POCKET MILLING USING MASTERCAM X7

[@chuancai8238]

It's great video! I'm learning MasterCam 2023, it's still useful! One question: any change in parameter, can be demonstrated on the result during validation, which will be great to understand each parameters meaning.

[@bobbytriplett6443]

Tom That was a great illustration, very easy to follow.

[@tobyhummel6569]

Thanks for the knowledge , I'm a lathe and Swiss guy . Thrown to the fire of the mill so your a great help with finding where things are located . Thanks again

[@TomStikkelman]

Thanks for the feedback Toby.

[@jefftylicki1979]

Thank you Tom. Your Mastercam videos are very helpful

[@jimjam1719]

great instruction. i really love this mastercam stuff. i would like to make new friends that are masters at mastercam. current student but would like to get my foot in the door somewhere.

[@franks5128]

Vy nice usefull one thank u sir

[@ke018co1]

thanks for video especially like the way you go inti detail regaurding parameters and what some of the different parameters actually mean thanks

[@TomStikkelman]

Thanks for the feedback Kevin.

[@dahaldipak8735]

very useful video 💖

[@funtimebill]

Can you explain how its possible to do an open ended pocket? I cant get a end mill to start the cut from the side of the part. It always begins at some point in side of the geometry of the part.

[@suryaarya4490]

Very good teaching

[@MikeJohnson-qp3sh]

Did you have to highlight all entities to x form move to origin? On the X* and later versions you just hit X form origin and select the corner

[@sumanthapa665]

Hello, thanks for some of the best tutorial, simple to learn. Please, how can we edit sketch if we made some mistakes and realize after the whole part is ready. Thanks

[@elijahchannel5737]

tnx for the video sir tom,,,,very clean explanation..hope to see your next video

[@TomStikkelman]

Thanks for that feedback Elijah. I appreciate it.

[@nchuaco]

Thank you Mr. Tom. Can you help me to down load the mastercam software. I want to make drawing in my computer.

[@Cmtb125]

You have to PAY for software. You can’t just download it. Unless you know some specific people.

[@tomyjimenez]

Hi Tom my name is Tomas there is Master cam X5 out there for downloading but its a copy, so my question is if this copy of master cam, can be used with out issues? just like a licenced copy of Master Cam or whats the deal? if you or anybody can answer that asap, would appreciate it thanks

[@VM-16]

thank you Tom .Your share videos very helpful for us.

[@MrTimmmers]

Nice and clear, thanks

[@sjdarlak]

Tom, thanks for the video. Is Mastercam is the best offline programming software to learn? I am beginner here and I am thinking which cad/cam would be most all-purpose one and is not too difficult to start with? If it is then which version you would recommend to me?

[@TomStikkelman]

I have used Mastercam for 12 years and find it very powerful and user friendly. I have used it to write mill and lathe programs and also multi axis programs. Also a very strong software for 3d contouring. I personally highly recommend it. Thanks

[@sjdarlak]

Thanks for a tip and your educational videos :-)

[@Txs123]

Sir could u explain in mm to diamensions

[@krishj8011]

Thanks... good explanations

[@TomStikkelman]

krish J Thanks Krish J.

[@kooroshhaziny8992]

Thank you so much for the video.

[@charaftali5501]

Tks

[@bachk6a]

thanks. but volume is smaller

[@nenny595]

very helpful ,thank you much

[@different_video429]

Thanks it is really great job

[@saadidineshreddy6343]

Thank you bro

[@leandromunizgoncalves2228]

Amazing.

[@thiruvannamalaichandru8622]

Thankyou for so mach for video

[@rajvanshsah8]

Sir length lenght cut the jaw