Pittsburgh 3 Ton Floor Jack - Quick Setup

Epic Help shows you how to quickly get your new Pittsburgh 3 ton heavy duty rapid floor jack operational. This jack was purchased from Harbor Freight Tools and the instructions that came with it are not good for assembly. If you follow these steps and find out your jack will not hold a load, then you will probably need to purchase some jack oil. Since this jack is new it already has jack oil and should not need any more.
#FloorJack #QuickSetup #CarJack
DONT CLICK THIS: bit.ly/3udVAKR
Music:
Catalyst by Alexander Nakarada
Link: filmmusic.io/s...
License: filmmusic.io/s...
⚠ DISCLAIMER:
Epic Help strives to make the information provided in this video as accurate as possible. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Epic Help makes NO claims, promises, or guarantees about the accuracy, completeness or applicability of the content within this video. All DIY (do it yourself) projects involve some risk. It is the sole responsibility of the viewer to accept this risk. Epic Help is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@Blackyautoelectric]

Who else was watching this video to see how to remove the plastic piece ‽.. 😂

[@ackmanxx]

Yuuuuuuuuup

[@doodledo5226]

😂

[@albertozarate9870]

Really ? lol I took that out with my hand

[@ackmanxx]

Mine must've been jammed because no amount of hand force could remove it

[@MrAboutLife]

Same here, i accidentally bent the rod it was attatched too, do you think it will cause issues in the future ​@ackmanxx

[@hulitonuras4177]

Damn paper instructions are a mess of useless double talk. They should have just put a link to this video.

[@NotChillin]

Thank you sir, I accidentally broke my plastic thing before I got here but the video was helpful.

[@EpicHelp]

You're welcome. Thanks for watching!

[@DorisCozart-sw3ne]

​@@EpicHelp0m

[@happyface9_KICK]

Lol same I thought I broke it and had to take it back

[@basavaa3877]

Exactly I wanted to know Step 3 and step 4. It was helpful. Thanks.

[@EpicHelp]

You're welcome. Thanks for watching!

[@703am]

have had one of these jacks for almost two years now, working great well worth buying

[@desireelyons7339]

Thank you so much! Me and my husband just got a new jack and you gave us better instructions than the directions that came with the jack !

[@EpicHelp]

Glad this video helped. Thanks for watching!

[@EpicHelp]

This video helps you setup your new jack quickly. If you successfully finish step 6 in this video, which is a load test, you probably don't need jack oil. Hope this helps with any misunderstandings. ***Some jacks need oil, so if step six fails then add oil.

[@emilioreynoso978]

Literally the information I was looking for. THANKS

[@tinocontreras5105]

Was looking for the same info. Why not have the oil come with the jack. Makes no sense

[@jamesdilley1918]

Looks like a good one ! TFS

[@josemata3845]

I removed the plastic piece by pushing the handle down

[@barringtonmorris90]

Thank you!!!

[@gc6790]

Thanks for showing this!

[@EpicHelp]

Thanks for watching!

[@josemata3845]

Is anyone missing the bolt to secure the handle

[@robertkamanzi9147]

Thank you. The directions that come with it are crappy, quite useless. I work very well with graphics and demonstrations. Somehow manufacturers are too lazy to include just those basics graphics for first time users. Thanks again. Didn’t even know about the little plastic piece u til I watched your video, thank you.

[@EpicHelp]

I'm glad this video helped you. Thanks for watching!

[@matthewliberatore3832]

The instructions said to top off the hydraulic fluid before using. Is that Necessary or does it already come with enough in there to be functional

[@JimboSliceXX]

So does mine.

[@EpicHelp]

If you successfully finish step 6 in this video, which is a load test, you probably don't need jack oil.

[@MOAON_AABE]

Your the man, thanks

[@optorch131]

Thank you for the good video. Very helpful!

[@EpicHelp]

You're welcome! Thanks for watching.

[@arthurl.9985]

Should I top off the jack oil on the new jack? I just bought one of these.

[@EpicHelp]

Do everything in this video. If it holds the load of a vehicle, then the oil level is good. The jack is new and probably does not need extra oil.

[@arthurl.9985]

@@henrycruz45cal Thanks for the help. The hole is small,how do I know if it's full? Do I just fill till I see the oil level reach the threads.

[@drummer_zay9493]

@@EpicHelp Mine actually needed oil, they mustve updated this once they figured customers had to buy separately and were getting annoyed lol

[@EpicHelp]

Some of them do need oil, but from my experience most don't need it.

[@michaelgranados2714]

Why is the oil leaking everytime I try to pump the jack ?

[@danpeete3014]

THANK YOU FOR MAKING VIDEO!!!!!!!!

[@EpicHelp]

You're welcome! Thanks for watching.

[@mikem5922]

Is it normal for the Jack to settle a bit when it’s pumped to maximum height without load? Mine always seems to lower perhaps half an inch to an inch. It’s just out of the box and I have yet to use it under load.

[@EpicHelp]

Yes, I found this to be normal when pumped to the max height.

[@MrAboutLife]

How come my pumps out oil everytime i pump???? 😢 any help i just barely am using it after buying it a week ago

[@spencerwilliams5449]

How many times did you turn counter clockwise? Could be a bad seal of some kind, I’m sure they’d exchange it if you just recently purchased.

[@josephr.8622]

Anyone know if the slate grey version is essentially the same?

[@209Stretch]

I’m almost certain it is, I got the slate grey.

[@Nate-vf2js]

Does the handle supposed to stop or keep going in circles

[@EpicHelp]

It keeps on spinning, so a few spins should do it.

[@MrPerry61]

my directions said to fill the reservoir.

[@EpicHelp]

So did mine. Now you know why I made this video. Thanks for watching!

[@George-mk7lp]

Is the handle removable ?

[@EpicHelp]

Yes.

[@adriancanestra6910]

Ok, I feel pretty fuckin stupid right now. In my defense, there were no instructions in my box but without this video I would've never taken that rubber piece out or figured out how to lock the handle.

[@orthodox1717]

Followed this and Jack did not pump 🤷🏻‍♂️

[@EpicHelp]

Then you need oil or the jack is defective.