Very well done. I had no idea about the UV curing adhesive... I'll be getting some from you right away.
@vayvma4 жыл бұрын
Thank you very much! Exactly what I was looking for to be explained 👍
@PLEXIGLASTV4 жыл бұрын
😊 thank you, we are delighted that our video was helpful for you
@smartlook57032 жыл бұрын
Hello.... When we stick a plexiglass panel to another to get more thickness and a larger size, then cut it in the form of a prism and polish it Is it possible in this way to get a prism? Can we get the colors of the Rainbow ? Is this how we can refine it into shapes without problems?
@esmael.583 жыл бұрын
Is this adhesive is like solvent glue? Is this adhesive affected by water ? when using it on Submersible pieces in the water ? My regard.
@PLEXIGLASTV3 жыл бұрын
Hello, on this page you will find more information about bonding PLEXIGLAS® and further information about our adhesives as well as instructions: www.plexiglas.de/en/service/processing/bonding-plexiglas If you have further questions please contact us via the following contact form: www.plexiglas.de/en/contact Many greetings, Your PLEXIGLAS® Social Media Team
@aes300062 жыл бұрын
Hi! Is there some glue to bond plexiglass with wood? Thanks!
@sambaker56492 жыл бұрын
Would I be able to do this with 2 12”x24” sheets easily in your opinion? And would that tube be enough?
@FoxyCanDoIt4 жыл бұрын
hey there i was just wondering where i live max thickness of plexiglass you can get is 1 inch but i'm looking into building an aquarium that needs 2 inch. would this work with two panes of 3ft by 12ft by 30mm thickness and if it does (i'm guessing it'll be a difficult job cause heavy and a lot of glue). but if done would it act as one big pane of acrylic and would it meet safety margins for the aquarium? i know this may be hard to answer but been looking all over the place can't find anything on it.
@PLEXIGLASTV4 жыл бұрын
Hello SennaFoxy, thank you for your interest and your comment. Please feel free to contact one of our PLEXIGLAS® fabricators with your question: www.plexiglas.de/en/service/fabricators#plexiglas Many greetings, Your PLEXIGLAS® Social Media Team
@nestorrodriguez77263 жыл бұрын
Did you found a solution to your problem? I’m building a pond and I’m running in the same issue.
@kwangweiong61352 жыл бұрын
Hi, I joined two pieces of laser cut clear acrylic face to face with Acrifix 0192. I noticed many very fine and short crack lines in the joined area. Is this normal? How to prevent the crack lines? Grateful if anyone can help.
@madarakis Жыл бұрын
Please I have a question. How do you clean the edges from this glue?
@smartlook57032 жыл бұрын
Hello.... When we stick a plexiglass panel to another to get more thickness and a larger size, then cut it in the form of a prism and polish it Is it possible in this way to get a prism? Can we get the colors of the Rainbow ? Is this how we can refine it into shapes without problems?