Pit Bike Speed Test - 14 Tooth vs 16 Tooth Front Sprocket 110cc

[@logancurran]

on these bikes i find that putting a bigger sprocket on the front is a must. on all the pit bikes i’ve ridden 1st gear is so slow it’s barely useable

[@legolas2899]

Brother this right here 😂😂😂 your not going nowhere in 1st unless your redlining and even there you’ll get 10-12pm if your lucky it’s crazy… but back to your comment, do you mean front sprocket as in the sprocket that’s connected to your engine?

[@whatislifebro]

@@legolas2899I think he does yea

[@payformycar]

@@legolas2899he does mean the one in the engine

[@saadathasif5775]

Of course a bigger front sprocket reduces torque but one advantage is that you get better mileage I have a 100cc bike before it used to do It used to do 45 km per liter before, when the big front sprocket was installed, now the same bike is giving me a mileage of 57 km per liter.

[@NateAsaurus]

That's awesome! I didn't think about including that

[@saadathasif5775]

@@NateAsaurus You can also see the difference in mileage

[@saadathasif5775]

@@NateAsaurus I get good mileage with the big front sprocket, not only do I not feel tired on long trips and also the engine doesn't heat up.

[@catalinnicolaevici2061]

Get a nibbi curb! I'm about ti pick up another SSR for 140$ missing the front wheel carb and magneto cap and the chain. Luckily I ordered the wrong carb for my 125cc so I have a 2ed nibbi carb that's a 22mm I got a 24mm on my 125cc

[@michaelnjio]

Great video Hahahaha..I was watching your wrists twisting the throttle and you do it exactly like I do it😅.

[@NateAsaurus]

Thanks for watching!

[@imagine9375]

Sick goggles brosky..

[@mdacosta7013]

cool video man i just ordered a new front going from a 17 to a 18 tooth i was gonna get a 19 but is afarid there might be some clearance issues so i played it safe

[@NateAsaurus]

Good choice, things like that can be hard to judge. Hope it works well for ya

[@dinanbimmertv1864]

Hey so what gains did you see from the 18 tooth?

[@ebrahimmish6868]

Beautiful... clear demo 👌... please tell me the sprocket to change to increase speed is only the front or rear aswell can make the changes ?

[@NateAsaurus]

Yea rear sprocket works too. But on the rear if your looking for speed go smaller in size

[@ebrahimmish6868]

Oh is it ?... i really am needing 4speed ! will arrange small rear nxt when i change and what's up... thanx mate

[@alanyuan1049]

Just got a tao110 as a fixer-upper, anything above 30mph on the trail is plenty fast for me.

[@georgemagalso9201]

I love pit bike bro

[@vennomrides107]

I have a 2022 SSR160TR. Upgrading my chain but also want to upgrade front sprocket. Do u know the stock size? Should I go up or down a tooth or keep stock sprocket?

[@NateAsaurus]

It really all depends on the type of riding you do. I tend to do more street so thats why I went up. First gear is probably pretty unusable stock. On Thumpertalk forum a guy reccomended trying a 17 front tooth to be able to use first gear better.

[@faziletdursun2583]

I own the Rks Titanic 150. I'm thinking of replacing the rear gear of my motor.(43) The aim is to relax the engine.,; the gear ratios are too short, the vehicle can't lengthen, you need to shift quickly, the speed ends quickly, I don't want to shout too much, I'm looking for some 6th gear, I usually ride this engine in reverse, without losing much traction, I was told to make the rear gear 36-38, I'm happy with my engine in the city and I also travel on long roads, they said that Ybr fits as a rear sprocket, otherwise where can we find it, regards, I wanted to get your advice for the front and rear gears, and what brand should I wear as a front spoiler?

[@NateAsaurus]

So for some top end either increase the front size or make the rear sprocket smaller. I wouldn't jump more than 2,3, or even 4 teeth on the front as youll loose too much torque if you jump any more. Im not familiar with brands but id choose steel over aluminum so it has a longer life. Id try increasing the front by 2 teeth to start out. Hope this helps

[@EvansKarugu]

How did this work out for you mate. I too have 43 back and 13 front both stock. I am thinking about 16/17 front. Got big and thick wheels I am not sure this change will affect torque big time. What's your take

[@Largo5441]

Front 15 teeth for good to 110 cc ​@@EvansKarugu

[@heinzletzte.6385]

I am getting this along with a 22mm carb for my lifan 125 for top speed improvement. Someone thought it was a good idea to put a 19mm on that thing.

[@Tburlthegreat]

Throw a vm26 on it

[@heinzletzte.6385]

@@Tburlthegreat With vm26 it is hard to get the idle right on a 125. its a 54×54 motor, but it only has the small valve head also. Maybe with a ported head and cam but on a stock motor vm22 or vm24 is better.

[@Tburlthegreat]

@@heinzletzte.6385 mine kinda surges at idle sometimes but I’m running a fuel pump too. A little tuning helped it but I’ve got a jet kit coming

[@Maxumized]

My 110 does about 52mph with 17/35 and using a pz19. Don’t go too big

[@JAKDRZR]

@@Maxumized I agree. But I went from the stock pz19 to a pz22 on my nephews 110 and it actually helped a ton. The stock carb wasn’t adjustable at all and super lean everywhere. The pz22 kit I got off Amazon was 25$ Canadian. lol. Most of the reason I got it was so I could tune it properly but definetly revs out better/faster. I think the 19 is to small on a 110 but you still need intake velocity for throttle response.

[@Rektonator]

Do you use external mic for is this from gopros audio? Also which gopro do you have?

[@NateAsaurus]

External mic with adapter is run up into helmet. Its a Hero 6 Black but I just found I had quality settings set wrong. You can get the video to look much nicer than i had it in this video

[@Rektonator]

@@NateAsaurus I see, thanks!

[@EndritAl]

Does this work also in my GY6 125 cc scooter.I do not know too much about bikes,I mean should I go with heavier sliders or change bigger front sprocket,if scooters have one?

[@NateAsaurus]

I dont think you'd have sprockets for a scooter engine. You could try heavier sliders but if you overdo the weight too much it may go slower

[@Largo5441]

My choice 15-42 for 100 cc cub bike

[@lazarstijovic3939]

I gained 15.4% on top speed

[@NateAsaurus]

Nice!

[@abhi-qc2bi]

​@@NateAsaurus 14 tooth to 15 tooth

[@Mrbiker-777]

What engine do you have on your bike?

[@benbell7]

Double sided tape under your phone holder might help you keep it still

[@123edwardzpad]

Very cool. Thanks.

[@NateAsaurus]

Thank you!

[@Bob-wo3zv]

In india 100cc bikes have around 60mph top end why is it slow ?

[@argoppog5974]

Hi dude I have a bs3 passion pro (97cc) I upgraded the air filter to a high performance one and retuned the carburettor. Also changed out the sprockets and now it goes 106-107. Tbh I do recommend it

[@Greybuiltracing]

What website exactly is the one you use ? I like how it gives you the percentage. Ty !

[@NateAsaurus]

sprocketcalculator.com

[@Greybuiltracing]

@@NateAsaurus Ty ! 🙏🏻

[@Ron-vo5wt]

What carb you have?

[@NateAsaurus]

It says Mikuni on it but I think its a clone (was like $30). Its 24mm so its big and barely fits but its worked great for me

[@TrippinBusa]

Love the vid dude, I'm about to do my sprockets on my gsx250r and am trying to see if I want to keep it the same stock gearing or change the front to try and get more speed out of the quarter horse lol.

[@NateAsaurus]

Thats awesome. I hope ya make the right gearing decision!

[@TrippinBusa]

@@NateAsaurus kept the front the same at 14 teeth and dropped the rear sprocket from a 46(stock) to a 39. Won't make a huge difference in speed but we shall see if it gets over 87 mph after the change

[@melchizedekbaniaga2443]

does it change the speed of the bike? i mean if you gonna change the sprocket , is it accurate? or does it need to recalibrate so that it can get the actual speed?

[@NateAsaurus]

@@melchizedekbaniaga2443 My bikes speedometer shown is by GPS, so no recalibration needed. If you had a bike like a supermoto/dual sport it reads the speed off of the front tire with sensors so theres no reason to recalibrate it. It will still be accurate

[@jonathanayon9366]

I just got a 18t sprocket for my 110

[@crs.editz18]

I have a 110cc big bore kit from a 70cc engine with 100kg bike and i wanna know how faster it will get. Before with the 70 cc i was going 110 kmh max but very hard to get to 110 but 100 was going ok, now i wanna see the top speed.

[@NateAsaurus]

Wow! 110 kmh is very fast for a 110cc. Is it a 4 stroke too?

[@crs.editz18]

@@NateAsaurus yes its a 4 stroke but 110 kmh with the 70cc engine

[@crs.editz18]

@@NateAsaurus i think i have a video of me going 100 with the 70cc engine

[@motivationJK11]

I make that engine run 84

[@WilliamThorpe-m7o]

I did not know that lol

[@sun6v546]

👏👏👏👏.....