[@CUSTOMWORKS7.3PSD]

LOL my yukon started getting funky with the transmission took me about a 1/2 hour and the master was broke who would have thought,,, leave it to gm active brake management

[@kevin9c1]

That transmission needs Dexron VI. When this is over advise customer to do a full fluid service.

[@fredwalker839]

👍Kevin, & “never” hand operate fly by wire throttle plates by hand, especially on “big show” video !

[@Nudnik1]

I have a few of these GM trucks 5.3 and 6.0 vans trucks fleet . One has 350,000 miles no major issues. Minor probs with electrical . I do all my own service repairs. Often idiot hacker mechanics cause most issues. Low fluid or overfilled cause foaming harsh shifting.

[@volvo09]

Yeah those are good trucks. I'm not a GM guy and I'd own one and trust it if I had a big RV to tow. My experience with low trans fluid is harsh shifting, delayed or erratic shifts, and feelings of "dropping into neutral" and slipping or smacking back into gear. When you are low on fluid it really causes havoc with the trans. The clutches can't work with foamy airy fluid...

[@Nudnik1]

@@volvo09 240 Volvo best car ever made

[@volvo09]

@@Nudnik1 hell yeah. I had a few 240 wagons. I personally like the 7 and 9 series wagons the most (they are just awesomely square). I want to find another.

[@HouseCallAutoRepair]

Awesome lesson Ivan! (It's unfortunate that the owner felt the need to drive so far, for a fluid level caused issue)

[@mikechiodetti4482]

Wow. No one thought to check the trans fluid? One more thing. On the test drive, I noticed the oil pressure gauge was at the 20 mark. How much engine oil was in the crankcase? Hopefully, this truck will continue to run good now. Good one Ivan.

[@emmanuelgt5]

It did have the performance code for the oil press sensor, these sensors are , well, not the best and fail often. I had a brand new AC delco one leak out of the plug, oil running down the bell housing onto the hot header, almost caught a car on fire. That said these LS based engines do run 30-35 psi on idle when hot from my experience.

[@georgebell3964]

Ivan, you have the patience of a saint

[@danr1920]

I got beaten up with a wrong transmission dipstick. It was overfilled causing fluid to go where it shouldn't be, which caused slipping at shifts.

[@jws3925]

Ivan, Ivan, please learn to walk away from these turds. Look, we all appreciate your ability to essentially diagnose anything but you are trying to run a business. It was Kenny Rogers who first made a song "you got to know when to hold em, know when fold em, no when to walk away, no when to run....." That was good advice. Guys travel this far because it is almost impossible to find good and honest technicians in most areas of the country. I know some will dispute this but that has been my experience and, well, this guy found out the hard way. By the way, Eric O. won't work on out-of-town customers anymore. He is actually getting a bit ornery. I still watch his videos but you can tell he is not really "into" doing videos anymore and I don't think he ever really liked dealing with people. He is just kind of hooked on the KZbin money. I'd be that if he could, he'd go back to just being a relatively unknown small town mechanic.

[@GregoryGlessnerViolin]

23:55 the squirrel survived. The squirrel that ran in front of my 03 Avalon the other day wasn't so lucky.

[@PineHollowAutoDiagnostics]

Oh no... RIP squirrel 😥

[@Mr2004MCSS]

The only good squirrel is a dead one.

[@notyou6950]

8 hour joy ride. Now, 8 hour ride back. What a deal!

[@mechanicalsuntheoneyouknow]

I have seen 700 mL of CVT or conventional transmission fluid level low cause transmission and Drivability shifting Performance problems

[@ganeshnarayan5505]

Another great video Ivan on a Chevy Truck.

[@gangas06]

I think you fixed one of his issues but the transmission pressure switch code was not addressed.i bet that pressure switch is torn causing high line pressure when code is set.just my opinion

[@atikovi1]

Oil pressure at idle is fine but looks a bit low going through the gears. At 20:18 I see 3700 rpm and only about 30 psi. Have the same truck with more miles and it will have 40 psi over 3000 rpm.

[@mikefoehr235]

Maybe the sending unit is faulty.

[@billsimpson604]

Two quarts low in a transmission is like draining 2 pints of blood out of a human. You wouldn't work too well either. He was lucky it didn't burn up the clutches, or something. Those loose wires will wear through eventually. He needs to fix that for sure. People start driving half way across North America for your service, Ivan, and you may need to open Ivan's Motel.

[@markket1154]

That evaporate code could have indicated a vacuum leak to cause the engine run rough at idle with no misfire, should have hooked up the smoker.

[@windward2818]

Did adding transmission fluid eliminate the transmission pressure switch code? I think at some point the engine wiring harness(es) will have to be repaired.

[@johanneskoedood2235]

darn adds in the Netherlands are doing my head in with covid add i love your solutions hand on power grounds solutions and green crusties

[@scottreed991]

Love you my teaching friend. Peace.

[@thomasbailey8306]

That was a very Expensive 2 quarts of Transmission oil for sure. Driving 8 hours one way to get his truck fixed....wow...

[@Adam-bw4lw]

Soo 5 years and a dozen shops later no one thought about checking the oil the right way 🤔

[@fredwalker839]

I rest my case your honour! LOL

[@adotintheshark4848]

The little bird in the background is tweeting "what is that plate of spaghetti under the hood?"

[@robertgestier2013]

What's happening with the Caprice PPV in the background at 0:44 ?

[@PineHollowAutoDiagnostics]

Suspension rebuild due to a massive curb impact after a joy ride in the snow 🤣

[@JodyBC1]

people get so wrapped up in trying to figure out complicated causes that they get blinded by simple stuff.

[@aflotte7793]

Prof. Kelley, Weber St. Univ., addresses “misleading statements” by Castrol, Valvoline, etc. on their ATF containers (Do not meet OEM specs.) Interesting video and Wikipedia Article.by Prof. Kelley.

[@trippplefive]

23:53 that's the "i 'm about to crap my pants" look right there

[@PineHollowAutoDiagnostics]

😂

[@cristianpadilla8885]

20:20 I heard Eric O saying "uuugghhh chevy thunder"

[@seunim3228]

good morning from houston texas

[@glennfoster7288]

Expensive lesson to learn

[@calholli]

Hard lesson for a 16 hour drive, round trip. lol yikes. But at the same time, it's cheaper than needing another transmission.

[@carhacks3590]

Dear Ivan is there any suggestions from your side to those who are entering in the vehicle's diagnosis world like me !!

[@ronaldfulton1175]

Load test battery. Battery connections must be bright and tight. All fluid levels to spec. Engine oil pressure to spec. The devil is in the details...if you skip any of this, it will bite you.

[@jimkillen1065]

Thanks for the videos good learning experience

[@fredwalker839]

There’s a lot more going on with that 6.0L than low on trans. fluid ! When you scan a lot of them & don’t believe a customer when he’s that desperate! After scanning since OBD 1 came out , I know a “few” things other than Don’t Eat Yellow Snow ! LOL

[@richardnilsen8950]

Chris was taken to the Cleaners by his regular Mechanic. Unbelievable 😭😭😭😭😭

[@baxrok2.]

Wow. Thanks Ivan!

[@dudeman3986]

I'm not an expert but I'm amazed how much I know just from tinkering

[@PineHollowAutoDiagnostics]

That's how I learned on my 89 Mazda MPV 😅

[@fredflintstone4715]

Last time I had an auto, the dipstick was stamped(?) with something like 'check hot in park'. Is there nothing like that on them anymore?

[@jeffjankiewicz5100]

Looking at that wiring harness, RUH ROH, ZOINKS! We have a mystery machine. As for trans fluid check, I was taught to check it with engine running, AND that is stamped into the dipstick. Would 12% at idle be normal for a 2002 Dodge Neon Ivan? Also at WOT I do not see 100% in my Ancel AD 410 scanner. I am still fighting a P0172 rich code.

[@PineHollowAutoDiagnostics]

MAP engine... EGR valve?

[@jeffjankiewicz5100]

@@PineHollowAutoDiagnostics Map sensor replaced

[@MorphAndCats]

We call that a R.T.F.M error. (Read The Flipping Manual). Nice video thou.Thanks.

[@alananderson1914]

Are the check fluid level procedures no longer stamped on the dipstick? It is on my 96 Chevy K1500 anyway.

[@kc0lze]

Thats funny, "When it is humid". When a Michigander says it is humid, it is humid like cutting a cake.

[@titaniumman_22]

Hear the birds in the background with not a care in the world while the vehicle owner is considering his bill!

[@CORVAIRWILD]

Tow Haul trannys use different internals. Richard @ Precision Trans now called Richard & Theresa Educational. He showed the beefier drums