I wouldn’t call it useless Pete. Most guys starting out know nothing about this, so it’s all useful.
@petestools4 жыл бұрын
COOL THANKS
@berniecahill3096 Жыл бұрын
thanks Pete you saved me a big headache of looking that up individually well worth my time to watch
@petestools6 ай бұрын
Thanks
@rickyricardo35512 жыл бұрын
FYI for everyone the AG60 has three different sizes available one is a .03(around .8mm) and the other is a .45 or something but I believe its a 1.1 or close to it and you can find a 1.3mm so three different sizes for the ag60 but you have to be careful because alot of sellers don't know the nozzle size .
@petestools Жыл бұрын
cool cheers mate
@RichardCummins-ni4em Жыл бұрын
Cheers Pete, I enjoy learning here. The longer tips I find much better for cutting along a straight edge guide, I have modified a $20 Bunnings rafter square, great but too thick for short tips.
@petestools6 ай бұрын
great tip cheers
@AndysDogHouse2 жыл бұрын
Hey Pete. Great video. I just bought myself a cheap cut 50 plasma cutter for hobby use. When I bought the unit, I also bought the extra tips that were shown with it. When they came, the tips didn't fit. HUMMMM. So I am doing some research and I found your video. I thought I should order cut 50 tips, but they don't come that way. Your video taught me a lot. So I subscribed to the channel and maybe I'll learn some more from a good ole Canadian boy like myself. ( Ontario).🍁👍👍
@petestools2 жыл бұрын
Hi Andy ,Why were they wrong mate ???
@AndysDogHouse2 жыл бұрын
@@petestools They were not even close to the right diameter. The tips were the double-ended type and mine take the screw-in type. The ceramic end was too small. I don't know why they showed them along with my cutter. They took them back, but it is just a big bother. I guess that is where the saying came from ( a picture is worth a thousand words) LOL
@seanseoltoir Жыл бұрын
My unit came with a P80 torch and my first electrode lasted me about a day... The orifice is now 2-3 times larger than it started out as and the inner electrode has actual swirl patterns engraved it it at this point... Just doing some test cuts in sheet metal and a piece of 5/8" rebar... Probably less than 24" of cutting total... I think I need to work on my technique a bit... :(
@petestools6 ай бұрын
yea mate mostly 70% art 30% skills
@JeffinTD2 жыл бұрын
Here in the states, a person can buy an Everlast hatchet 60 or Primeweld 60 for reasonable, but get an (Italian made I believe) ITP60 torch. You can get 1.1, 1.0, 0.9 in a variety of styles (standard, long reach isolated drag tips, whatever).
@petestools2 жыл бұрын
Wow nice cheers
@monkeygutz692 жыл бұрын
Watched about all of your vids. They're great!
@petestools2 жыл бұрын
Thanks my friend
@messylaura Жыл бұрын
very useful on the tip hole sizes, thanks
@petestools6 ай бұрын
welcome
@huxbar1111 ай бұрын
hey pete thanks for your videos they have been of great help to me
@petestools11 ай бұрын
Glad you like them!
@catrat19674 жыл бұрын
Thanks Pete, been watching your video's, don't have a cutter at this point, but will one day!
@petestools4 жыл бұрын
Right on!
@TheSnakeman34 жыл бұрын
As always , thanks Pete.
@petestools4 жыл бұрын
Very welcome
@iprangem3 жыл бұрын
Thanks for the TIP ;-)
@petestools2 жыл бұрын
You bet!
@simonharris18043 жыл бұрын
Thanks Pete for the useful information just what I need to know 👍💯🇦🇺
@petestools2 жыл бұрын
Glad to help
@udayrandhawa4192 жыл бұрын
Your song is nice
@petestools2 жыл бұрын
YEA i am a rock star lol
@rudyrivera52563 жыл бұрын
Hey! Pete, I just purchased a “Primeweld plasmas cutter! What other tips can I use?? Thanks!
@petestools3 жыл бұрын
What torch are you running now ?
@cleonmcdonald15853 жыл бұрын
Pete I have a problem with my sungold plasma pilot arc not working it pilot arc at first and then nothing
@petestools3 жыл бұрын
check your ceramics
@user-dh2ht8zi8i8 ай бұрын
all due respect please do more research on the tips before making comments on the depth and air pressures needed to cut ,eg a 1.1 mm can cut from 1mm to about 6mm a 1.3 mm can cut from 6mm to 10 mm and a1.5 can cut 10mm to 18mm and 1.7 10 to 25 mm depending on your generator also you will not pierce 40mm with a 1.1mm tip etc etc etc you can cut 55mm with a 1.7 and 1.8 mm tip