Thanks for featuring us Ben! I appreciate it a ton! Super cool to be featured alongside other great options!
@DaveandDebe6 ай бұрын
Where are you located I live in Tampa and there's no listing of your business whatsoever do you have an address or a phone number because nothing comes up when I search for you?
@Razorback_Tactics6 ай бұрын
How do I see y'all's offerings?
@l337l0gan6 ай бұрын
@@Razorback_Tactics I found them on Facebook and messaged there.
@wisemencompany6 ай бұрын
@@Razorback_Tacticsgo to their instagram. Tampa Gun Werx
@keithrange44575 ай бұрын
6:58 - ive seen guntubers sacrifice their face and arms, shooting ported guns from retention. It is definitely not just gas expelled. Shards of copper jacket and lead are ejected and can be deeply embedded in your skin. Nightwood Guns channel fired many different types of ports, including ports created via EDM, and those still ejected shrapne - shown on video Im not saying dont carry ported guns, just be aware that in close retention firing, it can potentially permanently blind you (id not be concerned with small shrapnel hitting your arms in a self defense use, just the eyes)
@patriotfromthenoket61416 ай бұрын
Well done. I’m a huge fan of the MT Lucky 7’s as well. The most expensive and lead times are long but worth it. Always wanted to compare to their Ghengis comp. 🤘
@davidaustin44076 ай бұрын
Porting just works! I think the people bashing have just never tried it. I have fired in darkness and was never blinded. I have fired ported J-frames from inside jacket pockets and there was no fire to my clothing. Anything that helps mitigate recoil and increases followup shots is worth having. Porting has come a long way. I am an old head used to magnaporting and Glock 19c's. The stuff coming out now is very impressive but also very expensive. Thanks for your video
@blantant6 ай бұрын
I go back and forth on the reliability. My Glocks with ports and lighter springs have to be cleaned and lubed eventually (1500 rounds) whereas my nonported ones never. Also there is very weak ejection with light ammo with ports. Is that minor decrease in the reliable operational window worth it. People can make that choice for themselves
@wisemencompany6 ай бұрын
I have never experienced what you are saying. Factory springs and same old Glock reliability, even with frangible ammo.
@terrarecon3 ай бұрын
Shooting a ported firearm in the dark and not being blinded does not tell a full story. If you are in pitch black darkness and your eyes have settled into their night vision mode, you will experience port blast affecting your night vision. If you are shooting in an environment at night that has some lighting, then your eyes have not settled into full night vision mode. I am not hating, I am going a little bit more in-depth on something that has nuances people overlook or never consider. Carrying a ported pistol for EDC makes sense because most people are going to be going about their normal business in the day and at night where they go into a restaurant, a Quick Trip for beer, your eyes are constantly be subjected to light sources at night. If you are in a purely tactically environment so dark that you almost need night vision, ported and compensated firearms are not ideal. There is more to, "it just never affected me."
@saintmichael7533 күн бұрын
At 7:13 you mention ported retention shooting dangers myths being dispelled repeatedly, do you mind sharing any recommended vids on this? As others have commented, Nightwood Guns channel and others have vids clearly showing spalling/shrapnel coming out of ported barrels and it literally embedded shrapnel into his own arm for months.
@njcranes6 ай бұрын
I also have a 7 port done, just like the MT, but done local to me in Philly at Printz F ireA rms. Totally changed the handling of my 5" Prodigy. Amazing
@GlockFanboy456 ай бұрын
PORT EVERYTHING!! Thinking about porting my Axg legion I wonder how that will be with it already being comped?
@Tampagunwerx6 ай бұрын
If done correctly can help even more with reduction!
@tony-kq5iw6 ай бұрын
I’m on the wait list with Monsoon Tactical to get lucky 7’s porting on my Echelon and Staccato P. Can’t wait
@wisemencompany6 ай бұрын
Worth the wait.
@GlockFanboy456 ай бұрын
Sent my echelon slide out to get ported can’t wait for it to come back feels like forever!
@TheContemporaryCrusader6 ай бұрын
I need to try out ports one of these days, maybe on the Staccato P. I have micro comps from PMM and Radian and have been extremely happy with them. Thanks for the info!
@wisemencompany6 ай бұрын
Miss ya man.
@TheContemporaryCrusader6 ай бұрын
@@wisemencompany you too man!
@Tampagunwerx6 ай бұрын
From our testing, something like our K9 Ports perfom better than Comps.
@dano1376 ай бұрын
@@TampagunwerxCan you share how you test them? I’m starting to test different porting styles using a ransom rest and measuring angle of climb to collect actual data that seems to be missing from the industry.
@bubbas.blasters6 ай бұрын
Ports are a part of my religion. I prefer a lighter rsa personally but they are not required as you stated. I find they cycle better and lock back more reliably for me even with my high grip.
@wisemencompany6 ай бұрын
Ahh yes! Good to see you here my friend. You are a connoisseur of the port.
@yockhunter6 ай бұрын
Love the video first timer here. Been waiting on a video like this to hit my feed, going to port my Sabre Dagger
@Tampagunwerx6 ай бұрын
We know a guy....
@galenclaybrooks6016 ай бұрын
I used Tampa gun werxs my oz9 was really flat, I would get your stuff done asap , when I sent mine in the turn around was 4-5 it doubled in a week so I expect it to keep getting longer and longer
@shannonmarcantel79936 ай бұрын
I run a ZEV OZ9C with a ramjet, tungsten guide road and 15 lb spring. Nice and flat with great return to zero. After a lot of testing with spring rates from 13 - 18 I settled on 15. Been thinking about Lucky 7 or DSC V8 for my Staccato P but haven’t decided. Any experience between the 2 port styles? It’s steel frame and doesn’t really need it but it’s fun to play.
@wisemencompany6 ай бұрын
No experience.
@inferninx6 ай бұрын
I am curious about combining porting with a comp on the end. Tier1concealed talked about it in one of their videos, but I’m more concerned about the point of diminishing returns when it comes to porting VS comps, or combining the two, especially with the ramjet. If you comp a gun and then have it ported too, but you run hotter ammo like nato pressure 124 grain as your standard training ammo to take advantage of the extra pressure and gas, at what point is it going to be detrimental or overcompensating? If we’re chasing the dragon of recoil elimination in handguns, we might as well rule out all the possibilities right?
@Richardjohnson6969Ай бұрын
Then do it up and post a video 🤙🏽
@zimbo90876 ай бұрын
Thanks for the info! Would be cool to have the prices included on each of the different options
@kylesmith77336 ай бұрын
Porting absolutely is effective. If it wasn’t I don’t think Glock would’ve sold their “C” model guns, or smith and wesson with some of their performance center guns.
@ethanvanzant24026 ай бұрын
I have a G34 with Legion Precision porting. Thing shoots like a dream.
@memedealer171Ай бұрын
With your carry, what ammo do you use? And did you change the recoil spring?
@fayth255676 ай бұрын
What’s your thoughts on the Glock 19c? Is it a worthy option?
@wisemencompany6 ай бұрын
It’s a fine gun but the ports are not as effective as any of these in the video.
@b-rye50942 ай бұрын
Have you experienced any malfunctions due to the porting? I had a radian ramjet and it exasperated glocks limp writing issue in a g19 and a g45. If I shot without a really strong grip I would get failures to extract. If I would shoot non dominate hand I would get a malfunctions on almost every round with both guns. Take it out and had zero issues, even trying to limp wrist it wpuld cycle, but the comp wouldn't allow it to cycle.
@wisemencompany2 ай бұрын
Tuning is sometimes needed with comps. Recoil springs mainly.
@BishopCross6 күн бұрын
Any issues with spalling on your edc?
@CA.0verview6 ай бұрын
3:30 what spring weight do you have going on for your mac defense porting package?
@wisemencompany6 ай бұрын
Stock spring.
@keithrange44575 ай бұрын
3:25 "Does a longer barrel help ports? - a longer allows more gasses to build up" The amount of gas generated from any given round is going to be identical, even if you have a 0in barrel. However, the further the ports are down toward the end of a barrel will allow better velocity because the gasses have had more time to expand. A longer barrel would accomplish distancing the ports
@Heteachethmyhandstowar6 ай бұрын
Nice video. Some of what you said reminds me of a video I made a while back.
@wisemencompany6 ай бұрын
What’s the name of the video? I’ll check it out.
@DookeyRidr3 ай бұрын
One not mentioned here is Mag-Na-Port, they are the OG of porting work. Been at it for 40+ years with *VERY* effective porting jobs.
@bigbear30622 ай бұрын
A very good review helped me tons thank you sir
@death-to-dogma61423 ай бұрын
What barrels do you send off to get ported?
@curgunner6 ай бұрын
Longer barrel should help with ports just because it’s a more advantageous lever.
@jackjoachim3186 ай бұрын
Is either of the monsoon tactical slides nitride coated. I’m concerned that cerakote won’t hold up to edc.
@wisemencompany6 ай бұрын
No. What is your concern if the cerakote doesn’t hold up?
@jackjoachim3186 ай бұрын
@@wisemencompany just would rather not have to re cerakote it every 2 years or so.
@markburton907418 күн бұрын
How much difference is there between the six-pack and lucky 7? I’m kinda torn between the two.
@bearlee_accurate6 ай бұрын
I see your green g19 slide is a TradeCraft Armament. I have the very same cut with the included 10 hole porting. Is there any reason you went away from that?
@NavYblu996 ай бұрын
In your experience, how does a ported G34 shoot compared to a comped G19? By comped I mean "really" comped (KKM, PMM Ultra, 417 dual port, etc.) I've got this wild idea in my head that a ported G34 would shoot 95% as well as a comped G19 without the reduction in reliability envelope.
@wisemencompany6 ай бұрын
I would always choose a ported pistol over a comp’d. I don’t think comps are bad at keeping the gun level but I have had reliability issues with them.
@Robertrtg-vc3pxАй бұрын
Review an inline port from angel city armory !!
@tspeegle0076 ай бұрын
And you prefer the SRO as well?
@wisemencompany6 ай бұрын
yes.
@DAP-17766 ай бұрын
I liked comps but I’ve gravitated to porting instead. Less issues with logistics.
@wisemencompany6 ай бұрын
I agree
@chrisalexander25345 ай бұрын
Do you recommend three or five ports from Mac defense on a Glock 34?
@wisemencompany5 ай бұрын
depends on your barrel length.
@bernardbarr23546 ай бұрын
Thanks,B
@SmileyShoots6 ай бұрын
Would have been awesome to see the comparison including AlphaDog where the ports are cut on the right and left sides of the slide allowing you to better focus on the rise and fall of your dot!
@Tampagunwerx6 ай бұрын
Cuts made laterally have almost no benefits. Even when talking about V ports. There are significantly more benefits to inline top ports that essentially anything else!
@DaveandDebe6 ай бұрын
I live in Tampa florida, I just did a search for Tampa Gun Works in absolutely nothing comes up, what is the actual name of the place you were talking about? Is it even in tampa? Cuz it's not called Tampa Gun Works
@puma519216 ай бұрын
Is Tampa gun werx
@TheRancor536 ай бұрын
Does monsoon back bore their ports too?
@Butch.Ernesta6 ай бұрын
Great video. Super torn between Luck7’s or RamJet for my g45.
@wisemencompany6 ай бұрын
Lucky 7’s.
@Maurice37746 ай бұрын
NCEngravers do awesome ports also
@michael2w6 ай бұрын
I'll second that. They ported a Canik SFT for me. Was surprised how much of a difference it makes. They do it slightly different than most with the curved / slanted horizontal cuts.
@SpaceRanger1876 ай бұрын
I want to see ported with a comp
@notyoaveragejosay15776 ай бұрын
I wish arc would've kept the bronze barrels
@wisemencompany6 ай бұрын
Yes
@daniellamon88754 ай бұрын
Great video!!!!
@wisemencompany4 ай бұрын
appreciate it.
@PnP-td1mt6 ай бұрын
Is it laser cut or EDM?
@CA.0verview6 ай бұрын
1:30 I would describe it as, it returns, your gun to the original point of them sooner. Vs “flat “
@wisemencompany6 ай бұрын
Good way of putting it.
@CrystalLakeLegacy3 ай бұрын
Did you have Mac Defense re-nitride your slide after the window cut? Asking bcuz I plan on sending them a slide and barrel to port with a bare metal optic cut(if I don’t Rustoleum spray the cut area) and I really like the color and finish of my brownells 34 slide and don’t want something that I won’t like.. and their website pix of their nitride service don’t do a good job of showing the quality of nitriding they do/are having done just like other company’s websites that offer nitride service
@mikejaan666 ай бұрын
I have a Glock 19C and XMacro and they are pretty legit for a factory guns!
@529adreyes6 ай бұрын
@mikejaan66 do you prefer one over the other ?
@mikejaan666 ай бұрын
My 19C has a stipple and accelerator cuts it runs so flat! I’d pick it over the macro.
@megaman0103912 ай бұрын
Factory comps or ports are they way to go. Less issues.
@Homesteading_heathen6 ай бұрын
I personally love my arc division.
@kalkapahulehua48396 ай бұрын
Same same
@BushLeaguefl6 ай бұрын
I would know that run anywhere 🥰🥰😂😂
@christhompson18113 ай бұрын
Can I get my shield plus ported ❤
@jvz14482 ай бұрын
Check out Floyd’s custom. They do amazing work on S&W as well as other guns
@revvaddictz17 күн бұрын
Had me at Ports!!! Lost me at Glock!!!
@joshmajor86626 ай бұрын
WOW!!!…. I really am spoiled apparently Lol my guy is 1-3 days for porting with 1 cerekote color finish. I drop it off on Friday and pick it up Monday morning 🤷♂️ haha YES!!! He’s a licensed machine shop, not billy Bob with a drill press Lol 😂👍 the catch is, he ONLY does 3 brands and refuses to do ANYTHING “adventurous” 😢
@AJohnSmith6 ай бұрын
Ramjet beats the ARC slide.
@wisemencompany6 ай бұрын
I would agree.
@SunshineAcresCollective6 ай бұрын
I thought this was going to be about drinking Port wine…
@wisemencompany6 ай бұрын
That’s next video.
@tylerfrogley12276 ай бұрын
Port or die
@PnP-td1mt6 ай бұрын
I noticed your guns aren’t locking back when empty
@wisemencompany6 ай бұрын
Sometimes. Magazines are the culprit. Just worn out springs.
@CA.0verview6 ай бұрын
A want my g.
@josephsmith51816 ай бұрын
verified historical fact: The hk vp70 had multiple ports within the first 2 inches of barrel which lowered velocity to subsonic, approximattely 380 velocities. the HK mp5ks had ports within 2 inches of barrel to reduce velocity to subsonic, apprximately .380 velocities apparently uneducated, schizoid ramblings: if you put ports close to the chamber in your barrels you'll lose significant velocity. i'll take ports after the 3.5" mark and not a mm before, than you
@seaocean4868Күн бұрын
its just not worth it over a comp ever
@megaman0103912 ай бұрын
Ports are great, but I've seen reliability issues with glocks and sigs. Slower slide action, dirty sights, FTF and more cleaning. A duty weapon or carry weapon should not experience these issues. Duty weopons should be left stock except for factory ports, optic ready slides or optic cuts done by a reputable company.
@hansblitz77706 ай бұрын
Gamer nonsense that guy's who use these in a martial sense totally ignore. Go play with your little toy little boy.