Trane XR80 Gas Furnace Not Heating - Blower Motor & Control Board Replaced

[@ПокровскаяВалерия]

Thank you for showing the importance of proper licensing. A true pro!

[@bayanmahmoud9648]

I learned so much from this video. You’re a fantastic teacher!

[@kens.3729]

Wishing you a Very Merry Christmas and a Safe, Healthy and Happy New Year. 👍🙏

[@PipeDoctor]

Happy holidays to you and your family

[@eduardagoncalvessouza9287]

Thank you for showing what quality service looks like! 🙌

[@andresbarragan8595]

GUAUUUUUUU FROM CHICAGO GOD JOB EXELENT VIDEO THANK YOU SO MUCH

[@cryptopunks7051]

Pipe Doctor never fails!

[@gregmercil3968]

The tripping high limit makes me think it’s a dirty evap coil, based on seeing how dirty that blower wheel was.

[@PipeDoctor]

That’s also a possibility

[@throttlebottle5906]

probably oversized by far, half the registers closed/broken/blocked, lack of return air and plugged everything. you know, the usual hacked and butchered dinosaur homes. 🙄

[@JakePorterHVAC]

I know you can't show everything in the videos and you probably already thought about this stuff. I understand its an emergency call with after hours/weekend rates too, so you don't want to rack up hefty labor charges at those rates since you look out for your customers. If it is still an issue during normal hours, do a temp rise test. You might have done this stuff off camera already. Check the air filter and confirm the registers are open. If needed, up the blower speed to medium high for heat since its a 4 speed motor. Would try to push more air for the heat call. Medium low sometimes isn't enough air. Also, confirm the gas pressure and see if it can be adjusted down and the combination of the 2 adjustments could help that temp limit not trip. Stay safe and warm out there. Thanks for the video.

[@HvacGregG]

Good points 👍🏻👍🏻

[@FredD63]

Change that damn chirper battery 🤣…… Merry Christmas Mickey Pipes ….

[@PipeDoctor]

I’m immune to those chirping alarms

[@FredD63]

@ Seems like one is always chirping when I help my HVAC guys out

[@eduardagoncalvessouza9287]

Pipe Doctor is the superhero of home repairs! 🔧🦸‍♂

[@christopherm.burleson164]

Fixed it perfectly, thanks!

[@Hvacrpro123]

I’ve been doing it for years and it has never let me down

[@tycurtin7565]

I was told to replace my furnace 14 years ago when the circuit board shorted out and blew the circuit board. I said replace the board and she's still running great to this day.

[@danobrien3109]

Someone is brilliant. The last Trane was installed in front of a jackpost, this one has the gas cock inside the cabinet. Obviously Trane installation training is “SPECIAL “. Happy Hanukkah Mike to you and your family.👍👍🇨🇦

[@cryptopunks7051]

Fast and efficient! 🚚💨

[@HvacGregG]

Like that shaft blaster

[@Aepek]

4:36 here in Florida, the HVAC companies that come and do a tune-up when have service agreement with do not clean fan motors or blades, do not clean outdoor unit with hose or blow out leaves and junk, they just check indoor units and see if clocked lines, put cleaner down and hook shop vac to condensate line outdoors and then add water back so not dry. That about all they do and have time don’t screw covers in correctly and always fixing along w/ cleaning up all the crap from shoes etc…when leave. DO LIKE HOW THOROUGH you guys are and CLEAN!

[@PipeDoctor]

We typically spend one to two hours for an HVAC tuneup

[@tombalboni2143]

Damn I'm just holding my breath while you clean the blower wheel!!!

[@martyober4833]

Mike, Happy Hanukah

[@MarkMattox]

Good job. Man that smoke detector chirp was annoying.

[@PipeDoctor]

So just like the homeowners, I am also immune to the chirping sounds of smoke detectors and carbon monoxide alarms

[@Note_Creator]

That bundle of wires by the gas line. Does it have a bare spot on them from rubbing against the edge of the sheet metal. Does the upper door squash them against the sheet metal more?

[@PipeDoctor]

No. It don’t

[@HvacGregG]

Holly cow that is dirty that what happens when you don’t change the air filter frequently good stuff

[@everettstevenson2111]

Hey Mike Daick, Happy Holiday to you and yours. Mikey open the pod bay doors, Mikey open the pod bay doors, Mikey open the pod bay doors.lol.

[@alanleigh2175]

Just to be clear you left the job with the cover still removed? If so what’s the plan?

[@Aepek]

7:19 OK, that is the way to do it, first time seeing a tool like that, where I usually just use ban saw to zip it off. That pretty cool. Also, I’d put new battery in smoke detector b/c the beeping in making me whacko🤪

[@PipeDoctor]

It’s called the shaft blaster

[@cdubs1723]

NSFW

[@c21meister]

Do you think it could be oversized?

[@YouzY666]

I get it that it's a 20 year old unit and it's a emergency sunday job, but I'd like to know if washing the blower wheel is reserved for summertime as a extra that customer can choose? Don't wanna be creating slipping hazards with icing conditions outdoors anyway

[@Steve-bm2zm]

John Phillips posted On his personal FB page 5 hours ago I think all is well. Probably just taking some time off.

[@PipeDoctor]

Thank God, he’s still around

[@tphvac87]

Just started watching, really hope you clean that wheel Mike. Water works better than a nylon brush, just saying….

[@scottmaz4063]

Merry Christmas and happy Hanukkah pipes

[@PipeDoctor]

Happy Holidays!

[@jbenn06j]

Do you travel to cny ? No one can fix my heat

[@davidlampe4153]

I don’t doubt that the homeowner has a dirty fan, they probably have dirty ductwork too. I’m surprised that they didn’t opt for duct cleaning, maybe after they watch the video you can sell them a new system and they can get their ducts cleaned. Side business for you?

[@Hvacrpro123]

Your welcome

[@throttlebottle5906]

ahh, the old rubber isolator end mounted motors, it rotated around and eventually rubbed through the wires. bzzzzzt, game over.

[@FullSendPrecision]

Those darn ceiling birds

[@PipeDoctor]

There everywhere

[@dmitrynetes3102]

Great video. Happy Hanukkah Mike!

[@PipeDoctor]

Happy holidays!

[@dmitrynetes3102]

So the board was toast? Or a likely suspect?

[@PipeDoctor]

@ yes sir

[@BillyFromTheHills01]

Yo Mikey, or anyone who's used it, would you recommend Housecall Pro for a one man operation?

[@PipeDoctor]

I would recommend ServicePal for a one-man show

[@BillyFromTheHills01]

@PipeDoctor Thanks! Merry Christmas, Happy Hanukah, New Year and all that stuff!

[@scottvolage1752]

Make the trades Great again Mikey Pipes. #LoveBosch smash that Like button for Santa Claus. Smash a Raindeer

[@ПокровскаяВалерия]

Licensed and it shows!

[@Hvacrpro123]

Mikey pipes use a hammer drill with a pointed tip and hit that shaft with the hammer drill they pop of in seconds

[@MWestern-m4g]

Yea Baby. We not only had asbestos flooring but also insulation and the siding on the house . Can't hurt you if you can't see it right?

[@PipeDoctor]

You got to be kidding me!

[@throttlebottle5906]

just don't disturb it and all is fine.

[@pambroselli]

NIce job MIke, too bad they went with the parts and labor. They are going to regret this decision pretty quickly. You were honest with them and made sure they were safe from CO, at least until that heat exchanger gives out. Happy Hanukkah and may God bless you.

[@PipeDoctor]

Merry Christmas and Happy Holidays!

[@kens.3729]

Second Service Call this week with a 🦗Cricket 🦗Infestation. Either Customers are Deaf or their Hearing Aid batteries are Dead. How can they Not Hear it ? 🤪👎

[@PipeDoctor]

They are immune

[@mikez1968]

I would of fired you for not checking the supply and return temp. Here comes a callback

[@PipeDoctor]

Well, guess what? It’s been almost 72 hours.

[@throttlebottle5906]

it will just bang off the high limit, until it doesn't because something failed. 🙄 probably been doing that for the last 3 years or it's whole existence.

[@curt3548]

I would have checked temp. rise. Manifold gas pressure and checked the AC coil when you had the blower out. Otherwise, it's all good.

[@PipeDoctor]

Thanks for sharing your feedback yeah, I could’ve checked that as well

[@scottmaz4063]

Well done pipes

[@PipeDoctor]

Ty again. Happy Holidays

[@jamesg9936]

Why does that motor sound as bad as the old one?

[@PipeDoctor]

It’s the inducer assembly, silly

[@bradmarshall7075]

They need a new furnace and AC!

[@PipeDoctor]

Absolutely agree

[@richroj]

another entertaining and informative video Mike 👍💯

[@PipeDoctor]

Thanks for watching!

[@everettstevenson2111]

Hello dr henry p davis lll of the first baptist church of highland park. Checking in on the blue collar community again. Who Mikey, well he pleaded not guilty again. The Lord of host said, don't play with him, go play with your brothers and sisters again.

[@PipeDoctor]

Thanks for your continued support

[@daggggy]

Its not that hard to stop a trane LOL

[@bradmarshall7075]

Trane equipment is better than most! How it’s installed and maintained is the most important!

[@kens.3729]

@@bradmarshall7075Really Darn Expensive also so it Better be Reliable. 🤔👍

[@jrmilchling9215]

as soon as trump starts the economy back up thing will be better hold in there mike

[@PipeDoctor]

First thing he’s gonna do is cancel all these electrification rebates

[@smeyers9284]

great job nice to see a furnace video every once in awhile

[@PipeDoctor]

Thanks for watching!

[@jorgewilliams2985]

GOOD JOB MIKE GODBLESS HAPPY HANUKKAH AND FAMILY MUY BUENO SHALOM BENDECIONES ❤❤

[@ThePeavey23]

Did you just waste 500+$ on a 20 year old unit? New 80% cost 2500$ installed last another 20 years.. hope that heat exchanger isn’t ready to pop because it’s yours now

[@wundo9372]

2500?? Here he is officers, This is the Hack you’re looking for!

[@ThePeavey23]

@@wundo9372 basic unit is 60k btu is 950$ sheet metal and some gas nipples 1200$ for materials maybe with no chimney liner . 1300$in labor one guy 5 hours of work. Have fun robbing people I’ll take your customers

[@PipeDoctor]

It’s nice to see engagement from those who sell themselves short and die broke. Happy holidays thanks for sharing your feedback.

[@ThePeavey23]

@@PipeDoctoror business owners who have to pay for there boat and new trucks by charging 6k to a old lady . It’s cool I’ll take all your customers