I love those. I have to get a couple of those for some projects i have in mind for when my move is done.
@cw2a8 күн бұрын
😜🇺🇸❤️🩹🙏❤️🩹🇺🇸😜
@iwsbull14179 күн бұрын
I hope they go on easier over powder coating than regular gas checks do.
@cw2a9 күн бұрын
@@iwsbull1417 Afternoon man! They go on with firm resistance. But I dont have problems with GC/ pc as long as I thinly apply my PC. (Sift it alot more!)
@ocean3749 күн бұрын
Morning cw looks great I tried them before and I was ripping them so what I did is sizing them twice I found it to be a pain and never did it again maybe it was too thin no clue thanks for sharing
@cw2a8 күн бұрын
Your sizer need polishing!! Needs to be very smooth. Also you can lube with light oil.
@tripplebeards34279 күн бұрын
That’s pretty slick. I always use the gas checked bullet molds. I need to get my hands on some of those and try on my 10 mm.
@cw2a9 күн бұрын
@@tripplebeards3427 Im having difficulty finding correct 10mm checks. Sages had these.
@tripplebeards34279 күн бұрын
@@cw2a if you run into them let me know.
@bigracer38679 күн бұрын
I like that!!🎉
@cw2a9 күн бұрын
@@bigracer3867 Useful tool to stick on a shelf till ua need it!! ❤️🩹🙏🇺🇸🇺🇸🙏❤️🩹
@Farwalker2u8 күн бұрын
What is the material that composes that projectile? It looks a bit like olivine, not lead.
@cw2a8 күн бұрын
@@Farwalker2u It is an aluminum. Im starting talks with one and have been talking with another Check Maker. The claims are ya use beer cans!! Printing plates and the like. So "cheap" gas checks. But its all about thickness so know what thickness your check maker is designed for.
@theturkeysopinion9 күн бұрын
I like it
@cw2a9 күн бұрын
🙏😜❤️🩹🇺🇸❤️🩹😜🙏
@glendavis96632 сағат бұрын
Hey CW where did you find those plane face gas checks?
@cw2a34 минут бұрын
@@glendavis9663 I make some and the 10mm I just bought @ Sages.
@NomadicHacker.8 күн бұрын
Is there any different cleaning you need to do with aluminum going down the bore
@cw2a8 күн бұрын
@@NomadicHacker. Some complain. It definitely can but I haven't found it to be any kind of issue and it cleans with ease. But Its not a new thing.
@viejo2a9 күн бұрын
Cool! Thanks for showing us. I’ve never seen anyone actually do it. 🤛🏻🔫🇺🇸
@cw2a9 күн бұрын
@@viejo2a 😳😳😜🤘🏼😜🇺🇸🇺🇸
@jamespugh9 күн бұрын
I seen those offered next time toss a order in in buying a pack. Think cool . I see ur working on 400 ledgen ❤.
@cw2a9 күн бұрын
@@jamespugh You know me James!! ❤️🩹🇺🇸🙏🙏🇺🇸❤️🩹
@JCJustice-kv2gy9 күн бұрын
Pretty
@cw2a9 күн бұрын
@@JCJustice-kv2gy 🙏🇺🇸❤️🩹🇺🇸🙏
@livingintheLight.9 күн бұрын
The ol beer can special
@cw2a9 күн бұрын
@@livingintheLight. Yes sir!! ❤️🩹🙏🇺🇸🇺🇸🙏❤️🩹
@heavyleadenthuasist389 күн бұрын
Where do you buy those and what are they called?
@cw2a9 күн бұрын
@@heavyleadenthuasist38 Good evening!! I have a die that makes them in 35 cal. These are 10mm I picked them up @ Sage Outdoors.
@cw2a9 күн бұрын
@@heavyleadenthuasist38 They are called PLAIN BASE GAS CHECKS. 💥🤘🏼🤘🏼💥
@heavyleadenthuasist389 күн бұрын
@@cw2a thanks 👍
@ernvhalik39339 күн бұрын
What diameter bullets are those
@cw2a9 күн бұрын
@@ernvhalik3933 Good afternoon! Those was 40/10mm for my 400 Legend project rifle.
@ernvhalik39339 күн бұрын
@@cw2a nice I have mold that does 180 grn
@ernvhalik39339 күн бұрын
@@cw2a been looking for some like that for .452 plain base mold
@cw2a9 күн бұрын
@@ernvhalik3933 I picked up these @ Sage Outdoors
@ernvhalik39339 күн бұрын
@@cw2a there’s a guy that makes dies to punch them your self I have one for 30 cal for gas check shank bullets just haven’t ordered one for .452 plain base