Pioneer DDJ XP1 & XDJ 1000 MK2 - Using Standalone With No PC

[@DJMatGE]

FINALLY! A DJ that uses the xp1 without performance mode... Thousands of videos about xdjs in HID mode and all that. Great video, i just tested xdj1000s at the club and i was really missing the hot cue buttons from the nxs2. Defenetly gonna get this one!

[@lustforlow-end6022]

There’s an xp2 out now!

[@ajpepe72]

Great video by the way 👍 just ordered the xp1 for my mk2 1000’s as it’s really decent money at the moment.

[@lafrancebeal2262]

I have an xp2 but it won’t pick up with Cdj 3000s

[@widdzzz]

Hey man, Love the video! Is there any functionality on this or the DDJ SP1 to call to memory points? Cheers

[@AzarathAkthar]

Still looking forward to the video of you using them with the nxs2s! Any results on that? And how do you use the pads for the CDJs on channel 1 and 4?

[@ashmcfcroberts]

The sampler should be for rolls

[@olliehodgkinson8297]

Looking at upgrading to an xdj1000mk2 setup, just wondering if they ever added further beat jump settings (32, 64) on the XP1/XP2, as that is the only fallpoint of upgrading my setup right now. Thanks!

[@g76312459777865m]

Thank you for making this video!

[@maolam]

Hello there, how are you? Do you know if your idea can be used on an xdj xz, with usb stick, standalone mode? Cheers🙂

[@romanromanko3485]

Great video, thanx. Do you know supported hardware with xp1? Is this only for 1000mk2 and nexus range?

[@FlipTheCatOfficial]

So that means you can do it standalone with the xp2 too?

[@thevinylpimpFloridaBreaks]

Cool video, I have the cdj 3000 and wasn't sure if this would be helpful or not, like the beat jump on the fly,

[@maarawoe]

This is mostly useless for 3000's given the most of the buttons are there on 3000's

[@thevinylpimpFloridaBreaks]

@@maarawoe Yea I like the idea of beat jumping without going into the screen but aside from that not much else would be an upgrade.

[@maarawoe]

@@thevinylpimpFloridaBreaks You even have dedicated beatjump buttons on 3000's so no more touchscreen...

[@Sanchit-v4b]

How have you connected 2 xdj .. is it via usb or just ethernet??

[@rndmdjuy]

i have 2 xdj1000mk2 and your video made me think of buying that, but I have a question and I can't find any information on the net, a third xdj? Can it be mapped on the 8 lower pads on one side?

[@Djtyla]

It supports up to 4 CDJ's or XDJ's. You can switch by pressing 'INT' and deck number button. Default setup would be decks 1/3 and 2/4 but this can be changed by pressing the USB button on the XDJ in case you want to change the order.

[@rndmdjuy]

@@Djtyla gracias

[@rndmdjuy]

The 8 hotcues can each be assigned in a different pads? thank you for the video

[@AIKO-iy2tx]

In Stand alone, it can be use for the sampler? Or just hot cue and beat jump? Thanks

[@la-shonarchibald1601]

Thank you.

[@maolam]

Ddj xp2 works in same manner? Cheers

[@AIKO-iy2tx]

in this way , you can't have 2 pendrives? if you get just only an usb input in the other deck? I'm interested to buy, but I don't know if I can use 2 pendrives in the same time.

[@chrisrioux6436]

You can only use one while using the xp1. The usb cable takes up one slot and you have to use a link cable to run music on both players because of this.

[@sambourgein2837]

Hiya pal! Thanks so much for the video. Been toying with a set of sc5000 Denons or a XDJ set up. Can I ask if you can use the XP1 or SP1 for acapella samples separelty and on top of two decks playing (in a 2 x XDJ set up?) .. really just want the option to layer samples over the top of 2 decks without buying a third XDJ. Hope that makes sense!

[@Djtyla]

Hi mate. Yeah this is possible only if you're running in HID mode with the XP1 plugged into Rekordbox. If you want to use something like that without a laptop the only solution would be to get something like the Pioneer DJS-1000 but it's very expensive.

[@sambourgein2837]

DJ TYLA awesome mate thanks for the reply... I thought as much. Just out of interested then. I’m on the fence between a pair of XDJ 1000, a Denon prime 4 and the Denon sc5000 set up. What you think?

[@Djtyla]

@@sambourgein2837 honestly since this video I've upgraded myself, so my opinion has changed. I'd say none of them. I've now got the XDJ-XZ which I highly recommend. You get essentially 2 CDJ 3000's (or whatever they'll call them when they finally release) and a full DJM900 NXS2 in the middle for a fraction of the price. So I would recommend that now.

[@sambourgein2837]

DJ TYLA absolutely pal. Did you evrn consider the prime 4? And if so what made you go for the XZ?

[@sambourgein2837]

DJ TYLA hiya TYLA! Mate I’ve been looking at that in depth. Any reason you opted for that over the RX2? Or even the Denon prime 4? I’ve not been into the rekordbox eco system so my purchase may define me for some time. What do you think buddy?

[@ruilin401]

Can such use？DDJ XP2

[@doctordissident]

Know this is old now, but would the SP1 basically do the same? Wan't all the features but in a smaller form factor if possible :)

[@rjmn1]

Sp1 works as well apparently

[@rjmn1]

kzbin.info/www/bejne/nZDGh4OLht2VbNUsi=hyIuzFPTNNHUVwjL

[@andreabarreca1316]

Hi, congratulations for your video, I wanted to ask you something about the DDj-XP1 and the XDJ-RX2 console, how can I connect the DDj-XP1, to the XDJ-RX2? I ask you this question because I have an XDJ-RX2, but I don't understand how to connect the DDj-XP1 controller to the XDJ-RX2 !! Could you please help me understand how to connect these two hardwers ?, Thank you in advance

[@Djtyla]

Sorry for the late reply, if not looked into whether they're compatible. But if they are, the USB will go from the XP1 into the USB ports on the top left of the RX2. (Where you'd usually put USB sticks)

[@andreabarreca1316]

Thank you so much 😉👍🏼

[@DiegoMarzegan]

It works with xdj 700?

[@JUCEDMUSIC]

Do the hot cues work for each track independently? I tried setting hot cues in my tracks on the XDJ 1000 MK2 but when I select one of the banks it jumps songs

[@Djtyla]

Yes, when you load in a new track it changes all the hot cues to the ones saved in that one track.

[@JUCEDMUSIC]

@@Djtyla thank you so much for getting back to me. I have been on the fringe about the XP2, you’re demo sold me. Have a good Holidays

[@Kevr0]

Do you know if the key shift feature works on the new CDJ 3000?

[@Kevr0]

Like playing a melody with a hot cue

[@sc_hdz]

Hi!! do you know how can I connect the SP1 with the xdj 700? standalone?

[@eduardoperla-fl6to]

Did it worked?

[@jasontaylor5237]

Update on this controller ? How does it work with other cdjs and how does it work with 4 xdj1000?

[@Djtyla]

At the moment it only works with The XDJ1000mk2 and 2000NXS2 unfortunately, I was wrong about the 900nxs. And yes it can be used with 4 xdjs/cdjs. To switch to decks 3/4 press 'SHIFT' and the 'INT' button on each side.

[@bunnysuperville]

Would it work the xdj 1000 mk1?

[@elhadjediallo867]

Is not that the DDJ XP2?

[@omgbarde]

Does this also work with the xdj 700?

[@eduardoperla-fl6to]

Does it?

[@spin-r6540]

Could you please let me know if the screen on the jog wheels heats up as a normal act as mine heats up. Thanks

[@JUCEDMUSIC]

I would have to say no, I have never noticed mine getting hot may be a smidge warm

[@4wrestlingfans]

Sorry but you have no idea how to use this equipment... why do you buy it ?

[@Djtyla]

What are you talking about? I've been djing 10 years. Bloody bedroom djs and their KZbin comments 😂