How To - Connect Smart Sync app with iPhone to Pioneer in-dash Receivers 2018

[@4Ever1727]

Thank you so much... this has been very confusing for me. I was even planning on returning this receiver tomorrow because I was so frustrated by this app... but now that I’ve watched your videos I’m going to keep it. I actually think it’s great now that you’ve explained it.

[@deckerdotto6035]

You can find a full playlist of How To videos from Pioneer about audio receivers with Smart Sync App here: kzbin.info/www/bejne/hGevl5akn96VpdE and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@bobbyd592]

Just installed mine got for Xmas into my 2000 gmc. I love it so far, works great!

[@deckerdotto6035]

You can find more videos with similar operation to Pioneer MVH-S310BT here: kzbin.info/www/bejne/kGfKYXiFhb9_ZsU You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@tannerjackson5442]

I have a pioneer Mvh-s310bt and it doesn’t connect automatically to my iPhone 8+ consistently? Sometimes it auto connects and sometimes it doesn’t. I am most of the time having to forget my radio in my phone Bluetooth settings and repair it any time I want to listen via Bluetooth? Any advice on how I can fix this???

[@deckerdotto6035]

With an inconsistent re-connect, please be sure your phone is not connected to another device like a headset or a portable speaker. This can block the in-dash receiver from connecting. I recommend to install the latest firmware for your Pioneer MVH-S310BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/MVH-S310BT#downloads After you install the latest firmware, I recommend to delete all phones from the in-dash receiver's Bluetooth Memory. Next, delete the in-dash receiver from the phone's Bluetooth memory and restart your phone. Start the phone pairing process from the beginning. You can see it here: kzbin.info/www/bejne/fJ6VhmR5oJakorc You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@6854155]

I got mine a few days ago, imessage not supported also the app a bit buggy. Update needed!

[@erictheboringone5292]

I want to know what’s the difference between the mode shown and the model I have the DEH-S31BT. They look identical except for illumination color and the function and button layout is identical yet mine isn’t compatible with my iPhone. I can control navigation and music source but nothing else.

[@deckerdotto6035]

Please be more specific with your question. When you say the Pioneer DEH-S31BT is not compatible with your iPhone, but you can control navigation and music source I don't understand what you mean.

[@jUQMtDmf]

I'm a bit confused. I have the MVH-S310BT (European version, red backlight) and the app just doesn't seem to recognize the connection I have with the radio. Now I checked the manual again and I was a bit shocked when I read the smaller text saying that the app is not compatible with Apple Products? Is this really (still) the case? This wasn't clear when buying. :(

[@pioneerelectronics]

The European version of MVH-S310BT seen here: www.pioneer-car.eu/de/en/products/mvh-s310bt/support does not support Apple products for the Pioneer Smart Sync App. You can connect your Apple phone through Bluetooth for hands free phone calls and wireless streaming audio with the receiver's Bluetooth Audio Source. For support please contact Pioneer Europe here: www.pioneer-car.eu/de/en/support

[@geovannijames]

Does the wired connection play cleaner/better than Bluetooth?

[@deckerdotto6035]

Depending upon what the music source is, it may be cleaner through a wired connection to USB. And when you have the phone plugged in, you have the added benefit of charging the phone. I recommend to adjust the volume control on the phone when playing back through Bluetooth. Start with the phone's volume control set at about 30-40% and see of you are getting better sound quality through the receiver at different volume levels on the receiver. If this is working better slowly increase the volume on the phone to about 50% and test a little more. If it's still good, go to about 60%, and then 70%. At some point on your phone / receiver combination, you'll reach a point of noise coming from the phone or overloading the receiver's input. Back the phone's volume down a few percent for best sound quality. You can find a full playlist of How To videos from Pioneer about audio receivers here: kzbin.info/www/bejne/mn7WfWBrqtyindk and you can find more videos on Pioneer's KZbin Channel here; kzbin.info

[@LadyChaos1992]

great video! I want to know how you have the receiver working outside of the car though!

[@pioneerelectronics]

This video and many others like it on Pioneer's KZbin Channel are created in a studio. I hope you find them useful. To use a 12 volt DC car stereo in an office, you'll need a 12V power supply. The 12v power supply takes electricity from the wall in a building and changes it into electricity usable by a car stereo. You can find more videos about Pioneer car stereo here: kzbin.info/www/bejne/amOofZKAfL2WgNU You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@garbinator09]

Is wire connect better quality for music or Bluetooth? I do not have the latest Bluetooth version on my older iPhone.

[@pioneerelectronics]

For an older iPhone I recommend to use the wired connection to listen to music through the in-dash receiver. This will also charge your phone when it's plugged in. Depending upon the model number of your in-dash receiver, you will need to press the SRC button to get to the iPhone/iPod source, when the phone is plugged in. You can also use the Bluetooth Audio Source if you want. For better sound quality you might consider playing music stored on a USB flash drive. You can play high quality audio files through USB. You can learn more about it in this video from Pioneer: kzbin.info/www/bejne/oXyxanWhmM16jLs If you want to use the Pioneer Smart Sync app, and USB at the same time, you'll need to use a Bluetooth connection to the receiver. You can learn how to pair your iPhone to the receiver in this How To video from Pioneer: kzbin.info/www/bejne/amOofZKAfL2WgNU You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@garbinator09]

@@pioneerelectronics You know this is top notch service response to me! Thank you 🙏🏼

[@ialien2077]

How do I add the latest firmware to the receiver?

[@deckerdotto6035]

These instructions are for users in the US and Canada. 1. Go to Pioneer's web site and download the update to a USB flash drive. 2. Insert the flash drive into the in-dash receiver. 3. Begin the update from the in-dash receiver. If there is a firmware update for your particular in-dash receiver you'll need to download it from Pioneer's web site. You can find it here: www.pioneerelectronics.com/PUSA/ Go to your in-dash receiver landing page. If available click on the downloads tab. Or scroll down to the bottom of your in-dash receiver page and find downloads. Download the update to a USB flash drive and follow the instructions included with the download. Check out this video for information on firmware updates: kzbin.info/www/bejne/kGfKYXiFhb9_ZsU If you find your in-dash receiver page and cannot find a downloads tab, no update is available. You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@biggdame21]

I just got the mvh sb221bs there is no firmware and the app hasn't open since the first day I installed it. am I doing something wrong I really want this to work as easy as this youtube video.

[@deckerdotto6035]

Please check the Pioneer model number. I don't recognize MVH-SB221BS. The receiver and the phone need to be connected through Bluetooth for the Pioneer Smart Sync app to work. Take a look at this video for help with connecting the phone and receiver with Bluetooth: kzbin.info/www/bejne/amOofZKAfL2WgNU I recommend to delete the Pioneer Smart Sync app from your phone, and then download and reinstall the app from the app store. Please be sure the in-dash receiver App Control Menu is set up to work with a Bluetooth connection. You can see it in this video: kzbin.info/www/bejne/noelaKSJebeBecU You can find a full playlist of How To videos from Pioneers about audio receivers here: kzbin.info/www/bejne/qqCVlouChaehgKs and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@vkendryozoz435]

Bruv that was all info i need right there. Appreciated man

[@deckerdotto6035]

You can find a full playlist of How To videos from Pioneer about 2020 audio receivers here: kzbin.info/www/bejne/mn7WfWBrqtyindk and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Bacardibombillo]

Is the face detachable for security?

[@deckerdotto6035]

Yes, nearly every Pioneer 1 DIN receiver has detachable face security. You can see it here: kzbin.info/www/bejne/kGa2kHyribmKjLM You can learn more about Pioneer receivers here: kzbin.info/www/bejne/mYnFp5ecnLGGaNE You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@bulbersator4350]

Just installed mine MVH-S310BT but I can't make it work with the Smart Sync APP on iPhone. It tries to connect but nothing happens. Installed latest firmware on both devices. Very disappointed. Also it is somehow different than the S310BT that is shown in the video: it has red backlight and no MIXTRAX logo and different button layout.

[@deckerdotto6035]

The video above is made for the North American market. The European version of the product is different that what is seen in the video. What iPhone do you have? What version of iOS is installed on the phone? Restart your phone. Are you attempting to make a wired or a Wireless connection to the in-dash receiver with the Smart Sync app? Did you choose that type of connection in the System Menu on the in-dash receiver? If you want a wireless connection, did you pair your phone to the in-dash receiver through Bluetooth before trying the Smart Sync app connection? You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@jbird68]

Is there only 2 option for clock display? Analog and stacked clock? I don't like the stacked clock. Can you just have horizontal clock?

[@deckerdotto6035]

As of 2020 February, I'm not aware of a way to change the clock display other than what you've described when using the Pioneer Smart Sync App. Please be sure to keep the latest version of the app on your phone. Future updates to the Pioneer Smart Sync App may allow different display options. You can find more videos about the Pioneer Smart Sync App here: kzbin.info/www/bejne/rpC9nZ2VmL53b6s and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@TheDjorder]

Can you tell the difference between the Pionner MVH-S310BT and the MVH-S410BT ?

[@deckerdotto6035]

The overall design is very similar, however, Pioneer MVH-S310BT is a North American design in-dash receiver. Pioneer MVH-S410BT is a European design model. Depending upon where you plan to use this product this may make a big difference to you. The AM/FM tuner operation is designed for local operation. Pandora is available in North American but not in Europe. You can find more videos with similar operation to Pioneer MVH-S310BT here: kzbin.info/www/bejne/npqngHambJqId6s and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@TheDjorder]

@@deckerdotto6035 I ́m live in Portugal, so the MVH-S410BT is the best choice.Thank You for your help.

[@franciscocornejo2089]

@Pioneer i am installing a big sound system in my 1987 c10 will be close to a show truck so which model is best for the sound system? Which one has better settings and better EQ’s ?

[@deckerdotto6035]

With your 1987 C10 will you be using a 1 DIN in-dash receiver? Or a custom installed 2 DIN receiver? If you are using a 1 DIN I recommend the Pioneer DEH-80PRS. For a high quality, show style, audio system the Pioneer DEH-80PRS is a great choice. You can see it here: kzbin.info/www/bejne/anrbZKhtap2jb8U You can see more about the DEH-80PRS Audio Settings here: kzbin.info/www/bejne/Zp-8Za1me7-Depo You can find more information here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-80PRS Another great choice is Pioneer DEH-X8800BHS seen here: kzbin.info/www/bejne/hX2qhZhmh9-Egc0 You can find more information about Pioneer DEH-X8800BHS here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-X8800BHS You can find more videos about Pioneer amplifiers here: kzbin.info/www/bejne/b2qrl6CZbbarjMU You can find more videos about Pioneer Speakers here: kzbin.info/www/bejne/aoenpKWHg7GFqbM You can find more videos about Pioneer Subwoofers here: kzbin.info/www/bejne/opOvp6mwq9t_qNE and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@ellierose3348]

i have the deh-s420bt and it says it has the app and i try connecting it the radio name sometimes comes it and when it does i try to connect it and it doesn’t work🤷🏼‍♀️

[@pioneerelectronics]

Please watch the videos listed below carefully and with the sound on. Your phone must be paired to the in-dash receiver through Bluetooth. Here is a video to help you pair your iPhone: kzbin.info/www/bejne/amOofZKAfL2WgNU and here is a video to help you pair your Android based phone: kzbin.info/www/bejne/rWSynXSQr7F_jpI Once your phone is paired to the receiver through Bluetooth, here is a video to help connect the Pioneer Smart Sync App: kzbin.info/www/bejne/bJSqlmuqpaiFqqc You can find a full playlist of How To videos about DEH-S4220BT here: kzbin.info/www/bejne/qqCVlouChaehgKs and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@cosmin27danut]

it's works on deh-x5900bt?

[@pioneerelectronics]

No. The Pioneer Smart Sync App does not work with the Pioneer DEH-X5900BT. A different option may be the Pioneer ARC app. As of 2021 May, the Pioneer ARC app works with iPhone 5 to iPhone X, and selected Android based phones. The Pioneer ARC App is compatible with selected Android phones operating the Android OS version 4.1 up to 7.1.2. The phone must also support AOA (Android Open Accessory) version 2.0. Ultimately the compatibility depends upon the individual smartphone. Please note, some Android based devices will connect via AOA 2.0 but may not work properly or emit sounds due to the phones software design regardless of the OS version. You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@cosmin27danut]

@@pioneerelectronics thx

[@Maga4Lyfe]

Everything seems to be working fine on mine other than i can’t hear people when I’m talking hands free through my vehicle speakers. Other apps are playing through the speakers but not voice calls. Help please

[@deckerdotto6035]

Pioneer in-dash receivers output Bluetooth Phone Call audio to the FRONT speaker outputs and FRONT RCA outputs only. Bluetooth Audio, or music played from your phone, will play through all outputs, both front and rear. Your in-dash receiver may be installed incorrectly. There is an easy way to test it. Using the Fader control, fade the audio output all the way to the front. You can see how to use the fader control in this video: kzbin.info/www/bejne/npqngHambJqId6s Can you hear music? Can you hear phone calls. If you fade the system all the way to the front and can not hear music, that means the FRONT audio outputs are not connected in your system. Need help with wiring your Pioneer System? This video explains the wire harness system: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI You can find a full playlist of How To videos about Pioneer kzbin.info/www/bejne/qqCVlouChaehgKs and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@Maga4Lyfe]

Deckerd Otto Thanks i just read that this morning and just got done switching to the front speakers. Thanks so much.

[@EthanknottDOJ]

I have the deh s31bt but when I try to Connect the radio will pop up but will not connect

[@pioneerelectronics]

Please be more specific with your question. I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer DEH-S31BT behind the detachable face. You can see it demonstrated in this Pioneer How To video: kzbin.info/www/bejne/pWfMkqqGZ5xsiJY The first step is to have your phone connected to the in-dash receiver through Bluetooth. Here is a How To video from Pioneer to help you connect your phone: kzbin.info/www/bejne/amOofZKAfL2WgNU Make sure you start up the Pioneer Smart Sync App on your phone. After your phone is connected to the receiver through Bluetooth, be sure to choose the receiver's App Control Setting is on Bluetooth. You can see it here: kzbin.info/www/bejne/aqnJXqWZbq54pc0 You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Foderboxen]

Will this work with android phones like oneplus 6 ?

[@deckerdotto6035]

The Pioneer Smart Sync App will work with many different Android based phones. Please check out this video for more information and connecting your Android based phone with the Pioneer Smart Sync app to the Pioneer in-dash receiver: kzbin.info/www/bejne/hGKqp2lrqrtjhq8 The Pioneer Smart Sync app will not operate properly will certain Android based phones because of the software design of the phone. You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@npb3871]

Does the app work with android

[@pioneerelectronics]

The Pioneer Smart Sync will work with many different android based phones with Android OS version 5 and newer. You can learn more about the Pioneer Smart Sync app with an Android phone in this Pioneer How To video: kzbin.info/www/bejne/bJSqlmuqpaiFqqc You can learn more about Pioneer Smart Sync version 4 in this Pioneer How To video: kzbin.info/www/bejne/hISoYqCGlNV4ptE You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@HooliganKONVERSE]

i have a DEH-6220BS and there aren't any firmware updates on the website, and the smart sync app keeps telling me that it lost connection with the in-vehicle device :( how can i connect?

[@deckerdotto6035]

What phone are you using? What version of the Pioneer Smart Sync app are you using?

[@Westcoasttrucker916]

Anybody have issues with the older pioneers not playing albums on the usb flip drives skipping songs not working please let me know thank you

[@kbonomo1]

Great informative video man really made it easy to set up.

[@deckerdotto6035]

You can find more videos about the Pioneer Smart Sync App here: kzbin.info/www/bejne/gJOkdGWIaayeoLM and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@TheDrakanMaster124]

Do I need the app to use Bluetooth

[@deckerdotto6035]

No. You don't need to use the Pioneer Smart Sync app at all if you don't want to. The app simply gives you a graphical user interface for the receiver. Here is a video showing how to pair your phone to the receiver for Bluetooth: kzbin.info/www/bejne/amOofZKAfL2WgNU You can play the music from any app on your phone through the receiver using the Bluetooth Audio Source. You can see it here: kzbin.info/www/bejne/oYGclHiwZ6idr6M You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@taylanlowe120]

I am having a problem. When I try to manually change stations on the radio the buttons cycle through my preset stations but will not allow me to go through all radio stations. Anyone know whats going on? Btw the buttons if held down will search .

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? Please be more specific with your question. Here is a How To video from Pioneer about using the AM/FM tuner in Pioneer receivers: kzbin.info/www/bejne/pHnWhYeCo6mXhdE You may to adjust the Preset Channel / Manual setting seen here: kzbin.info/www/bejne/pHnWhYeCo6mXhdE&t=425 You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@adamslosar2177]

Pandora issue.. I can’t seem a way to change/scroll stations? I am stuck in the one station

[@alexlevicar9377]

I have pioneer Deh-s510BT and sometimes it does not connect bluetooth automatically and then I have to forget device and connect again

[@deckerdotto6035]

Please be sure your phone is not connected to another device like a head set or a portable speaker. This can block the in-dash receiver from connecting. Please be sure to install the latest firmware for your Pioneer DEH-S510BT. You can find it here: www.pioneer-car.eu/eur/products/deh-s510bt/support Next I recommend to press the microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer DEH-S510BT behind the detachable face near the center of the receiver. I recommend to delete all phones from the in-dash receiver's Bluetooth memory and to delete the receiver from the phone's Bluetooth memory. Restart your phone. And begin the phone pairing process from the beginning. The receiver is capable of connecting to more than one phone at the same time. Please be sure your phone is the active phone connected to the receiver. You can see if in this video: kzbin.info/www/bejne/nmqroWWtYsaIfJY You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@alexlevicar9377]

Deckerd Otto when I try to connect it says “connection fail you have to forget device and pair it again” first week was all cool and working now it started this problem... I will try your recommendations thanks.... sorry for bad english I’m from Slovenia

[@mpa1931]

Great video, straight to the point.

[@pioneerelectronics]

You can find more videos on Pioneer's KZbin Channel here; kzbin.info

[@franciscogonzalez56]

It has a dinamic color? Can i Change it?

[@deckerdotto6035]

On compatible in-dash receivers, you can use the Pioneer Smart Sync app to change the color of the in-dash receiver using the Screen Settings. Or you can use the in-dash receiver without the app as shown in this video: kzbin.info/www/bejne/i2q1ZnSulJKhjKs You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@timstroes3722]

so this app doesn't work with a samsung? only with iphone

[@deckerdotto6035]

The Pioneer Smart Sync App works with Android based phones as well as iPhone. Here is a video showing you how to connect your Android Phone to the in-dash receiver using the Pioneer Smart Sync app: kzbin.info/www/bejne/hGKqp2lrqrtjhq8 You can find more videos about the Pioneer Smart Sync app here: kzbin.info/www/bejne/rpC9nZ2VmL53b6s and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@beebyemm820]

I must ask you a question, why I can’t use live simulation? Is a setting that I must to do? A hint something? I use iPhone X

[@deckerdotto6035]

Live Simulation works when playing back music that is stored on your connected phone. In the Pioneer Smart Sync App, choose the App Music Source. This will play back music that is stored on your phone. Now check the Sound FX setting. Live Simulation will be available. You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@RawrSandyx3]

I need ASAP the app keep saying connection with the in vehicle device lost Help please

[@deckerdotto6035]

Please be sure to update the Pioneer Smart Sync app to the latest version from the App Store. What model number of Pioneer in-dash receiver do you have? You can usually find the model number printed near one of the corners of the face of the in-dash receiver.

[@RawrSandyx3]

Deckerd Otto hi I have the DEH-S4120BT it is updated the app but it worked yesterday but I connected it with my USB than it worked is there anyway I can connect it with the app without the USB connected to the DEH-S4120BT thanks

[@deckerdotto6035]

I recommend to install the latest firmware for the Pioneer DEH-S4102BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S4120BT#downloads The latest firmware for the in-dash receiver will help with the Bluetooth Connection. You can find more videos similar in operation to Pioneer DEH-S4120BT here: kzbin.info/www/bejne/kGfKYXiFhb9_ZsU and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@taxiyoyo]

I bought this model in Europe but the iPhone is not supported by this application

[@deckerdotto6035]

The Pioneer Smart Sync app works with iPhone in Europe and in North America. iPhone 5 or newer with iOS 10.3 or newer is required for operation. iOS 13 is recommended for more modern iPhones. What is the model number of Pioneer in-dash receiver you have? You can usually find the model number near one of the corners of the face of the in-dash receiver. You can contact Pioneer support in Europe here: www.pioneer-car.eu/eur/support You can find more videos about Pioneer Smart Sync here: kzbin.info/www/bejne/rpC9nZ2VmL53b6s and you can find more videos on Pioneer's You Tube Channel here: www.pioneerelectronics.com/PUSA/

[@taxiyoyo]

My radio model have red display. I use iPhone 7 with iOS 13. I cannot conect radio and telephone.

[@deckerdotto6035]

What is the model number? The model number usually starts with the letters MVH or DEH.

[@taxiyoyo]

Deckerd Otto mvh-310bt but display color is red not blue. I Think my model works only with android system Ps. In radio i have latest software downloading From Pioneer site and nothing

[@deckerdotto6035]

Pioneer MVH-S310BT Red European version is designed to operate with Android Phones only. Not with iPhone. For iPhone operation I recommend Pioneer MVH-S420BT seen here: www.pioneer-car.eu/eur/products/stub-37

[@azaelcastillo7018]

Not working on iphone XR

[@deckerdotto6035]

I recommend to restart your phone. Delete the Pioneer Smart Sync App from the phone, and the re-install the app from the app store. Delete the phone from the in-dash receiver's Bluetooth Memory. And delete the in-dash receiver from the Phone's Bluetooth memory. Now begin the phone pairing process from the beginning. You can see it here: kzbin.info/www/bejne/fJ6VhmR5oJakorc You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@Collinormous]

Same here with an iPhone X. The radio shows up in the connect list but it does nothing.

[@Collinormous]

I just figured it out. I looked deep inside the manual that came with the stereo, DEH-S31BT in my case, and found that it doesn't support apple devices at all.

[@Collinormous]

I returned the DEH-S31BT and got the MVH-S310BT and now the app and everything works normally.

[@ericbena1686]

Have a similar model, will not stop scanning stations when you try to change the volume

[@deckerdotto6035]

What model of Pioneer in-dash receiver do you have? Are you using the Smart Sync App? Do you have a Steering Wheel control adapter installed in the system? You can find more videos from Pioneer here: kzbin.info

[@osamadavid9727]

Mines is weird it’s like when I put on the turn signal it’s like it’s connected to the stereo it’s very loud

[@deckerdotto6035]

What model number of Pioneer in-dash receiver do you have? The model number of the in-dash receiver is printed on the face of the radio usually near a corner. Please explain the issue a little more clearly. Is it like you hear the turn signal? Or are you hearing the turn signal? This is not normal operation for a Pioneer in-dash receiver. Was an adapter used in installation to retain the factory door chime or other factory audio alerts? You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@vabs6923]

I have a problem mobile is connected with Directly Bluetooth to Bluetooth not with app

[@deckerdotto6035]

What in-dash receiver do you have? What phone do you have? Be sure to select Bluetooth under the App Control Setting on the in-dash receiver as seen here: kzbin.info/www/bejne/noelaKSJebeBecU You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@Vilvane]

My pioneer app only has information... It started normal looking

[@deckerdotto6035]

Please be more specific with your question. What Pioneer receiver model number do you have? Is the app connected to the receiver? You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@SerrAvid]

Bro is it just me but my radio wont stop whistling its annoying does any one know why? When I press the gas it whistles more

[@deckerdotto6035]

This type of electronic noise, or alternator noise, is usually associated with a poor ground connection for the in-dash receiver. Please return the vehicle to the installer and demonstrate the issue or check the wiring. The Black wire needs a good ground connection to metal in the body or frame of the vehicle. You can learn more about it here: kzbin.info/www/bejne/oYOVfoJooNx5q8k You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@kristfur]

Pioneer needs to put out another radio with Auto Time Alignment. All head unites should have that as a built-in feature.

[@deckerdotto6035]

Pioneer has many in-dash receiver with Auto Time Alignment. Both 1DIN and 2Din models. Here is one example: kzbin.info/www/bejne/fmWkgIungKtpZrM here is another: kzbin.info/www/bejne/kGmZl4SortSFjM0

[@dadabayoda6307]

My radio goes off when I increase my volume why

[@deckerdotto6035]

This is very likely an installation issue. Here are a few possibilities: First, how many speakers are connected to the in-dash receiver? Pioneer in-dash receivers are designed to operate up to 4 speakers in the vehicle. 2 in the front of the vehicle, and 2 in the back of the vehicle. You can't just attach as many speakers as you want. This will lower the impedance shown to the receiver's internal amplifier and cause it to overheat and shut down. If you are attempting to operate more than 4 speakers, this could cause the receiver to protect itself from damage at higher volume levels. A 2nd possibility is a speaker wire is touching metal somewhere in the vehicle. Possibly behind the in-dash receiver, or in a door behind the speaker or some other location. This can also cause the receiver to protect itself from damage at higher volume levels. A 3rd possibility could also be simply a poor connection for one of the Power or Ground wires on your in-dash receiver. You can learn more about wiring your Pioneer receiver here: kzbin.info/www/bejne/oYOVfoJooNx5q8k If you are looking to get more volume from your system, I strongly recommend to use an external amplifier. Amplifiers make life better and they are very affordable. You can learn more about Pioneer amplifiers here: kzbin.info/www/bejne/e165k4h4dqyqd6s and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@jackjones90]

MVH 320BT not connecting to app

[@pioneerelectronics]

Please note this app requires iOS 11.0 or newer. I recommend to press the in-dash receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer MVH-S320BT behind the detachable face. You can see it demonstrated in this How To video from Pioneer: kzbin.info/www/bejne/pWfMkqqGZ5xsiJY Next please follow these instructions: 1. Install the latest firmware for your Pioneer in-dash receiver. You can find the latest firmware for the Pioneer MVH-S320BT here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/MVH-S320BT#downloads The latest firmware is super important. Please install the latest firmware on the in-dash receiver. 2. Delete the Pioneer Smart Sync app from your phone. Next download and install the latest version of the Pioneer Smart Sync App from the Apple App Store or Google Play Store. As of 2022 April, version 4.1 or newer is available. 3. Delete the Pioneer in-dash receiver from your phone's Bluetooth Memory. 4. Restart your phone. 5. Delete all phones from the in-dash receiver's Bluetooth memory. You can see this demonstrated in this How To video from Pioneer: kzbin.info/www/bejne/laKVkn-mlLt0m9E 6. Pair your iPhone to the in-dash receiver through Bluetooth. You can see this demonstrated in this How To video from Pioneer: kzbin.info/www/bejne/amOofZKAfL2WgNU 7. After the receiver has been paired to the phone through Bluetooth, on the receiver, check the App Control Setting. Be sure to choose Bluetooth for App Control. You can see this demonstrated here: kzbin.info/www/bejne/bJSqlmuqpaiFqqc 8. In most cases this will connect the Pioneer Smart Sync app to the receiver through the phone. If it does not succeed, please be sure to follow the instructions given with the Smart Sync connection Wizard included with version 4.1 of the Pioneer Smart Sync app. You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@jackjones90]

@@pioneerelectronics ios operating system

[@pioneerelectronics]

@@jackjones90 Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? I recommend to press the in-dash receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer MVH-S320BT behind the detachable face. You can see it demonstrated in this How To video from Pioneer: kzbin.info/www/bejne/pWfMkqqGZ5xsiJY Next please follow these instructions: 1. Install the latest firmware for your Pioneer in-dash receiver. You can find the latest firmware for the Pioneer MVH-S320BT here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/MVH-S320BT#downloads The latest firmware is super important. Please install the latest firmware on the in-dash receiver. 2. Delete the Pioneer Smart Sync app from your phone. Next download and install the latest version of the Pioneer Smart Sync App from the Apple App Store or Google Play Store. As of 2022 April, version 4.1 or newer is available. 3. Delete the Pioneer in-dash receiver from your phone's Bluetooth Memory. 4. Restart your phone. 5. Delete all phones from the in-dash receiver's Bluetooth memory. You can see this demonstrated in this How To video from Pioneer: kzbin.info/www/bejne/laKVkn-mlLt0m9E 6. Pair your iPhone to the in-dash receiver through Bluetooth. You can see this demonstrated in this How To video from Pioneer: kzbin.info/www/bejne/amOofZKAfL2WgNU 7. After the receiver has been paired to the phone through Bluetooth, on the receiver, check the App Control Setting. Be sure to choose Bluetooth for App Control. You can see this demonstrated here: kzbin.info/www/bejne/bJSqlmuqpaiFqqc 8. In most cases this will connect the Pioneer Smart Sync app to the receiver through the phone. If it does not succeed, please be sure to follow the instructions given with the Smart Sync connection Wizard included with version 4.1 of the Pioneer Smart Sync app. You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@jackjones90]

@@pioneerelectronics i live in europe and i can't connect with mvh 320bt smart sync iphone. what you wrote doesn't work

[@jackjones90]

@@pioneerelectronics Why is there no Apple IOS support for the European MVH 320BT?

[@rcwildman9255]

Still does not work 😕

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? Are you sure the receiver is designed to work with Pioneer Smart Sync? What is the phone you are trying to connect with the Pioneer Smart Sync App? Please be sure to install the latest firmware for your Pioneer in-dash receiver. Also please be sure to install the latest version of the Pioneer Smart sync app on your phone. As of 2022 March version 4.0 or newer is available. You can find more videos about Pioneer Smart Sync here: kzbin.info/www/bejne/hISoYqCGlNV4ptE And you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@rcwildman9255]

@@pioneerelectronics I have the deh-s31bt. It has everything on the radio settings shown on this video. I’ll have to update the radio firmware that’s the last thing I can think of. Because everything else is the same as the video. It just won’t connect to my phone. (Apple iPhone 11 Pro Max)

[@pioneerelectronics]

@@rcwildman9255 I recommend to update the firmware on your Pioneer DEH-S31BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Walmart/DEH-S31BT#downloads Please watch this video for help in connecting your iPhone to the receiver through Bluetooth: kzbin.info/www/bejne/fJ6VhmR5oJakorc If you phone still won't connect to the receiver, please be sure your phone is not connected to another device like a headset or a portable speaker. This can block the in-dash receiver from connecting. Also, please be sure your in-dash receiver is not connected to another phone. This will also block the receiver from connecting to your phone. I recommend to delete the Pioneer in-dash receiver from your phone’s Bluetooth memory. Next, power your phone off and back on. Make sure your phone has the Bluetooth switched on and make sure your phone is NOT actively connected to other Bluetooth devices like a headset or a portable speaker. This may block in the in dash receiver from connecting to the phone. Next, I recommend to delete all phones from the in-dash receiver’s Bluetooth memory and restart the vehicle. Next begin the phone pairing process. Open the Bluetooth window on your phone. Make sure Bluetooth is switched on. Keep the phone’s Bluetooth window open. This will make the phone visible to other Bluetooth devices. Make sure no other phones are actively connected to the in dash receiver when you attempt to pair a new phone. On the in dash receiver, make sure Bluetooth visibility is switched on. For the Pioneer Smart Sync App, I recommend to delete the app from your phone. Then download and install a fresh copy of the app to your phone.

[@noelmagne7657]

Thanks 😍

[@pioneerelectronics]

You can find more information about Pioneer Smart Sync 4 in this video from Pioneer: kzbin.info/www/bejne/hISoYqCGlNV4ptE You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@martinhogan5970]

Very helpful.

[@deckerdotto6035]

You can find more videos about the Pioneer Smart Sync App here: kzbin.info/www/bejne/qJXFeZ-lZ5eHj7M and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@gaetano2292]

Qualcuno che possa riassumere in italiano? Grazie

[@beebyemm820]

Frist I buy alpine ute92bt I returned because I don't like the sound and other and now I just buyit the pioneer MVH S510 bt, I like it and I what to keep it it sound great with bose sistem in my alfa Romeo,I do not know how to make the settings for the audio I things is sound more better than that, anyway I was disappointed for one think after all bevouse I was excited of the in Dash app pioneer smart sync to my iPhone x works great butttttttt I buy it an iPad yesterday special for navigation in my car with this great app yours but I have a ugly surprise the the app is not full compatible to ipad air is not on full screen and I was disappointed for that because the people wants in the car always bigger screen is a great app why not? Please development do something for iPad compatibility ad full screen on the iPad air 9,7 or later!hope is coming sun this because is pity!

[@deckerdotto6035]

As of 2019 March, the Pioneer Smart Sync app is designed to operate with iPhone and Android Phone only. You can find more videos for operation similar the MVH-S510BT here: kzbin.info/www/bejne/kGfKYXiFhb9_ZsU and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@sammmyds39]

Great love it 😊

[@varunsingh5330]

Big fan of u

[@michan8531]

Not working IPhone 6s

[@deckerdotto6035]

Can you be more specific about the issue you are experiencing? Does the phone connect to the in-dash receiver through Bluetooth? Can you make and receive phone calls through the in-dash receiver? Can you play Bluetooth Audio music from the iPhone through the in-dash receiver? What version of iOS are you using? Do you have the Pioneer Smart Sync app installed on your phone? You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@michan8531]

Deckerd Otto so I connect with a bluetooth phone, I can listen to music, receive calls, I have applications installed on my phone when I am looking for a device on the phone, i.e. radio, I am searching for device and there is zero reaction, IOS version is 12.1.2

[@deckerdotto6035]

What model number of Pioneer in-dash receiver do you have? Once you have connected the iPhone and the in-dash receiver through Bluetooth, make sure you have the App Control Settings on Bluetooth.

[@johanneskauppinen4228]

Miks ei toimi suomes

[@deckerdotto6035]

What model of Pioneer in-dash receiver do you have? Do you have the microphone plugged into the back of the in-dash receiver? You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@paulford540]

Omg can we make things more complicated Why not try Using actual words instead of hieroglyphics that way a guy can remember what the buttons do Typical USA engineering nobody uses English anymore always pictures

[@deckerdotto6035]

You don't need to use the Pioneer Smart Sync App for any operation on the in-dash receiver. What is the model number of your Pioneer in-dash receiver? If you have a question about the receiver's operation you can post it here. You can find a Pioneer How To video showing how to change the language to English here: kzbin.info/www/bejne/aqnJXqWZbq54pc0 You can find a full playlist of How To videos from Pioneer here: kzbin.info/www/bejne/mn7WfWBrqtyindk You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@varunsingh5330]

Hi.i am smart sync

[@dyvlog2901]

Second!

[@deckerdotto6035]

You can find more videos from Pioneer here: kzbin.info

[@bobcoyle6681]

First!