Thank you, i just used your methods to restore the tank on my It 250k and it worked very well, shiny as new again.
@brandonquenneville73309 жыл бұрын
Being the asshole that i am online. I have to like this dude videos. He is helpful to us all.
@groutaone9 жыл бұрын
Brandon Quenneville Thanks for being a nice guy here, I appreciate you watching
@junkyardhemi7 жыл бұрын
Very nice. New plastics for my LT500R are almost $800. $15 in sandpaper and a buffer sound much better.
@caseydecocker16 жыл бұрын
junkyardhemi rite!!!
@JMKady764 жыл бұрын
Good video, the razor blade is what I've been missing! I spent 2-3 beers sanding on my Tri-moto plastic last night fighting with that chalky layer.
@ZRR983 жыл бұрын
By far the best video on how to restore old dirt bike plastics!
@marcus82817132510 жыл бұрын
Thank you very much for this how to! I was wondering how to make my year 2000 Suzuki DRZ 400 look better, the plastics had gone all porous from the uv damage and this worked a treat! looks great already and I still havnt buffed them up with the polishing wheel. cant wait to see the final product. thanks again !
@anthonybaltera65564 жыл бұрын
You can actually hear in the shaving when you start to hit healthy, polish-able plastic. Thanks for the tips. Liked and Subbed
@ryanmoses42011 жыл бұрын
I sanded the fenders on a IT 175 and they came out smooth, but i cant get a shine on them. I think ill try with a dry buffer like you did. Thanks for the idea and I cant wait to see your yz fully restored!
@DEEJAAY414 жыл бұрын
Love youtube for stuff like this. All things considered, things like this help me to save a bunch on my rebuild.
@mikejones-qk2ou8 жыл бұрын
Good Job! I tried the sanding and didn't get good results! So after sanding I tried 000 extra fine STEEL WOOL with Johnsons past wax and rubbed off, then added more wax and buffed with the buffing wheel and got FANTASTIC results on my Honda XR200R!
@liamobrien44878 жыл бұрын
I have a xr80r
@henrik79667 жыл бұрын
If you have a look at my dirtbike on my channel you will see I have pretty bad plastics... I have some steel wool. I've heard this works pretty good. Any suggestions?
@gedionsamuel22563 жыл бұрын
Extremely useful information on scratched plastics in general! Thanks
@danielcooper576711 жыл бұрын
Very nice DIY, plastic can be a real difficult thing to work with and proper time and prep has amazing results!
@jean-francoisbrousseau248511 жыл бұрын
Thanks, I have quit a few wear and tear on my KLR 2009 and now I know exactly how to fix it over the winter. Thanks man.
@bobtaylor328110 жыл бұрын
Great video. This is exactly what I have discovered as well. Just wish I had seen this video a couple months ago when I had tackled an ATV plastic project for my son.
@onewaywolf35304 жыл бұрын
Thanks for sharing this technique! I also worked out, if you are moving along the plastic from left to right to have the drill spin in reverse or vice versa. You don't need to hold the buffing wheel at an angle either. Keep it 90 degree's. Just let the buffing cloth "kiss" the plastic whilst moving slowly down the piece giving it enough time to do it's job. Best to be in full sunlight to see better results! If you feel the buffing wheel grab slightly you're pushing too hard! Just lightly brush over it in one direction ONLY!! Not back and forth motion. If it grabs and leaves a mark hold the buffing wheel over the mark with very light pressure checking it until it's gone. To really make it shine, spray on Mequiars Ultimate Quik Wax - with hydrophobic polymer technology and let it soak in. Maybe a couple of coats. Then use a microfiber cloth ONLY to finish polishing! The end result will amaze you!! :)
@Sms6810 жыл бұрын
I did this to my 98 DS80. I had deep horizontal scratches across front fender. the razor blade leveled every scratch out to a level service. I polished it up after and the Fender looks brand new. Great Job....
@groutaone10 жыл бұрын
Cool, love it when a plan comes together
@Sms6810 жыл бұрын
I went to order Plastics and they were a fortune for this Bike. I'd end up spending about 500.00 for Plastics. Krazy... Great Job!
@OneBitStream10 жыл бұрын
Best demo video, on youtube, of this subject. I'm cleaning up my YZ125 fenders using this method. Nice work!
@franciscoluna95965 жыл бұрын
awesome video. There are curved card scrapers available to there used by woodworkers, can be very helpful at curved areas.
@harperjmichael11 жыл бұрын
It's amazing how UV rays will mess up some plastic. And that first part with the blade was nearly like fingernails on a chalk board! lol
@DoosBarry7 жыл бұрын
Scraping the plastic looks like it'd feel real good
@watchmanonthewallcouk64986 жыл бұрын
Love those old strokers... like everyone we all wish we never sold any of them !
@79gsonethousand11 жыл бұрын
Ive used just a medium grit emmory cloth and gradually going to a smaller grit untill the plastic turns into a clean smooth matte finish. then i took a propane torch and went across the sanded parts.It melts the face of the plastic very quickly and dries to a perfect gloss, a good wax after it cools makes it better even.Have to be very quick and even about it though, so you dont over do it, works well on black and coloured plastic. I found the heat gun takes too long. Your idea seams to work pretty nice.
@jeremyx32727 жыл бұрын
By far the best channel I have subscribed to.
@DirtRider500R11 жыл бұрын
Dood! I wish you would've posted this before I went and bought new plastics! Haha. Definitely going to be trying that on the 86er's tank tonight. Might post up a video if I find a tripod.
@ncimson531811 жыл бұрын
this is why I dig youtube...learn so many stuff on here...some good some bad but mostly good :D
@evanwalkerdesign11 жыл бұрын
Best vid like this out there. Thanks for the demo!
@madtater59485 жыл бұрын
they make a plastic compound for polishing plastic it comes in a stick you apply it to the polishing wheel it helps to polish the plastic
@jtbassgambler25949 жыл бұрын
thanks groutaone the best ideas I've ever seen.... you're the man!!! appreciated the tips...keep the good work buddy.
@groutaone9 жыл бұрын
+I vote for truth democrats tab Thanks for watching, I have found not all plastic responds as well as this fender, also sanding is better than the blade to keep from damaging the plastic, thanks again
@Mr549er5 жыл бұрын
WOW good job , takes me back to early 80s raced that 250 a few years great bike love the motor :-) , cheers-
@2stroke4me11 жыл бұрын
This is great, i wanted to restore my old MTX to it's former glory but the scratched plastics were holding me back. Thanks so much for sharing :)
@jackjohnson654 жыл бұрын
Thank you for the video, I have a Kawasaki kdx 200 that I am restoring which has good but faded plastic.
@richardquebec58509 жыл бұрын
You my friend is really a nice man to show us this. Thank you very much.
@ryanblanco58666 жыл бұрын
Thanks for the vid! Gonna do this to my ‘84 yamaha XT250
@Cumminsmaniac1611 жыл бұрын
intresting. i enjoyed watching this and seeing the yz465
@PadmaDorjee Жыл бұрын
This was extremely helpful, THANK YOU.
@fnaguitarplayer911 жыл бұрын
Definitely will remember this! Great trick!
@nikod3mr11 жыл бұрын
Thank You very much for tips, they will rly help me polishing my motorcycle plastics (also yellow) Good luck with rebuilding this bike ;)
@MultiUnanimous11 жыл бұрын
haha thanks ,My step brother blew it up , but once I get her running again it sure will be a blast haha ,Been thinking about putting the 500 engine on my 250 frame kinda like you did with your Cr haha :D
@liftedXmudXdigger11 жыл бұрын
Hey I have a couple of ATV"S I did that looked like that. What I did was 220 320 and 400. But after I did it in that step I took 1000 grit to it and it made it super smooth. you can find 1000 grit at any automotive place. ( all wet sand don't use to ruff of sand paper)
@Stevechap6911 жыл бұрын
I think ima try this on my elsionore125 ! thanks for the very helpful info! and great explanations too!
@robplotts94127 жыл бұрын
Love the old yamahas. Quick technic nice
@nicholashargraves791911 жыл бұрын
Thanks im going to try it on my atc
@TheEZGZ11 жыл бұрын
she will be looking good for a while. Nice work
@Daniel96sj11 жыл бұрын
Nice, turned out looking good.
@groutaone11 жыл бұрын
Where you see this discoloration is likely around the edge of the area that got heated, try heating from one end of your fender and work your way to the other end without stopping, it will be a lot of heat on the entire piece in a short time so it may distort, maybe test on a junk one first
@thomasgronek64694 жыл бұрын
Great video, thanks.
@groutaone11 жыл бұрын
I did in fact try some tooth paste on the polishing wheel, didnt work well on the fender but it smells nice ha ha
@groutaone11 жыл бұрын
The sanding block you could find in the paint secton at Home Depot or any store like it
@nitrosport511 жыл бұрын
Damn, wish i would have seen this when i was rebuilding my 89 FL400 Pilot. I used the plastic renew clear and it wasnt all that great. and like you said it easly wears off. Going to try this on an old plastic roof panel i have. it was white when i got it lol. supposed to be red. May post this video on a forum if you dont mind!
@TheSHERIE6810 жыл бұрын
The yellow is great, but the scrap, scrape, scrape reminded me of digging out the corner of one big toe.
@wayofthesamurai9011 жыл бұрын
Thanks!! Im gonna do this on my ktm
@bobalou80811 жыл бұрын
Good stuff, going to use my knowledge gained restoring my 80 KDX400
@darcyklyne11 жыл бұрын
Thats brilliant! In more than one way sir!
@groutaone11 жыл бұрын
Thanks for watching, will it work to sand the marks out of the plastic?
@erlendse11 жыл бұрын
Not that I got some immediate need for fixing plastic, but this is clearly something to keep in mind for when needed :) b.t.w. I mostly like tricks and "how x works" videos.
@HorsepowerGarageVideos11 жыл бұрын
I used to steel wool to restore my yz's plastic, it worked better than sand paper.
@trackrash2 жыл бұрын
Wow that was cool!!
@groutaone11 жыл бұрын
Its got to be real smooth, 120 is going to be too rough to start with I think, also it seems not all plastic will respond well to polish, my gas tank doesnt work as well as my fender
@CurvedSlightly4 жыл бұрын
4:57 "Here's one I wasted my time with earlier..."
@tonymontana2.03710 ай бұрын
Does this work well on fenders that have been exposed to the sun for a long time? I can't get mine to get the gloss back.
@elmerfox687210 жыл бұрын
Thanks for taking the time!
@groutaone10 жыл бұрын
Thank you for watching
@groutaone11 жыл бұрын
Post away my friend, your idea to try on a spare piece is a good idea, not all plastic responds to this procedure it seems
@ParadoxdesignsOrg11 жыл бұрын
great tip. I'm trying to wonder what I could use this on now..
@groutaone11 жыл бұрын
Thanks for watching
@leonardoabc16399 жыл бұрын
really good!! thanks man
@ryanb23693 жыл бұрын
Good info here, Thanks!
@McCozzy11 жыл бұрын
Awesome work again always better to fix it than buy it keep it original
@groutaone11 жыл бұрын
I would think its called a drywall sanding block, its got a soft foam centre
@groutaone11 жыл бұрын
I wonder how a construction heater would work, would be like a giant heat gun
@giulianoMX4 жыл бұрын
Very nice done!!!
@groutaone11 жыл бұрын
KX500, I salute you
@groutaone11 жыл бұрын
Funny guy lol, dont make me come over there, but if I do maybe I take the drum set with :)
@KenyonPayne11 жыл бұрын
I figured out that I was doing this all wrong, I didn't wet sand with 120 grit, so it really messed things up. I wet sanded with 220 for a while today and it actually turned out not too bad, gotta get some 320 and 400 grit waterproof sand paper soon, also I found the plastic on gas tanks is much harder than the fenders
@yukon21592 жыл бұрын
Amazing !
@scottphillips10567 жыл бұрын
Nice! Thanks for making the video!!!
@skulledmonte8411 жыл бұрын
Damn it !!! why'd i have to watch this ,now i want to do my that to my 78 yamaha 125dt
@bobalou80811 жыл бұрын
Your right Uni trak did come in 81 on the KDX
@83PoWeRrAm11 жыл бұрын
nice that will be a fun bike
@groutaone11 жыл бұрын
Thanks, yep more buggy build vids in the works
@israeljack44523 жыл бұрын
pro tip: watch series on Flixzone. Me and my gf have been using it for watching a lot of movies these days.
@KenyonPayne11 жыл бұрын
I can't get this to work, I tried 120 grit and it scratched it really bad, and I tried 300 and 400 grit wet sanding and it didn't seem to fix it up. I tried using the blade and it really messed it up. Then I tried using one of those 3m head light kits and it seemed to fix it up but now I can't get the shine into it
@francoalvau872110 жыл бұрын
Great video! Thanks for sharing
@groutaone10 жыл бұрын
Franco Alvau Thanks for watching
@richardmourdock27196 жыл бұрын
Very helpful... Well done!
@nachosplay-ground901711 жыл бұрын
hey i did this trick to my old moto 4 and it was awsome what turned out i would love to send a pic to you its really cool
@MultiUnanimous11 жыл бұрын
the piston melted from being over heated ,I took it apart and looked down the cylinder wall and there are some pretty deep gouges ,and the crank doesn't operate as smoothly as it should ,So I'm gonna split the case and see if there ain't something getting caught down in the bottem end ,I just hope I don't have to replace the crank aswell as the top end haha
@KowboyUSA11 жыл бұрын
Ingenious indeed.
@cammy84011 жыл бұрын
Thank you , my 95 cr 125 might be able to have a shine once again
@taterwetzel11 жыл бұрын
nice work man! im trying to hide a huge crack in a tecate 4 front fender. there is one only one on ebay and its 899! i work at a custom paint/ motorcycle repair shop and sand ALL day it seems on harley tanks fenders but i couldnt figure out a way to clean up a shitty repair job an this tecate i have. your video was golden! now i need to figure out how to get the soldering iron marks off it where he kinda welded it together. nice work tho!!!
@NIKONOVICH19909 жыл бұрын
This has some ASMR effect :)
@brittanydibattiste90949 жыл бұрын
Great video. Have any tips starting a kick start 93 dr350 other that brute force? The carberautor fills up with gas and I believe it is flooding it if you kick like a mule it will start but im small....thanks
@AntiPlatitude8 жыл бұрын
Great technique! BTW has that kickstarter snapped off yet? Looks like it was cracked...
@fx1c3336 жыл бұрын
your actually scrapping of a lacquer they put on the plastic to hold the colour you can tell as your not scratching into the plastic. it's just a clear coat that's old car get it as well.
@TravisInCanada16 жыл бұрын
Great video, very informative.
@wjones66065 ай бұрын
Excellent...
@camwalt.41975 жыл бұрын
It seems like u would get good results usingblike 150 to srart on realy bad places then 200 for not as bad then 300 then 400 then something crazy like 600 to make it smooth without a grinding wheel
@SoppanSlut11 жыл бұрын
Look's great!
@seanjohnston8489 жыл бұрын
What's in the bucket? Just dish soap and water? Detergent?
@RoadcraftNottingham5 жыл бұрын
Very helpful, thanks.
@Soldier12875 жыл бұрын
plastic can also be welded. Want to combine the two. to do this after welding and sanding
@Ls3guy11 жыл бұрын
very good work
@mastersletten11 жыл бұрын
Does this work on any type of plastic? I got an 2003 YZ 125 and it has pretty scratched up plastic, I might try it out in a place where it doesn't show, just to be sure it works on my type of plastic. Awesome video btw :)