I would be very interested to see this vs the GMMK Pro, as well as the mods you mentioned!
@Mike-113 жыл бұрын
I’m still interested
@Sigisss3 жыл бұрын
hello, if you can help, I was undecided too, in the end I got the id80 v2 because I like it more aesthetically, because it arrives in 4 days (They have not yet sent the gmmk pro to a friend of mine who preordered it to November) and because it is more "rare" In the end they are very similar I would go to i80v2
@Mike-113 жыл бұрын
@@Sigisss hey, I ordered the Id80 v2 as well it’s standing in front of me. I just have the problem that it sounds very holo. I used the packing foam For dampening which helped for every key beside the spacebar. Do you have any recommendations for what I can do know ?
@Sigisss3 жыл бұрын
@@Mike-11 Oi, The id80v2 suffers from hollow, i have purchase id80 2 days ago, now i don't have a id80.
@devinbrown91213 жыл бұрын
I’d go with the gmmk pro because the id80 integrated plsye
@BrianHanme4 жыл бұрын
Great video! Really appreciate you walking through the QMK flashing process
@HipyoTech4 жыл бұрын
Glad I could help! Thanks for the support!
@brasilianloser4 жыл бұрын
Built one and the wife liked it so much that she took it from me. And she always hated small keyboards preferring full size. But the combination of this keyboard with OSA Sleves Keycaps and Glory Pandas lubed and filmed won her over.
@HipyoTech4 жыл бұрын
Hahaha that's awesome and sad! This board really puts out it's pretty great! 🥰🤠
@Pa1nL3zZ3 жыл бұрын
Mod it! I need to know if a silicone mod would improve or completely remove the hollow sound. Such a great keyboard but that hollow issue makes it not really handsome for me
@tenyoki3 жыл бұрын
Omg Hipyo.. Your flashing guide helped me so much. Im on the ID80 V2 iso and could NOT figure this out. The reset mode was key. Even the guide sent to me by idobao was wrong. Thank you so much. Much luv, keep up the good music my guy.
@HipyoTech4 жыл бұрын
Join this channel to get access to perks: kzbin.info/door/XlDgfWY2JbsYEam2m68Hywjoin And join my discord and tell me what you think of this video! discord.gg/kPfDvDwW6R
@devtektv59064 жыл бұрын
hey man! love your vid. but the link in via flash guide is not working. please fix or provide an alternative. thank you!
@Nga_Babaye4 жыл бұрын
Put some silicone and/or some door gasket in there and see if it takes away that echo. I am sitting trying to decide if I want the full acrylic one.
@dhoffnun4 жыл бұрын
Informative, interesting, and well-produced - really enjoyed the video. The final build sounds amazing! It's deeper than a thock... maybe a THUNCC
@HipyoTech4 жыл бұрын
Thank you very much!
@SpltPersonaltyOF3 жыл бұрын
Ah yes, "medium quality" USB-C cable. My favorite quality level of cable
@Rawrenzify4 жыл бұрын
Thank you for posting this! I was thinking of buying this for my first build
@HipyoTech4 жыл бұрын
Glad that I could help!
@mattkoolets3 жыл бұрын
I added 1 layer of Shelf Liner foam on the bottom case, perfectly did the job of reducing the hollowness!
@OmmegaTang3 жыл бұрын
Thanks for your comment I was looking for someone who test it !
@valentinstern46843 жыл бұрын
@@OmmegaTang There is a Silencing foam specifically for the id80 on candykeys. Heres the link: candykeys.com/product/id80-silencing-foam . Im not quite sure if it fits in the id80v2 tho
@mattkoolets3 жыл бұрын
@@valentinstern4684 that's only for the V1 version. The V2 version doesn't really have enough space for any foams because the Integrated plate and acrylic bottom is too thick
@stefanusrianto87813 жыл бұрын
when you put that in, does it close the underglow to shine?
@mattkoolets3 жыл бұрын
@@stefanusrianto8781 Not at all, still glows brightly
@virrze4 жыл бұрын
your video encouraged me to buy it while I wait for my GMMK pro :D depending on how good this is I might end up cancelling my GMMK preorder
@HipyoTech4 жыл бұрын
Hope you enjoy it!
@king_dmj52804 жыл бұрын
@@HipyoTech Can you please make a tutorial on how to make a silicone dampening solution for the id80 V2?
@HowTo-hl5rf3 жыл бұрын
hold up why am I in the same situation,I think we should both get this board max it out and wait till the gmmk pro is readlily available thats what im going to do so I can avoid the 70 dollar reserve
@virrze3 жыл бұрын
@@HowTo-hl5rf I'm still getting the gmmk pro after all of this!
@takoyakeys4 жыл бұрын
NICE. Sounds way better than v1, Idobao did a great job making improvements this quickly!
@HipyoTech4 жыл бұрын
Agreed!
@tacodyr3 жыл бұрын
ayyy thanks for getting the iso layout! It's pretty cool imo, since it's the only layout i have ever used.
@mokemaoos62144 жыл бұрын
How do you only have 5k subs?!?!?! The editing, camera and general quality is top tier and fucking epic Big up bro
@HipyoTech4 жыл бұрын
Thanks!
@eggscrambled4 жыл бұрын
looks amazing with the cafes
@HipyoTech4 жыл бұрын
soooooo clean
@undergroundguy45044 жыл бұрын
Make a mod tutorial I just found my next keyboard case 😍
@whosurjustin4 жыл бұрын
Good informative review. I had an ID80 v1 and I couldn't stand the hollowness of that board. V2 seemed to have improved on that greatly, but it still sounds a bit hollow unfortunately :(
@brylx92303 жыл бұрын
I just bought this keyboard and used ur discount code!!! Can’t wait to build my first keyboard.
@montpercy40503 жыл бұрын
thanks to this video coming up in my recs i finally found an affordable, white hotswappable tkl!!! thank you so much!!
@seandejong53994 жыл бұрын
thats one of the only keyboards with a hotswap iso pcb
@WorthlessBanana4 жыл бұрын
The melody96 also has a iso hotswap option
@mansgrankvist30353 жыл бұрын
Bm60 iso also hotswap.
@mildmannered10863 жыл бұрын
@@mansgrankvist3035 but BM60 issa stoopid layout, the '?' key gets moved past the arrow keys 😞 I almost bought a few 😄
@mildmannered10863 жыл бұрын
@@WorthlessBanana What do you think of the Melody96 case though? The bevel weirds me out
@WorthlessBanana3 жыл бұрын
@@mildmannered1086 yeah it feels a bit to tall for my taste
@EngraMoon3 жыл бұрын
PSA: This keyboard is shown as "in-stock" on their website, but its inventory is SERIOUSLY BACKLOGGED. People who ordered months ago have yet to receive their order, especially for the white colourway. The company do not reply to emails frequently and a lot of people are wondering when their shipment is being sent out. There is essentially little to no customer service. Buy at your own risk.
@cognition264 жыл бұрын
why does this sound so good
@rileynicholsiii54093 жыл бұрын
cause the man is a pro, duh
@pafawag5b6b5b3 жыл бұрын
agree
@flytlies3 жыл бұрын
That keycaps set is very much a coffee lovers taste 😍😍😍
@Knightwwing3 жыл бұрын
2:13 I physically recoiled holy shit
@mrb-btw3 жыл бұрын
ikrrrrr
@emilzexkk7354 жыл бұрын
Hey do you remember me? My SK68 just arrived! Have some with the epomaker software, can't change the lighting except on driver1, and if I change some keys on a layer like layer1, the lighing will just go off until I factory reset it in the settings of epomakers software. Gonna mod it a little. Not comfortable with lubing my switches tho. So just some foam on the bottom and definitely some lube for the stabilizers. Will keep you updated! :D And yes, would love a mod video on the Id80 V2!
@HipyoTech4 жыл бұрын
Hey! I remember you of course! Join the epomaker discord for some support, they have good help over there. And post some pics in my discord of your mods when you are done!
@emilzexkk7354 жыл бұрын
@Hipyo Tech I'm definitely gonna post some pictures of when it's done. Looking for some middle of the road pricing PBT keycaps for it, sth BoW or so. Not in a hurry tho, stock ones are pretty nice.
@neelg77364 жыл бұрын
Great vid!! Super helpful for a keyboard noob/function row enthusiast!!
@HipyoTech4 жыл бұрын
Glad it helped!
@ok2full4 жыл бұрын
this board looks a lot nicer and you get way more out of it than a drop CTRL the only weird than about that layouts on their boards is that blank space. but if these were a thing a few years back when i grabbed a drop CTRL when i first entered the hobby i would have rather gone with this board especially with screw in stab support sheeeez no brainer. if you kiddo's are contemplating this or a drop ctrl id grab this any day for your first little budget build. gat yellows are the food stamps of the switch industry change my mind
@LongggJunnn3 жыл бұрын
Hey, can I just ask what is the red "washer" looking thing at 3:13? Is it the o-rings from kbdfans?
@loopingluiz4 жыл бұрын
nice video man, i just finished building my V2. Are you going to mod it to get rid off the remaining hollowness?
@HipyoTech4 жыл бұрын
I'll potentially revisit it in the future, but I have a lot on my plate right now. I would do a very similar mod to my silicone mod I did on the Id87.
@zed80804 жыл бұрын
I just tried to google how to install screws using a jump cut (3:42)... it took a while to figure out you were talking about editing the video. TIL a jump cut is removing the boring video parts. Sigh. Great video, do a mods one please.
@HipyoTech4 жыл бұрын
Hahaha thank you!
@TheAsianNerd4 жыл бұрын
Hell yeah it looks exponentially better than V1
@ashcullen98354 жыл бұрын
Great vid man really well done. Thanks for all the info
@HipyoTech4 жыл бұрын
Thanks!!
@gonzoalbonzo69 Жыл бұрын
The link for the firmware invite is expired, is there another way to get access to that discord to get the tutorial of setting up firm ware?
@crocobye4 жыл бұрын
Never tought a keyboard would look so amazing the build quality looks exeptional those Cafe Keycaps look so darn good on this keyboard. Btw Hipyo i'm looking for a new keyboard got any toughts on the GMMK ICE WHITE from Glorious looking to buy either the TKL or the 60% one.
@HipyoTech4 жыл бұрын
Personally never seen it, but maybe ask the discord!
@crocobye4 жыл бұрын
@@HipyoTech Good Idea😅 Thanks!
@LogimonYT4 жыл бұрын
i've seen your video recently, i must say you deserve a subs and like. very great quality both video and sound. anyway i just wondering if this V2 comes with the foam? if not, can we use the V1 foam instead? looking forward for the answer. thanks in advance. best of luck on your channel ahead!
@HipyoTech4 жыл бұрын
It does not come with the PCB foam, and does not really need it. It still needs case foam of some kind.
@LogimonYT3 жыл бұрын
@@HipyoTech hi, my V2 just arrived last week. Just wondering where to put the case foam? It’s tight already.
@notroholix62404 жыл бұрын
looks amazing!
@HipyoTech4 жыл бұрын
Thank you!!
@noahhyun31724 жыл бұрын
You seem like a cool/nice guy, so I subbed and liked on both of my google accounts. I wish you the best of luck (as you're doing this full time)!
@HipyoTech4 жыл бұрын
Thank you so much for the support!!!
@hungryewoks4 жыл бұрын
I wonder how big of a difference the 'gasket mount' is. Wondering if I should wait for GMMK Pro or get this one.
@stevenr35444 жыл бұрын
Or both
@blukenzxy32584 жыл бұрын
Dude what backround is that? 5:49
@lihaiou4 жыл бұрын
Bruhhhh this is so cleaaaan. And the video is pretty cool. But I got a question: is it still an integrated plate design like the v1?
@HipyoTech4 жыл бұрын
Yeah still integrated plate but its thicker I think
@SuperKMao3 жыл бұрын
Great video dude. Bought one because of your review. I've read there's been a few issues with PCB and LEDs shorting out - any issues on your end recently with it?
@HipyoTech3 жыл бұрын
I personally haven't had any issues, just make sure your computer is properly grounded
@SuperKMao3 жыл бұрын
@@HipyoTech side question - I'm thinking of buying and putting sorbothane between the acrylic and PCB once it arrives - is there enough space?
@soulsqueezer40223 жыл бұрын
@@SuperKMao Mine short circuited the moment I connected it. In the Idobao discord a lot of people have the same problem.
@KennethMao3 жыл бұрын
@@soulsqueezer4022 I saw that in the Discord after I ordered it and basically did everything to make sure I statically discharged myself, grounded my laptop, and kept my desk free from static before I opened it up to mod it. Might have been overkill but I haven't had any issues at all during regular use either and I've opened it up a few times. I have seen people say it shorts out a few weeks in. I've had it for about about a month now and no issues. Definitely not something we should be worried about so if you are worried, there are other options out there! I personally am looking forward to the GMMK Pro I have coming in the next few months hopefully.
@soulsqueezer40223 жыл бұрын
@@KennethMao Yeah, I am pretty disappointed to be honest. Not that I like under-glow too much, but still this should not be happening. I would get the GMMK pro, but I don't like the silver color. They call it "white ice", but it just looks silver to me.
@keyboard_4 жыл бұрын
I bought it yesterday but now the pcb for id80 v2 is out of stock, it will takes more days :( can't wait to assemble it
@HipyoTech4 жыл бұрын
Very excited for you!
@nicnic67973 жыл бұрын
Can you leave the backlight for the keys off while having the underglow on? :O
@tamegaming17683 жыл бұрын
Honestly, I've never experienced the soft flex of a gasket mount so maybe I don't know what I'm missing, but I really don't mind the integrated plate of my ID80 and quite like the sound signature too. If the V2 were $150 instead of $200 it'd be a far easier recommendation
@RedShedG2 жыл бұрын
You really don't miss anything out. I've got the gasket mountet keychron q3 and i literally feel no difference compared to a non gasket mounted keyboard
@eldenbladesofficialshop3 жыл бұрын
Can't find any key cap set with the big enter and the small shift so annoying
@seta_souji4 жыл бұрын
MOD THE BOARD!
@jaimerodriguez38643 жыл бұрын
Nice board. Can you measure the front height of the case? I would like to carve a wood wrist rest for it and i need that measure. :)
@pyff21314 жыл бұрын
Great review! I'm thinking of getting a new keyboard so this would be great! Thank You!
@HipyoTech4 жыл бұрын
Glad I could help!
@boopypooproductions48683 жыл бұрын
@zuf if you have 200 dollars and are looking for a new key board you should buy the apex pro tkl it has a 0.04 millimeter actuation point
@pyff21313 жыл бұрын
@@boopypooproductions4868 I don't think you know much about keyboards, gateron yellow switches are faster and way cheaper
@boopypooproductions48683 жыл бұрын
@@pyff2131 I do you have the money to buy this and the apex pro til is much better tho you don't make it the apex pro is better I think you don't know much about keyboards because I have tried both keyboards
@thatonedom19283 жыл бұрын
Apex pro is good for gaming, it has really smooth switches but it’s stabs are very bad. Gat yellows are faster, cheaper and you can put them in any build and you can make them sound 10x better than the apex pro
@Riley.z284 жыл бұрын
Could you please mod the keyboard I want to hear what it sounds like cause this might be a potential board i get. But I loved the video man keep it up
@thinkrtank9914 жыл бұрын
Great video and editing my dude! Question for ya: Any idea where the Pervail Co is located? Thank you!
@HipyoTech4 жыл бұрын
Florida!
@SladeyShoots3 жыл бұрын
You should review the k65 mini. Just because i would love to hear how you would swap switches and what switches you would put on. Because i got mine with cherry mx reds and im finding some switches really scratchy. :)
@NationTheShadow3 жыл бұрын
Awesome review, this channel is super underrated. Btw 1 - 10 how much you rate this keyboard for it's price ?
@HipyoTech3 жыл бұрын
probably around 7-8
@mrteknas3 жыл бұрын
Hey my ID80 underglow LEDs have stopped working. I had flashed it and had been using VIA. Fn+Q doesn't toggle underglow anymore. Please help.
@voglbenedikt24604 жыл бұрын
how do i get the hex file the discord invite doesnt work anymore
@kiroooooooous74923 жыл бұрын
Would adding foam improve the acoustics of it?
@HipyoTech3 жыл бұрын
Yep! Or a silicone dampener so it doesnt block out the underglow!
@MrDalugoga3 жыл бұрын
@@HipyoTech a tutorial would be nice! Or a foam vs silicone comparison.
@kiroooooooous74923 жыл бұрын
@@HipyoTech It just arrived today! I ordered it cause of this video and I am not disapointed. It is much heavier than I expected it though.
@HipyoTech3 жыл бұрын
@@kiroooooooous7492 Glad you like it!
@wegronaut3 жыл бұрын
Are you going to do a silicone mod for this? Not sure how I would go on about this since it's an integrated plate, would you do it the same way you did it on the V1?
@bangerwang4 жыл бұрын
Is the spacebar 7U? Great build and video as always!
@HipyoTech4 жыл бұрын
6.25u and thanks!
@bangerwang4 жыл бұрын
@@HipyoTech okay so I would need to get Durock stabs with the 6.25U correct? And I'm wondering if their new gasket mounted acrylic case that's on GB right now is the same
@soulsqueezer40223 жыл бұрын
Just got it. The underglow is not working...For anyone interested in buying, hold off until they fix it. Many many people seem to have the same issue.
@fhvawrvc82603 жыл бұрын
I don't really like the size of those bumpons but I suppose I could get bigger
@fhvawrvc82603 жыл бұрын
Love it still hearting comments on videos from 3 months ago 😁
@JGAvila903 жыл бұрын
I can't figure out how to flash my ID87 :(((( the Alt esc thing doesn't work for me
@alexd.6263 жыл бұрын
Great video. By the way, what do you think about the ISO layout, after trying it?
@kyle41273 жыл бұрын
Do you think it's possible to put a foam plate in between the integrated plate and PCB? Is there even enough space??
@pyronox92202 жыл бұрын
is the backlight for the Keys in rgb too or only the acrylic backplate lighting ?
@cityofplant3 жыл бұрын
Hi hipyo! I just ordered this v2. Does it comes with a foam?
@keybros12944 жыл бұрын
Great review and editing style! Keep it up man
@JC-pq9kd4 жыл бұрын
Sick keyboard! What’s the background on your pc btw??
@HipyoTech4 жыл бұрын
It's just some random one I found via Wallpaper Engine on steam
@suchuatto78033 жыл бұрын
hi! tips on how to remove the back acrylic cover? mine pretty hard to remove 😔
@tod.concept3 жыл бұрын
Hi, Is the "IDOBAO ID80 PLUS 75% HOT-SWAPPABLE KEYBOARD KIT" RGB Per key?
@ollybutler994 жыл бұрын
Loved it as usual, can you make a video of how to clip, band aid and lube stabs?
@HipyoTech4 жыл бұрын
Sure thing! I have a video idea to test lots of different methods soon!
@香噴噴-p6f2 жыл бұрын
why is the left shift not the standard size ? is it because of ISO layout ?
@SpartanAxel484 жыл бұрын
Loved the video, this was just what I was looking for in a new board, and thanks to you I got it! I wanted to see if you could get the link for the Flash guide, as it's expired for the discord link.
@HipyoTech4 жыл бұрын
Updated the link: discord.gg/Q8zmHr6pdE check out the FAQ channel!
@AcerAz1153 жыл бұрын
Yah ive literally did all the steps for the flash but it still won't recognize the board and everytime I hit Alt+Esc it just closes the window please help I even messaged the discord but no one responds
@abmeight084 жыл бұрын
Shipped via fedex and arrived in US in 3 days? How much you pay for the shipping costs?
@HipyoTech4 жыл бұрын
I think its around $30-$40 USD for expedited shipping
@TheBigJoshi3 жыл бұрын
I’m sick in bed right now but this vid is making me happy
@726frost3 жыл бұрын
Maybe i'm just dumb but i can't figure out if this kit is a pcb mounted or plate mounted for switches?
@SkywarsLobby4 жыл бұрын
how does the white key lighting look? It looks rather warm in the video
@blukenzxy32584 жыл бұрын
4:40 what keycaps are those?
@Llamoof3 жыл бұрын
Wondering if you used the sound dampening material for the sound test.
@HipyoTech3 жыл бұрын
Nope!
@heyrim0123 жыл бұрын
I'm thinking to buy keyboard between Gmmk pro, idbaov2 or kbd67lite, which keyboard should I go?
@gunterdienektarine38023 жыл бұрын
maybe you should first decide if you want 65% or 75% so you have less options to choose from
@chrisdotdash51543 жыл бұрын
Very nice video!
@HipyoTech3 жыл бұрын
Thank you very much!
@AcerAz1153 жыл бұрын
ok idk what im doing wrong but everytime I try to reset it it just closes the toolbox and keeps saying device undetected
@ooharloo3 жыл бұрын
Damn it I told my self to calm down after building my Tokyo60 but now I’m drooling over this keeb! But maybe I should wait for the glorious gmmk pro?
@bartsi73254 жыл бұрын
this keyboard be T H I C C
@Peej21893 жыл бұрын
How big is the spacebar for the ID80v2?
@WRSTxPumbaa3 жыл бұрын
Hey, noob question but what size stabs did you get for this Keyboard?
@loardvanh53862 жыл бұрын
how long should we expect to wait for a board from idobao?
@joowonbae4 жыл бұрын
I'm really curious on how you'll make the keeb sound less hollow if the bottom part is acryllic :/
@HipyoTech4 жыл бұрын
Clear packing foam like what the keyboard is packaged with! Or a silicone pour, check out my vid on that!
@based0013 жыл бұрын
A mod video would be great. Loved the video
@ajconnol13 жыл бұрын
What app did you use at the end for the sound test? :)
@danieln90824 жыл бұрын
Id80 v2 or KBD fans 75% v2 or wait for the Gmmk Pro🧐🧐? Please help
@HipyoTech4 жыл бұрын
Tough call, each has it's perks
@LEK4 жыл бұрын
Would definetly wait for the GMMK Pro as it is Gasket Mount which is crazy for the considerably low price point
@thatwolffe38023 жыл бұрын
I wish you could change the colour of the key lighting
@wither85423 жыл бұрын
Thank you so much for this video, it was extremely helpful! I'm looking into getting the white tkl version, but I was wondering if you knew if this keyboard had a microphone? tysm again!
@fligy24353 жыл бұрын
It does not have a microphone. I've never known a single enthusiast keyboard with a mic.
@dragos-lucian2 жыл бұрын
That spacebar... goddamn! 😍
@user-lv6rn9cf8m4 жыл бұрын
Is the only three layers thing a ID80 thing or a VIA thing? Can you increase it? I'm using tmk right now and have like... 7 layers.
@HipyoTech4 жыл бұрын
Not totally sure!
@cesargarcia9643 жыл бұрын
What’s the difference between this and the ID80 plus?
@Alomeezy3 жыл бұрын
I’d really want this 65% 😭🥺
@quartzshake3353 жыл бұрын
Is this worth over the ID80 V1? (given the price difference)
@himselfwhatanoob57813 жыл бұрын
if you were to mod it to make it sound less hollow, what would you do? would it be possible to fit in foam with cutouts for the leds?
@HipyoTech3 жыл бұрын
I would silicone mod it tbh! Check out my vid on that!
@Quilt3d3 жыл бұрын
one of my LEDs on the board will not light up what should I do?